REPAIR/REPLACEMENT OF INTERNAL WIRING INCL SUB MAIN WIRING, MCB DBS BLDG. SECURITY LIGHTS AND CONNECTED ITEMS IN POCKET 7 AND 8 UNDER GE ROORKEE

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete,incl fixtures and fittings like swithes, ceiling rose, pendant, regulator, sockets, light fitting (Mirror light,Bulk head, LED Panel 2''x2'', security light,wall fitting, down light, Flood light,post top lantern) etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for the following points:-

One light / ceiling fan / exhaust fan / call bell point controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

-Ditto- all as per item No. 2.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.

-Ditto- all as per item No. 2.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board but just below / above the existing socket points / DBs up to one meter distance in the same vertical plane, with cables 2.5 sq. mm size.

-Ditto- all as per item No 2 above here in before but wiring in existing conduit for the following :-

One light / ceiling fan / exhaust fan / call bell point controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

-Ditto- all as per item No. 5.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.

M&L for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)

2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire)

2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire)

2runs x 10 sqmm(Ph & N) + 1run x 10 sqmm(earth wire)

4runs x 10 sqmm (3Ph & N) + 2run x 10 sqmm(earth wire)

Notes for item No. 1.00 to 7-00:- (i) Quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & capping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing capping may be used in that portion.

Supply and fix in replacement of switch piano flush type 6 Amps, one way, 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of socket 6 Amps, 2-in-1 flush type universal 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of switch piano flush type 16 Amps, one way, 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of socket 16A & 6A, 2-in-1 flush type universal 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of electronic socket type fan regulator rotary type in 5 steps, 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of bell push switch flush type 6 Amps, 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of electric call bell ding dong type, AC, 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of Modular switch 1 way 16A, 1 module 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of Modular fan regulator step type in 5 steps, 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of Modular Bell push 6A 1 module, 240V, 50Hz complete all as specified and directed

Supply and fix in replacement of Modular blank plate 1 module complete all as specified and directed.

Supply and fix in replacement ceiling rose in poly carbonate 3 terminal brass, flush type 6 Amps, 220 volts AC, ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and directed.

Supply and fix in replacement of Lamp holder, angle type with metal ring, PVC/Polycarbonate body type B-22 with back plate, including LED bulb 12 watts complete all as specified and directed.

Supply and fix in replacement of LED batten type body pre-wired with bipin holders,connector block complete with all accessories including 20 Watt (4 feet) retrofit LED tube with Polycorbonate body, full white and connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.

Supply and fix in replacement of old unserviceable LED tube light fitting 20 watts with polycarbonate housing and polycarbonate diffuser with integrated electronic driver with all accessories including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified. Note: Single/double side connection will be as per direction of Eng-in-Charge

Supply and fix in replacement of old unserviceable LED mirror light light fitting Integral slim LED batten Integral 9 / 10 watts of 2 feet long internally prewired complete with all accessories and including connecting up with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified and directed.

Supply and fix in replacement Decorative wall light fitting, made out of polycarbonate suitable for B-22 base LED lamp including 10 watts LED lamp, full white of approved model fixed on wall and making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement of LED bulkhead luminaire in polycarbonate body , with IP65 degree of protection 10 watt including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement of recessed mounted LED panel light 2'x2' size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP/ Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with pvc insulated and pvc sheathed twisted two core wire of suitable size complete all as specified.

Supply and fix in replacement of slim round recessed cum surface mounting LED down light 12 W with aluminium die-cast body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation including taking down existing unserviceable light fitting of any description complete all as specified and directed.

Supply and fix in replacement of ventilating / PVC exhaust fans fancy square type 225/250mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed.

Supply and fix in replacement of LED street/security light fitting 35/36 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.

Supply and fix in replacement of old unserviceable LED Flood light fitting 50 watt capacity with SMD LED pressure die-cast aluminium housing with reflactor including making electrical connection with pvc insulated and pvc sheathed twisted three core wire of suitable size complete all as specified. Note :- The Quoted rate is deemed to be included for installation of light fitting at any height including necessary T & P and safety equipments.

Supply and fix in replacement of old unserviceable LED Post Top Lantern light fitting 30/40 watt capacity with tranparent diffuser and fixing arrangement on new GI Pipe medium grade of dia 40 mm duly grouted on wall/brick pillar with the help of cement mortar including making electrical connection with pvc insulated and pvc sheathed twisted three core wire of size 1.0 sqmm complete all as specified and directed at site.

Supply and fix in replacement of old unserviceable Post Top lantern light fitting of capacity 1x7/8 watts with B-22 base LED bulb, transparent polycarbonate diffuser and fixing arrangement on new GI pipe of 25/40 mm dia medium grade of length 1.5m duly grouted on ground/wall/brick pillar with the help of cement mortar including making electrical connection with pvc insulated and pvc sheathed twisted three core wire of size 0.5 sqmm from junction box to light fitting complete all as specified and directed at site.

Supply and fix in replacement of old unserviceable twin core of flexible wire of size 23/0.0076 with PVC medium grade pipe 20mm dia for connection of post top lantern fitting from one junction box to other junction box complete all as specified and directed at site.

Supply and fix in replacement PVC / DK Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof suitable for outdoor installation for Gate light and Post top lantern, fixed on wall with screw & rawal plug and on GI Pipe wth suitable size MS clamp and Nut-bolts,washer of size 150x100x60 mm complete including one connector block three terminals and PVC cable gland 02 Nos for incoming and outgoing cables with provn of 01 nos single pole MCBs 10-32 amps inside the box including taking out/down existing unserviceable junction box of any description complete all as specified and directed at site. Make : Syntex model No-GSJB 1510 or any equivalent moden in Naptune/Hensel.

Supply and fix in replacement of modular MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified.

Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately.

Supply and fix in replacement of MCB distribution board, TPN, 4 way, 415 V, 3 phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCBs shall be measured and paid separately.

All as per item No. 40 here-in-before but SPN, 8 way, 230 V, 1 phase, AC Note: MCBs shall be measured and paid separately.

All as per item No. 40 here-in-before but SPN, 4 way, 230 V, 1 phase, AC Note: MCBs shall be measured and paid separately.

Supply and fix MCCB 100A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.

Supply and fix in replacement of MCB 100 Amp, 10 KA, TPN, 'B' curve, 415 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed.

Supply and fix in replacement of MCB 63A, 6 KA, SPN, 'B' curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed.

Supply and fix in replacement of MCB 10A/20A/32A, 6 KA, single Pole, 'B' curve, 240 V, 50 Hz including taking down existing unserviceable MCB of any description complete all as specified and directed.

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed,CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 30kg/pit(resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7.The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 40 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including medium grade rigid PVC conduit upto 7 mtr incl cutting and chases on wall and floor complete all as specified and directed.

S&F in replacement of single phase Kwh meter with LCD display, class I, base mounting of rating 10-60 Amps, AC 240 Volt, 50 HZ, with acrylic box including mounting on wooden box of suitable size and making incoming and outgoing electric connection complete all as specified and directed. Make L&T / HPL /Secure Note for item No 47 & 48. The UNSV Kwh meters shall be deposited in E/M store.

S&F in replacement of Three phase Kwh meter with LCD display, class I, base mounting of rating 10-60 Amps, AC 415 Volt, 50 HZ, with acrylic box including mounting on wooden box of suitable size and making incoming and outgoing electric connection complete all as specified and directed. Make L&T / HPL/ Secure

M&L in replacement of unserviceable Bus-bar chamber made out of sheet metal enclosure 100 Amps power coated independent for five connections, aluminium busbar suitable for 100 amps current rating mounted on wall, including connecting all incoming and out going electrical connections complete all as specified and directed .

M & L for Circuit/submain wiring with single core FRLS PVC insulated copper stranded conductor cable drawing into existing PVC rigid conduit surface /concealed/ casing caping as required of 1.5 Sqmm for Inverter wiring, including taking down unserviceable existing wiring etc complete all as specified and directed.

Taking down existing unserviceable service cable of any description and Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated multi-stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed, 25sq. mm nominal cross section, 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

- Ditto - all as per item No 52 but of size 16sqmm 4 core

- Ditto - all as per item No 52 but of size 10sqmm 4 core

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of HDPE Pipe and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for cutting of existing road / hard standing up to 15 cm depth for laying of HDPE pipes and making good the disturbed surfaces by providing PCC 1:2:4 type B-1 (using 20mm graded aggregate) after laying of pipes lines and returning filling of soil, complete all as specified and directed. Note:- Excavation and earth work below road / hard standing will be measured and paid under relevant items.

Supply and fix in replacement of 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor twin core, 16 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections including connecting on LT OH line / energy meter / DB etc complete all as specified and directed.

- Ditto - all as per item No 60 but of size twin core 10 sqmm

- Ditto - all as per item No 60 but of size twin core 6 sqmm

- Ditto - all as per item No 60 but of size twin core 4 sqmm

S&F Exhaust fan Steel body AC single phase 230/240 Volt of size 300 mm sweep complete with louvers including making whole on wall to fix exhaust fan and grouting of nut bolts etc and making good the disturbed sufaces of wall all as specified and directed .

Supply fix and fabricate 18mm thick prelaminated Particle board, interior grade, with screws & hinges to timber/ wood/ welded to angle iron frame for meter box, coloured and patteren as approved including hinge, locking arrangement and stainless steel bright finish handle complete all as specified and directed.

M&L for angle iron work to fix on wall after cutting, chasing and welding and making good by PCC work to fix particle board of any size complete all as specified and directed.

Labour only for attending day to day electric complaints of internal electrification and repairing in situ by skilled electrician along with a helper and rectifying the faulty points/ replacing defective items (Switch, Socket, MCB, Tubelight, holder, capacitor, regulator, bell etc) complete all as specified and directed. Note: (a) The trademan should carry all Tools and safety equipments to carry out complaint. Any accident/mis-happening occur will be the responsibility of contractor. (b) The store used in rectifying the complaint will be measured under 'supply only' items on the same BOQ. (c) Trademen shall report the concern JE at 0900 hrs.

Supply only Retrofit T8 LED tube rod Polycarbonate 4 feet long 20 Watt, single end, 240 volt Single/double side connection as per direction of Eng-in-Charge.

Supply only switch piano flush type polycarbonate single pole one way 5 Amps.

Supply only switch piano flush type polycarbonate single pole one way 15 Amps.

Supply only socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type.

Supply only socket outlet polycarbonate 2 in 1, 3 pin 5/15 Amps flush type.

Supply only bell push flush type 5 Amps.

Supply only Bell electric Ding-ding working on single phase 230 Volts AC Supply.

Supply only Batten Holder, B-22 base, PVC body. Make :- Havells (Reo) / Anchor (Penta PC) /HPL

Supply only Twin Core flexible copper wire 23/0.0076 (90mtr long)

Supply only Electronic Fan regulator, socket type, 5 steps working on single phase 230 Volts AC Supply. Make : Havells (Reo) / Anchor (Penta PC) /HPL

R.D.Builders

anant enterprises

PARADISE INFRA POWER COMPANY

m/s rajesh bros.

NITHYA INFRATECH

SHUBH BUILDERS

TWINKLE ENTERPRISES