8539/E8

Amount

REPAIR TO CHAIR DINING Removing old unserviceable stiffeners of chair dining and S & F new stiffeners, made out of first class hard wood (Indian Teak) and tightening the chair complete to shape all as specified & shown on drgs No FD-279, 228.

All as per item No 1 above, but side rails with holes to weaving cane for chair Dining

All as per item No 1 above , but back rails and front rails with holes for chair Dining

All as per item No 1 above, but front legs for chair Dining

All as per item No 1 above, but rear legs for chair Dining

All as per item No 1 above, but PVC shoes of best quality

Repair to Chair Easy Removing of the front leg unserviceable/broken wooden members from chair easy and providing and fixing new one made out of first class hard wood (Indian Teak wood) including tightening of seat frame fixing of joints with glue and bamboo pins all as specified & shown on drg No FD-229, 17

All as per item No 7 above but rear leg drg No FD-229, 17

All as per item No 7 above but front/rear/side rails with holes drg No FD-229, 17

All as per item No 7 above but arms drg No FD-229, 17

Taking down the unserviceable PVC shoes and S&F new PVC shoes to bottom of legs all as specified & shown on drgs.drg No FD-229, 17

Charpoy OR Steel Removing of unserviceable/ broken plywood and S&F new ply wood top 12mm thick BWR grade all as specified & shown on drgs No FD-220-R Make - National/ Kit ply/ Novapan/ Archid

Canning of Chair Dinning Removing of old/unserviceable cane from Chair Dining and re-caning with new plastic cane, white, 2mm wide weaving in holes of the frame and alongwith periphery of weaving work with 4mm wide white plastic cane all as specified & shown on drgs No FD-279 Make -Premier/ Shah

All as per item No 13 above but Chair Writing FD-250,280

All as per item No 13 above but Chair Easy FD-229

Table Peg Removing unserviceable /broken top of table peg and S &F new one made of 18/19 mm thick pre-laminated natural teak faced particle board phenol bonded edges finished with teak wooden beeding all as specified and shown on drawing No FD-277, FD-25 .

Removing unserviceable/broken legs of table peg and S & F legs made out of hard first class hard wood (Indian teak), made to shape fixed with glue and screws for table Peg all as specified & shown on drawing No FD-277, FD-25 .

All as per item No 17 above but long rail drawing No FD-277, FD-25 .

All as per item No 17 above but short rail drawing No FD-277, FD-25 .

All as per item No 17 above but bottom rail drawing No FD-277, FD-25 .

Removing unserviceable existing shoes and S&F new PVC shoes of best quality.drawing No FD-277, FD-25 .

Table Centre FD Removing unserviceable/broken top of Table Centre and S&F new one made of 18/19 mm thick pre-laminated natural teak faced particle board phenol bonded edges finished with teak wooden beeding all as specified and shown on drawing No FD-274 . Make:- National/ Kit ply/ Novapan/ Archid

Removing unserviceable/broken legs of table Centre and S & F new legs, made out with firsy class hard wood (Indian teak), made to Shape fixed with glue and steel chromium plated screws all as specified & shown on drawing No FD-274 . .

All as per item No 23 above but long rails drawing No FD-274 . .

All as per item No 23 above but short rail drawing No FD-274 . .

Removing of unserviceable existing shoes and S&F new PVC shoes of best quality. drawing No FD-274 . .

Table dining 6 persons Removing unserviceable/broken top of table and S & F new top made out of 18/19mm thick prelaminated particle board including 4mm thick first class hard wood( teak) edging around of table top all as specified and shown on drawing No FD-30, 239, 273, .

All as per item No 27 above but removing unserviceable/broken legs of table and S&F new legs made out of first class hard wood (Indian Teak), made to shape as per drg, fixed with glue and screws all as specified & shown on drawing No FD-30, 239, 273, .

All as per item No 27 above but long rails drawing No FD-30, 239, 273, .

All as per item No 27 above but short rail drawing No FD-30, 239, 273, .

All as per item No 27 above but TW triangular bracket 75x75x19mm drawing No FD-30, 239, 273, .

Removing of unserviceable existing shoes and S&F new hard rubber ring duly screwed of best quality.drawing No FD-30, 239, 273, .

Table Dressing Gents With Mirror Removing unserviceable/broken mirror and S&F new mirror 4.5/5mm ( as per sample) all as specified & shown on drgs No FD-230, & 31 Make Modi Guard/Atul/Swastik including back/side beading

Remove old unserviceable drawer S/F new drawers all as specified and showing on drgs No FD-230, & 31

All as per item Sl No 34 above but Steel knob of drawers for table dressing Gents drgs No FD-230, & 31

Chair Writing Removing old unserviceable side rail of chair and S&F new side rail with holes made out of first class hard wood (Indian Teak) and tightening the chair all as specified & shown on drgawing No FD-20, 250, 280

All as per item No 36 above but back rails and front rails with holes drgawing No FD-20, 250, 280

All as per item No 36 above but front legs drgawing No FD-20, 250, 280

All as per Item No 36 above but rear legs drgawing No FD-20, 250, 280

All as per item No-36 above but stiffeners drgawing No FD-20, 250, 280

All as per Item No 36 above but arms drgawing No FD-20, 250, 280

Taking down the unserviceable PVC shoes and S&F new PVC shoes to bottom of legs all as specified and shown on drgawing No FD-20, 250, 280.

Charpoy GI Pipe with ply top Removing old/unserviceable ply wood top and provide with new 12mm thick BWR plywood all as specified & shown on drgawing No FD-220 Make : National/Kitply/Novapan/ Archid

Removing unserviceable GI elbow 3 way 32 mm dia from charpoy GI pipe and fixing new one all as specified and shown on drawing No FD-220.

Removing of old broken long rail of charpoy GI pipe and providing new long rail made of GI pipe 32 mm dia medium grade threaded both ends all as specified and shown on drawing No FD-220. Make :- Jindal/Shrikrishna/Surya Prakash/Tata

Removing old broken short rail 32 mm bore GI pipe and replace with short rail obtained by cutting existing long rail obtained from item 45 above treading suitably and fixing all as specified and shown ondrawing No FD-220.

Removing the existing partly broken shrot rail of GI Pipe obtained from item 46 above and converting it into legs by cutting /threading suitably and fixing with existing elbow all as specified and shown on drawing No FD-220.

Bed with ply top Removing of old unserviceable plywood top of hard bed and S/F new plywood 12mm thick commercial BWR grade and fixed with screw all as specified and shown on drg No FD -21, 213, 246 . Make : National/Kitply/Novapan/Archid,

Removing unserviceable head rest of bed ply wood and providing / fixing new head rest all as specified and shown on drawing No FD -21, 213, 246

All as per item Sl No 49 above but foot rest drg No FD -21, 213, 246 .

Removing unserviceable/broken long rail of bed and supply and fix new long rail made out of hard wood (indian teak) made to shape all as specified and shown on drg.

All as per item Sl No 51 above but batten

Removing old broken mild steel bracket and replaced with new bracket made of 25x25x5mm MS angle iron made to shape including applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces all as specified & directed.

Preperation of old surfaces of Bed with plywood Top at furniture & applying one coat of French Polish on wooden surface of any width or girth including scrapping & cleaning all as per drawing & as directed by Engineer- in-Charge at unit line and store yard of GE 871 EWS. Drg No FD-213, 246

All as per item No 54 above but Chair Easy Drg No FD-229, 17

All as per item No 54 above but Chair writing Drg No FD-20, 250, 280

All as per item No 54 above but Chair Dining Drg No FD-228, 279, 16

All as per item No 54 above but Peg Table Drg No FD-277, 25

All as per item No 54 above but Table centre Drg No FD-274

All as per item No 54 above but Table dining for 6 perssons Drg No FD-30, 239, 273,

All as per item No 54 above but Table dressing Gents W/Mirror Drg No 239, 31

All as per item No 54 above but Teapoy Drg No FD-232, 278

All as per item No 54 above but Table writing Drg No FD-249, 275,33

All as per item No 54 above but Table office clerk Drg No DB-4120

All as per item No 54 above but Chair CBA Drg No DB-3974

All as per item No 54 above but Chair dining long back Drg No FD-357

All as per item No 54 above but Sofa set 4 seater Drg No FD-281/258, 373

All as per item No 54 above but Sofa set 5 seater Drg No FD-281/258, 373

All as per item No 54 above but Table bed side Drg No FD- 210, 248,276

All as per item No 54 above butTable office officer wooden Drg No DB-3129

REPAIRS / PAINTING OF ALMIRAH LARGE STEEL M&L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty whereever required and applying one coat of synthetic enamel paint olive green shade of Make - Berger / Asian/ Nerolac/Shalimar inside and out side of almirah large steel with shelves and all as specified and as directed. Drg No FD-1031

all as per item Sl No 71 above but almirah medium stee Drg No FD-1032

M&L for Removing old unserviceable locks from Almirah large/medium steel and S & F new Brass 6 lever lock with duplicate key (2 Nos of key) of best quality of existing size fixed with screw/ welding to shutter of almirah all as specified and directed. Drg No FD-1031,FD-1032

M&L removing old unserviceable lock Assembly from Almirah large/medium steel and supply and fix new lock assembly including 6mm thick bars round with necessary fittings of approved quality all as specified and directed Drg No D-1031,FD-1032.

M&L removing old unserviceable broken handles from Almirah large/medium steel and supply and fix new Godrej pattern handle with necessary fittings of approved quality all as specified and directed Drg No D-1031,FD-1032

M&L removing the existing unserviceable legs from Almirah large/medium steel and supply and fixing the new legs made out of 1mm thick CRCA sheet and fixed with welding/riveting for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint of olive green shade over a coat of red oxide primer all as specified and as directed. Drg No D-1031,FD-1032

M&L removing the existing dented shelves from Almirah large/medium steel and bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including one coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed Drg No D1031, FD-1032

M&L removing the unserviceable shelves from Almirah large/medium steel and supply and fix new shelves made out of 1mm thick CRCA sheet made to shape and size on drawing and fixing with cleats, nuts and bolts all as specified and directed Drg No D1031, FD-1032

M&L removing worn out doors shutter of Almirah steel large/medium and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges all as specified and directed Drg No D1031, FD-1032

M&L removing old broken hinges of Almirah steel large/medium/almirah small steel and S&F new MS hinges of size as shown on drg by fixing duly welded and all as specified and directed Drg No D1031, FD-1032

M&L removing the unserviceable/rusted bottom from Almirah large steel, almirah steel medium, and supply and fix new bottom made out of 1mm thick CRCA sheet made to shape and size on drawing and fixing by welding matching with existing almirah and one coat of synthetic enamel paint over a coat of red oxide primer and all as specified and directed Drg No D1031, FD-1032

TABLE OFFICE CLERK STEEL Removing the drawer shelves of Table Office Clerk and providing new drawer shelves made out with MS sheet 20 gauge and applying two coats of synthetic enamel paint over a coat of red oxide and duly welded all as directe Drg No FD- 84/1004

Removing unserviceable locks of drawers & providing new brass lock with duplicate keys for table office clerk Drg No FD- 84/1004.

Removing the unserviceable table top and providing with new table top of size 1200mmL x 600mm made out of 18mm thick pre-laminated particle board natural teak finish one side fixed with PVC beading all round the table top all as specified & directed Drg No FD- 84/1004

Painting complete to table inner and outer portion by means of spray painting with one coat of synthetic enamel paint of Olive green in shade all as specified & directed Drg No FD- 84/1004

Removing unserviceable legs and S&F of new legs of 25 Sqmm conduit pipe 16/18 Gauge thick including welding/riveting/ painting as per drg for Table office clk steel all as specified & directed Drg No FD- 84/1004

REPAIR TO TABLE DINING ORs Removing worn out wooden top of table and providing with 18 mm thick particle board top of size 1900 x 635 mm covered with 22 gauge superior quality aluminium sheet all as specified & directed Drg No FD-165

M&L for painting to complete frame of table with one coat of synthetic enamel paint olive green in shade by means of spray painting all as specified & directed Drg No FD-165

Taking out unserviceable/worn out legs and S&F new legs of MS conduit pipe 25 Sqmm including jointing with welding all as specified & directed Drg No FD-165

Taking out old broken/unserviceable long rail and S&F new long rail of MS conduit pipe including welding all as specified & directed Drg No FD-165

All as per item No 91 here-in-before but short rail

LOCKER STEEL Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with one coats of synthetic enamel paint olive green / yellow in shade by means of spray painting as per existing pattern all as specified & directed Drg No SKD-562

Scraping the old paint and applying one coat of synthetic enamel paint inner and outer surfaces to locker steel by means of spray painting olive green/yellow in shade all as specified & directed Drg No SKD-562

Removing the existing unserviceable handle and S&F new handle chromium plated 100mm all as specified & directed Drg No SKD-562

Taking down old unserviceable existing 3 way locking device with MS Rod of Locker steel and S&F of new 3 way locking device with MS Rod as per existing shape and size all as specified & directed Drg No SKD-562

Removing the existing worn out side holder and hanging conduit pipe complete of locker steel and S&F of new side holder and hanging conduit pipe as per existing shape and size all as specified & directed Drg No SKD-562

Taking down old unserviceable existing lock of locker steel and S& F new lock 6 lever brass with duplicate Keys all as specified & directed Drg No SKD-562

LOCKER BED SIDE STEEL Removing the existing unserviceable legs & providing & fixing new legs made out of 1mm thick MS black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by means of spray painting as per existing pattern all as specified & directed Drg No FD-1029

Scraping the old paint and applying one coat of synthetic enamel paint inner and outer surfaces to locker steel by means of spray painting olive green shade all as specified & directed Drg No FD-1029

Removing the existing unserviceable Alluminium bow handle 100mm and S&F new Alluminium bow handle 100mm all as specified & directed Drg No FD-1029

Removing the existing worn out side holder with 20mm aluminium conduit pipe of locker bed side steel and S&F new side holder with 20mm alluminium conduit pipe as per existing shape and size all as specified & directed Drg No FD-1029

Taking down old unserviceable existing Hasp & Staple of locker bed side steel and S&F new Hasp & Staple stainless steel as per existing shape and size all as specified & directed Drg No FD-1029.

FORM W/O BACK AND WITH BACK Removing worn out wooden planks of seat of form w/o back and S&F 25 mm thick hard wood planks fixed with nut & bolts as per existing pattern all as specified & directed Drg No FD-77(M)

All as per item Sl No 103 above but back of form with back all as specified & directed Drg No FD-77(M)

M&L painting to complete frame with one coat of synthetic enamel paint by means of spray painting all as specified & directed Drg No FD-77(M)

Removing old unserviceable Hard Rubber shoes and S&F new PVC shoes of best quality.

TABLE STEEL 900X900X760MM Removing the warn out table top and providing new table top of size 900mmx 600mm made out of 18 mm thick pre-laminated particle board natural teak finish one side fixed with PVC beading all round the table top all as specified & directed Drg No FD-1009

M&L for painting to table with one coat of synthetic enamel paint olive greeen in shade by means of spray painting all as specified & directed Drg No FD-1009

REPAIR TO CHAIR VARANDAH M&L for removing broken/unserviceable cane both seat & back from Chair Varandah and Recanning the same with best quality plastic cane 4mm wide and 0.4 mm thick after cleaning throughly all the surfaces of chair including required welding work for broken frame wherever required and redusting where ever required and applying one coat of synthetic enamel paint white in shade and providing suitable hard rubber shoes 4 Nos best quality for each chair and all as specified and as directed. Drg No FD-256/19 Make:-Premier/shah

REPAIR TO CHAIR CB STEEL WITH ARMS: M&L for removing unserviceable seat from chair CB steel with arms and S&F new seat made out of first class hard wood and canned with 2mm wide and 0.4mm thick plastic cane white colour and 4mm wide 0.4mm thick Gola type plastic cane for all round the border including black painting to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and all as specified and as directed Drg No FD-75(m)

All as per item Sl No 110 above but back

M&L for removing unserviceable/broken arms from chair CB steel with arms and S&F new arms made out of first class hard wood and handle shall be black painted and fixed to the chairs CB steel with arms with suitable wooden screws all as specified and as directed.

M&L for removing unserviceable/broken runner of MS flat 500mm longx18mm x3mm to chair CB tubular steel with arms with suitable welding as per drg, and all as specified and directed.

M&L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green shade all as shown on Drg, and all as directed.

Removing of old unserviceable PVC shoes and S&F new PVC shoes at bottom of legs.

REPAIR TO TABLE BED SIDE Taking down old unserviceable sides of table bed side and S&F new sides of pre-laminated particle board 18/19mm thick extrerior grade ISI marked all as specified and directed. Drg No FD-210,276,248 Make-Novapan, Kitply ,national, Archidrg

All as per item Sl No 117 above but shelf Drg No FD-210,276,248

Taking down old unserviceable back of table bed side and S&F new ply wood back of 6mm thick commercial BWR with required size of screws all as specified and directed.Drg No FD-210,276,248 Make-KIT PLY/ARCHID LAM/NOVAPAN/NATIONAL

Removing unserviceable /broken top of Table bed side and S&F new one made of 18/19 mm thick pre-laminated natural teak faced particle board phenol bonded edges finished with teak wood beading all as specified and shown on drawing Drg No.FD-210,276,248

Table 3'X2' Without drawer steel M&L for removing unserviceable/ broken table top and S&F new table top made out of 18mm thick prelaminated particle board exterior Grade ( Natural teak finish) and provided 4mm thick teak wood beading all around the top all as specified and directed.Drg No FD-1007

Table 3'X2' with drawer steel M&L for removing unserviceable/ broken table top and S&F new table top made out of 18mm thick prelaminated particle board exterior Grade ( Natural teak finish) and provided 4mm thick teak wood beading all around the top suitable for following description all as specified and directedDrg No FD-1008

Taking out unserviceable legs of Table 3'x2'(900x600x760mm) without drawer steel and S&F new legs of MS conduit pipe 25 Sqmm including jointing with welding as per specification and directed.Drg No FD-1007

All as per item Sl No122 above but Table 3' x 2' (900 X 600 x 760 mm) with drawer steel Drg No FD-1008

M&L painting complete in table 3x2 with drawer and without drawer with one coat of synthetic enamel paint olive green in shade by means of spray painting all as specified & shown on drg and directed by Engineer-in-charge. Drg No FD-1007/1008

REPAIR TO TABLE OFFICE CLK WOODEN Removing the worn out table top and providing new top made of 18 mm thick pre laminated partical board including teak wood beading all round the table top shape/size all as specified & shown on drg and directed by Engr-in-charge. Drg No DB-4120

Removing unserviceable/broken drawer of table office Clk wooden and S&F drawer with knob made out of hard wood (Indian teak), made to shape fixed with glue and screws for table office clk wooden all as specified & shown on drawings.

REPAIR TO TRESTLE STORE ROOM WDN :- M&L for taking out old unserviceable/broken long rail from Trestle Store room wooden and S&F new long rail made out of 2nd class hard wood of size 2440 X 100 X100mm thick made to shape and all as specified and shown on Drg No FD-86(M) DB-4101 and directed by Engr-in-Charge

M &L for taking out old unserviceable/broken Middle rail from Trestle Store room wooden and S&F new Middle rail made out of 2nd class hard wood of size 1220 X 65 X100mm thick made to shape and all as specified on Drg.FD-86(M) DB-4101 and directed by Engr-in-Charge

M &L for taking out old unserviceable/broken Legs from Trestle Store room wooden and S&F new Legs made out of 2nd class hard wood of size 400 X100 X100mm thick made to shape all as specified and as shown on DrgFD-86(M) DB-410. and directed by Engr-in-Charge

REPAIR TO TEAPOY Taking out old unserviceable broken existing legs of teapoy and new legs of second class hard wood (teak) as per existing size duly planned and finished including tightening of joint all as specified and directed by Engr-in-Charge.Drg No FD-278

All as per srl item 130 here-in-before but long rail/stiffener/side rails. Drg No FD-278

Taking out old unserviceable top and S&F new top of pre-laminated particle board 18/19mm thick exterior grade make NOVAPAN/ORCHID/kit ply/novapan of existing size and 4mm thick teak wood edging all around for Teapoy top all as specified directed by Engr-in-Charge. Drg No FD-278

MEAT SAFE Removing of old unserviceable front shutters with wire gauge/side wire gauge and S&F new front shutters with wire guage/sides of wire gauge. Shutter should be fitted with 25mm long butt hinges.Wire guage shall be of 12mm mesh and of 20 gauge. 75mm hasp and staple should be provided to top of shutter. All wood shall be 1st class teak. Two numbers ball spring catch shall be provided to each shutter and one coat of white paint .all as per shape and size shown on drawing No FD-47

M&L for preparation of old wooden surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply primer where ever required and one coat of synthetic enamel white paint of approved make & quality inside and out side of Meat safe all as specified and as directed by Engr-in-Charge. Drg No FD-47

Removing old unserviceable aluminium hasp and saple and S&F New 75mm long aluminium hasp and staple best quality. Drg No FD-47

Removing old unserviceable aluminium handle and S&F New 100mm long aluminium handle of best quality Drg No FD-47

REPAIR TO STOOL STEEL 2' HIGHT/STOOL STEEL M & L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and one coat of synthetic enamel paint of olive green shade of approved make & quality inside and out side of stool steel all as specified and as directed by Engr-in-Charge.DRG No FD-81

TRESTLE STORE ROOM STEEL M&L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and one coat of aluminium paint over a coats of primer of approved make & quality to be used to trestle store room steel all as specified and as directed by Engr-in-Charge.Drg No FD-86

SOFA SET 4 PERSON Removing old unserviceable foam cushion with tapestry of seat of Sofa set and M&L for providing new foam cushion polyurethen 40 density 100mm thick with kora cloth lining and tapestry cloth all as specified,directed and shown in drgNo FD-281,373

SOFA SET 5 PERSON Removing old unserviceable foam cushion with tapestry of seat of Sofa set and M&L for providing new foam cushion polyruthen 40 density 100mm thick with kora cloth lining and tapestry cloth all as specified,directed and shown in drg FD-281,373

PAINTING TO DOUBLE SLEEPING BUNK : M&L preparation of old steel surfaces with emery paper, cleaning, redusting, making the surface smooth and apply putty where ever required and one coat of synthetic enamel grey paint shade of approved make and quality all as per specification and as directed by Engr-in-chargeDrg No FD-122

Removing of old/unserviceable ply top of double sleeping bunk and provide with new 12mm thick BWR plywood of make : National/Kitply/Novapan/ Archid Drg No FD-122

PAINTING TO RACK STEEL LARGE : M&L preparation of old steel surfaces with emery paper, cleaning, redusting, making the surface smooth and apply putty where ever required and one coat of synthetic enamel grey paint shade of approved make and quality all as per specification and as directed by Engr-in-charge. Drg No FD-1038

REPAIR TO CHAIR REVOLVING WITH ARMS/WITHOUT ARMS STEEL TP : Removing old unserviceable hydroulic mechanism and S&F new hydroulic mechanism of approved quality all directed by engineer in charge.

All as per item No 144 above but removing old unserviceable castor wheel and S&F new castor wheel of approved quality all directed by engineer in charge.

All as per item No 144 above but removing old unserviceable foam and cloth of seat and back and S&F new 32 mm density foam and cloth of various size and shape of chair cloth all as directed Engr-in-charge.

all as per item No 144 above but removing old unserviceable hand rest and S&F new new hand rest as per existing shape and size hand rest should fitted with suitable nut and bolt/welding. All iron surfaces direct to view when placed in position shall be painted with enamel paint using spray machine to match the colour all as directed by Engr-in-charge.

CHAIR WRITING STEEL : Removing old unserviceable foam and cloth of seat and back and S&F new 32 mm density foam and cloth of various size and shape of chair cloth as approved by GE/Engr-in-charge. Drg No FD/E6/MAP/12

All as per item No 148 above but removing old unserviceable hand rest and S&F new hand rest as per existing shape and size hand rest should fitted with suitable nut and boltt/welding. All iron surfaces direct to view when placed in position shall be painted with enamel paint using spray machine to match the colour all as directed by Engr-in-charge.Drg No FD/E6/MAP/12

NAVEEN TRADERS

M/s Kapil Furniture

JAISWAL ENTERPRISES