CA NO GE(N)AMB-69(P)/2019-20 REPAIR TO JOINERY, PLUMBING WORK, FLOORING AND PERIODICAL SERVICES IN RACE COURSE COLONY, BPH AND OTHER AREAS OF SECTOR B OF GE (NORTH) AMBALA CANT

Amount

M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified include taking down/demolition of existing pipe complete all as specified and as directed by the Engineer-in-Charge.

M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified include taking down/demolition of existing pipe complete all as specified and as directed by the Engineer-in-Charge.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair brass chromium plated mixture hot and cold for wall and wash hand basin screwed down for iron pipe complete all as specified and as directed by the Engineer-in-Charge. (Make:Prayag/Cera/Hindware/Parryware)

S & F in repair Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge. Make:Prayag/Cera/Hindware/Parryware

S&F in repair vitreous China wash basin white, pedestal white in colour ISI marked of size 550 mm x 400 mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brackets 2 Nos embedded in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repair Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe). Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs 10Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets .Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern. Flushing cistern and flushing pipe (exclusive of brackets), complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe).Wash down water closet (Pedestal pattern), complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing plastic water closet seat cover, white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed by the Engineer-in-Charge. (Make:Prayag/Cera/Hindware/Parryware)

Supply and fixing in repairs of 20mm bore Stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by the Engineer-in-Charge. Make - Jainco/GEM/Parko

S&F in repair 15mm dia angular stop valves of chromium plated, with long shank and cup, screwed down high pressure, with CP flanges complete all as specified and as directed by the Engineer-in-Charge. (Make:Prayag/Cera/Hindware/Parryware)

S&F in repair 15mm bore dia bip tap of brass chromium plated fancy type long body screwed down high pressure with CP flange complete all as specified and as directed by the Engineer-in-Charge. (Make:Prayag/Cera/Hindware/Parryware)

S & F in repair 15mm size PVC connections with PTMP nuts of length 450mm complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair for ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Brass chromium plated shower rose 125mm industry arm size complete all as specified and as directed by the Engineer-in-Charge. (Make:Prayag/Cera/Hindware/Parryware)

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge. Make:Prayag/Cera/Hindware/Parryware

S & F in repairs of 15mm bore stop valve, brass screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by the Engineer-in-Charge. Make - Jainco/GEM/Parko

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement as in repair complete all as specified and as directed by the Engineer-in-Charge.

M&L in repair 100mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and as directed by the Engineer-in-Charge.

M & L in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge.

M & L for taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed by the Engineer-in-Charge.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S&F 75mm bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed by the Engineer-in-Charge.

S&F 110mm bore PVC (SWR) bends of any radius, and provided with access door complete all as specified and as directed by the Engineer-in-Charge.

S&F for 110mm bore PVC (SWR) branch piece (double Y) equal or unequal ans with access door, complete all as specified and as directed by the Engineer-in-Charge.

S & F 75mm bore PVC (SWR) vent cowl, complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Jet spray CP with flexible pipe complete all as specified and as directed by the Engineer-in-Charge.

S& F in repair PVC waste pipe 32 mm dia and fixed complete all as specified and as directed by the Engineer-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of any description finished even and smooth without using extra cement including taking down existing plaster complete all as specified and as directed by the Engineer-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of any description finished even and smooth without using extra cement. including taking down existing plaster including taking down existing plaster complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendring 10mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces on ceiling complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distempe rincluding using painting roller & over 1-2 mm thick layer of putty complete to make surface smooth complete in all repaired complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by the Engineer-in-Charge.

Refixing in the same opening chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down plaster from edges of RCC work such as chajjas, facia, RCC shelf, RCC slab projection, ceiling of any type where steel reinforcement is exposed and filling with plaster in cement mortar (1:3) or PCC 1:2:4) after applying cement slurry and making good to existing surfaces complete all as specified and as directed by the Engineer-in-Charge.

M & L for hacking out old broken glass not exc 0.5 sq m (any thickness, size, quality or description) from metal frame including punching or drilling out glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed by the Engineer-in-Charge.

M & L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge.

S & F for 3.0mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair for brass 150 mm ordinary rat tail rod pattern springs including rollers and roller plate etc complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S & F 35mm thick, 2nd class HW, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge.

S&F35 mm thick, 2nd class Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge.

S & F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvalinised wire staples complete all as specified and as directed by the Engineer-in-Charge.

M&L for prepration of new wooden surface and apply two coat of synthetic enamel paint over a coat of pink primer surface of any description , not otherwise described over 10cm width or girth complete all as specified and as directed by the Engineer-in-Charge.

M&L for prepration of old wooden surface and apply two coat of synthetic enamel paint over a coat of pink primer surface of any description , not otherwise described over 10cm width or girth complete all as specified and as directed by the Engineer-in-Charge.

M&L for cement concrete type F2 1:7:12, using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete for sunken portion including demolition of cement concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L for evenly a coat of blown type bitumen at the rate of 1.5 kg per sqm and blinding with clean dry sand@ 0.05 cum per sqm complete all as specified and as directed by the Engineer-in-Charge.

S & F steel window ( box type ) glazed and gauged using ERW hollow 'P' section double frame jointed internally with 25x3mm complete as per TD- 219(c) sheet 1/3 to 3/3 with side hung shutter including butt binges, steel handles and steel peg stay, towel bolt completes with glazing bars dovetailed or welded, complete all as specified and as directed by the Engineer-in-Charge.

S & F for steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed by the Engineer-in-Charge.

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to GDE Fe410-W complete all as specified and as directed by the Engineer-in-Charge.

S&F for mild steel door shutter two leaves with frame of 20 gauges MS sheet (all around) and leaves of 21 gauge MS Sheet ( all as per Godraj Pettern) with three way locking arrangement with brass lock with CP handle with duplicate key including two coats of spray painting over a coat or red oxide primer complete fixed in existing cupboard fixed with necessary nuts bolts including embedded in PCC 1:2:4 (area is opening shell be measured) complete all as specified and as directed by the Engineer-in-Charge.

S & F 1st class hardwood small fittings such as brackets of any type, latch and hinge blocks, shapped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and as directed by the Engineer-in-Charge.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed by the Engineer-in-Charge.

Preparation of new steel any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.

Prepation of old surfaces of steel any description over 10 cm width or girth and applying two coats of synthetic enamel paint primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for running welding in repairs, thickness of metals to be welded exc 6mm but n exc 9mm, complete all as specified and as directed by Engineer-in-chrage.

M&L for preparation of old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old plastered surfaces of wall after removal of existing treatment and applying two coats of oil bound distemper using rolling roller including applying 1-2 mm thick putty to make surface smooth complete in all respect complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old plastered surfaces of wall and applying two coats of cement base paint after over a coat of primer complete after removal of existing treatment complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of old plastered surfaces of wall and applying two coats of apex paint after complete removal of existing treatment complete all as specified and as directed by the Engineer-in-Charge.

S/F in repair hand health faucet complete all as specified and as directed by the Engineer-in-Charge. Make : Cera, plumber, Hindware/Prayag

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge.

M & L for 25mm thick cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate complete all as specified and as directed by the Engineer-in-Charge.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4.and demolition of existing tiles complete in all respect complete all as specified and as directed by the Engineer-in-Charge.

M & L for Glazed Coloured Ceramic tiles in vertical surface exceeding 0.11 sqm but not exceeding 0.18 sqm thick set and joint in neat cement slury and pointed in white or colour cement to match incl 10 mm thick cement plaster in cement mortar 1:4 .and demolition of existing tiles complete all as specified and as directed by the Engineer-in-Charge.

S&F 150mm long aluminium handles cast type anodised complete all as specified and as directed by the Engineer-in-Charge.

S&F150mm aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed by the Engineer-in-Charge.

S&F100mm butt hinge medium weight cold rolled mild steel and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by the Engineer-in-Charge.

M&L for 16 to 18 mm thick MDF board prelaminated MDF board , exterier grade (grade-1) confirming IS 14587, fixed with screws for kitchen cupboard and cabinet ,self for cupboard including hinges , brass handle and all necessary items complete all as specified and as directed by the Engineer-in-Charge. Make-green ply, Century, Asis

S&F in repair Kitchen plate rack of steel 1mm thickness size 900 x 900x 250mm complete all as specified and as directed by the Engineer-in-Charge. Make - Prayag/Neelkanth/Jayana

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge. Make - Prayag/Neelkanth/Jayana

M&L for cleaning of sewage line up to first man holes blockage of WC, EWC,bathroom,floor trap of WHB/kitchen pipe etc complete all as specified and as directed by the Engineer-in-Charge.

Cleaning of sludge from ist manhole complete all as directed & removel of the same at a distance of exc 50 m but nit exc 100 m away from the site complete all as specified and as directed by the Engineer-in-Charge.

Material & Labour for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified including demolition of existing tank and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White.

Material & Labour for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified including demolition of existing tank and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White.

Demolition cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge.

M & L for providing RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, precast cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete with joints to match, except blocks or slabs complete all as specified and as directed by the Engineer-in-Charge.

M & L for brickwork with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified including demolition of existing brickwork and as directed by the Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc tank exc 250 Ltr and N exc 500Ltr and marking "date of Cleaning" with Paint/stencil complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for machine cut kota stone slab 18-22 mm thick (of size not less than (55 cm x 55 cm) laid in flooring and jointed and pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting waste, rubbing and polishing (Granite finish) over and including cement screed bed 20mm thick in cement mortar (1:4) base complete, all as specified and as directed by the Engineer-in-Charge.

Material and labour for machine cut kota stone slab 16-18 mm thick laid on vertical surface and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as in skirting over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surfaces complete, all as specified and as directed by the Engineer-in-Charge.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by the Engineer-in-Charge.

S & F for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of Red colour having tensile strength of 550 Mpa AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge.

S & F for Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of Red colour having tensile strength of 550 Mpa AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge.

Supplying and fixing door seal in wooden shutters including nails etc complete all as specified and as directed by the Engineer-in-Charge.

Swami Enterprises

dhingra builders

M/S SHASTRI BUILDERS AND ENGINEERS

Puneet Sharma