AUGMENTATION OF WS SCHEME BY CONSTRUCTUING BOOSTING STATIONS, RENOVATION OF EXISTING STRUCTURES OF WATER WORKS, PROVIDING HOUSEHOLD TAP CONNECTIONS AND LAING THE BALANCE PIPE LINES IN VILLAGE DISTRICT SONIPAT

Amount

WATER TREATMENT PLANT (WTP) Design, construction, testing & commissioning of 0.50 MLD capacity Water treatment plant including inlet channel, Alum dozing, Flash mixing, Clarifloculator, filter box, over head Reservoir for back wash, waste water tank including all civil work, pumping machineries and electric cabling, control panels, entire piping network of suitable size laying the DI pipe from raw water pump to inlet box of WTP, WTP to CWT & Suction Well for CW including DI specials, suitable size Sluice valves, Hodies, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed complete in all respects as per NIT (Sluice valves of make IVC/VAG) .

RAW WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame-2.1 -RAW WATER WORKS- 800 LPM X 35 M. Head

2.2 WATER WORKS - 2.1.1- 500 LPM X 12.50 M. Head

CLEAR WATER PUMPING MACHINERY-Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame- WATER WORKS - 3.1.1- 1000 LPM X 30 M. Head

B/STN No. 1 - 600 LPM X 45 M. Head

B/STN No. 2 - 500 LPM X 45 M. Head

PANEL BOARDS FOR MOTORS Supply, erection, testing & commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having follwing items -(4.1)-For 2 no Pumping Sets of 800 LPM x 35 m Head a) Main switch 63 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 3 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 800 LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 3 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 2.1.1

(4.2)-For 2 no Pumping Sets of 500 LPM x 12.5 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 500 LPM x 12.5 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 2.2.1

(4.3)-For 2 no Pumping Sets of 1000 LPM x 30 m Head a) Main switch 63 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 1000 LPM x 30 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.1.1

(4.4)-For 2 no Pumping Sets of 600 LPM x 45 m Head a) Main switch 63 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 600 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.2.1

(4.5)-For 2 no Pumping Sets of 500 LPM x 45 m Head a) Main switch 63 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 500 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 3.3.1

Sluice Valves / NRV & specials for Pumping Machinery- Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 including cost of jointing material complete in all respect. (IVC / VAG make, Kirloskar)- 100mm i/d

Supplying,fixing, testing & commissioning of DI swing check type reflux valve (non returned valve) PN 1.6 including cost of jointing material complete in all respect.( IVC / VAG , Kirloskar make) - 100mm i/d

Supply, fixing & testing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect.- 100mm i/d

Supply, erection, fixing & testing of DI Double flanged pipe complete with all jointing materials- 100mm i/d

Sluice Valves/ Specials For Rising Mains & W/W - Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make)- 100 mm i/d

Supply & Fixing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect.- 100 mm i/d

Supply, erection, testing & commissioning of IS marked copper wire for various motors with underground system in PVC and flexible pipes copper wire 3 core complete in all respevts with accessories like thimble etc.- 10mm 2 core

25mm2 3 Core

Providing and fixing of insulated Rubber matting suitable for HKV installation 1 meter x 2 meter x 12 mm as per specification.

Providing & fixing suitable size floating along with swivel bend as per required specifications approved by Engineer-in-Charge

Supply erection testing of reputed make LED light 100 wats with fittings and accessories complete in all repects. (4 at WW + 2 at 5 B/Stnno. 1 + 2 Bstn no. 2)

Providing & fixing of D.I. Kinetic Air Valve soft seated as confirming to I.S.I. complete in all respect.- 80mm

Supply erection, testing & commissioning of light fittings including complete wiring alon with all material upto 10 points including switch, button, plug, PVC conduict pipe & copper wire etc. as per approved specifications. ( 2 no. pump chambers of Boosting Stations)

Supply erection testing and commissioning of Flow Meter (KRONE Make) with digital display of 150 mm i/d complete in all respect.

Design, Supply & Erection of copper wound outdoor type Transformers of required KVA as mentioned below on load tap changer of suitable capacity on higher side of standard make outdoor type, VCB Panel, G.O. Switch, H.T. Metering Panels, APFC Panels for Transformer, 11KV Substation, entire cable network from G.O. Switch to H.T. Metering equipment and from H.T. Metering to Transformer Main to L.T. Panel, Earthing, safety equipment and any other contingent thereto complete in all respect as per DNIT and getting it passed from Chief Electrical Officer including operation & Maintenance of 5 Years..- At W/W = 63 KVA

Design, providing and construction of steel fabricated Truss Bridge of 1.00 mtr. carriageway of 1.50 M clear height, for carrying 200 & 150 mm i/d DI water supply transmission main for crossing the Delhi branch canal on the way of raw water rising main including structural steel work in angles tees and flats, welded including cutting fixing all gusset plates, bolts, nuts, welding rod, etc, with hoisting and erecting in position with the help of crane as composite section in single piece of 30 m span including providing, fixing, cutting and welding of 5 mm thick chequired plates and painting 2 coats of shalpoxy CTC (LB) type coaltar epoxy to protect steel structure to the entire satisfaction of Engineer-In-Charge complete in all respects. Providing under reamed cast in situ piles using controlled concrete grade M-20 designed mix, 4.5 m deep including boring and getting out the soil and disposal upto a lead of 100m including cost of steel reinforcement, jointing the ties with main bars complete in all respect. (400 mm dia piles)

Providing & fixing in position GI elbow ISI marked complete in all respect 15 mm i/d 675 x 4 = 2,700

Providing & fixing in position GI Nipple ISI marked complete in all respect 15mm x150mm /100 mm 675 x 2 = 1,350

Operation & Maintenance - Operation & maintenance for the complete scope of work mentioned in the DNIT (Disinfection material will be supplied by the PHED) as per schedule-IV during Defect liability period of 12 months after trial run period of 3 months & 5 years thereafter. (Will be charged to A/mtc estimate)." - (i) Defect liability period (Operation Only)

(ii) Operation & maintenance during 1st year

(iii) Operation and maintenance during 2nd year

(iv) Operation and maintenance during 3rd year

(v) Operation and maintenance during 4th year

(vi) Operation and maintenance during 5th year

Bidder Name

Amount

Sunil Kumar(GSTN-06BMGPK6616K1ZU)

RAVI PARKASH CONTRACTOR(GSTN-06AJMPP2964K1ZN)

NAFE SINGH CONTRACTOR(GSTN-NA)

ROHTASH KUMAR CONTRACTOR(GSTN-NA)

Sunil Kumar Bansal(GSTN-NA)

ROHTASH KUMAR CONTRACTOR

Sunil Kumar Bansal

NAFE SINGH CONTRACTOR

RAVI PARKASH CONTRACTOR

Sunil Kumar

RAVI PARKASH CONTRACTOR

NAFE SINGH CONTRACTOR

ROHTASH KUMAR CONTRACTOR