Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC | ₹5.5 L | L1 | Accepted-AOC MAY BE APPROVED |
| 2 | L2₹5.5 L+₹2,752.17 (0.50%)Rejected-AOC | ₹5.5 L+₹2,752.17 (0.50%) | L2 | Rejected-AOC MAY BE REJECTED |
| Sl No | Description | Qty | Unit | Muhammed Ajfar M S L1 | ANSAR U A L2 |
|---|---|---|---|---|---|
| 1.00Toilet Construction | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 3.88 | cum | 357.92 ₹1,388.37 Lowest | 359.72 ₹1,395.35 |
| 1.00 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 750.45 | kg | 139.71 ₹1,04,845.37 Lowest | 140.41 ₹1,05,370.68 |
| 1.00 | OD352338/2025-2026:Providing and fixing Aluminium profile sheets (size, shape and pitch of corrugation
as approved by Engineer-in-charge) 0.460 mm or nearest available thickness. The sheet shall be fixed using
self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/
vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size
and shape wherever required. | 16.25 | sqm | 790.4 ₹12,840.05 Lowest | 794.37 ₹12,904.54 |
| 1.00 | OD352335/2025-2026::Providing and fixing rain water gutter semi circular section using 150mm dia 6kgf
PVC pipe including fitting with 32x5mm flat supporting at 1m intervals complete as per the direction of
engineer in charge at site | 8 | metre | 476.39 ₹3,811.12 Lowest | 478.78 ₹3,830.24 |
| 1.00 | 50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | 16 | metre | 353 ₹5,648 Lowest | 354.77 ₹5,676.32 |
| 1.01 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 194.48 | kg | 763.94 ₹1,48,571.05 Lowest | 767.78 ₹1,49,317.85 |
| 1.01 | OD352337/2025-2026:Designing, fabricating,testing and installing Curtain Wall with Aluminium Composite
Panel Cladding, with open grooves for linear as well as curvilinear portions of the
building , for all heights
and all levels etc. including:
Providing, fabricating and supplying and fixing panels of aluminium composite panel
cladding INCLUDING
aluminium base frame work in pan shape in metalic colour of approved shades made
out of 3mm thick
aluminium composite panel material. The aluminium composite panel cladding sheet
shall be coil coated,
with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of
approved colour and shade on
face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel
screws, nuts, bolts,
washers, cleats, weather silicone sealant, backer rods etc.with aluminium composite
panel cladding till the
handing over of the building for occupation. The Contractor shall provide curtain wall
with aluminium
composite panel cladding, having all the performance characteristics all complete, as
per the Architectural
drawings, as per item description, as specified, as per theapproved shop drawings and
as directed by the
Engineer-in-Charge.However, for the purpose of payment, only the actual area on the
external face of the
curtain wall with Aluminum Composite Panel Cladding (including width of groove)
shall be measured in sqm.
up to two decimal places. | 35.52 | 1 sqm | 3,241.58 ₹1,15,124.71 Lowest | 3,257.87 ₹1,15,703.25 |
| 1.01 | OD352336/2025-2026:Supply and fixing 3D Acrylic letters ENGLISH LETTERS 25-30cm or MALAYALAM LETTERS 20-25cm for name board etc.. complete as per direction of Engineer in charge at site. | 110 | each | 406.14 ₹44,675.4 Lowest | 408.18 ₹44,899.8 |
| 1.01 | OD352339/2025-2026:Supplying and fixing in place Granite Name board of slab area less than 0.9sqm
including engraving and painting letters etc.. complete as per direction of Engineer in charge at site | 0.9 | each | 6,678.29 ₹6,010.46 Lowest | 6,711.85 ₹6,040.67 |
Tender Value
₹5.5 L
EMD Value
₹13,769
Closing Date
20 May 2026, 5:00 pmClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER LSGD THIRUVANIYOOR
Take break Puthercruz electrification completion in ward 6 of Thiruvaniyoor GP
2026_LSGD_850597_1
LSGD/CELSGD/TR/136226/2025
Open Tender
Electrical Works
Item Rate
180 days
THIRUVANIYOOR
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,215
₹13,769
1 Jul 2026
13 May 2026
22 May 2026
13 May 2026
20 May 2026
13 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Toilet Construction | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | - | kg | - | - |
| 1.003 | OD352338/2025-2026:Providing and fixing Aluminium profile sheets (size, shape and pitch of corrugation
as approved by Engineer-in-charge) 0.460 mm or nearest available thickness. The sheet shall be fixed using
self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/
vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size
and shape wherever required. | - | sqm | - | - |
| 1.004 | OD352335/2025-2026::Providing and fixing rain water gutter semi circular section using 150mm dia 6kgf
PVC pipe including fitting with 32x5mm flat supporting at 1m intervals complete as per the direction of
engineer in charge at site | - | metre | - | - |
| 1.005 | 50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | - | metre | - | - |
| 1.006 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 1 | kg | - | - |
| 1.007 | OD352337/2025-2026:Designing, fabricating,testing and installing Curtain Wall with Aluminium Composite
Panel Cladding, with open grooves for linear as well as curvilinear portions of the
building , for all heights
and all levels etc. including:
Providing, fabricating and supplying and fixing panels of aluminium composite panel
cladding INCLUDING
aluminium base frame work in pan shape in metalic colour of approved shades made
out of 3mm thick
aluminium composite panel material. The aluminium composite panel cladding sheet
shall be coil coated,
with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of
approved colour and shade on
face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel
screws, nuts, bolts,
washers, cleats, weather silicone sealant, backer rods etc.with aluminium composite
panel cladding till the
handing over of the building for occupation. The Contractor shall provide curtain wall
with aluminium
composite panel cladding, having all the performance characteristics all complete, as
per the Architectural
drawings, as per item description, as specified, as per theapproved shop drawings and
as directed by the
Engineer-in-Charge.However, for the purpose of payment, only the actual area on the
external face of the
curtain wall with Aluminum Composite Panel Cladding (including width of groove)
shall be measured in sqm.
up to two decimal places. | - | 1 sqm | - | - |
| 1.008 | OD352336/2025-2026:Supply and fixing 3D Acrylic letters ENGLISH LETTERS 25-30cm or MALAYALAM LETTERS 20-25cm for name board etc.. complete as per direction of Engineer in charge at site. | - | each | - | - |
| 1.009 | OD352339/2025-2026:Supplying and fixing in place Granite Name board of slab area less than 0.9sqm
including engraving and painting letters etc.. complete as per direction of Engineer in charge at site | - | each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1437248.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1437248.xls
BOQ • 0.31 MB
SBD.pdf
Tender Documents • 2.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .