SPECIAL REPAIRS AND REPLACEMENT OF ASBESTOS ROOF SHEETS OF MT SECTION P6 WITH GI ROOF SHEETS AT NAY AND ADDNALTN TO SERVENT QTR TOILET AT KATARIBAGH AND ADDNALTN OF BUILDING NO P66 B AT KATARIBAGH NAVAL BASE KOCHI UNDER GENW KOCHI

Amount

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, man holes etc and getting out in soft/loose soil complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for TMT bars 10mm dia and over including cut to length , bend to required shape , cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and directed.

M&L for TMT bars 5mm dia and over and including 10mm dia in stirrups, spacers and binders etc , cut to length, bent to shape required, including cranking bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC M-20 (Nominal Mix) Type A1 1:11/5:3 using 20mm graded stone aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Use and waste of Formwork rough finished flat surfaces of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and directed.

M&L for cement plaster 8 mm thick in cement mortar 1:4 with approved water proofing compound over backing coat of 12 mm thick in cement mortar 1:6 for external faces of walls complete all as specified and directed. Note:- The water proofing compound shall be measured and paid seperately under relevant item of this schedule.

Supply only Liquid water proofing compound complete all as specified.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon aditives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for rendering 10mm thick on brick or concrete wall surfaces with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thickness watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick cement concrete type D2, 1:4:8 (40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 25mm thick cement concrete type B0, 1:2:4 (12.5 mm graded aggregate) as in floor finish complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including provision of 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Glazed ceramic wall tiles in vertical surface 300 x 450 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles on vertical surfaces such as skirtings, dados and risers to steps etc. including provision of 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters, sliding/ side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) and 2 Nos 125mm long tower bolts complete all as specified and directed. Note: Aluminium frame, glass, wire netting shall be paid seperately under relevent Items.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of plain colour sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing all complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes or top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 ) used instead of exposed portion of PVC sheet beading.wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed.

S&F stainless steel butt hinges medium weight for 100mm size complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and directed.

Supply and fix aluminium anodised barrel tower bolt extruded section of 150 mm long complete all as specified and directed.

S&F vitreous china wash down water closet (pedestal pattern) white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and directed.

S&F plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or alumininsed hinging device complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete complete all as specified and directed.

S&F vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets complete all as specified and directed.

S&F pillar taps with aerator, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make: Parryware Cart Part No.Crust T3102A1 or equivalent in Hindware/Cera.

S&F SS grating square 125 mm size with centre circular section removal and fixing type complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glassshelf 12 cm wide with chromium plated guard and railing size 60cm long (with brass bracket complete all as specified and directed.

S&F corner glass shelf of 5mm thick plain sheet glass and with brass, chromium plated bracket complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20 mm graded aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and filling joints with colour pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of old tiles complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including ointing with solvent cement complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, on any colour, having tensil strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified and directed.

S&F powder coated aluminum snap grid false ceiling comprising of 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with stainless steel screws; having grid of size 605mmx605mm, including hangers 4 mm dia. GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia. 40 mm long and applying two coat of oil bound distemper on ceiling complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25cm thick (Soft/loose soil) complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.4923-1997 grade St.-240 complete all as specified and directed.

S&F 3mm thick aluminium composite panel of exterior grade with 0.50 mm thick of aluminium layers on both faces, wrapping to steel frame work by routing of joints, wrapping, bending or turning up/mitred angles as per site requirement and fixing with adhesive (Araldite) by popcorn pins and flat pressed the sheets using musking tape till the banding remain solid, complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of anti corrosive paint over a coat of appropriate primer complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and 10mm thick gypsum board of size 4' x 8' fixed or laid/inserted to GI frame work with screws icluding jointing tape, 2mm wall care putty and two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Supply and fix stainless steel curtain rod bright finished 25 mm dia decorative type complete all as specified and directed.

Supply and fix stainless steel bright finished decorative brackets/finials for curtain rail 25mm dia complete all as specified and directed.

Supply and fix door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor, 140mm over length of cover plates complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices and applying two coat of distemper oil emulsion over a coat of alkali resistant primer including 2-3mm thick wall care putty complete all as specified and directed.

Dismantling of floor hearth or wall tilling tiles including cement mortar bedding (but not backing) and disposing the rubbish off the premises complete all as specified and directed.

M&L for double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1 sqm in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.machine cut polished granite 1st quality complete all as specified and as directed. (Sample of granite should be passed by GE before execution of work)

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 40mm thick flush shutters, two face is covered with decorative face veneer with lipping/frame to match solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for new wooden surfaces of any description, over 10cm in width or girth with filler coat wood filler liquid transparent and application of one under coating and one finishing coating with synthetic varnish complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply and fix stainless steel butt hinges medium weight for 125mm size complete all as specified and directed.

Supply and fix aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and directed.

S&F 6mm thick tempered HD silver glass wall mirror, impact resistant shatter proof fixed with safety backing 6mm thick plywood on back side and first class hardwood polished wooden beading all round the mirror including necessary fixing arrangement complete all as specified and directed.

Dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets any gauge thickness including roof/wall covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to rain water gutteres wall fixed with self tapping screws complete all as specified and directed.

M&L for prepration of new steel surface and painting to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for prepration of old steel surface and painting to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described with one coats of synthetic enamel paint complete all as specified and directed.

Dismantling celing boards of any description, any thickness including cover fillets complete all as specified and directed.

S&F powder coated aluminum snap grid false ceiling comprising of 9mm thick gypsum carbonite celing boards, 60x60 cm in size fixed or laid/ inserted to aluminium framework with stainless steel screws; having grid of size 605mmx605mm, false ceiling frame work of angle 25x25x2mm, main TEE 38x25x1.5mm and cross TEE 25x25x1.4mm including hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40 x 3 mm size 60 mm long & expansion hold fastners 12.5 mm dia. 40 mm long and applying two coat of oil bound distmper on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment of plastered surfaces and applying two coats of oil bound distemper including primer preparatory to distempering on surfaces of walls complete all as specified and directed.

M&L for complete removal of existing treatment of plastered surfaces and applying three coats wash on surfaces of walls complete all as specified and directed.

M&L for complete removal of existing treatment on external wall and applying two coats of antifungal paint (weather coat) over a coat of primer complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for cement plaster 15 mm thick in cement mortar 1:4 finished even and smooth with out using extra cement finished even and smooth and mixed with WPC complete all as specified and directed. (Note: WPC shall be measured and paid seperately under relevant item of this schedule.)

Supply only integral water proofing compound complete all as specified and directed.

Demolition of brick work built in cement mortar, including all quine, arches, pillar etc complete all as specified and directed.

Material and labour for Brick work with fly ash, straight or curved on plan exc 6m mean radius in cm 1:6 complete all as specified and directed.

Demolition of cement concrete(un re-inforced) in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing cement concrete 1:2:4, Type B1 ( 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chemfered complete all as specified and directed.

Material and labour for point wiring for one light/fan point with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC conduit medium grade ISI marked concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm depth pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed by the Engr-in-Charge.

All as per item No 80 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 80 here in before but for one 5 pin 5 Amp socket outlet point on the same board complete all as specified and directed.

All as per item No 80 here in before but using with 2.5 Sqmm copper conductor cables multistranded (FRLS) PVC insulated , unsheated cable and including 2.5 Sqmm copper conductor cable multistranded(FRLS) PVC insulated and unsheated cable as earth continity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

Material and labour for submain wiring with 2 runs of 4 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC concealed conduit with all accessories on surface, one run of 2.5 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Two runs of 4 Sqmm size PVC copper cable, One run of 2.5 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

Material and labour for submain wiring with 2 runs of 6 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC concealed conduit with all accessories on surface, one run of 4 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Two runs of 6 Sqmm size PVC copper cable, One run of 4 Sqmm size PVC copper cable and one run of PVC conduit shall be measured as one unit length.

S&F modular type socket outlet 3 pin, 6 Amps complete all as specified and directed.

S&F switch modular type single pole, 6 Amps, one way all as per specified and directed.

S&F modular sockets multipurpose 6 Amp & 16 Amps, 5 pin complete all as specified and directed

S&F switch modular type single pole, 16 Amps, one way all as per specified & directed.

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals 240 Volt 50 Hz complete all as specified and directed.

S&F 230 V 10 KA 'C' curve miniature circuit breaker MCB SPN and current carrying capacity 40 Amp to 63 Amps in the DB Complete with connection testing and commissioning complete all as specified and directed.

S&F 230 V 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 5 Amp to 32 Amps in the DB Complete with connection testing and commissioning complete all as specified and directed.

S&F Sheet Metal Enclosure for MCB DB, SPN 12 Ways double door,with 200 Amps rated bus bar , having IP-43 protection including taking down of old DB complete all as specified and directed.

S&F SPN enclosure with two pin and earth plug and socket complete with one SP MCB, 20 Amps having breaking capacity 10 kA, including taking down old unserviceable eath plug complete all as specified and directed.

S&F regal batten universal type including crystal ultra bright glass 1x20 Watt LED tube light with double side connection , high luminous efficiency including suitable connection from ceiling rose complete all as specified and directed. Make : HAVELLS Cat No. REGALBATTENT8UPTO2X22W DSBSWH AND CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent make of any other manufactures in the approved list.

S&F recess mounted commercial luminaire 36 Watt,50 Hz, 220 Volts, 5700K LED down lighter 2'x2', complete all as specified and directed. Make: Crompton CAT PART No. LCTRH-36-FO-CDL or equivalent make of any other manufactures in the approved list.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300m Iincluding opening the wall and necessary arrangement for fixing complete all as specified and directed.

Materials and labour, earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 m below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch all as shown in electrical plate No 3 of SSR Part-I 2009 including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia), with 40x40x6mm MS angle iron frame including necessary earth work and testing on completion, complete all as specified and as directed.

S&F LED lights fitting 1x 20 W, 220V, AC decorative box type,125 lumen/watt with driver, holder and high quality materials and design exttruded aluminium housing enhances safety, high quality PC diffuser reliable and robust housing structure including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and as directed by the Engr-in-Charge. Make : Crompton cat part no. CCS 100-20-65-HL2-DP-NWH or any other manufacturer in the approval list.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type, linear aluminium high lumens out put LED batten made from aluminium extruded channel powder coated with opaque diffuser for glare fee light cmplete 125 lumen/Watt with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by the Engr-in-Charge. Make cat part no. Shakti SZSLAMX010-HLO or any other manufacturers in the approved list

S&F sheet metal enclosure for MCB DB, SPN, 4 ways, double door, with 200 amps rated bus bar, having IP-43 protection including taking down old DB complete all as specified and directed.

S&F exhaust fan, plastic body AC single Phase. 230V of size 250m sweep with, blades, and frame and louvers complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole neutral and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F wall/ceiling/floor on wall high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia including taking down old one complete all as specified and directed.

S&F bib cock, CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and directed. Make: Cera Model No F2008151 or any other manufacturers in the approved list

S&F concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and directed. Make: Cera Model No: F2002362 or any other manufacturers in the approved list

S&F 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for CPVC pipe complete all as specified and directed. Make: Cera Model No: F2008201 or any other manufacturers in the approved list

S&F swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe complete and all as specified and directed. Make: Cera Model No: F7020104CH or any other manufacturers in the approved list

S&F PVC connection pipe 15 mm dia (outer 450mm long cold water complete with brass union on both sides to suit 15mm GI/CPVC pipe and taking down old one, complete all as specified and directed.

S&F health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe, complete all as specified and directed. Make: Cera Model No: F8030107AB or any other manufacturers in the approved list

S&F CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all as specified and directed.

M/s ANTONY THOMAS AND CO (BID ID -3315982)

Oriental Constructions (BID ID -3310838)

M.J.JOY AND COMPANY (BID ID -3317196)

Vidya constructions (BID ID -3310473)

General Engineering and Constructions (BID ID -3311291)

MS BUILDERS (BID ID -3312088)

S&C ENTERPRISES (BID ID -3310888)