REPAIR MAINTENANCE OF CERTAIN ROADS AT INA EZHIMALA

Amount

Material and labour for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bages to remove all loose dirt etc. and applying evenly a priming/tack coat with bitumen grade VG-10 at 5 Kg per 10 Sqm over bituminous surfaces using mechanical sprayer complete all as specified and as directed.

Material and labour for bituminous premix Semi-Dense Asphaltic Concrete (SDAC) 40 mm consolidated thickness with 5.5% binder content by weight of total mix using bitumen grade VG-30, mixed in hot mix plant, laid with mechanical paver, rolled and compacted with vibratory roller HD 99 VV or equivalent roller to required camber and gradient complete all as specified and as directed. NOTE: In the event of variation in the mix design in the percentage of binder content on lesser side, the difference in quantity of binder content will be adjusted(Minus) through supply only rates of paving bitumen VG-30 as per Particular specification clause No.8.5.4.2. However, no price adjustment shall be applicable if excess quantity of binder content is used/approved in the execution of work under this item.

Repairs to potholes any depth, not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surface in roads,cutting around edges to at least 25 mm in depth, making good by good by applying tack coat with bituminous primer at 5 Kg per 10 Sqm using paving bitumen grade VG-10, putting premixed bituminous macadam well rammed and sealed with 9.8 kg per 10 sqm bitumen grade VG-30, binded with 0.09 Cum of stone chipping 6.3 mm size and again well rammed (including supply of premixed macadam ,binder and chippings) depth of pot hole exceeding 30mm complete all as specified and as directed.

Material and labour for preparing new bituminous surfaces of road and marking 2.0mm thick painting centre lines, stop lines, dashes, arrows, letters etc. and the like on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 mixed with reflectorising glass beads @ 250gm per Sqm in molten state with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fix in repair cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions and all as directed. Make : Dhruv of Sinor Infrastructure or equivalent of Oscar safety solutions/ 3M /Automate Road CATs Pvt Ltd/GANM(I) IMPEX/PRIMO SAFETY SOLUTIONS/ACE POLYMERS/Dark Eye/ Greenlite / Road star or makes conforming relevant IS/IRC

Supply and fix in repair cat eye solar reflective type of aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm(shank 65mm) of high efficiency mono rystatie solar panel 2.4 v/0.3 watt one NI-ed rechargable battery(1.2V/1600MA) consisting of super bright LED with 10000 to 18000 mcd all as per manufactures instructions. Make : Sinor Infrastructure or equivalent of Oscar safety solutions/ 3M /Automate Road CATs Pvt Ltd/GANM(I) IMPEX/PRIMO SAFETY SOLUTIONS/ACE POLYMERS/Dark Eye/ Greenlite / Road star or makes conforming relevant IS/IRC

Excavation over areas n. exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed.

Removing excavated material(soil) exceeding 1.5Km and not exceeding 5.0Km and depositing where directed complete all as specified and as directed.

Rolling and consolidating formation surface in cutting with 08 to 12 tonne power roller complete all as specified and as directed.

Material and labour for Soling (or sub base) 150 mm (Spread thicknesss) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber with 08 to 12 tonne power roller all as specified and directed.

Material and labour for Water bound macadam (WBM) 150mm thick (compacted thickness) in 2 layers each layer 75 mm thick with coarse aggregates of granite grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated using power roller of 8 to 10 Tonne capacity to required gradient and camber all as specified and as directed.

Preparing Water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bages to remove all loose dirt etc. and applying evenly a priming/tack coat with bitumen grade VG-10 at 10 Kg per 10 Sqm over WBM surface using mechanical sprayer complete all as specified and as directed.

Schedule of Credit (Minus) Rs. 11970.00 NOTE: Bidder shall insert credit amount of Rs. 11970.00 as rate in Green field under Col-5.

M/S V ASSOCIATES

EXCEL ENGINEERING

K P DIVAKARAN

M/s K V Ramachandran

LUCKY ENTERPRISES