SPECIAL REPAIR TO BLDG NO P-322 TO 325 AT ANARWALA UNDER AGE B/R-I OF GE DEHRADUN

Amount

Taking up or down steel tubing/PPR pipe line and connections including cleaning for refixing or removal from site with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing/PPR pipe line and connections including cleaning for refixing or removal from site with all fittings for 20 mm bore GI tubing complete all as specified and directed.

S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing.

S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing.

Refixing of old steel tubing and connections in new or old position with all new fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing.

M&L for Cutting chases, pinning in, making good in cement mortar 1:6 to facings where required , for concealed water tubings etc, cutting not exc 10 cm girth.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) (using old size bricks)

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:4) but except bricks (using old bricks obtained from demolition).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

M&L for coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match including screed bed 15mm thick in CM (1:6) all as directed of floor tiles complete.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 450 mm x 350 mm, 7mm thick over and including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white cement mixed with coloured pigment to match all as directed of wall tiles complete.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified

M & L rendering 15mm thick in cement mortar (1:4) on finished fair faces of brick/concrete surfaces even and fair without using extra cement .

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete work even and fair without using extra cement complete.

M&L rendering 10 mm thick in cement mortar (1:3) on ceiling surfaces finished even and smooth without using extra cement complete.

M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper of any tint over a coat of primer complete all as specifed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved shade over a coat of primer suitable for cement base paint on walls all as specified & directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old decorated/ putty surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint of approved shade complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of wall and applying wall care putty 1 to 1.50 mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

M & L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified

M & L applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm long.

S&F in repair rotational moulded polyethylene 500 Ltrs Capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I complete all as specified and directed complete.

M&L cleaning of water storage tank capacity exceeding 250 litres but not exceeding 550 litres, mechanically using pressure pump with disinfectant chemical including cleaning & removing all scale & dirt etc from existing tanks, mouths of circulating pipes and outer surface of any description & washing down in the manner.

S&F in repair 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

Supply and fix in repair 32 mm dia PVC waste pipe for WHB and sink 90 cm long with union, complete all as specified and directed. equivalent).

S & F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete.

S&F in repair 150mm dia Bib tap short body standard of PTMT any colour high pressure screwed for iron pipe and fixed.

S&F in repair 150mm dia Bib tap long body standard of PTMT any colour high pressure screwed for iron pipe and fixed.

S&F in repair vitreous china squatting pan Orrisa pattern of size 580x440mm white with integral foot rest including connecting to trap and flush pipe anti-syphonage pipe incl provision of lime concrete bedding and making good to floor complete all as specified and directed.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete.

S&F in repairs ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 20mm-210 gms)

S&F in repair CP bib tap short body fancy type cast copper alloy 15 mm bore screwed down screwed for iron pipe or for brass ferrule complete.

S&F in repair CP bib tap long body fancy type cast copper alloy 15 mm bore screwed down screwed for iron pipe or for brass ferrule complete.

S&F in repair Angle cock, brass chromium plated, fancy type with round headed knob, suitable for 15mm bore iron pipe complete all as specified.

S&F concealed stop valve, fancy type, chromium plated of cast copper alloy with long shank and cup, concealed type, with round headed knob , screwed both ends for iron pipe or for unions and fixed of 15mm bore including taking down old stop valve.

Dismantling of cast iron or reinforced concrete or PVC drain pipes 100 mm bore, jointed in cement mortar and taking out of trenches, if required

S&F in repair Stack clamps made out of 50mm by 5mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75 mm bore CI pipe complete all as specified and directed.

S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 100 mm bore CI pipe complete all as specified and directed.

S & F 90 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including taking down complete all as specified.

S & F 110 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified. Note :- Sample of pipe to be approved by Engr-in-Chage before installation.

S & F PVC (SWR) pipe 90 mm bore single socketed in any length with rubber ring,joints laid in trenches complete all as specified.

(S & F PVC (SWR) pipe 110 mm bore single socketed in any length with rubber ring,joints laid in trenches complete all as specified

S & F in repair PVC (SWR) bend, 90 mm bore' complete all as specified.

S & F in repair PVC (SWR) junction single, (Single T) equal or unequalnd, 90 mm bore with access door complete all as specified.

S & F in repair PVC (SWR) bend, 110 mm bore' complete all as specified.

S & F in repair PVC (SWR) junction single, (Single T) equal or unequalnd, 110 mm bore with access door complete all as specified.

S & F in repair PVC (SWR) cowl, 75 mm bore' complete all as specified.

M & L in repair 75 mm PVC spun casted floor trap with CP grating of 100/ 125 mm dia including jointing with solvent cement 75mm bore outlet complete.

M&L for demolition of existing sunken portion & taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish off the premises, cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00 kg/sqm and grouting 25mm thick cement concrete type cement type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (b) M&L for two coat of acrylic cementitious water proofing coating (Dr. FIXIT pidifin 2K manufactured by M/S Piditite Industries Ltd or equivalant) and followed by a overlay protective screed 15mm thick CM(1:3) alongwith liquid water proofing compound approved make on top surfaces of sunken slab after preparation as mentioned above method of application for acrylic cementitious water proofing coating is followed as per manufacturers instructions complete all as specified and directed.

M & L PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sunken filling sub base or leveling course of floor etc complete all as specified.

Demolition of cement concrete unreinforced in ground floor and paving not exceeding 15 cm thick (below or above G.L) all as specified and directed.

M & L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth without using extra cement.

Supply and fixed in repair gun metal globe valves, 20 mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete.

Taking down chowkhats or frames exc 1.5 sqm but n exc 4.0 sqm each without taking off shutter from the frame complete.

S&F factory made 100 % solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company. Door should be water proof, termite proof, fire retardant and having good screw holding capacity complete all as per specification and drawing & as directed by Engineer-in-Charge.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified. Make : ECHON/Sintex/Rajshree/Florista

S & F stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete

S & F stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified

S & F stainless steel handles 125 mm long one piece and fixed with screws/welded to frame complete

Taking down shutter of any description, exc. 1 Sqm but n exc 2.0 Sqm each and removing from site complete all as specified

S & F 35mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified.

Dismantling block board/ boarding of any description complete including iron mongries.

S&F 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed by the Engineer-in-Charge.

S&F 18 mm thick PVC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed by the Engineer-in-Charge.

S&F in repair 6 mm thick looking mirror mounted on wall without frame fixed with CP brackets & necessary screws, of size exc 1.20 Sqm but n exc 4.5 sqm complete all as specified and directed by Engineer-in- Charge.

S&F magnetic catcher and striking plate including letting in and fixed complete.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S & F stainless steel bright finish barrel tower bolts 125 mm long one piece and fixed complete all as specified

S&F of power coated ventilator fixed type and frame made with aluminium section with and including partly glass and partly stainless steel wire mesh and including aluminium grill of aperture not more than 40 sqcm (as specified below), aluminium sections shall be of size as given below including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Frame : 44.5 x 44.5 mm x 1.98 mm thick including 5mm thick frosted in glass fixed with rubber gasket with aluminium beading and stainless steel wire mesh of 0.63 mm nominal dia wire and average width of aperture 1.40 mm complete including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Note :- (i) Making good of wall surface with matching to existing surface complete all as specified and directed by Engineer in Charge. (ii) Cost of glass and gauge shall be included in the quoted rate including taking down old complete all as specified and directed.

Taking Down & refixing the same (light,fan, socket or power) including fiitings and fixtures complete with making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified

S&F in repair stainless steel wire 0.56 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

S&F in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified

M & L for grinding & polishing of existing kota stone, marble, terazzo, mosaic, Udaipur green, etc flooring using mechanical grinder incl necessary patch repairs complete all as specified and directed by Engineer-in-Charge.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified

M&L for Machine cut kota stone as in skirting 15-18 thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:6 complete all as specified

Supply only liquid water proofing compound complete

M & L for demolition of existing PCC, treating of joints, filling of honey combs with using crack fill chemical of Dr Fixit or STP and providing 25 mm thick PCC (1:2:4) type B-0 with WPC (If ordered by Engineer-in-Charge) over roof surface complete all as specified and directed.

M & L for rendering 15 mm thick plastering in cement mortar 1:4 with WPC (If ordered by Engineer-in-Charge), complete all as specified and directed.

M & L for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and directed and as per manufacturer's instructions.

Shree Durgai Construction Co.