Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 LAccepted-AOC VILL P O DARGIA SAKRI TEHSIL DEHRA DISTT KANGRA HP | MANDI | HIMACHAL PRADESH | 175013 | L1 | Accepted-AOC Award | |
| 2 | L2₹7.3 L+₹14,503.47 (2.04%)Rejected-Finance | L2 | Rejected-Finance Lowest 2 | |
| 3 | L3₹7.3 L+₹16,517.50 (2.32%)Rejected-Finance R O VILL P O NAIN TEHSIL BARSAR DISTT HAMIRPUR H P | HAMIRPUR | HIMACHAL PRADESH | 174304 | L3 | Rejected-Finance Lowest 3 | |
| 4 | L4₹7.3 L+₹17,952.55 (2.52%)Rejected-Finance VILL P O PAROUR TEHSIL PALAMPUR DISTT KANGRA H P | KANGRA | HIMACHAL PRADESH | 176001 | L4 | Rejected-Finance Lowest4 | |
| 5 | L5₹7.6 L+₹51,151.05 (7.19%)Rejected-Finance | L5 | Rejected-Finance Lowest 5 |
Tender Value
Refer Docs
EMD Value
₹21,900
Closing Date
29 Jun 2021, 6:00 pmClosed
Executive Engineer
Executive Engineer HP PWD Division Tanda
Construction of Tanda road to Balla upto Martured Late Gunner Operator Bhagwan Dass Km 0/000 to 0/550 Mohal Sadarpur in Distt Kangra (HP) (SH- Formation cutting, retaining and breast walls cross drainage work, side drain and culvert).
2021_PWD_48733_2
PWD- Civil-2425-55-Tanda
Open Tender
Civil Works - Roads
Item Rate
90 days
Tanda
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
₹21,900
27 Jul 2021
19 Jun 2021
30 Jun 2021
19 Jun 2021
29 Jun 2021
19 Jun 2021
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm (Thirty centimeters) in depth, 1.5m (One point five metre) in width as well as 10 sqm (Ten square metre on plan) including getting out and disposal of excavated earth upto any lead as per drawing and HPPWD technical specification and as per directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals.
Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specifications clauses 614, 709, 1204.3.7 as per drawing and HP.PWD technical specifications, and as directed by Engineer-Incharge including carriage of material within all leads, lifts and other incidentals.
Backfilling behind abutment, wing wall and return wall complete as per drawings and technical specification Clause 1204.3.8, as per drawing and HP.PWD technical specifications and as directed by Engineer-Incharge including carriage of material within all leads, lifts and other incidentals.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (One cement : Five coarse sand : Ten graded stone aggregate 40 mm (Forty millimetres nominal size) as per drawing and HP.PWD technical specifications and as directed by Engineer-Incharge including carriage of material within all leads, lifts and other incidentals.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (One Cement : Three coarse sand): Six graded stone aggregate 40 mm (Forty millimetre) nominal size) complete etc as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (One Cement : Two coarse sand): four graded stone aggregate 40 mm (Forty millimetre) nominal size) complete etc as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1½:3 (One cement : One and half coarse sand) : Three graded stone aggregate 20 mm (Twenty millimetres) nominal size) as per drawing and HP.PWD technical specifications, and as directed by Engineer-Incharge including carriage of material within all leads, lifts and other incidentals.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Hot rolled deformed bars complete as per drawing and HP.PWD technical specifications and as directed by Engineer-Incharge including carriage of material within all leads, lifts and other incidentals.
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost ofcentering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above plinth level upto floor V levelas per drawing and HP.PWD technical specifications, and as directed by Engineer-Incharge including carriage of material within all leads, lifts and other incidentals.
Neeraj
parveen kumar
Sahil Sharma
atul thakur
Anuj KAHLOH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .