UPGRADATION OF CERTAIN SMQ (PH-II) AND CERTAIN MINOR WORKS AT AF STN SAMANA UNDER GE (AF) JAMNAGAR NO 1

Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 km but n.exc 2 Km complete all as spcified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L Rendering 10mm thick in CM 1:4 on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing for skirting/dado etc complete all as spcified and directed

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as spcified and directed

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spcified and directed

M&L for Non skid, coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spcified and directed

M&L for Non skid, ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spcified and directed

M&L Green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window/door cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as spcified and directed

M&L, Machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L, Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spcified and directed

Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spcified and directed

Cutting chases, pinning in, making good to facings on stone concrete, block or slab wall, where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as spcified and directed

S&F 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F 32mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F 15mm size angular Stop valves, cast copper alloy, CP,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spcified and directed

S&F fancy type chromium plated, long shank & cup (concealed type) 15mm bore dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spcified and directed

S&F 15mm dia size Bib taps, CP,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as spcified and directed

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all asspcified and directed

S&F in repair 15 mm bore, swan neck, taps cast copper alloy capaston head CP, screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed complete all as spcified and directed

S&F in repairs two way angle valve brass chromium plated, fancy type complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as spcified and directed

S&F in repair Vitreous Cliina wash basin, angle back, size 400 x 400 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, 32 mm dia brass waste coupling and, waste waste pipe of suitable length complete all as specified and directed by Engineer-in-Charge

S&F brass chromium plated shower rose 100 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed by Engineer-in-Charge

S&F in repairs sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and directed.

S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as spd and directed

S&F in repair Towel Ring of CP fixed with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed by Engineer-in-Charge

S&F Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories, overall size 600mm x 900mm x 250 mm , IN REPAIR, complete all as specified and directed by Engineer-in-Charge

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-Charge

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap incl water closet seat cover of plastic,jet etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge

S&F in repair 10 Litre capacity PVC symphonic action type flushing cistern,(ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and directed

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge

S&F in repair chromium plated grating 100mm size with or w/o waste hole complete all as specified and directed

Dismantling and disconnecting of existing cast iron or reinforced concrete drain pipes, jointed in cement mortar 75/100 mm dia bore fixed to wall,laid in trenches etc complete all as specified and directed Engineer-in-Charge

S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed

S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F 75 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge

S & F 75 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes provided with access door in repair complete all as specified and directed by Engineer-in-Charge

S & F 75 mm bore of pipe PVC (SWR) branch piece, single (single Y) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and directed by Engineer-in-Charge

M&L for 75 mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes provided with access door in reapir complete all as specified and directed by Engineer-in-Charge

S & F 110 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and directed by Engineer-in-Charge

S & F 110 mm bore of pipe PVC vent cowl fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge

Demolition of brick / stone / PCC block masonry / RCC Jalli fixed in cement mortar including all quoins, pillars, arches etc. all as specified and as directed.

M&L for providing precast cement concrete (1:3:6) (using 20mm graded stone aggregate) solid building blocks exc 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.

Demolition of RCC of any descrition such as Kitchen chimniy, chajja, shelves, OHT Tanks,Pilar,wall, column.beam etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

M&L Reinforcement cement concrete type B1 1:2:4 using 20mm aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves, chajja, lintel /Bands and similar wks complete all as specified and directed by Engineer-in-Charge

S & F of Mild steel round bars 10mm dia Fe-410-W (Gde.E-250) Part- I quality-A or Fe 290 (Gde - E-165), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F mild steel TMT bar 6mm to 8mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia or as in stirrups complete all as specified and directed by Engineer-in-Charge

Form work to sofites of suspended slab such as roof slab, floor slab , landing, chajjas, lintel and similar work for rough finish surface.complete all as specified and directed by Engineer-in-Charge

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as spd and directed

M&L for plastering 10mm thick on concrete surface in CM 1:4, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacture instruction complete all as specified and directed Note: WPC will be measured & paid separately.

Supply only integral water proofing chemical @ 200ml/Bag of cement complete all as specified and directed.

Applying coating (02 coats) of Pidifin 2k @ (not less than) 1.54 kg/ Sq.m in two coats on sunken surfaces of toilet & bathroom and similar situation all as recommended by manufacturers complete all as specified and directed by Engineer-in-Charge Note: Make Dr Fixit of pidilite or equivalant in fosroc/STP etc

M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in fdn filling and mass concrete etc complete all as spd and directed

S&F 40mm dia Tubes, 'medium grade', galvanised, with all fitting; laid in wall for suken foor complete all as spd and directed

Taking down cement plaster in cement or cement lime mortar on brick or stone or PCC block walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 km but n.exc 2 Km, complete all as spd and directed

M&L for rendering 15 mm thick on stone masonary/brick / concrete block surface of walls in cement mortar 1:6 complete all as spd and directed

M &L 2 coats of oil bound distemper on new surfaces of walls including preparation to distempering to match with existing work complete all as specified and directed

M&L for 2 coats of wall care putty over plastered/old decorated surface of wall including rubbing with sand paper to prepare the surface even and smooth complete all as spd and directed

M & L rendering 10 mm thick in patches on fair faces of brick or concrete surfaces in CM 1:3 as on ceiling, facia roof projection etc complete all as specified and directed

M &L 2 coats of oil bound distemper on new surfaces of ceiling including preparation to distempering to match with existing work complete all as specified and directed

M&L for 2 coats of wall care putty over plastered/old decorated surface of ceiling ncluding rubbing with sand paper to prepare the surface even and smooth complete all as spd and directed

M&L for Preparation of old distempered / decorated surfaces of walls Washing, rubbing down and stopping of distempered and painted surfaces and applying Two coat of Distemper oil emulsion complete as specified and directed.

M&L for Preparation of old distempered / decorated surfaces of ceiling Washing, rubbing down and stopping of distempered and painted surfaces and applying Two coat of Distemper oil emulsion complete as specified and directed.

S&F in repair aluminium three track Powder coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed by Engineer-in-Charge

S&F aluminium window/ventilators shutters powder coating of any color ( thickness of powder coating not less than 50 micron) fixed type w/o sash bar, aluminium section weighing min. 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etc in repair complete all as specified.directed by Engineer - in - Charge.

S&F sheet glass 3 mm thick ordinary quality(sheet glass is ground or obscured or frosted, on one side) and glazing with oil putty / wooden beads / aluminium glazing clip in square n.exc. 0.5 sqm in each pane complete all as specified & directed.

S&F in repair MS louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti for adjusting the louvers fixed in Aluminium ventilators with screws etc complete all as specified and directed by Engineer-in-Charge

M & L Second class hard wood (hollock) plain fillets of Sectional area exc 6 Sq cm but not exceeding 13 Sq. cm, square, rectangular or triangular in section, wrought, secured with head less nails or brads, complete all as specified

S&F Prelaminated particle board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F 18/19 mm thick, Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work

M & L Second class hard wood (hollock) plain fillets of Sectional area not exceeding 3 Sq. cm, square, rectangular or triangular in section, wrought, secured with head less nails or brads, complete all as specified

S & F Continuous (piano) hinges, mild steel, width of flaps (when open) is 30 mm bright finish or electrogalvanised

S& F for magnetic catcher of plastic body with striking plate etc and fixed complete

S&F 75 mm in size aluminium handles cast type anodized complete all as specified & directed.

S&F Hasp and staple, safety type 100 mm, of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed Engineer-in-Charge

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters of any description (W/out taking off shutters from the frames) and removal from site complete all as specified and directed Engineer-in-Charge

Taking down shutter of any description n exc 1.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and Refixing of shutters in same opening after resecuring or easing & adjusting, complete all as specified and directed by Engineer-in-Charge

M &L Second class hard-wood in scantlings clean sawn timber fixed etc complete all as specified and directed Engineer-in-Charge

S&F 30 mm thick 2nd class HW Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fitted to chowkats complete all as specified and directed by Engineer-in-Charge

S&F 2nd class HW 30mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed Engineer-in-Charge

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.

S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.

S&F 125 mm in size aluminium handles cast type anodized complete all as specified & directed.

S & F 250 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engineer-in-Charge

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed by Engineer-in-Charge

S&F in repair Curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified & directed.

M&L for preparing new surfaces of wood or wood based materials of any description not other wise described over 10 CM width or girth new or previously un treated wooden surfaces and applying one coat of pink primer and two coat of synthetic enamel paint complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165

M&L for preparation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide.

M&L for preparation of old painted wooden surfaces, exc 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.

M&L for PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in fdn filling and mass concrete etc complete.

Excavation in post holes in hard/dense soil (or similar holes) each n.exc 0.5 cum, getting out, returning, refilling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil removing surplus soil to a distance n exc 50 m complete all as specified and directed.

S&F Plates (Plain or chequered) channels,squarecut or notched (ordinary and counter sunk) forming holes, w/o any attachment conforming to FE-410-W( Gde-E-250 )quality -A complete all as specified and directed Engineer-in-Charge

S&F for joist,channel, angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, riveting etc. n.exc 10 kg each brackets conforming to FE-290 Gde-E-165 ) complete all as specified and directed by Engineer-in-Charge

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Rubber moulded chequered cement concrete tile with grey cement and pigment (of approved tint) of size 30 cm x 30 cm x 25 mm thick over , jointed and pointed in neat cement slurry, in repair complete.

Material & Labour Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 20 mm thick sand screed bed, in repair complete.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in fdn filling and mass concrete etc complete.

M&L for 100 mm thick PCC 1:2:4 type B2 using 20 mm graded stone aggregate as in floor / hard standing/Path incl joints etc complete all as specified & directed.

Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing to store complete all as spd and directed

S&F 500 ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed

S&F in repair 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F CPVC ball valves for 32 mm outer dia pipe complete all as specified and directed by Engineer-in-Charge

S&F 200mm, ordinary MS rat tail rod pattern springs including roller and roller plate in repair complete all as specified & directed.

Surface dressing n exc 15 cm deep in Hard/dense soil all as specified and directed

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in subbase of floor / hard standing/Path ,etc complete all as specified & directed.

M&L for 75 mm thick Cement concrete type B- 2, 1:2:4 (20mm graded aggregate) as in floor / hard standing/Path ,etc complete all as specified & directed.

M&L for Forming construction joints 30mm deep x 10mm wide filled with sealing compound Grade B etc complete all as specified and as directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, Posts embedded in Concrete, brick work, masonry, etc including taking out embedded portion and making good disturbed ground

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in fdn filling and mass concrete etc complete.

S & F angle iron / flat iron as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S & F of Mild steel screw bolts (machine made) of neck diameter 10 mm & 40mm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed

Dismantling fencing wire mesh,any type

Supply only chain link fencing, any size or type including line wires, galvanised mild steel to any type of standards, rails, straining bolts etc complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

M&L preparation of new or previously untreated steel and iron surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S& f aluminium powder coating of any color ( thickness of powder coating not less than 50 micron) frame for door,window and ventilators or similar wk with one or more rebate inc joining cleat for fixing complete all as specified and directed by Engineer-in-Charge

S&F aluminium door shutters powder coating of any color ( thickness of powder coating not less than 50 micron), alumimnium section weighing min. 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, handles 2 Nos in each door, hinges/roller, anodised aluminium snap beading, screws etc complete all as specified.directed by Engineer - in - Charge.

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed by Engineer-in-Charge

S&F sheet glass 4 mm thick ordinary quality (plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square exc. 0.5 sqm in each pane complete all as specified & directed.

S&F door closer hydraulically regulated designation No 2, aluminium (Die cast) body, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg fixed complete all as specified & directed.

S&F 100 mm size mild steel body Mortise lock, vertical type, with 4 brass liver fixed to aluminium door complete.

Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, frame and assesories etc.

S&F 600x600mmx4mm thick false ceiling of Non esbestos fibre cement building boards (E Board) and including GI snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm . The GI frame work will be supported on side wall with the use of GI 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified directed by the Engineer-in-Charge.

Taking down carefully any type of point wiring (light / fan / socket or power) along with old conduit/ cassing capping complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors and making good disturbed surfaces to the existing surface complete.

Taking down carefully sub main wiring complete of any type (batten / surface conduit) complete and making good disturbed surfaces complete all as specified and directed.

Taking down Distribution boxes /AC boxesany type with all its related accessories as directed by Engineer-In-Charge.

Taking down old MCB any type,size with all its related accessories as directed by Engineer-In-Charge.

Taking down and refixing Distribution boxes/ tube light/MCBsize capacity with all its related accessories as directed by Engineer-In-Charge.

M & L for point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including super deluxe casing caping (not less than 25 mm wide) with all its accessories like bends, tees, suitable module PVC boxes o etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire and plastic laminated PVC box with cover plate as specified and directed by Engr -in charge:

a) One light / fan / exhaust fan point controlled by one, one way switch.

b) One light point controlled by two, two way switch

c) One 3 pin socket out let 5 Amps on same board with other switches.

d) One 3 pin socket out let 5 Amps on the independent board.

e) One bell point control by one push button on the same board with other switches or independent with cable 1.5 Sqmm size

-Ditto- all as per item No 150 about but with 2.5.0 sqmm multistranded copper multistranded conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board as specified and directed by Engr -in charge:

-Ditto- all as per item No 150 about but with 4.0 sqmm multistranded copper multistranded conductor FRLS cable with 4.0 sqmm earth wire for SPN enclosure AC box on independent board as specified and directed by Engr -in charge:

S & F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts complete as specified and directed by Engr -in charge:. Make - Leader/Anchor/SSK as approved.

S & F switch Piano 5 Amps, flush button type, SP, two way, 230 Volts comnplete as specified and directed by Engr -in charge:. Make - Leader/Anchor/SSK as approved.

S & F switch bell push 5 Amps, flush button type, SP, one way, 230 Volts complete as specified and directed by Engr -in charge: Make - Leader/Anchor/SSK as approved

S & F Switch socket combination multipurpose 5 pin 5 Amps, flush type, 230 / 250 Volts complete as specified and directed by Engr -in charge:. Make -Leader/Anchor/SSK

S & F switch socket combination ,6 pin ,15 amps, flush type, multipurpose, 230 / 250 volts complete as specified and directed by Engr -in charge:. Make - Leader/Anchor/SSK as approved.

S & F bell Ding Dong type AC 230 Volts, complete all as specified and directed by Engr -in charge

M&L for Ceiling rose, 3 terminal polycarbonate body 6 Amps, 250 volts AC, including connecting complete as specified and directed by Engr -in charge:.

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6.0 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including casing and caping complete with all accessories alongwith provn of 6.0 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to tbe BD with proper size of lugs/thimbles etc comnplete all as specified and directed by Engr -in charge

Supply and fix sheet metal enclosure MCB DB, single pole and neutral, 8 ways double door 240 volts having 200 Amps rated bus bar with balnking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connectionsas directed by engineer in charge

Supply and fix sheet metal enclosure MCB DB, triple pole and neutral, 4 ways double door 415 volts having 200 Amps double door rated bus bar with blanking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connectionsas directed by engineer in charge

Supply and fix MCB single pole 240 volts 6 to 32 Amps (to be fixed as per load requirement) 220V with 'C' curve complete as including all connectionsas directed by engineer in charge

Supply and fix MCB Single pole Neutral 240 volts 40- 63 Amps (to be fixed as per load requirement)220V with 'C' curve complete as including all connectionsas directed by engineer in charge

Supply and fix MCB’s triple pole & neutral, 63 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix SPN enclosure with two pin and earth and socketcomplete with single mcb 20 amp with ‘C’ curve, fixed in sheet metal board complete including connecting.

Note for MCB DBs & MCBs :- (i) MCBs shall be of 10KA breaking capacity as per IS 8828 of 1996 with 'C' characteristics. (ii) MCBs & MCB DBs shall be of the same make. (iii) Wiring cables shall be connected to MCBs with suitable lugs of copper materials.

Taking down Ceilling fan/exhaust fan with cover plate , sealing cable end, dismantling blades and removing fan and blad for painting of ceiling fan/Exhaust fan complete with synthetic enamel paint black/ white by spraying including filling of cavities with filler, one coat after cleaning all rust and dust etc complete and refixing the same with 0.5 sqmm , flexible ,three core wire, copper conductor cable all as directed by Engineer-In-Charge. all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type, 230 V, including connecting complete.

Supply & Fix energy efficient LED tube light fitting with built in LED & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

S&F energy efficient LED tube light fitting with built in LED & integral LED driver 8 to 10 watt, channel housing & diffuser of length 600 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

S&F energy efficient LED tube light fitting with built in LED & integral LED driver 5 watt, channel housing & diffuser of length with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

S & F in plastic body exhaust fan size 200 mm sweep, single phase, 1200 RPM, ISI marked, including louvers , with connection from ceilling rose with 0.5 Sqmm flexible three core wire complete in walll/window including making hole in surface and re surfacing it as per direction of engineer in charge

S&F LED building security light fitting 35 Watt, system efficiency not less than 100 lumen / Watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, pipe, bracket on building,

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 2.5.0 sqmm with multi stranded copper conductor , FRLS type cable drawn through and includingPVC conduit complete with all accessories alongwith provn of 2.5.0 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to tbe BD with proper size of lugs/thimbles etc comnplete all as specified and directed.

Material and labour replacement for earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel wire 4 mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade, and 15 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion.

Taking down and refixing False celing light, tubelight any size capacity with all its related accessories as directed by Engineer-In-Charge.

Supply and fix Energy efficient recessed mounted LED luminaries 36 watt suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver all as specified and directed by Engg-in-charge .

Supply, Installation & testing of 02 TR capacity 5 Star rating split type AC Unit with Inverter base Technology complete with indoor & outdoor unit, with copper tubing, electric driven 240 volt, single phase, charged with Eco Friendly non CFC Refrigerant with Antibacterial / Dust Filter and all connected accessories and copper tubing from indoor to outdoor unit with rubber insulation, MS stand / bracket of suitable size witstand and for fixing outdoor unit on wall, copper wiring PVC insulated 3 core from indoor to outdoor unit, PVC drain pipe from indoor unit to outside of wall up to plinth protection of building complete including making hole in wall and make finished the surface as per manufacture instruction & as directed .

Material & Labour in repair for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete. Note: 2 Runs of main cable and one run earth wire with capping & casing will be measured as one RM for payment.

Supply and fix in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 32 amps.

Please Enable Macros to View BoQ information