PROVN OF INTERLOCKING PAVER BLOCKS ROAD CONNECTING OFFICERS MD ACCOMMODATION AND MESS, AT MAIN GATE AND BASKET BALL GROUND, FLOOR TILES AND LED LIGHT FITTINGS DG SET, AT PORBANDAR

Amount

SCHEDULE 'A'

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out in soft/loose soil.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cessipts, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in any type of soil.

M&L for sand filling in floor.or in foundation etc, including watering and consolidation etc complete all as specified and as directed.

Removing excavated material not exc. 50m and depositing where as directed by Engineer-in-Charge.

M&L removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point exceeing 50m but not exeeding 250m,.

M&L broken stone or boulders Hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified.

M&L PCC type D-2 1:4:8 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L PCC type C2 (1:3:6, using 40 mm graded stone aggegate) as in coping.

M&L RCC type B1 (Volumetrix mix) 1:2:4 using 20mm graded stone aggregate as in foundation including raft, footing, foundation beam and mass concrete complete all as specified and as directed.

M&L for RCC type B1 (Volumetrix mix) 1:2:4 using 20mm graded stone aggregates as in column, pillars, piers posts complete all as specified and as directed.

M&L Porbandar stone masonry well bonded, solidly hearted etc. built in cement mortar 1:6 all as specified and directed.

M & L Polished granite stone slabs 16 to 18mm thick coloured as in walls steps, jambs, pillars, windowcills,cooking platforms , cantilevers, shelves set and jointed with grey cement slurry and pointed in neat white cement slurry mixed with pigment to match the shade of slab, including moulding at front edge all as specified and as directed as in platforms including in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. etc complete all as specified and as directed by Engr-in-Charge. Note : Shade of granite shall be as approved by GE.

Use and waste of form work to sides of concrete foundation, footing and similar work vertical or batter, for rough finished flat surface of concrete complete all as specified and as directed.

Formwork use and waste of to sides of pillar, posts, columns etc fair finished, all as specified and directed by Engr-in-charge.

S&F Mild steel bands, straps, hold fasts, small articles, confirming to Fe 290 Gde E-165

M&L Mild steel TMT bars 10mm dia and above cut to length bent to shape required including cranking bending and binding with MS wire, of dia not less than 0.9mm complete all as specified and as directed.

M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and as directed.

M&L 100mm thick Plain Cement concrete type D-2, (1:4:8, using 40mm graded aggregate) as in sub base of floors all as specified

M&L 40mm thick Cement concrete type B-0. (1:2:4,12.5mm graded stone aggregate) as in floor finished fair And even without using extra cement etc complete all as specified and as directed by Engr-in-Charge.

M&L wall cladding digital coloured tile lamina beigh, rustic punch\ platinum size of tile 300mmx600mmx10mm thick in verticle surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Vitrified Ceramic tiles (Dark Shade) Double charged/ultracharged 10mm thick (square/rectangular) polished, area of each tile 0.36 sqm but not exceeding 0.42 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match. in floors etc. over screed bed of 15 mm thick cm 1:6 and pointed in white or coloured cement to match including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and stacking tiles and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.

M&LVitrified Ceramic tiles (Light Shade) Double charged/ultracharged 10mm thick (square/rectangular) polished, area of each tiles 0.36 sqm but not exceeding 0.42 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match. in floors etc. over screed bed of 15 mm thick cm 1:6 and pointed in white or coloured cement to match including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and stocking tiles and rubbish off the premises complete all as specified and as directed by Engr-in-Charge.

All as above item no 23.00 but as in skirting and dado

M/S Non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in wall dado/wall cladding, set and jointed in neat cement slurry and pointed in white or coloured cement to match. Note : The type of tile shall be lamina beigh, rusted punch/platinum of make : M/s Somany ceramic tiles.

M&L 80 mm thick Machine pressed precast concrete interlocking paver blocks of any colour any shape and size confirming to IS 15658-, M-40 Grade, with grey cement and pigment all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L 15mm thick Rendering on wall in CM 1:4, concrete surfaces finished fair and even without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) to receive tiles etc on verticle surfaces of wall complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces ,in cement mortar 1:4 mixed with even and smooth without using extra cement complete.complete all as specified and as directed.

M&L 15mm thick Rendering in CM 1:6, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking down cement plaster from brick walls including racking out joints scrubbing down with water etc to receive the plaster.complete all as specified and as directed by Engr-in-Charge.

M&L Complete removal of existing surface finish of old plastered surfaces on wall and applying two coats of Plastic emulsion paint over a coats of Primer Surface of any description over 10cm girth or width, not otherwise described etc complete all as specified and as directed by Engr-in-Charge.

M&L Complete removal of existing surface finsish of old plastered surfaces on ceiling and applying two coats of Plastic emulsion over a coat of Priming paints plaster coat Surface of any description over 10cm girth or width, not otherwise described etc complete all as specified and as directed by Engr-in-Charge.

DemolotionConcrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L Stainless steel section as in railing /grill/ balusters and Similar Items of grade SS-316 including dacoretive cups, all fittings etc including fixing & bolting in wall and floor etc complete all as specified and directed by Engr-in-charge.

M&L providing and fixing of Granules textured homogeneous wall finishing system consisting of of a two component system of Dry Granules (25 Kgs per pack) made of 92% silica Particles coated with fade resisteant pigments, 100% acrylic polymer bonding agent (5 Kgs per pack) with the applied thickness of the coating being between 0.8mm -1.2mm to be applied on a cured , smooth level plaster without keying, as per the shades/combinations approved, as per the manufacturer directions, for usages, to be applied by and approved applicator of the manufacturer, as per the directions/supervision of the Engineer-in-Charge, all complete . The above textureed coationg should confirm to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating top meet JISA 6909 on smooth plastered surface complete all as specified and as manufacturers specificataions /instructions. complete all as specified and as directed by Engr-in-Charge

M&L Earthing complete with excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to GI earth strip 32 x 6 mm by means of bolts nuts check nuts and washers of galvanized iron, all as shown in electrical plate No.3 of MES SSR Part-1 connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanised iron 40 mm dia bore light grade pipe and watering pipe shall be 20 mm bore medium grade, PCC pit with pre cast RCC cover, charcoal / salt funnel etc. complete all as directed. NOTE : (1) The conctrete pit shall be PCC 1:3:6 tye C -1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars with suitable cast iron handle shall be provided (ii) Item includes the cost of 7.5 m GI pipe for protection of earth strip (iii) Item includes the cost of 7.5 mtr length earth strip 32 x 6 mm (iv) Result of earthing is not less than 2 Ohm

Supply, lay & test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty)with stranded aluminium conductor, 1100 volts grade (Earthed ), of size 4 core 25 sq mm. all as specified and as directed by Engineer-in-Charge Make: havells/Plaza/Finolex

All as per item No 39.00 above but cable of size 4core 16sqmm Make: havells/Plaza/Finolex

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground calbes of size 63 mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini

All as per item No 41.00 above but pipe of size 50/38 mm

S&F DB VTPN, 4 Way, Double door, IP 43 Protection, with connected accessories like insulated bus bars, insulated neutral bars & earth bar, blanking plates, cable management kit, Incoming as MCB Four Pole 16 Amp C series 10 KA -01 No and Outgoing MCB SP 10-25 Amp C series -12 Nos complete all as spd and directed and comprising of following. Make: ABB/Schneider/Siemens

Supply and install,test of automatic boom barrier , Electro Mechanical, Motorised with 6 Meter boom (Aluminum Hollow Section 100x44mm) Open Time 4 Sec / RIGHT Installed/ 2 Nos Remote/ 600~800 Times Per day, STEEL Housing box , Support Stand , Control PCB & acces) Brand –Smartpower AC input Voltage 230 Volt 50 HZ -1P AC Input Power 200 Watt Motor AC generared haevy duty Output Power 320 Nm Opening and closing timing 4 Sec Barrier dimensions 620 H x335 w x 285 d , with red reflective strips with Phost beam sensor 1 pair (In case somebody is standoing below the boom when closing the boom will stop (optional 1 ) complete including excavation and earth work in any type of soil and PCC foundation as per manufacturer's instructions. BARRIER GATE - Model - SP BB 100 6M4S (6 Mtr 4 Sec) / FAAC / GODREJ

M&L Point wiring complete with 1.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through and including PVC heavy duty conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I, ISI marked including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall / On surface of roof ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, switch sockets, fan regulators with required modules complete all as specified and as directed by Engineer-in-Charge. for the following:- Note: Cost of cutting / chasing on wall and making good after repair shall be measured and paid seperately. Make of cable: Havells/ Finolex/ RR Kable/ KEI a)One light /fan point / bell point controlled by one, one way switch

b) One 3 pin 6 Amps socket outlet on same board

c) One 3 pin 6 Amps socket outlet on independent board .

Material and Labour for Point wiring complete with 2.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through and including PVC heavy duty conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessedin wall / On surface of roof ceiling etc including 2.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame for modular switches, sockets,switch sockets for one 3 pin 15 or 16 Amps on independent board with required modules complete all as specified and as directed by Engineer-in-Charge. Note: Cost of cutting / chasing on wall/floors/ceilings and making good after repair shall be measured and paid seperately. Make of cable: Havells/ Finolex/ RR Kable/ KEI

S&F Modular switch 1 way, 6 Amps, 1 module (ISI Marked) complete all as specified and as directed by Engineer-in-Charge. Make: Crab tree (Athena) / Havells (Oro) / Anchor (Vision)

S&F Modular switch 1 way, 16 Amps, 1 module (ISI Marked) complete all as specified and as directed by Engineer-in-Charge.Make: Make: Crab tree (Athena) / Havells (Oro) / Anchor (Vision)

S&F Modular socket, 6 Amps, 2/3 pin combined 2 module (ISI Marked) complete all as specified and as directed by Engineer-in-Charge. Make: Crab tree (Athena) / Havells (Oro) / Anchor (Vision)

S&F Modular socket, 6/16 Amps, 2/3 pin combined 2 module (ISI Marked) complete all as specified and as directed. Make: Crab tree (Athena) / Havells (Oro) / Anchor (Vision)

S&F Modular fan regulator, 120Watt, 2 moduler (ISI Marked) complete all as specified and as directed. Make: Crab tree (Athena) / Havells (Oro) / Anchor (Vision)

S&F Bell Multi music type complete all as specified and as directed. Make: Crab tree (Athena) / Havells (Oro) / Anchor (Vision)

S&F Modular bell push, flush type, 240Volts, 6 Amps, 1 module (ISI Marked) complete all as specified and as directed. Make: Crab tree (Athena) / Havells (Oro) / Anchor (Vision)

S&F Ceiling rose, surface bakelite, 65 x 17mm, three terminals (ISI Marked) complete all as specified and as directed. Make: Crab tree (Athena) / Havells (Oro) / Anchor (Vision)

S&F Ceiling rose, surface bakelite, 65 x 17mm, three terminals (ISI Marked) complete all as specified and as directed. Make: Crab tree (Athena) / Havells (Oro) / Anchor (Vision)

S&F 19/ 20W Surface/Wall mounted Batten LED Luminaire connected with 3 core flexible copper cable of appropriate size from ceiling rose to LED fitting complete all as specified and directed, fixed in repairs Make : Wipro Trim LED (LL20-281-XXX-65AL1/Philips (BN308C-LED40S-6500 L120 PSU WH) or OSRAM LUXPOWER BATTEN 19WL840)/ Bajaj Cat no (BLTRU 20W WH VIVA)

S&F 12W Recessed mounted round shape LED downlight including electric connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to fixture complete all as specified and directed, fixed in repairs. Make :Wipro (CRDL11R017HP57) /Philips (Green Perform) / OSRAM (optivalu) Note : Cost of cutting and fittings in exisitng false ceiling deemed to be included in quoted rate.

Supply and fix in replacment DBs triple phase and neutral 04 way with standard bus bar, Din bar etc in repair double door all as specified

Supply and fix RCBO three phase and neutral, 63 Amp, 240Volt complete all as specifed and as directed Make Legrand/Hager/L&T

Supply and fixing MCB SP, 6 to 32 Amp, 10 KA , C series, 240 Volt complete all as specified and as directed Make Legrand/Hager/L&T

M&L for sub main wiring with two run of 4.0 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through ad including PVC concealed conduit heavy duty grade ISI marked 25mm dia external but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 4.0 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire fixed on wall/ceiling complete all as specified and directed. Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ HPL/ RR Kable/ KEI / L&T

Taking down exisitng unservicable submain wiring along with acessories all as specified and as directed

Taking down exisitng unservicable point wiring along with acessories all as specified and as directed

Taking down ceiling fan, painting with syntheitic enamel paint by spray M.c including filling cavities, with filler one coat after cleaning all as directed and hanging after repair and painting connecting with cable all as specified and as directed

S & F single pole and neutral enclosures with pin and earth plug and sockets complete and in repair all as specifed and as directed

RUDRAAY CONSTRUCTION

JAMNAGAR ELECTRIC AND MACHINERY CO

M/S Rajendra Constructions