Construction of Rajiv Gandhi Govt. Engineering College Kangra at Nagrota Bagwan in District Kangra (HP) (SH-Balance work of aluminium work for Library and computer centre)

Amount

Providing and fixing anodised /colour coated aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections as approved Hindal Co., Jindal Indian Aluminum Co. approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screwsupto any floor level/height all complete for doors windows and ventilatiors and glazed partitions frames as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anodised /colour coated aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections as approved make Hindal Co., Jindal Aluminum Co. conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera . Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screwsupto any floor level/height all complete for shutters of doors windows and ventilatiors including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge.

Providing and fixing 12mm (Twelve millimetre) thick preliminated particle board of Tesa/Centsury/Kitlam etc; flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. Pre-laminated particle board with decorative lamination on both sides complete as per architectural drawings and directions of engineer- in-charge, including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc; (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5mm to 6mm (Five millimetre to Six millimetre) thickness (weight not less than 12.50 kg/ sqm) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge.

Providing and fixing aluminium Pilot/sheel sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.

300x16mm (Three hundred into Sixteen millimetres) size

250x10mm (Two hundred fifty into Ten millimetres) nominal size

Providing and fixing aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etc.Tower bolts (Barrel type) bright finished with nuts and screws etc; including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.

150x10mm (One hundred fifty into Ten millimetres) nominal size

100x10mm (One hundred into Ten millimetres) nominal size

Providing and fixing aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.

125mm (One hundred twenty five millimetres) nominal size

100mm (One hundred millimetres) nominal size

Providing and fixing 100mm (One hundred millimetres) nominal size bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete as directed by the Engineer-Incharge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge.

poonam rana