New Construction of P.H.C. Building with P.M. Room,Compound wall @ Village:Saykha, Ta:Vagra, Dist : Bharuch.

Name of Work : - New Construction of P.H.C. Building with P.M. Room, Compound wall @ Village : Saykha, Ta : Vagra, Dist : Bharuch.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Excavation for foundation upto 1.50 Mt depth including sorting out and

Rupees One Hundred

S.O.R. 2024-25, It. Code stacking of useful materials and disposing of the excavated stuff for any lead

No.: 04B001A 701.00 and lift. (A) Loose of Soft soil. (Executed with Machinaries)

Cu.Mt. 117.08 Seventeen And Paise Eight

Excavation for foundation for depth from 1.50 M to 3.00 M including sorting

S.O.R. 2024-25, It. Code out and stacking of useful materials and disposing of the excavated stuff up to Rupees One Hundred Twenty

2 365.00 50 Meter lead. (A) Loose or soft soil. (Executed with Machinaries) Cu.Mt. 129.80

No. : 04002A Nine And Paise Eighty Only

Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 hand

broken stone aggregate 40mm nominal size) and curing comoplete excluding Rupees Two Thousand Six

S.O.R. 2024-25, It. Code

3 162.00 cost of form work in (A) foundation and plinth Cu.Mt. 2640.21 Hundred Forty And Paise

Twenty One Only

Providing and laying controlled cement concrete M250 work with curing etc.

S.O.R. 2024-25, complete including the cost of from workbut excluding cost of Reinforcement Rupees Four Thousand Seven

4 RATE ANALYSIS No.:- 43.00 for RCC work in (A) Foundation footing base of columns and mass concrete. Cu.Mt. 4770.51 Hundred Seventy And Paise

01 Fifty One Only

Providing and laying controlled cement concrete M250 work with curing etc.

S.O.R. 2024-25, complete including the cost of from workbut excluding cost of Reinforcement Rupees Seven Thousand

5 RATE ANALYSIS No.:- 20.00 for RCC work in Column upto Plinth Level. Cu.Mt. 7711.00

02 Seven Hundred Eleven Only

S.O.R. 2024-25, Providing and laying controlled cement concrete M250 work with curing etc.

complete including the cost of from workbut excluding cost of Reinforcement Rupees Six Thousand Fifty Six

6 RATE ANALYSIS No.:- 28.00 Cu.Mt. 6056.17

03 for RCC work in Beam. at Ground level. And Paise Seventeen Only

Brick work using common burnt clay Building bricks having crushing strength

not less than 35 Kg/ Sq.Cm. In foundation and plinth in cement mortar 1:6 (1 Rupees Four Thousand

S.O.R. 2024-25, it. Code

No.:- 06002BA 247.00 Cement: 6-Fine sand) with curing etc. (b) Conventional Cu.Mt. 4021.02 Twenty One And Paise Two

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Filling in available excavated earth (excaluding rock ) in trenches. Plinth, sides

S.O.R. 2024-25, it. Code of foundation etc. in layers not exceeding 20cm. in depth consolidating each Rupees One Hundred Thirty

No. :- 04006 disposited layer by rammng and watering . And Paise Thirty Nine Only

Filling in foundation and plinth with murrum or selected soil in layers of 20 cm.

S.O.R. 2024-25,it. Code thickness including watering, ramming and consolidating etc. Complete. Rupees Two Hundred Eighty

No.:- 04008A Nine And Paise Six Only

Filling in plinth with sand under floors including watering ramming,

S.O.R. 2024-25, It. Code consolidating, and dressing etc. comp. Rupees Four Hundred Sixty

no.:- 04007A And Paise Nineteen Only

Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand: 4 Crushed

stone aggregate 20 mm nominal size )And finishing smooth with curing Rupees Three Thousand Eight

11 RATE ANALYSIS No.:- 82.50 complete. Including the cost of form work but excluding the cost of Cu.Mt. 3839.24 Hundred Thirty Nine And

04 reinforcement for R.C.C. work in (A) plinth slab having 10cm thickness, road. Paise Twenty Four Only

Providing and laying Ordinary cement concrete 1:2:4 (1 - cement :2 - coarse

S.O.R. 2024-25, sand : 4 - graded stone aggregates 20mm nominal size)for RCC Copping Rupees Five Thousand Five

12 RATE ANALYSIS No.:- 26.00 including finising smooth with, curing etc. complete including the cost of form Cu.Mt. 5576.40 Hundred Seventy Six And

05 Paise Forty Only

work but excluding the cost of reinforcement. (G.F.)

Applying general insecticide pest control treatment to floors, cupboards etc

including labour material etc. complete. Using Heptachloride 20 EC. As Per

6113_pests Consentration Weight 0.50 percent is recommended one litre

S.O.R. 2024-25, it. Code chemical emulsion dillute with 39 liter of water will give. Total dillute Rupees Forty And Paise

No.:- 22006 concrentration will be 40 litre inclusive of one litre chemical emulsion Eighty Nine Only

appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S

Providing and laying controlled cement concrete M200 work with curing etc. Rupees Seven Thousand

14 RATE ANALYSIS No.:- 29.00 complete including the cost of from workbut excluding cost of Reinforcement Cu.Mt. 7743.00 Seven Hundred Forty Three

06 for RCC work in Column (G.F.) Only

Brick work using common burnt clay building bricks having crushing strength

S.O.R. 2024-25, It. Code not less than 35 Kg/ Sq.Cm. In Super Structure above plinth level up to floor Rupees Four Thousand Two

15 No.:-06002BA + 178.00 two level in cement mortar 1:6 (1 Cement: 6-Fine sand) with curing etc. Cu.Mt. 4289.33 Hundred Eighty Nine And

06006B Paise Thirty Three Only

(b)Conventional. for G.F.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Half brick masonry in common burnt clay conventional bricks having crushing

S.O.R. 2024-25, It. Code strength not less than 35 Kg/ Cm2 in cement mortar 1:4 (1 cement : 4- Coarse Rupees Six Hundred Fifty One

16 No.:- 06008A2A + 129.00 sand) in super structure above plinth level up to floor two level (b) Sq.Mt. 651.67

06010B And Paise Sixty Seven Only

Conventional. (for GF)

Providing and laying controlled cement concrete M-200 with curing etc. Rupees Seven Thousand One

17 RATE ANALYSIS No.: - 10.50 complete including the cost of form work but excluding the cost of Cu.Mt. 7129.11 Hundred Twenty Nine And

07 reinforcement for R.C.C. work in Lintel. (G.F.) Paise Eleven Only

Providing & Laying cotrolled cement concrete M200 For R.C.C chajja Including Rupees Six Thousand Three

18 RATE ANALYSIS No.:- 2.50 Smooth with curing etc. complete including the cost of form work but Cu.Mt. 6386.48 Hundred Eighty Six And Paise

08 excluding. the cost of reinforcement (G.F) Forty Eight Only

Providing and laying controlled cement concrete M-200 with curing etc.

S.O.R. 2024-25, complete including the cost of form work but excluding the cost of Rupees Six Thousand Four

19 RATE ANALYSIS No.:- 36.50 reinforcement for R.C.C. work in Beam for up to floor two level. (G.F.) (b) beam Cu.Mt. 6425.00

09 Hundred Twenty Five Only

Providing and laying controlled cement concrete M-200 with curing etc.

S.O.R. 2024-25, complete including the cost of form work but excluding the cost of Rupees Seven Thousand One

20 RATE ANALYSIS No.:- 2.50 reinforcement for R.C.C. work up to floor two level (G.F.)(A) Stair case Cu.Mt. 7117.00

10 Hundred Seventeen Only

Providing and laying controlled cement concrete M-200 with curing etc.

S.O.R. 2024-25, complete including the cost of form work but excluding the cost of Rupees Six Thousand Three

21 RATE ANALYSIS No.:- 67.50 reinforcement for work for any thickness of slab etc. complete. (G.F.) Cu.Mt. 6301.00

11 Hundred One Only

Providing and laying ordinary cement concrete 1:2:4 (1 cement : 2 coarse sand:

4 graded stone aggregate 20 mm. nominal size) and finishing smooth with

cutting etc. complete including the cost of form work but excluding the cost of Rupees Eight Thousand Six

S.O.R. 2024-25, It. Code

No.:- 05031B3 4.50 reinforcement for RCC work in (B) Columns : (ii) Having cross sectional area Cu.Mt. 8692.87 Hundred Ninety Two And

more than 0.12 Sqmt. and upto 0.18 Sqmt. (Perapet Column) Paise Eighty Seven Only

Providing T.M.T. Bar FE 500D reinforcement for RCC work including bending,

S.O.R. 2024-25, It. Code binding and placing in position etc. complete upto floor two level. Rupees Seventy Six And Paise

No.:- 05014C Twenty One Only

Brick work using common burnt clay Building bricks having crushing strength

not less than 35 Kg/ Sq.Cm. In Super Structure above plinth level up to floor Rupees Four Thousand Two

S.O.R. 2024-25, It. Code

No.:- 06002BA+06006B 37.00 two level in cement mortar 1:6 (1 Cement: 6-Fine sand) with curing etc. Cu.Mt. 4289.33 Hundred Eighty Nine And

(b)Conventional. for F.F. Paise Thirty Three Only

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and fixing alluminium colour anodized single shutters Doors having

standared extruded alluminium colour anodized hollow sections Prtly

Openable and Partly Fixed Type With frame of size 101 mm x 44.5 mm x 2 MM

(aproximate wt 2.60 kg per Rmt) and door styles and top rail of alluminium

section size 47.5 mm x 44.5 mm x 2 MM (approximate wt 1.25 kg per rmt) and

bottom rail and lock rail per door of size 114 mm x 44.5 mm x 2 MM tHICK (

S.O.R.2024-25, aproximate wt 2.75 kg per rmt) and providing rubber gasket and glazing clips Rupees Three Thousand Four

25 RATE ANALYSIS No.:- 6.50 around the glass all over including providing 9 mm thick decorative water Sq.Mt. 3450.53 Hundred Fifty And Paise Fifty

proof Both side prelaminataed pressed wood based board with fixing Glasing

clips 19 X 17 mm including providing heavy locks handels stopers pivots door

closers and Ground Glass 5 mm thick (Frosted or obscured on one side) on top

with fixing Glasing clips 19 X 17 mm including all labour and equipments etc

Providing and fixing 35 mm. thik Flush door shutters for doors including

Indian Teak Wood Frame 12 x 7cm. size including Flush door shutters, solid

core construction with frame of first class hard wood with cross board and face Rupees Three Thousand

S.O.R. 2024-25, RATE Veneer or Plywood face panels, including anodised alluminium butt hinges

ANALYSIS No.:-13 42.50 Sq.Mt. 3014.39 Fourteen And Paise Thirty

with necessary screws. (B) Non - decorative type and block board core Nine Only

anodised alluminium butt hinges in flush door shutters (i) 35mm thick.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and fixing 30mm thick FACTORY MADE SOLID SINGLE SIDE PRELAM

PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of

gauge thickness and size of 19mm x 19mm for stiles, and 15mm x 15mm for

top and bottom rails. The M.S. frame shall have coat of steel primers of

approved make and manufacture. The M.S. frame shall be covered with 5mm

thick and 75mm wide single side prelim PVC "C" channel of size 30 x 50mm to

form stiles and 5mm thick and 75mm wide single side prelim PVC sheets shall

be for the top, bottom and lock rails. paneling of 5mm thick one side prelim

sheet to be fitted in the M.S. frame and sealed to the front (Prelam side) stiles

and rails (Which should have a 5mm 45 degree bent portion as beading)and Rupees Two Thousand

S.O.R. 2024-25, It. Code attached to the back (white/ivory) stiles and rails (which should have a 10mm

No.:- 10045. 19.00 Sq.Mt. 2023.03 Twenty Three And Paise

90 degree bent portion as beading) using 2 nos. 15mm wide x 5mm thick PVC

sheet beading, Inside the 9 degree bent beading. All stiles, rails and beading to

be jointed to the panel using solvent cement. An additional 5mm thick PVC

strip of 20mm width is to be struck on the interior side of the "C" channel using

PVC solvent adhesive and 10mm thick (5mmx20) thick 20mm width cross PVC

shee to be fitted as gap insert for top and bottam rails, etc. complete as per

direction of Engineer in charge, manufacture's specification and drawing.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing & fixing in position standard extruded Aluminum Three track with

Three sliding shutters in which Two Shutters with Glass and one shutter with

Stainless Steel Mosquito net In Opening Possition always one of Mosquito net

shuuter should be in Close Possition all window section with colour anodized

in which Bottom Frame Section 92.00 x 29.5 X 1.20 mm (having wt per Rmt

1.005 Kg) Frame section having three track top and side of section size 92.00 x

29.50 x 1.20 mm size (having wt per Rmt 0.907 Kg) with top section for all

Three shutters Top and Bottom rail 20.00 x 50.00 x x 1.50 mm ( having weight

per Rmt = 0.642 Kg) handle section of size 20.00 x 50.00 x x 1.50 ( having

S.O.R. 2024-25, weight per Rmt = 0.571 Kg ) and interlock rail 20.00 x 50.00 x x 1.50 mm ( Rupees Two Thousand Five

28 RATE ANALYSIS No.:- 24.00 having weight per Rmt = 0.697 Kg ) of approved shade & sliding shutters and Sq.Mt. 2552.20 Hundred Fifty Two And Paise

14 providing rubber gasket and Glsing Clips if necessary around the glass allover Twenty Only

including providing heavy handle, heavy lock, bracket, stoppers.In Two Shuuter

Glass 4 mm thick (Frosted or obscured on one side) fixed with transparent

silicon gasket and in one Shutter Stainless Steel Mosquito net C.S. 304 (Reliance

Brand) Approved Quality as directed By Enginner Incharge including all

required materials labours and equipments as per detailed drwg. as directed.

Providing & fixing glazed louvered glass windows and ventilators with teak Rupees Four Thousand One

S.O.R. 2024-25, It. Code wood frame 10cm. x7 cm. size including 3 coats of oil painting to wood work

No.:-10029AA. 17.50 Sq.Mt. 4143.57 Hundred Forty Three And

etc complete. Paise Fifty Seven Only

Providing and fixing in position collapsible steel shutters with vertical channels

20 X 10 X 2mm braced with flat iron diagonals 20 X 5 mm size with top and

bottom rails of T- irn 40 X 40 X 6mm with 38mm dia steel pulleys, complete Rupees Five Thousand Seven

S.O.R. 2024-25, It. Code

No.;- 11003A. 4.25 with bolts, nuts, locking arrangements stoppers, handles including applying a QUINT 5787.15 Hundred Eighty Seven And

priming coat of read Iead paints Paise Fifteen Only

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing in and frame around square or

S.O.R. 2024-25, It. Code round bars with round headed bolts and nuts or by screws. (A) Plain Grill. Rupees One Hundred Two

No.:- 10025AA. 12MM SQUARE BAR 3INCH C/C WITH 25MMX6 MM FLATS FRAME. And Paise Sixty Two Only

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and fixing 0.75meterwide and 0.80Meter hight sand which type

platform including supplying and fixing granite stone 15mm to 18 mm thick

S.O.R. 2024-25, mirror polished stones in top and side position and vertical strip at front over Rupees Five Thousand Five

32 RATE ANALYSIS No. - 11.50 25 mm thick polished kotah stone platform fixing in top and sides and Sq.Mt. 5547.07 Hundred Forty Seven And

15 Paise Seven Only

intermediates supports fixing with cement mortar and adhesive and finishing

Providing and fixing Godrej Type Steel cupboards in wall withsteel frames and

S.O.R. 2024-25, shutters using 18 gauge M.S. steel sheet including necessary fixtures , fastening Rupees Two Thousand One

33 RATE ANALYSIS No. - 20.50 like locks handles, hinges with approved shade of sparay painting etc complete Sq.Mt. 2104.00

16 Hundred Four Only

Providing and laying machine cut free edges machine polished Kota stone for

S.O.R. 2024-25, shelves in cupboard and walls in single piece (Miximum 150) 25 mm. th. Rupees Nine Hundred Forty

34 RATE ANALYSIS No. - 7.25 including cutting grooves in walls and fixing the stone with neat cement slurry Sq.Mt. 941.00

in true line and level as direct.

Providing and Laying 24"x24"(600mm x 600mm) Vitrified 8 mm thick tile

flooring over 20 mm (average) base of cement mortar 1:6 (1 cement : 6 corse

sand ) on new surface or existing flooring by adhesive material including Rupees One Thousand Four

35 S.O.R. 2024-25, 14022A 407.00 dismentaling of existing flooring and jointed with colour cement slurry Sq.Mt. 1415.77 Hundred Fifteen And Paise

including finished with flush pointing & cleaning the surface etc. complete. for Seventy Seven Only

light shade.(For Full Body Tiles / Double Charged).

.Providing & laying polished Kota stone slab flooring over 20 mm (Average)

thickbase of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1:1.5 laid

over and jointed with gray cement slurry mixed with pigment to match the Rupees Nine Hundred Seventy

14012AA. 51.00 shade of slab including rubbing & polishing etc. complete. Sq.Mt. 976.72 Six And Paise Seventy Two

(A) 25 mm thick. Only

Providing. & laying polished kota stone slab 25 mm th. in risers of steps,

skirting Dedo and pillars laid on 10mm thick cement mortar 1 :3 (1 cement : 3 Rupees One Thousand One

coarse sand)and jointed with gray cement slurry mixed with pigment to match

37 S.O.R. 2024-25, 14013A 12.00 Sq.Mt. 1121.48 Hundred Twenty One And

the shade of slab including rubbing & polishing etc complete.

Paise Forty Eight Only

Providing and laying ceramics tiles 6mm thick in flooring treads of steps and Rupees Nine Hundred Fifty

S.O.R. 2024-25, landing laid on a bed of 12 mm. thick cement plaster 1:3 (1 cement : 3 coarse

14008BA. 58.50 Sq.Mt. 957.63 Seven And Paise Sixty Three

sand) finishing with flush pointing in white cement. Only

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and Rupees Nine Hundred Ninety

S.O.R. 2024-25, dedo on 10mm thick cement plaster 1:3 (1: cement :3 coarse sand) and jointed

14009BA. 608.00 Sq.Mt. 995.81 Five And Paise Eighty One

with white cement slurry. Only

Providing and laying polished Green Marble stone 15mm to 18mm thick in

Door Frame, Window Jambs laid on 10mm thick cement mortar 1:3 ( 1 cement

: 3 coarse sand ) and jointed with grey cement slurry with matching pigment Rupees One Thousand Five

40 RATE ANALYSIS No. - 90.00 Sq.Mt. 1517.00

18 incl. rubbing and polishing etc complete colour and shed as approved by Hundred Seventeen Only

achitect and engineer in charge.

Providing 10 mm thick cement plaster in single coat on Ceilling and sofits of

stairs up to floor level for interior plastering upto floor two level and finished Rupees Two Hundred

41 475.00 even and smooth in cement mortar 1:3 (1 cement : 3 sand) including finishing Sq.Mt. 213.18 Thirteen And Paise Eighteen

with a floating coat a neat cment slurry. Only

Providing 15 mm thick cement plaster in single coat on bricks/concret walls

for interior plastering up to floor two level and finished even and smooth in Rupees Two Hundred Thirty

42 613.00 cement mortar 1:3 (1 cement : 3 sand) including finishing with a floating coat a Sq.Mt. 235.92 Five And Paise Ninety Two

neat cement Slurry. (FOR G.F.) Only

Providing 15 mm thick cement plaster in single coat on bricks/concret walls

for interior plastering up to floor two level and finished even and smooth in Rupees Two Hundred Thirty

S.O.R. 2024-25, 17002A cement mortar 1:3 (1 cement : 3 sand) including finishing with a floating coat a

+ 17004A 314.00 Sq.Mt. 235.92 Five And Paise Ninety Two

neat cement Slurry. (FOR F.F.) Only

20mm.thick sand faced cement plaster on walls upto height 10 meters above

ground level consisting of 12mm. Thick backing coat of CM.1:3 (1-cement:3- Rupees Three Hundred

44 S.O.R. 2024-25, 17009 1299.00 sand) and 8mm.thick finishing coat of C.M. 1:1 (1-cement:1-sand) etc. Sq.Mt. 329.29 Twenty Nine And Paise

complete. Twenty Nine Only

Distempering (two coats) with oil bound washable distemper of approved

brands and manufacture & required shade on wall surface to give an even

shade over and including a priming coat with alkali resistance primer of Rupees Seventy One And

45 S.O.R. 2024-25, 18021 1402.00 approved brand after throughly brushing the surface and other foreign matter Sq.Mt. 71.90

Paise Ninety Only

and also including preparing the surface even and sand parpared smooth.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Applying two coats of putty & two coats of primer of approval brand and

manufacture on new wall surface to give an even shade including thoroughly Rupees Forty And Paise Fifty

46 S.O.R. 2024-25, 19032 1402.00 brushing the surface free from mortar dropping and other foreign matter and Sq.Mt. 40.59

sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

Coats ) to give an required shape even shade after thoroughly brushing the Rupees One Hundred

47 S.O.R. 2024-25, 19031 1299.00 surface to remove all dirt and remains of loose powdered material etc Sq.Mt. 114.53 Fourteen And Paise Fifty

complete. Three Only

Painting two coats (including priming coat ) on new steel & other metal

S.O.R. 2024-25, 19001 surfaces with enamel paint brushing interior to give an even shade including Rupees One Hundred Twenty

48 55.00 cleaning the surface of all dirt , dust & other foreign matter. Sq.Mt. 122.65

+ 19002 Two And Paise Sixty Five Only

Providing and laying chaina mosic water proofing treatment on terrace

including applying neat cement slurry 2.75 Kg./Sqm. Of cement admixed with

water proofing compound after cleaning the surface (b) laying cement concrete

usig brick bats 25 to 100 mm size with 50% C.M. 1:5 (1 cement : 5 coarse sand)

admixed with water proofing compound over 20 mm thick layer of C.M. 1:5 to

S.O.R. 2024-25, required slope including rounding of junction of walls and slabs (a) after two Rupees One Thousand Ninety

49 RATE ANALYSIS No. - 450.00 days of proper curing applying a second with 20 mm thick C.M. 1:4 and china Sq.Mt. 1091.00

mosaic tiling and finally finishing the surface with trowel white cement slurry

(e) after finishing the whole terrace shall be flooded with water for a period of

Providing and fixing 3mm thick PVC sheets as signage and display of health

signs/information of required size having retro reflective letters/design as per

S.O.R. 2024-25, requirement, fixing the same through approved adhesive etc. complete, work Rupees One Hundred Sixty

50 RATE ANALYSIS No. - 27.00 shall be carried out as per instruction of engineer-in-charge. (Approved make NOS. 165.00

PVC foamed sheets only)(45 x 15 cms))

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of read lead paint. (A)In beams Rupees Five Thousand Eight

S.O.R. 2024-25, and joists, channels angles Tees, flats, with connecting plates or angle cleats as

11001AA 5.00 Quintle. 5818.65 Hundred Eighteen And Paise

in main and cross beams. Hip and jack rafters, purlins conneted to common Sixty Five Only

rafters and the like.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing powder coated G.I. sheet of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead complete excluding the cost Rupees Seven Hundred

52 S.O.R. 2024-25, 15001A 32.00 of purlins, Rafters and Trusses. (1) 0.80 mm thick sheet. (with one side blue Sq.Mt. 727.13 Twenty Seven And Paise

and one side white of JSW brand or Similer) Thirteen Only

Providing and fixing pre-cast Rubber Dye/ Steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic

compressed/vibrated mechanically and as per approved design Confirming to Rupees Six Hundred Eighty

53 S.O.R. 2024-25, 14033 235.00 IS 15658 : 2006 including 35mm Sand layer for levelling and filling the joint Sq.Mt. 685.42 Five And Paise Forty Two

with sand in proper line and level as per guidlines of IRC : sp 63-2018 etc. Only

Fabricating, supplying and fixing in position SS railing for Staircase with brush

finish and 304 grade as per Indian Standard and detailed drawing grinding, Rupees Two Thousand Eight

S.O.R. 2024-25, RATE

ANALYSIS No. - 26 35.00 cleaning and filling the welded spots with SS finish (Only standard Rmt. 2878.50 Hundred Seventy Eight And

measurments will be paid for) Paise Fifty Only

Earthwork for embankment including breaking clods, dressing with all lead Rupees One Hundred Sixty

S.O.R. 2024-25, and lift (excluding watering and consolidation)(E) From Borrow area within

26001EA 140.00 Cu.Mt. 161.22 One And Paise Twenty Two

3.0 Km. Lead. Only

Excavation of tree planting pit of size 600 x 600 mm at a depth of 450 to

mm . Filling of Good quality Garden soil or river bed in excavated pits, with Bio-

Fertiliser (VERMI COMPOST 50 grams & COCO PIT 50 grams )and / or COW

DUNG Fertiliser with anti termite treatment of Gamaksine / Hexamine or

Chloroparyphos for plants as specified ratio as per manufactures specification.

Planting of Tree Plant in filled up pit and to be ponding with water. Plants Rupees Two Hundred Twenty

S.O.R. 2024-25, RATE should have green and good growth and it should be brought from Nursery to

ANALYSIS No. - 27 15.00 No. 227.25 Seven And Paise Twenty Five

site in good condition, roots and girth of plant should be good enough for fast Only

growing etc. complete as per satisfaction of EIC.. The plant height (6' To 8")

and Colour are specified below.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Excavation of tree planting pit of size 600 x 600 mm at a depth of 450 to

mm . Filling of Good quality Garden soil or river bed in excavated pits, with Bio-

Fertiliser (VERMI COMPOST 50 grams & COCO PIT 50 grams )and / or COW

DUNG Fertiliser with anti termite treatment of Gamaksine / Hexamine or

Chloroparyphos for plants as specified ratio as per manufactures specification.

Planting of Tree Plant in filled up pit and to be ponding with water. Plants Rupees One Hundred Seventy

S.O.R. 2024-25, RATE should have green and good growth and it should be brought from Nursery to

ANALYSIS No. - 27 15.00 No. 176.75 Six And Paise Seventy Five

site in good condition, roots and girth of plant should be good enough for fast Only

growing etc. complete as per satisfaction of EIC.. The plant height (6' To 8")

and Colour are specified below.

Excavation of tree planting pit of size 600 x 600 mm at a depth of 450 to

mm . Filling of Good quality Garden soil or river bed in excavated pits, with Bio-

Fertiliser (VERMI COMPOST 50 grams & COCO PIT 50 grams )and / or COW

DUNG Fertiliser with anti termite treatment of Gamaksine / Hexamine or

Chloroparyphos for plants as specified ratio as per manufactures specification.

Planting of Tree Plant in filled up pit and to be ponding with water. Plants Rupees One Hundred Seventy

S.O.R. 2024-25, RATE

ANALYSIS No. - 27 15.00 should have green and good growth and it should be brought from Nursery to No. 176.75 Six And Paise Seventy Five

site in good condition, roots and girth of plant should be good enough for fast Only

growing etc. complete as per satisfaction of EIC.. The plant height (6' To 8")

and Colour are specified below.

Excavation of tree planting pit of size 600 x 600 mm at a depth of 450 to

mm . Filling of Good quality Garden soil or river bed in excavated pits, with Bio-

Fertiliser (VERMI COMPOST 50 grams & COCO PIT 50 grams )and / or COW

DUNG Fertiliser with anti termite treatment of Gamaksine / Hexamine or

Chloroparyphos for plants as specified ratio as per manufactures specification.

Planting of Tree Plant in filled up pit and to be ponding with water. Plants

S.O.R. 2024-25, RATE

should have green and good growth and it should be brought from Nursery to Rupees One Hundred Fifty

site in good condition, roots and girth of plant should be good enough for fast One And Paise Fifty Only

growing etc. complete as per satisfaction of EIC.. The plant height (6' To 8")

and Colour are specified below.

AZADIRECTA INDICA--NEEM

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees Rupees Twenty Eight

cut earlier and disposal of unserviceable materials (C) By mechanical means in Thousand Three Hundred

area of light jungle Ninety Three And Paise Four

Providing & fixing ISMB 150mmx75mmx10mm, 125mmx75mmx8mm M.S.

Angle framed work for Cattle trap with 80mm dia (Heavy Duty) G.I. Pipe fixing

Row 150mm C/c Distance & 50mm x 10mm M.S. Flat (clamp fixing) Including Rupees Seven Thousand

S.O.R. 2024-25, RATE

ANALYSIS No. - 28 10.50 cutting, bending and welding and a priming coat of red lead paints and two coat Sq.Mt. 7013.07 Thirteen And Paise Seven

of oil paint as directed. Only

Supplying and spreading of stone aggregate of an 40mm to 63mm Size

machine cut of an approved quality frm quarry site to site of work including Rupees One Thousand Six

S.O.R. 2024-25, RATE

ANALYSIS No. - 29 60.00 loading unloading with all load and lift etc . For road Cu.Mt. 1661.24 Hundred Sixty One And Paise

Twenty Four Only

Supplying & Spreading of stone dust materials From out side borro area Rupees One Thousand Five

S.O.R. 2024-25, RATE inqluding loading -anloading with all load and lift etc comp. For road

ANALYSIS No. - 30 40.00 Cu.Mt. 1501.40 Hundred One And Paise Forty

Providing and fixing "Y" shape Concretina razer coil Fencing 10 mm C/c.

mm x 40 mm x 6mm Angle For "Y" And 40 mm x 40 mm x 6 mm Angle For

S.O.R. 2024-25, RATE Bottam & sides As Shown In Drawing & G.I. Barbed Roll Fencing 10 cm C/C Rupees Five Hundred Seventy

64 200.00 Spray & oil Painting. wire properly Affixed with G.I wired on Both sides Rmt. 574.00

ANALYSIS No. - 31 Four Only

Including Concrete work (In C.M. 1 : 2 :4) etc complete.

Supplying and fixing reinforced concrete heavy duty non-pressure pipes with

collars for culverts including setting and joining the pipes in C.M. 1:2 watering Rupees Three Thousand Two

65 S.O.R. 2024-25, 26135 12.50 and laying (To level of slopes of I.S.458 / 1971 Class NP3 casted by vertically Rmt. 3246.19 Hundred Forty Six And Paise

vibrated technology of following Internal diameter. (V) 900 mm dia. Nineteen Only

Providing and laying and jointing in true line and level UPVC Pipe (SCH 40) line

including fitting make or equivalent as approved by enginer in charge pipe

shall be fixed on the wall with the help of clamps at every 2m C/C or shall be Rupees Seventy Two And

consealed as directed including necessary fittings etc including testing of pipes

Paise Sixty Five Only

and joints and fixing the same with adhesive solvent including cost of all

materials. (A) 15mm

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and laying and jointing in true line and level UPVC Pipe (SCH 40) line

including fitting make or equivalent as approved by enginer in charge pipe

shall be fixed on the wall with the help of clamps at every 2m C/C or shall be Rupees Ninety One And Paise

consealed as directed including necessary fittings etc including testing of pipes

Eighty Four Only

and joints and fixing the same with adhesive solvent including cost of all

materials. (B) 25mm

Providing and laying and jointing in true line and level UPVC Pipe (SCH 40) line

including fitting make or equivalent as approved by enginer in charge pipe

shall be fixed on the wall with the help of clamps at every 2m C/C or shall be Rupees One Hundred Forty

consealed as directed including necessary fittings etc including testing of pipes

Eight And Paise Twelve Only

and joints and fixing the same with adhesive solvent including cost of all

materials. (C) 40mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with Rupees Two Hundred Seventy

69 S.O.R. 2024-25, 23004F 20.00 special falnge compression type fittings, wall clipsetc. including making good RMT 277.43 Seven And Paise Forty Three

the wall ceiling and floor. (F) 75mm. 10.0 Kg. F/Cm2 Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with Rupees Three Hundred Thirty

70 S.O.R. 2024-25, 23004G 150.40 special falnge compression type fittings, wall clipsetc. including making good RMT 336.24 Six And Paise Twenty Four

the wall ceiling and floor. (G) 110mm. 10.0 Kg. F/Cm2 Only

Supplying and fixing reinforced concrete heavy duty non pressure pipes with

S.O.R. 2024-25, collars for culvets including setting and jointing the pipes in C M 1:2 watering Rupees Three Hundred Forty

and laying (to level or slope) of IS class NP2 of following internal diameters (i)

26088AA. Eight And Paise Four Only

Providing & fixing S.W. gully trap with C.I. grating brick masonary chamber &

Rupees One Thousand Two

water tight C.I. cover with frame of 300 mm x 300 mm size (inside) with

standard weight (i) square mouth trap (B) 150mmX 100mm Size Por R type.

NOS 1249.92 Hundred Forty Nine And Paise

Ninety Two Only

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100mm

Rupees Five Hundred Fifty

diameter with jali of the following nominal diameter of self cleansing desing

with CI screwed down or hinged grating including the cost of cutting and

NOS 558.36 Eight And Paise Thirty Six

making good the walls.

Providing & Fixing white or coloured glazed China Veterious China Orissa

Pattern water closet squatting (INDIAN TYPE)pan size 580 mm. x 440 mm. Rupees One Thousand Three

4.00 including providing and fixing vetrious china 100 mm. size S or P trap NOS 1392.05 Hundred Ninety Two And

including jointing the trap with pan and soil pipe in C.M. 1:1 including all fitting Paise Five Only

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and fixing wash down water closet (european type W C pan) with

integral P and S trap including jointing the trap with soil pipe in cement mortar

1:1 ( 1 cement fine sand) including Providing and fixing Plastic Seat and cover

Rupees One Thousand Six

S.O.R. 2024-25, 23010 for wash down water closet with C.P. brass hinges and rubber buffers and also

includes provide and fixing jet wash Facilities complete

NOS 1633.86 Hundred Thirty Three And

(A)Vitereous China Pattern:

Paise Eighty Six Only

(I) in White Colour

Providing and fixing Veterious China flat back wash basin with single hole for

S.O.R. 2024-25, 23018 Rupees One Thousand Seven

pillar trap with CI or MS brackets painted with including cutting holes and

making good the same including all necessary fittings in white colour.including

NOS 1734.86 Hundred Thirty Four And

23021A Paise Eighty Six Only

pillar trap15mm Dia & Waste Pipe (PVC)32mm Dia.

Providing and fixing ( 600 X 450 X 150 mm) size vitreous china laboratory sink Rupees Two Thousand Two

77 S.O.R. 2024-25, 23019 1.00 with CI or MS brackets painted white including cutting holes in wall and NOS 2280.27 Hundred Eighty And Paise

making good the same 40 mm dia CP waste couplin rails etc. complete. Twenty Seven Only

Providing and fixing 15 mm dia brass chromium plated screw down bib taps. Rupees One Hundred Eighty

13.00 NOS 186.83 Six And Paise Eighty Three

Providing and Fixing pillar tap top capston head screw down bib high pressure

Rupees Three Hundred Eight

79 S.O.R. 2024-25, 23029A 7.00 with screws shanks and back nuts.(A) 15mm dia NOS 308.73

And Paise Seventy Three Only

S.O.R. 2024-25, Providing and fixing brass Cromiam Plated Sergical handle Cock of Size 15mm Rupees One Thousand Nine

80 RATE ANALYSIS No. - 1.00 dia.etc. NOS 1009.24

21 And Paise Twenty Four Only

Providing and fixing brass Cromiam Plated brass half trun Flush cock of Rupees Two Hundred Fifty

81 S.O.R. 2024-25, 23032A 8.00 approved quality including fixing in pipe line etc Complete. 25mm dia. NOS 254.78 Four And Paise Seventy Eight

Providing & fixing gun metal check or non-return full way wheel valve (A)15 Rupees One Hundred Eighty

82 S.O.R. 2024-25, 23031A 2.00 mm dia. NOS 186.83 Six And Paise Eighty Three

Providing & fixing gun metal check or non-return full way wheel valve (C)25

Rupees Four Hundred Twenty

And Paise Sixty Three Only

Providing & fixing gun metal check or non-return full way wheel valve (E) 40 Rupees Six Hundred Sixty

84 S.O.R. 2024-25, 23031E 4.00 mm dia NOS 663.43 Three And Paise Forty Three

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass with Rupees Eight Hundred Thirty

85 S.O.R. 2024-25, 23024 7.00 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs NOS 833.73 Three And Paise Seventy

with C.P brass screws and washers. Three Only

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing & fixing C.P. Brass towel rails complete with C.P. brass brackets fixed Rupees Six Hundred Three

to wooden plugs with C.P. brass screws (B) 600 mm x 20 mm size

And Paise Nineteen Only

S.O.R. 2024-25, RATE Providing and fixing in position PVC Cowel vent to pipes (ii) 110 mm. dia Rupees One Hundred Seventy

ANALYSIS No. - 22 Six Only

Constructing brick masonry chamber for underground C.I. Inspection chamber

and bends with briocks having croshing strength not less than 35Kg. Cm2 in

C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of

Rupees Three Thousand Six

S.O.R. 2024-25, cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

NOS 3660.76 Hundred Sixty And Paise

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

Seventy Six Only

smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe

line with one or two inlets.

Construction Septic Tank with R.C.C. slab in C.C. 1 : 2 : 4 including excavating

filling bed concrete C.C. 1 : 4 : 8, 0.15 mt. thick buffer wall with outer periferal

S.O.R. 2024-25, RATE Rupees Forty Eight Thousand

89 2.00 brick masonary wall 0.23 m thick in C M 1 : 5 Including finishing with cement NOS 48036.00

ANALYSIS No. - 23 Thirty Six Only

plaster 15 mm thick in C M 1 : 4 With C.I. main hall cover as per details drawing

Providing sock pit of specific volumn of 13.00 Cum volumn including

excavating pit upto 5.00mt depth, on base of P.C.C. honeycomb brick masonary

work 0.35mt thick upto 0.30mt below G.L. One 6'th copping is provided

S.O.R. 2024-25, RATE (including reinforcement) on parifare of brick masonary work, Dry brick Rupees Eighty Five Thousand

masonary work is provided 0.30mt above G.L. At Top 0.15 mt thick R.C.C. 1:2:4

ANALYSIS No. - 24 Ninety Six Only

Slab is provided Including Cast iron cover 455mm x 610mm Size and out side

15mm smooth plaster is provided on expose surface providing 2.00mt Internal

Providing sock pit of 5.00 Cu.Mt. volume Including excavating and filling brick

Rupees Three Thousand

S.O.R. 2024-25, bats with dry masonary work at top for 45 cm. height Including covering the

top with stone Including providing vatas in C.M. 1 : 3 with finishing curing etc.

Each. 3372.19 Three Hundred Seventy Two

And Paise Nineteen Only

complete as directed.

Providing erecting and fixing double coated Syntex or equivalent PVC. (ISI)

Rupees Three And Paise

92 S.O.R. 2024-25, 22014 3500.00 mark water tank of reqd capacity each with all necessary fittings & connection LITER 3.95

Ninety Five Only

etc. comp on terrace.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and drilling of 300mm Pilot bore hole in alluvial strata by directed

rotary rig & remaining bling lowering housing casing of Print bore hole

mm dia Including assembling lowering housing casing strainer pipe casing pipe Rupees Three Thousand

S.O.R. 2024-25, RATE

75.00 of 200 mm dia screens pipe of 20 mm dia with a = 4 mm to 6 mm best Quality RMT 3386.00 Three Hundred Eighty Six

of Sevalia gravel lowering the Submersible mortar of 2Hp along with flat PVC Only

cable panel board of 3Hp single phase 230 volts etc.

Providing and Supplying hospital locker. The bedside locker has single drawer

and cabinet with lock and with plastic molded handle. There is space between

plastic top and the cabinet to keep the general items for the frequent use.

Cabinet is Provisionided with lock to keep the valuable items for the safety

overall dimensions should be 490mmW x 410mm D x 941mm H.Corner tube

made of ERW round tube with section 25.4 mm dia of 1.2 mm thickness.

Cabinet made of CRCA sheet of 0.8 mm thick Provided with lock. (470 mm x

410 mm x 382 mm). Top made of ABS of 22 mm thick Top has recessed and

contoured shape for better aesthetic and usability. Plastic molded knob is

Provisionided with Matt finish and dome shaped for better grip. Plastic mold Rupees Eleven Thousand Nine

94 Locker 6.00 castors with 50 mm dia placed in diagonal locking arrangement RAL white,

Hundred One Only

plastic parts in Grey 5 kg UDL on both the tops and 10 kg in the cabinet. All

metal components are pre treated with zinc phosphating in 7 tank process and

then powder coated with anti microbial epoxy polyester powder coating to

fulfill the requirements for bacterial protection against at least 2 commonly

found bacteria in Hospital environment [Gram positive and Gram

Negative].goods are supplied in knocked down construction to reduce carbon

emission. The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

Providing and Supplying of IV pole of saline stand. Overall dimension should be

250 mm PCD with height adjustable from 743 mm to 1150 mm. it is fully SS

made used on bed with telescopic rod for height adjustment. The bottom

adapted is 12 mm dia, fixed tube is 15.9 mm dia, 1.6 mm thick ERW Tube. Rupees Four Thousand Four

Telescopic rod is 12 mm dia ERW tube. there are 2 nos 6 mm dia hooks to hand

Hundred Thirty Five Only

saline bags. Maximum load bearing capacity is 2kg per hook. The rate shall

include all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and Supplying of Examination couch with full storage of Examination

couch with full storage-overall dimension of L 2065 X W 850 X H 850 mm. The

backrest has ratchet mechanism for tilting the backrest. Leg frames and

intermediate frames should be made of ERW tubes having sectio section of 30 x

x 30 square tubes with thickness of 1.6mm. Nylon 6 leg shoes is given to avoid

wear and tear, MS sheet metal lying surface of thickness 1.2mm is used. Top

sheet metal panel base frame of 25 x 25 ERW square tubes of thickness 1.6mm

is used. Ratchet is made of MS Strip with section 40 x 4 to Provision the Rupees Twenty Six Thousand

96 Examin couch 3.00 backrest tilt The table is Provided with Leathrite calf rest which is adjusted on

Six Hundred Only

ss304 made lithotomy rod. The Rod and the calf rest is ht adjustable and swivel

to achieve desired position. The table is Provided with SS bowl stand to collect

fluids and discharge during procedure. Table is pre-treated and powder coated

with epoxy powder coating. Safe working load is 135kg. The rate shall include

all materials, hardware, and labour etc. complete as per instruction of engineer-

Providing & Supplying of round stool should have of round stool. Overall

dimension should be Diagonal Leg Dia 538 mm H470 min-655max. Top plate

made of SS 304 made sheet with spin section of thickness 1mm & non

corrosive. It has a diameter of 305mm, seat base made of MS ring and

rectangular tube. EN8 Screw having dia of 22 mm is used for height adjustment

of the seat base. The round hub made of MS ERW tube having dia of 38mm and

thickness 2 mm. The Hub is welded with the legs and it accommodate and

Rupees One Thousand Five

97 Revolving Stool 4.00 cover the lead screw mechanism. The under-structure consist of 4 legs made No 1550.00

up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed

Hundred Fifty Only

pipe leg give a round & clean look. All the legs is Provided with 4 nos of Nylon-

6 bush. All metal components are pre treated with zinc phosphating in 7 tank

process and then powder coated with epoxy polyester powder coating . Safe

working load is 135kg .The rate shall include all materials, hardware, and

labour etc. complete as per instruction of engineer-in charge.

supplying and fixing s.s 304 laboratory stool for hospital used PSP-1037-SS

Stool 14" Square stainless steel 18 gauge contoured seat Stainless steel base

Rupees Nine Hundred Twenty

98 Square stool 6.00 with heel rest for added comfort Tubular legs fitted with rubber shoes No 920.00

pretreated and power coated. As directed by Engineer in charge etc complete

Providing and fixing curtain (Cotton fabrics of rate of Rs. 400 per sqmtr +

Rupees One Thousand Fifty

99 Curtain 55.00 support cotton cloth) with Aluminum rod of dia 40 to 50mm dia with SS rings Sqmt 1053.00

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Ward Care Bed Delux (Plain Bed) (I.C. 7500) (1900mmL X 91OmmW X

61OmmH .) Providing & Supplying a Ward Care Bed Frame work of specially

designed CRC rectangular heavy tube. machine pressed CRC sheet top with

Rupees Four Thousand Five

100 PLAIN HOSPITAL BED 10.38 proper support. SS head & foot bows with laminated panels. Four side saline Sqmt 4500.00

arrangement location L.eg fitted

with shoes. Pretreated & Powder coated. Selection as per Engineer-In-Charge

etc. completed. ( As per Photo attached)

Supplying of Dust bin of approved brand Sintex or equivalent (as per Rupees One Thousand Five

101 100 LT DUSTBIN

photographs) of 100 Liter Capacity

Hundred Sixty Only

Providing and Supplying STRETCHER ON TROLLEY should have Strecher on

trolley with Overall dimension should be 2005 mm (L) x 666 mm (W) x

mm (H). It should be removable stretcher on trolley mointed on castors.. The

trolley should be made of 31.75 mm and 25.5 mm dia 1.2 mm thick and 1.5 mm

thick ERW tube. The casters should be 200 mm dia diagonai lockable castors,

Rupees Thirty One Thousand

stretcher understructure should be made of 25.4 mm dia 1.6 mm thick ERW

102 Stretcher on trolley

tube and the top should be made of 1.2 mm thick CRCA sheet. The stretcher

No 31834.00 Eight Hundred Thirty Four

should have provision to mount IV pole at four corners. The product should be Only

pre treated and powder coated with Epoxy polyster powder coating. The

maximum load bearing capacity should be 135 kg. The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-

Providing and Supplying Foldable wheel chair should have Foldable wheel

chair with Over all dimension should be (L) 790 x (W) 600 x (H) 870mm

Foldable frame structure should be made of section 22x1 2mm A3 carbon steel

with chrome finish. Cross bar should be made of A3 carbon steel with section

25.4 x 1.2mm. The Rear wheel should be made of 24 inch Solid mag wheels

with alloy in the rim Integrated handrim shoud be provided to drive the wheel

chair of section 16x1.2mm A3 carbon steel with chrome finish. The front wheel

should be of 8 inch HUB made of PA polymer and outer with solid rubber. PU

molded arm rest and base should be made of ABS for better arm support There

Rupees Sixteen Thousand

103 Folding wheel chair 1.00 No 16290.00

should be Leatherite strap for calf rest and leatherite cushion for seat. The foot Two Hundred Ninety Only

rest should be Adjustable alluminimum die cast foot rest with updown and

swivel type mechanism and Push Handles should be made of moulded rubber

grip to push the wheelchair. Hand brakes should be provided to lock the

wheelchair at desired location. The finsih of chair should be antirust chrome

The rate shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and Supplying Three-Fold partition screen should have Three-Fold

partition screen- Overall dimension, L 2637 X W 640 x H 1729 MM. Frame

should be made of ERW tube with movable plastic hinges. The fix frame should

be made of 25.4 mm dia 1.2 mm thich ERW tube, the movable frame shouuld be

made of 19 05 mm dia 1.2 mm thich ERW tube and the leg frame should be

Three fold partition made of 30 mm sugare tube with 1.6 mm thick. The fixed portion should be Rupees Ten Thousand

1075 mm width and the movable portion should be 778 mm width. 50 mm dia

screen Seventy Three Only

wheel castors should be provided All MS parts should be pre treated and

powder coated with thermosetting epoxy polyester. Green color Casement

fabric must be provided for modesty. The rate shall include all materials,

hardware, and labour etc complete as per instruction of engineer-in charge

Providing and Supplying of Instrument trolley should have ISO 13485

certificate from NABCB certified agency. CE certificate from european notified

body with 4 digit registration code, ISO 9001:2015, ISO 14001:2015 and ISO

45001 2018 Certified and should be mandatorily submitted along with Bid of

Instrument trolley-SS 304 sheet should be provided at top for the placement of

the instruments being used and also for easy in portability. SS 304 sheet should

Rupees Twenty Two

Instrument Trolley be provided at the top as well as bottom shelf for keeping the instrument being

2.00 used. Horizontal bars should be welded with legs so as to provide protection at

No 22844.00 Thousand Eight Hundred

sides with supporting legs giving a sturdy look. Castors of 125mm Dial should Forty Four Only

be used for easy in movement Overall Dimension: 775mm X 531mm X 915mm

H. Maximum safe working load must be 40kg. The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in

Providing and Supplying of Medicine trolley should have Medicine trolley

Overall dimension - 902(L) X 532(B) X 915(H) mm Top Top shelf shelf and

bottom shelf should be made of SS304 sheet with 1mm thickness and 1.2mm.

Rest of the components like supporting legs, horizontal bar handle should be

Rupees Twenty Three

made of SS 304 pepe having dia 31. 8. 12.7 mm respectively. The castors of

106 Medicine Trolley

high quality plastic injected molded and ant static having the dia of 125mm

No 23986.00 Thousand Nine Hundred

should be used Handles made of SS 304 pipe having section of 16mm and etc

Eighty Six Only

complete thickness of 1.2mm should be used. The rate shall include all

materials hardware, and labour etc. as per instruction of Engineer in charge.

Supplying & installing Biomedical waste trolley of 60 Liter capacity of Best

BIO MEDICAL WASTE Rupees Twenty One

107 3.00 Plastic & approved brand & selected colour etc.(As per Photograph) Sintex of No 21500.00

TROLLEY Thousand Five Hundred Only

Equivalent.(Set of 3 Bucket)

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing & Supplying of Storwel with Greenguard, Indoor Advantage Gold,

GreenPro etc. & should be mandatorily submitted along with Bid.Storwel plain

shall have an overall size of 916mm(W) x 486mm(D) x 1981mm(H) with

welded construction. It should have the shelf thickness of 0.7 mm, Back

thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all

other components shall have a thickness of 0.9mm. These components shall be

made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain

Rupees Fourteen Thousand

108 STEEL CUPBOARD 15.00 should have a Mazak handle and Three way locking mechanism with Shooting No 14400.00

Bolts. It should have a height wise adjustable shelf mounting which shall have a

Four Hundred Only

Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10

Screw type Leveller with Hex plastic base. The finishing shall include Epoxy

powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options

and shelving options shall be available.The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

Supplying of Dust bin of approved brand Sintex or equivalent (as per Rupees Three Thousand Six

109 240 LT DUSTBIN

photographs) of 240 Liter Capacity

Providing and Placing Slotted Angle Rack : 1300 W X 500 D X 1895 H mm. To Rupees Eight Thousand Five

110 SLOTTED ANGLE RACK

be provided with 5 Shelves. Blotless Rack made of CRCA Steel.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing & Supplying main table with ERU & pedestal of the following

specifications. 2350x2350x750 Primary Work Surface Made of 25mm thick

MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm

PVC membrane pressed on to top Soft closing access flap with in-build power

box are provided on work surface for wire management.Secondary Work

Surface Made of 25mm thick MDF one side pre-laminate board confirming to IS-

14587:1998 with 0.4mm PVC membrane pressed on to top.Modesty Panel

Made of 25mm thick MDF one side pre-laminate board confirming to IS-

14587:1998 with 0.4mm PVC membrane pressed on to top.Under structure

Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved

EXECUTIVE TABLE shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick

PVC lipping.Integrated Pedestal Made of 25mm Thick Pre-laminated twin Rupees Sixty Four Thousand

111 WITH SIDE UNIT-2350 1.00 No 64250.00

MM board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge Two Hundred Fifty Only

banded with matching 2 mm thick PVC lipping.Drawer fronts made of 25mm

thick MDF one side pre-laminate board confirming toIS-14587:1998 with

0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-

FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides.

Drawer extension is 325 MM.Drawers have a soft closing & anti slam

mechanism.Handles are provided for ease of opening.Pedestals are provided

with lock for security.The rate shall include all materials, hardware, and labour

etc. complete as per instruction of engineer-in charge.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing & Supplying public seating. SEAT SHELL : The Seat is made from high

density self-skin Polyurethane foam reinforced with 1.2 mm M.S. perforated

sheet insert. The Polyurethane foam having density of min. 350 kg/m3 with a

Shore 'A' hardness of 60±10.SEAT SIZE : 52.0 cm (W) x 50.5 cm (D)BACK

SHELL : The Back is made from high density self-skin Polyurethane foam

reinforced with 1.2 mm M.S. perforated sheet insert.The Polyurethane Foam

having density of min. 350 kg/m3 with a Shore 'A' hardness of 60±10.BACK

SIZE : 52.0 cm (W) x 53.5 cm (H)CROSS BEAM : Cross Beam made up of

Diamond shaped double wall Extrusion of Aluminum 6063-T6 Alloy with

coated of 50 micron epoxy polyester coating and fitted with Polypropylene

Copolymer engineering plastic end caps.CROSS BEAM SIZE : 11.3 cm (W) x

cm (H) X 0.4 cm (Thickness).LEG : Legs are made up of High pressure

3 SEATER WAITING

Aluminum ADC12 Die cast coated with 50 micron epoxy polyester coating, Leg Rupees Twenty Thousand

CHAIR WITH CUSHION

Are fitted with soft grip PVC level adjusting shoes.ARMREST : Armrest are Five Hundred Only

made up of High pressure Aluminum ADC12 die cast coated with 50 micron

epoxy polyester coating.SEAT SUPPORT BRACKET Assembly : Seat support

bracket assembly made up of argon shield welding of Hot Rolled Steel (IS:

2062) 0.3cm Thickness. This welded structure is coated with 50 micron epoxy

polyester coating.CLAMPING BRACKET : Clamping bracket are made up of Hot

Rolled Steel (IS: 2062) 0.3cm Thickness coated with 50 micron epoxy polyester

coating.Overall Dimensions of Chair-Seat Height - 42.5 cm.Height -

cm.Width-165.5cm and Depth-66.5 cm.The rate shall include all materials,

hardware, and labour etc. complete as per

instruction of engineer-in charge.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing & Supplying cafe chair with desklet.The Seat and Back should be

made up of injection moulded indoor grade PolyPropylene compound SEAT

SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H).The

powder coated ( DFT 50±10 microns ) welded tubular frame should be made

0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade

PolyPropylene compound and snap fitted with tubular frame. The Armrest

should be made of indoor grade PolyPropylene compound and assembled over

the tubular frame. The "L" shaped desklet should be made of 1.8+-0.05cm thick

Rupees Four Thousand Fifty

prelaminated particle board with 0.2+-0.05cm thick injection moulded poly Only

proplylene all around. Desklet should have back and front adjustment of 4.4+-

0.5cm. The paper tray should be made of 0.4mm thick MS rod which is spot

welded to form a mesh like structure.Overall Dimensions of Chair-Seat Height -

45.0 cm. Height - 84.5cm.Width-57.5 cm and Depth-67.8 cm.The rate shall

include all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

Providing and Placing Single Bed Mattress ,pillow,bedsheet with pillow cover

,with 12mm thick prelam mdf back- 900x1950x100mm - goldline plus pu form

40 density 300 gsm cottan satin quilt cover.Mattress back putti made of 12mm

Matresses with pillow Rupees Nine Thousand Five

114 6.00 thick prelam mdf bothside white finish.Kurlon dew pillow 600x400 Fill: No 9558.00

& bedsheet Hundred Fifty Eight Only

Polyester Fibre Quality of shell fabric: 110 GSM cotton satin patti Outer Shell

Layer: Cotton Fill Weight (in gms): 650.Bedsheet with pillow 100% cotton of

bombay dyeing or eq.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing & Supplying office table of the following specifications. Its size shall

be 1200 Width x 600 Depth x 740 Height . The top shall be made from 25 mm

thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge

band all around . Side panels shall be made from 25 mm thick pre- laminated

paticle board . All the edges are sealed with 2 mm thick PVC edge band on the

user side and 0.8 mm on the top and bottom side .The side panels have 2 glide

screws each for levelling of the desk.

OFFICE TABLE 1200 x Modesty panel shall be made from 18 mm thick pre- laminated particle board . Rupees Seven Thousand Sixty

115 6.00 All the edges are sealed with 0.8 mm thick PVC edge band all around.

Freestanding Pedestal shall be made from 18 mm pre- laminated particle board

with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed

surfaces as per requirement . The drawers are provided with suitable slides for

smooth operation . All the pedestal drawers are centrally locked with a single

key .Drawer slides are of Hettich.The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing & Supplying office table of the following specifications Its size shall

be 1500 Width x 750 Depth x 740 Height . The top shall be made from 25 mm

thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge

band all around . Side panels shall be made from 25 mm thick pre- laminated

paticle board . All the edges are sealed with 2 mm thick PVC edge band on the

user side and 0.8 mm on the top and bottom side .The side panels have 2 glide

screws each for levelling of the desk.

OFFICE TABLE 1500 x Modesty panel shall be made from 18 mm thick pre- laminated particle board . Rupees Seven Thousand Eight

116 2.00 All the edges are sealed with 0.8 mm thick PVC edge band all around.

750 mm Hundred Only

Freestanding Pedestal shall be made from 18 mm pre- laminated particle board

with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed

surfaces as per requirement . The drawers are provided with suitable slides for

smooth operation . All the pedestal drawers are centrally locked with a single

key .Drawer slides are of Hettich.The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and Supplying High Back Chair SEAT/BACK A SSEMBLY. The seat is

made up of 12±0.1cm thk hot pressed plywood measured. The Back is made up

of injection moulded glass filled nylon andupholstered using Mesh fabric with

high tenacity yam SEAT SIZE: 470 cm (W) x 51.5 cm (D)* BACK SIZE: 45.0 cm.

(W) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR

polyurethane seat foam is moulded with density 45+/-2 kg/m² and hardness

16 ± 2 kgf as per IS:7888 for 25 Percent compression ARMRESTS The

adjustable armrest is designed with the following features Up-Down

adjustment- 8 steps (8 0±0.Scm range) Height adjustable armrest structure

which is Powder Coated and fitted with an armrest top Fixed Armrest Top is PU

moulded over metal insert LUMBAR SUPPORT ASSEMBLY The Lumbar suppor

consists of polypropylene pad with moulded polyurethane foam and covered

with polyester fabric. The Height of Lumbar pad can be adjusted through two

projecting knobs provided on the rear side of the paß Lumbar pad has an

adjustment of 8.0 ± 0.5 cm in height. FRONT PIVOT SYNCHRO MECHANISM The Rupees Twelve Thousand One

117 High Back Chair 8.00 adjustable tilting mechanism is designed with the following features 360° No 12171.00

Hundred Seventy One Only

revolving type Single point control-Front-pivot for tilt with feet resting on

ground ensuring more comfort. Tilt tension adjustment-4-position locking with

anti-shock feature Seat/back tilting ratio of 1:2 PNEUMATIC HEIGHT

ADJUSTMENT The pneumatic height adjustment has an adjustment stroke of

10.0 ±0.3 cm Pedestal Assembly the pedestal is injection moulded in black

Percent glass filled nylon and fitted with 5 nos The pedestal pitch center dia is

66 1±0.5 cm. TWIN WHEEL CASTORS The twin wheel castors are injection

moulded in black Nylon ith 5 nos twn wheel castors NECKREST The Neckrest

assembly consist of polypropylene pad with moulded Qolyurethane foam and

covered with polyester fabric Neckrest is fixed to Back Assembly through

Neckres Connector Neckrest assembly has height adjustment of4.2 ± 0.5 cm

and rotation adjustment of overall762 Th 2 The completa neckrest assembly is

retro fit to the main chair. The rate shall include all matenals, hardware, and

labour etc complete as per instruction of engineer-in charge

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

Rupees Four Hundred Eighty

following type, erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules erected on /

Pt. 485.81 Five And Paise Eighty One

in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete. Cat.III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and

Rupees Six Hundred Seventy

accessories with earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

Pt. 674.68 Four And Paise Sixty Eight

textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat.III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with Rupees Seven Hundred Forty

120 1-2-3. 10.00 appropriate front plate modules erected on / in wall / ceiling as per pipe Pt. 745.38 Five And Paise Thirty Eight

erected with following type of accessories. [II] For 16A Plug and 16 amp switch Only

with 2-2.5 sq.mm Cu. Wire from mcb db board. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete. Cat.III

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm Rupees Eight Hundred

121 1-2-3. 5.00 ( green) earthing wire from mcb d b board.(f) with medium class Rigid PVC Pt. 871.63 Seventy One And Paise Sixty

pipe and accessories erected concealed in wall/ceiling complete Three Only

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

Rupees Two Hundred Fifty

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in

Pt. 257.55 Seven And Paise Fifty Five

wall / ceiling with following type accessories. Cat.III

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic front Rupees Twenty Five And

plate , modules erected with necessary connection. As desired by Engineer In

Paise Twenty Five Only

charge (7) Blank Plate Single . Cat.III

(9) 16 Amp. SP one way switch. Cat.III Rupees One Hundred Eighty

And Paise Seventy Nine Only

(10) 6/16Amp. Universal socket. Cat.III Rupees One Hundred Ninety

125 1-2-6. 45.00 Ea 199.98 Nine And Paise Ninety Eight

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

Rupees Twenty Four And

126 1-3-2. 510.00 fittings & Junction boxes fixed with adhesive solution & Clamps with following Mtr. 24.24

Paise Twenty Four Only

dia of pipes, in approved manner as directed.(a) 20 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

Rupees Sixty Two And Paise

127 1-4-1. 980.00 erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper Mtrs. 62.62

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (E) in existing pipe (B) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling with

Rupees Eighty Six And Paise

128 1-4-2. 150.00 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour Mtr. 86.86

Eighty Six Only

for earth continuity of following size (E) in existing pipe (a) 2 wire 4 sq. mm

(E) in existing pipe (b) 2 wire 6 sq. mm Rupees One Hundred Twenty

One And Paise Twenty Only

(E) in existing pipe (i) 4 wire 10 sq. mm Rupees Three Hundred Ninety

130 1-4-2. 100.00 (use earth wire of 4 sq.mm ) Mtr. 398.95 Eight And Paise Ninety Five

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv

Rupees Forty Six And Paise

131 1-4-5. 50.00 grade ISI marked copper wires of following size to be erected as directed.e) Mtr. 46.46

1.50 Sq.mm 3 core round PVC sheathed.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

Rupees One Thousand One

textured/metallic /white front plate,modules erected with necessary

connections as directed

Ea 1133.22 Hundred Thirty Three And

1 no. 6A/16A universal plug-switch combined.

Paise Twenty Two Only

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories. Cat.III

Supply of Fibreglass Step (A Type)Ladder-8 FT having following specifications :

It should have nonconductive Structural moulded top, with Slots to keep tools

close at hand, inside Spreader Braces, Aluminium Feet with thick rubber tread,

Rupees Eighteen Thousand

nonconductive Full channel Fibreglass and two pairs of gusset support at the

bottom step. All gussets are heavy duty steel.

18191.11 One Hundred Ninety One And

Capacity : 300 lbs. Step Size : 3”

Paise Eleven Only

Width : 26” Approx. Spread : 54” Approx. Wt. : 15 Kg Approx. Cube :

Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

Rupees One Hundred Twelve

134 2.15.2 20.00 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp Ea. 112.11

And Paise Eleven Only

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP

holder . (ii) 5 to 8 watts . Cat.III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%,

Rupees Three Hundred

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80

Ea. 373.70 Seventy Three And Paise

Certificates)(NOTE: Below description have shown ranges of Wattage capacity Seventy Only

of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.) (A) Tube Light with integral driver (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat.III

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Rupees Three Thousand

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

136 2.16.2 11.00 >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

Ea. 3345.12 Three Hundred Forty Five

fittings required LM-79 & LM-80 certificates)(NOTE: Below description have And Paise Twelve Only

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection. (i) above 36 to 48 watts Cat.III

providing and erecting Miniature circuit breaker single pole 0.5A to 2A system

Rupees Two Hundred Seventy

137 3-10-1.(A) 11.00 and having breaking capacity 10 KA to be erected in existing box. confirming to 270.68

IS 8828/1996 with ISI Mark Cat.III

And Paise Sixty Eight Only

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be Rupees One Hundred Twelve

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

And Paise Eleven Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load

Rupees Three Hundred Thirty

139 3-10-2. 14.00 (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing Ea. 330.27

box having following capacity (B) 40 Amp.. Cat,III

And Paise Twenty Seven Only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Rupees Seven Hundred Thirty

140 3-10-5. 2.00 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Ea. 737.30

having following capacity (c)63 Amp. CAT-III

Seven And Paise Thirty Only

Plastic enclosure fitted with DIN rail suitable for incorporating One / Two Ea.. Rupees Fifty Two And Paise

Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four Rupees One Hundred Eight

And Paise Seven Only

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Rupees One Thousand Four

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

Ea. 1492.78 Hundred Ninety Two And

Paise Seventy Eight Only

suitable for (A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv) 12 way

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

(B) three phase incoming and single phase horizontal type outgoing Per phase Rupees Two Thousand Nine

144 3-11-5. 1.00 isolation type (PPI) (b) sheet steel double door (L) Three phase 6 way SS Ea. 2913.85 Hundred Thirteen And Paise

Double door for single phase outgoing horizontal box Eighty Five Only

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for

Rupees Two Thousand Two

operation on single phase 240 V. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic

Ea. 2235.13 Hundred Thirty Five And

Paise Thirteen Only

component. for following Max. rating erected as directed (ii) 40Amps. DP CAT

Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic Rupees Three Thousand Forty

of quick action & tripping with all advance feature & do not incorporate any

And Paise Ten Only

electronic component for following Max. rating erected as directed. (iii)

Amps. FP CAt.III

Providing and erecting Annealed bare Copper wire 8 to 16 SWG. Rupees Seven Hundred Ninety

147 3-14-4. 60.00 Kg. 794.87 Four And Paise Eighty Seven

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Rupees Five Thousand Seven

148 3-14-9. 2.00 Incharge has to ensure the value of earthing resistane mentioned in test Ea. 5760.03 Hundred Sixty And Paise

Certificate) & having back filling compound of (B) Inner chemical (CCM Three Only

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency. (b)For Electrical

installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or Rupees Two Hundred Twenty

in existing trench / pipe of following size of cables (B) 3 1/2 core 35 Sq. mm (

And Paise Eighteen Only

16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Rupees One Hundred Twenty

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables (B) 4 core 6 Sq. mm

Mtr. 126.25 Six And Paise Twenty Five

Making trench in soft soil of suitable width of 90 cms deep for laying cable or

Rupees Fifty Five And Paise

151 4-5-1. 200.00 locating the fault all over the run and backfilling the same and making the Mtr. 55.55

Fifty Five Only

surface as normal ground.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting

Rupees Sixty Two And Paise

152 4-5-8. 100.00 accessories of same material at required depth in existing trench for laying of Mtr. 62.62

cable. below ground / road surface for enclosing cable (A)50 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

Rupees Thirty Eight And Paise

153 4-6-1. 15.00 for PVC insulated armoured cable complete with out going tails, insulating tape Ea. 38.38

Thirty Eight Only

etc for following size of cables. (B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with Rupees Seventy Five And

out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core

Paise Seventy Five Only

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

Ea. 6.06 Rupees Six And Paise Six Only

manner. (A) 1.5/ 2.5/4/6 Sq.mm

(D) 35/50 Sq.mm. Rupees Twenty And Paise

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm Rupees One Thousand Nine

157 5-1-6. 35.00 sweep complete having 3blades with aluminium blades with , canopy & 30 Ea. 1948.29 Hundred Forty Eight And

cms. down rod erected with 24/ 0.2, 3 core flexible wire with earthing.(Make Paise Twenty Nine Only

shall be approved by Engineer in charge)

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

Rupees One Hundred Eight

158 5-2-1. 14.00 down rod erected duly painted for fan complete with necessary 24/ O.20, 3 Mtr. 108.07

And Paise Seven Only

core flexible wire with earthing.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. Rupees One Hundred Eight

box / Heavy Duty PVC box complete erected concealed in Ceiling with

And Paise Seven Only

necessary finishing.

Providing & erecting fresh air fan 250 mm dia with square frame make of ABS Rupees One Thousand Five

160 5.3.2 10.00 body with louvers Cat.II Ea. 1559.44 Hundred Fifty Nine And Paise

Forty Four Only

Supplying & erecting approved make SMC press moulded composite FRP.

loop-in, loop-out approx. 2mm thick box complete with bakelite connector strip

4way & hinged doors having locking arrangements with mounting clamp with Rupees Eight Hundred Ninety

nuts, bolts & washers suitable for erection on pole with cable clamps& earth

Eight And Paise Ninety Only

bolt of following size of box. (b) (A) 300mm x 200mm x 100mm [deep]

Supplying and erecting Street light pole bracket comprising main B Class GI

pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and bolts for fixing Rupees Four Hundred Ninety

162 6-5-4-B 11.00 the brackets and having spread of 0.5 mtr. Length with 110 deg.with Ea. 491.87 One And Paise Eighty Seven

vertical plane and suitable welded stiffener reducer and nipple with Only

check nut complete painted with one coat.of Red oxide / PU base primer

and two coats of Aluminium / PU paint. paint with following nos of

arms. [A] Single Arm bracket 0.5 Mtr

Supplying & erecting approved make IP 55 grade Company fabricated Timer

Panel of following capacity for switch On-Off street lights on time scheduling

basis made from 16G CRCA sheet duly epoxy power painted inside and outside

Rupees Thirteen Thousand

with hinged doors and locking arrangement consisting of suitable size of 4 Pole

MCB and 4 pole contactor (cat-III)with analog time switch, auto manual switch

Ea. 13350.18 Three Hundred Fifty And

of same make and suitable input and output Bakelite terminals and with door

Paise Eighteen Only

earthing approved by Engineer in charge. (B) 40 Amp

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water cooler should be Rupees Fifty Five Thousand

164 8.13.2 1.00 comprising of hermetically sealed compressor, fan motor, condensing unit, Ea. 55893.40 Eight Hundred Ninety Three

water tank surrounded by evaporating, coil, thermostats, relay etc.complete And Paise Forty Only

with necessary inlet & outlet connection. The body of water cooler will be made

from Stainless Steel.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Supplying & erecting 5 stage single reverse osmosis water purification system

with M.S. powder coated frame, prefilter housing with 'O' ring presediment

Rupees Fifteen Thousand Six

filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention

with 40 psi inline type post carbon filter auto low & high pressure switches

Ea. 15620.66 Hundred Twenty And Paise

with following size of storage tank & LPH capacity & erected as directed [B]

Ltr / Hr with 30 Ltr. Storage Tank

Supplying and erecting Direct On-line Electronics Starter with 2-5/4-10/8-

14/10-16 Amp. Rating relay (variable current setting) directly operated in

totally insulated elegant enclosure and 18 Amp. Rating power relay with start -

stop button for single phase operation up to 3 HP as per complete erected on Rupees One Thousand Six

166 9-1-2. 2.00 P.W. Block with following features. Ea. 1603.88 Hundred Three And Paise

Low voltage cut off below 140 V Eighty Eight Only

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping. [Cat.II]

Providing & erecting open well type horizontal mono block pump set with

Rupees Nine Thousand Six

stainless steel body having following specification (B) 1 H.P. single phase

open well motor pump set suitable for 185 LPM discharge @ 25 mtr. head,

Ea. 9613.18 Hundred Thirteen And Paise

suitable for 32 mm dia. Delivery pipe with control panel.Cat. II

S.I.T.C. of single phase submersible pump set suitable for 100 mm size or more

dia bore well having motor capacity and discharge as under with necessary Rupees Eighteen Thousand

168 9-6-1. 1.00 panel box. Lifting and Lowering taken extra. (c) Motor rating 2 HP (17 stage) Ea. 18386.04 Three Hundred Eighty Six And

pump having capacity of 106 LPM at 40 mtr head suitable for 32 mm dia. Paise Four Only

delivery pipe Cat.II

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Rupees One Hundred Four

169 9-7-1. 150.00 Submersible copper cable approved make of following Size. (b) 3 Core x 2.5 Mtr. 104.03

And Paise Three Only

Lowering of submersible motor pump set at the depth of following ,complete

with required. Nos. and size of casing pipes erected by means of proper chain Rupees One Thousand Seven

170 9.6.18 1.00 pulley block & pipe wrenches after checking of threads of each pipe with Per Job 1711.95 Hundred Eleven And Paise

coupling to take the load of the pump set and pipe assembly filled up with Ninety Five Only

water (A) Up to 60 mtrs.

(d) For Open well Horizontal submersible pump set for sump well (i) 1 HP to

Rupees Eight Hundred Fifty

Six And Paise Forty Eight Only

Providing Water proof straight Joint in PVC insulated flat flexible copper cable Rupees One Hundred Eighty

172 9.7.2 1.00 by using insulating material, water proofing material, & making the joint Ea. 189.88 Nine And Paise Eighty Eight

complete. (A) Up to 10Sq. mm Only

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Supplying of following size of HEAVY UPVC column pipe with coupler and wire Rupees Two Hundred Fifty

173 9-7-19 60.00 lock[A] 40 mm dia RMT. 257.55 Seven And Paise Fifty Five

Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI)

long, pump guard set, starter pipe Rubber ring for submersible pump & UPVC Rupees Five Hundred

column pipe as directed by Engineer - in - charge with necessary plumbing as

Per Set. 514.09

Fourteen And Paise Nine Only

desired.[C] 40 mm dia

Total Cost of Rs. One Crore Fifty two Lakhs Thirty Nine Thousand Three Hundred Fourty Six Only

I/we am/are willing to carry out the work at………………………………………………….% above/below percent (should be written in figures and words) of the estimated rates mentioned above.

Amount of my/our tender works out as under :

Estimated amount put to tender Rs.

Add / deduct…………….% above / below Rs.

In words (Rupees……………………………….. Rs.

Note -1 All works shall be carried out as per Public Work Department Handbook and other specification of Division or as directed.

Note -2 All the columns in Schedules should be filled in ink and the total of the entries ink last column should be struck by the contractor under his signature.

Rates quoted include clearance of site ( prior commencement of work and at its close ). In all respect and hold good for work under all condition, site, moisture, weather etc.

Serviceable material available ( if any ) after Demolishing / Dismentalling any item should be hand over to the concerned PIU Site Engineer In Charge as per instruction of

engineer in charge.

Note -5 Contract will have to quote his G.S.T. Registration number while submitting his tender.

Note -6 Recovery of G.S.T. At. 2 % of value of work done shall be made from contractor bills.

ITEM RATES + 1 %

NBO NO. QUANTITY ITEM DESCRIPTION PER Rate In Words AMOUNT

Signature of Contractor with Seal Signature of Contracting Authority with Seal