SPECIAL REPAIRS TO WASHROOMS OF BUILDING NO. P 95 LEHER UNDER GE NB VISAKHAPATNAM

Amount

SCHEDULE 'A' PART-I [B/R Works]: M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick light shade (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:6 including dismantling existing tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. Notes: [a] The colour/ shade/ design of tiles shall be as approved by GE. [b] The tile joint shall be kept as 3mm using tile spacers and masking tape shall be provided before applying of the epoxy grout and the surplus grout materials shall be thoroughly cleaned immediately.

M & L for coloured Glazed ceramic tiles of size 450x350x7-8mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shade of tiles laid over and including 10mm thick backing coat in CM 1:4 including dismantling existing tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in Cement Mortar 1:6 including dismantling old stone slabs of any description removing debris off the premises complete all as specified and directed.. [Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded.]

M & L for 25mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded stone aggregate as in sub base of floors complete all as specified and as directed.

M & L for 75mm thick, PCC 1:3:6, type C-2, using 40mm graded stone aggregate as in sub base of floors finishing the surfaces even and fair complete all as specified and directed.

Demolition of Unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish off the primises complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed.

S & F factory made single rebated Wood Polymer Composite [WPC] solid door/ window / ceosetory windows & other Frames/ Chowkhats of size 65mm x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms), fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of termite / borer proof, water/ moisture proof and fire retardant, fixed in position complete all as specied and as directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge.

S & F Stainless steel Butt hinges, 125mm size medium weight complete all as specified and directed.

S & F Stainless steel handles, 150mm size polished bright complete all as specified and directed.

S & F Stainless steel Tower Bolt of size 200 mm size of extruded section complete all as specified and as directed.

S & F floor door stopper of stainless steel body, tongue anodised with hand drawn steel spring fixed in flooroverall length of cover plate 150mm complete all as specified and as directed.

S & F 18mm thick Plywood, grade BWR, type BB, fixed with fevicol and nails fixed to timber frame work as in partitions / shutters / cup boards / wall panelling including taking down old plywood complete all as specified

S & F Stainless steel Butt hinges, 75mm size medium weight complete all as specified and directed.

S & F Magnetic catch, superior quality, PVC body 25 to 40mm size for cup board shutters complete all as directed

S & F Stainless steel designer handles 200mm long complete all as directed

S & F 0.9mm thick decorative laminate type-1 of surface finish, colour and pattern as approved fixed with approved adhesive complete all as directed

M & L for application of high build polymer modified cement mortar 1:2.5 mixed with 3 litres of Notoband SBR of M/s Fosroc chemicals or its equivalent per bag of cement in super structure work in two layers to form 10 to 20mm thick even surface over a coat of bonding agent by mixing Nitobond SBR of M/s Fosroc chemicals or its equivalent @ 1 Ltrs + 1 Litre water + 3 Kg of cement as per manufacturers instructions complete all as directed by the Engineer-in-Charge

M & L for Precast reinforced cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in cast in lintels upto 1.5m clear span, copings, cills, steps, parapets and railings upto 60cm height and similar work including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work including demolition old cement concrete complete all as specified and directed.

M & L for mild steel TMT bars 6 to 8mm dia, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces duly mixed with and including water proofing compound as per manufacturers instructions, finished even and smooth with out using extra cement complete all as directed

M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as directed.

M & L for rendering 5mm thick in CM 1:3 on fair faces of ceiling surfaces, finished even and smooth with out using extra cement complete all as directed.

M & L for preparation of newly plastered surfaces of walls/ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as directed

M & L for preparation of old decorated surfaces of ceiling by brooming down scrapping down smoke and efflorescent, etc and applying one coat of Acrylic Washable Distemper complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of ceiling by using vaccume based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on wall surfaces complete all as specified and as directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, fixed partitions with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F 5.5mm thick sheet glass, ordinary quality glazing with oil putty and glazing clips fixed to wooden / metal frame in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removing debris outside MD land as directed Engineer-in-Charge

M & L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation, sunken floor filling and mass concrete complete all as specified.

M & L for preparation of the sunken floor surfaces by mechanical abrading to remove all loose mortar and laitance, oil, greese, etc and washing with plenty of water making the surface sound and free from cracks by cutting 'V' grooves cut along the cracks and filling with SMARTCARE repair mortar, carryout initial pond test for 24 hours to identify any invisible cracks, injection grouting for cracks on negative side of the surface using shrink compensating grout adhesive SMARTCARE injection Grout Additive @ 250 gms/50 Kg bag of cement with neat cement slurry by drilling the hole of 12mm dia and fixing the nozzle using fast setting compound SMARTCARE instant Leak stop along the construction joints, cracks etc at a distance not more than 500mm angle fillet, providing a cement sand mortar based fillet of 50x50mm admixed with APL Smart care multi purpose polymer @ 0.25 Lit per bag of cement all around in the side at the floor and wall junction and curing by water as per standard practice, supply and applying two component elestomeric acrylic polymer modified cementetious water proofing coating, Smart Care Damp block 2K Suprema or equivalent as approved having 100% elongation as per ASTM D 412 resisting 5 bars positive hydrostatic pressure and 4 bars negative hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202 crack bridging upto 12mm as per ASTM 4548.5. The mixing ration of the coating shall be 2 parts of powder and 01 part of liquid without any water addition in the mixing complete all as per the manufacturer's instructions at a consumption factor of 1.5 Kg/Sqm in two coats complete all as directed by the Engineer-in-Charge

M & L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work of concrete surfaces mixed with and including admixture SMARTCARE Vitalia @ 100 ml per bag of cement finished the surface rough complete all as directed

M & L for treatment around the pipes passing through the walls (Core cut area) by wrapping around all the pipes with APL Smart Care adhere to the surfaces with APL Smart Care Acrylic Bonding Agent and placed appropriately to be grouted around the cut bores, Grouting the gaps between the pipe and the core cutting by a edual shrinkage compensated cementitious grou APL Smart Care General purpose grout that shall be poured into the gaps after fixing in place for effective leak-free shuttering complete all as per manufacturer's instructions complete all as specified and directed and by the Engineer-in-Charge.

S & F in repairs Stainless steel Towel Ring square with round flange complete all as directed. [Make shall be Jaquar of Cat No. ACN-1121N or its equivalent]

S & F in repairs 15mm bore, Hand shower (Health faucet) (ABS Body) with 8mm dia, 1.2m long Spirochrome flex & wall Hook complete all as directed. [Make shall be Jaquar of Cat No. ALD-587 or its equivalent]

S & F in repairs 15mm bore fancy type Chromium plated two way bib taps, screwed down for iron pipe or for brass ferrule with flanges complete all as specified and directed. [Make shall be Jaquar of Cat Part No. FLR-5041PM or its equivalent]

S & F in repairs Stainless steel grating with doom 100mm dia without hole complete all as specified and directed

S & F in repairs Stainless steel grating with doom 100mm dia with waste hole (to insert waste pipe from WHB / Sink, etc) complete all as specified and directed

S & F in repairs Paper holder with flap Recessed Type (Stainless steel) fixed to wall with brass screws complete all as specified and directed. [Make shall be Jaquar of Cat Part No. AHS-1553 or its equivalent]

S & F Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as directed. [Make shall be JAQUAR of Cat No. FLR 5005NB or its equivalent]

S & F in repairs 15mm bore, angular stop cock with wall flange, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. [Make shall be Jaquar of Cat Part No. KUP-35053PM or its equivalent]

S & F in repairs 15mm brass CP wall mixer 2 in 1 system with provision for overhead shower complete with 115mm long bend pipe on upper side, connecting legs & wall flange complete all as specified and directed. [Make shall be Jaquar of Cat Part No. SOL-CHR-6273UPR or its equivalent]

S & F in repairs Shower Arm complete all as specified and directed. [Make shall be Jaquar of Cat Part No. SHA-CHR-479L300S or its equivalent]

S & F in repairs Shower 105mm single flow complete all as specified and directed. [Make shall be Jaquar of Cat Part No. OHS-CHR-1709 or its equivalent]

S & F in repairs Chromium plated Towel rail, 60cm long between flanges complete all as directed. [Make shall be Jaquar of Cat No. ACN-CHR-1111SM or its equivalent]

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as directed. [Make shall be Jaquar of Cat No. ACN-CHR-1173 or its equivalent]

S & F in repairs 15mm bore fancy type Chromium plated bib tap, capstan head, screwed down, screwed for 15mm dia bore iron pipe complete all as specified and directed. [Make shall be Jaquar of Cat Part No. ACN-CHR-5041N or its equivalent]

S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern] of size 560x440x395mm or nearest size, White, including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap including low level PVC flushing cistern 10 lit capacity complete all as specified and as directed.

S & F in repairs Vitreous china wash hand basin, white, table top of size 495x365x150mm including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings complete all as directed. [Make shall be Jaquar of Cat Part No. JDS-WHT-25909 or its equivalent]

S & F in repairs PVC waste pipe of 32mm bore and 800mm long to WHB complete all as specified and directed

S & F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed.

S & F in repairs PVC (SWR) floor trap of 75mm dia outlet with grating including jointing with solvent cement of outlet complete all as directed

S & F in repairs PVC (SWR) Multi floor trap of 75mm dia outlet with grating including jointing with solvent cement of outlet complete all as directed

S & F CPVC Pipes 20 mm outer diameter & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, including taking down of existing unserviceable existing pipes complete all as specified and as directed.

S & F CPVC Pipes 32 mm outer diameter & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, including taking down of existing unserviceable existing pipes complete all as specified and as directed.

S & F CPVC Pipes 50 mm outer diameter & Plain CPVC SDR 11 Fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing, including taking down of existing unserviceable existing pipes complete all as specified and as directed.

S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 20 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.

S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 32 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.

S & F in repairs Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 50 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed.

S & F 110mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, fixed to walls in any position with necessary brackets, clamps, bolts, nuts, etc., including taking down old eaves gutters and rain water pripes complete all as specified and as directed.

S & F 110mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, laid in trenches or in floors including taking down old eaves gutters and rain water pripes complete all as specified and as directed.

S & F 75mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, fixed to walls in any position with necessary brackets, clamps, bolts, nuts, etc., including taking down old eaves gutters and rain water pripes complete all as specified and as directed.

S & F 75mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring/ solvent cement joints, laid in trenches or in floors including taking down old eaves gutters and rain water pripes complete all as specified and as directed.

S & F 110 mm bore UPVC [SWR] bends, any radius including jointing with solvent cement complete all as specified and as directed.

S & F 110 mm bore UPVC [SWR] bends, any radius with access door including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore UPVC [SWR] bends, any radius including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore UPVC [SWR] bends, any radius with access door including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore UPVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S & F 110 mm bore UPVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore UPVC [SWR] Junction Single [Single "T"] equal or unequal complete all as specified and as directed.

S & F 110 mm bore UPVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed.

S & F 125/110mm bore PVC [SWR] Gully Trap with grating including jointing with solvent cement complete all as specified and as directed.

M & L for brick work in half brick thick walls using Fly Ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4 including 2 Nos of 8mm dia bars at every fourth course of brick work including demolition of old brick work complete all as specified and directed.

M & L for removing vegetation / plants grown on the surfaces of building with roots of any height and girth by chipping walls/beams/junctions of vertical stacks / water supply lines or at any other location, applying chemical treatment to prevent further growth and making good the disturbed surfaces in CM 1:3 or PCC 1:2:4 and rendering as required and finishing the surfaces to match with adjoining surfaces complete all as directed

M & L for preparing newly plastered wall surfaces by using vaccume based sanding machine and applying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer over suitable thickness of Cement based Wall Care Putty by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed. (Note: The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicators before commencement of the work to GE for approval.

M & L for preparation of old decorated surfaces of ceiling by brooming down scrapping down smoke and efflorescent, etc and applying one coat of white washr complete all as specified and as directed.

M & L for preparation of old decorated surfaces of walls by brooming down scrapping down smoke and efflorescent, etc and applying one coat of white washr complete all as specified and as directed.

S & F in repairs Seamless False Ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including fixing 12mm thick gypsum board fixed with screws as per manufacturers instructions including applying two coats of plastic emulsion paint over a coat of primer over suitable thickness of wall care putty on exposed ceiling board including dismantling old ceiling board with frame work complete all as specified and directed

S & F designer cornices moulding suitable for seamless ceiling board not less than 75mm wide or as per the manufacture's instructions complete all as specified and as directed.

SCHEDULE 'A' PART-II [E/M Works]: M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area) 1100V grade drawn through and including PVC conduit of size 20mm dia medium grade including accessories fixed on wall/floor/roof, etc including provision of flush type metal GI boxes with modular cover plates, provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan point / Bell point controlled by one, one way switch including taking down old point wiring with fixtures and fittings complete all as specified and directed. [Note: Quoted rate is deemed to be inclusive for cutting through wall, chasing, pinning in making good to the disturbed surfaces whrever required]

S & F modular switch single pole, 1 way, 6 Amps, 1 module

S & F ceiling rose, 3 terminals, PVC/ polycarbonate, isolated body complete all as specified and directed

S & F modular switch single pole, 1 way, 16 Amps, 1 module

S & F modular socket outlet, 6 Amps, 2/3 pin combined 2 module

S & F modular socket outlet, 6/16 Amps, 2/3 pin combined 2 module

M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 2.5 Sqmm, drawn through and including 20mm dia PVC conduit and conduit accessories including provision of 1 run of 2.5 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified and directed. [NOTE: 3 runs of 2.5 Sqmm copper wire and 1 run of PVC conduit shall be measured as one unit length.]

S & F in repairs SRCD protected socket, steel enclosure with two pin and earth plug and socket with 20 amps MCB SP complete all as specified and as directed. Make :-Havells cat part No. DHDDCDP025202003 or its equivalent.

S & F in repairs MCB DB, SPN, 12 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall complete all as specified and as directed.

S & F in repairs MCB, SPN, 6-32 Amps, 240 Volts, 10 KA, C series

S & F in repairs MCB, SP 6 to 32 Amps, 240 Volts, 10 KA, C series

Taking down existing Ceiling Fan of any description and capacity from its original position and refixing the same in position after repairs to buildings after carrying out necessary servicing, cleaning, greasing including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of suitable size, replacement of minor spares such as capacitor, canopy, cotter pin, rubber bushes, nuts & bolts, washers and spray painting with one coat of synthetic enamel paint of approved colour duly filling the cavities with filler complete all as specified and as directed.

Supply and fixing LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old fittings of any type and making good disturbed surfaces to match with existing complete all as directed

S & F Energy efficient Sleek decorative LED Mirror Light Fitting of 10 Watts, 2 feet long Surface & Wall mounted with Acrylic / PMMA diffuser for soft glare free light with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and making good the disturbed surfaces to match with existing complete all as specified and as directed.

Supply and Laying LT XLPE insulated, PVC sheathed, bedded, galvanised steel strip or wire armoured, heavy duty, electric power cables of size 3 core 4 Sqmm, 1100 volts grade, with aluminium conductor laid in trenches / passing through pipe / duct / road crossing / fixed on poles / walls and connecting up with suitable glands, lugs, nuts and bolts and testing on completion including taking out old unserviceable cable complete all as specified and directed by the Engineer-in-Charge.

S & F in repairs MCB, 3 Pole, 25 Amps, 415 Volts, 10 KA, C series

S R CONSTRUCTIONS (BID ID -3493060)

K & K CONSTRUCTIONS (BID ID -3493088)

M B CONSTRUCTIONS (BID ID -3493097)

RAJASHEKHAR ENTERPRISES (BID ID -3493259)

JAYAM BUILD CONSTRUCTIONS (BID ID -3498980)

SUPREET CONSTRUCTIONS (BID ID -3492211)

ALLURI CONSTRUCTIONS (BID ID -3493092)