Building Work

Construction of New central office Building (Bahumali Bhavan) at Junathana Campus, Dist. Navsari

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Excavation for foundation upto 1.5 m depth including 6896.00 Cumt 120.01

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

2 Excavation for foundation for depth from 1.5 m to 5561.00 Cumt 166.35

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(B) Dense or Hard soil

3 Excavation for foundation from depth 3.00 m to 5.00 7086.00 Cumt 178.58

m including sorting out and stacking of the useful

materials and disposing off the excavated stuff up to

all lead. (A) Dense or Hard soil

4 Excavation for foundation more than depth 5.00 m 4744.00 Cumt 200.22

including sorting out and stacking of the useful

materials and disposing off the excavated stuff up to

all lead. (A) Dense or Hard soil

5 Filling in foundation and plinth with sand in layers of 635.00 Cumt 471.69

20 cm. Thickness including watering ramming and

consolidating etc. comp.

6 Filling available excavated Earth (Excluding Rock) in 7751.00 Cumt 133.65

trench plinth side of foundation . in layer not

excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc.

7 Disposing available excavated earth stuff to other 11018.00 Cumt 249.82

location or as per instruction of directed engineer in

charge. Up to 10 Km lead

8 Filling foundation and plinth with murrum or 1225.90 Cumt 296.29

selected soil in layer of 20 cm in thickness including

ramming watering and consolidating etc. complete

Item Description of Item Quantity Unit Rate In Amount

9 Anti Termite System 3563.00 Sqmt 134.33

P/L of Permenent piping technology Anti Termite

treatment before flooring work by installing LLDP

(Low linear density Polyethylene) tube of 8 mm

O.D.& 6.4 mm I.D.With in Built Pressure

Compenstaion chif every 30 cm interval in the tube,

having working pressure of 2 kg/cm 2 and realese

rate of 1.9 ltr/Hour fixed by P-Clip and nails . The

LLDP pipe shall be installed at the entire periphery of

the building and at internal network of building

depth of 20 to 200 mm under floor every 2 to

mtr.c/c distance (adjustble as per building layout ) &

Ends of loop pass through a PVC Elbow of minmum

32 mm ID at junction box of wall and floor level,

entring into a steel reinforcmed grooved flexible pipe

mini.22 mm LD leading into junction box and during

injecting chemicls for termite control tretment. The

anti-termite chemical Lmidcloprid 30.5% SC Mix as

per IS 6313(part-III) shall be injected by the pressure

pump diluted with water @ 10.5 ml/5ltr of water at

the rate of 2 kg/sq,cm.@ 5 ltr /Smt .the contractor

shall submit approved line plan for piping system

and junction boxes dully approved By Engineer -in-

charge with bond of 5 Years warnty .

10 Providing and laying in position Ready Mixed M-150 1748.00 Cumt 4252.40

grade concrete for reinforced cement concrete work

in Foundations & Plinth, using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) For All Floor Level

Item Description of Item Quantity Unit Rate In Amount

11 Providing and laying in position Ready Mixed M-200 579.00 Cumt 5926.28

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) For Plinth slab and

all R.C.C. memebers at all floor level

12 Providing and laying in position Ready Mixed M-250 4330.25 Cumt 5216.65

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for Footing For All

Item Description of Item Quantity Unit Rate In Amount

13 Providing and laying in position Ready Mixed M-250 681.40 Cumt 7600.25

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for Column For All

14 Providing and laying cement concrete 1:3:6 (1- 123.75 Cumt 3080.90

Cement : 3- coarse sand : 6- machine cut stone

aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

15 Providing and laying in position Ready Mixed M-250 412.40 Cumt 6263.01

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for Plinth/Ground

Item Description of Item Quantity Unit Rate In Amount

16 Providing and laying in position Ready Mixed M-250 2049.00 Cumt 6611.46

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for Beam For All

17 Providing and laying in position Ready Mixed M-250 185.50 Cumt 6768.01

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for Chhajja For All

Item Description of Item Quantity Unit Rate In Amount

18 Providing and laying in position Ready Mixed M-250 83.00 Cumt 7900.22

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for Lintal For All

19 Providing and laying in position Ready Mixed M-250 2285.00 Cumt 7366.94

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for Slab For All

Item Description of Item Quantity Unit Rate In Amount

20 Providing and laying in position Ready Mixed M-250 108.00 Cumt 6739.73

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for Stair For All

21 Providing and laying in position Ready Mixed M-250 462.00 Cumt 7270.99

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for RCC Wall For

Item Description of Item Quantity Unit Rate In Amount

22 Providing and laying in position Ready Mixed M-250 46.08 Cumt 6811.44

grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

concrete work including pumping of R.M.C. from

transit mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures in

recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) for Coping For All

23 Providing and fixing stainless steel railing made from 152.00 Sqmt 3973.34

anticorrosive SS 304 grade pipes, consisting of

mm dia (16 gauge) handrail and 38 mm dia (16

gauge) SS 304 grade balusters placed at 1.20 m

centre-to-centre, firmly fixed into the RCC slab. The

railing shall include horizontal SS pipes of 25 mm dia

(16 gauge) spaced at 0.20 m centre-to-centre, fixed

using 18.75 mm dia (16 gauge) SS pipe connectors

with the balusters. The entire assembly shall be

provided with all necessary brackets, base plates,

welding, grinding, buffing, and mirror polishing,

complete with all accessories as per the approved

detailed drawings and as directed by the Engineer-in-

Charge. The rate shall be inclusive of all materials,

labour, fittings, fixing in position, finishing, cutting,

wastage, scaffolding, loading, unloading, and

transportation to site — complete in all respects.

24 Providing and fixing Stainless steel Hand railing 231.00 Rmt 1654.38

made from anticorrocive 304 grade S S pipe of

mm dia (16Gauge) as hand rail with S S 304 grade

Baluster including hook and necessary Fixture and

Fitting tools as per directed engineer in-charge

25 Providing IS Mark TMT FE 550D bar reinforcement 1340740.00 Kg 97.26

for RCC work including bending & placing in position

complete up to All floor Level

26 Extra for concreting in grade M350 instead of M250 3932.00 Cumt 273.57

including cost of cement, labour etc. complete.

27 Extra for concreting in grade M300 instead of M250 222.00 Cumt 182.38

including cost of cement, labour etc. complete.

Item Description of Item Quantity Unit Rate In Amount

28 Providing and fixing eco-friendly light weight 4756.00 Sqmt 1674.15

calcium silicate false ceiling tiles having Tegular edge

& 15 mm Thick Densified edges on the Tile Periphery

for Extra Strength The Light weight calcium silicate

ceiling tiles shall have, light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal

Insulation. The Light weight calcium Silicate tile shall

be of approved texture Fine fissured/ Spintone/

Cosmos having NRC value of 0.5 & Globe having NRC

value of 0.75 NRC or equivalent of size 595 X 595 mm

to be laid on true horizontal level suspended inter

locking metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably

spaced at joints to get required length and size of

X 38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24 X

28mm made out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main 'T' at 600mm

centre to centre to form agrid of 1200x600mm and

size 24x48mm made of 0.30mm thick (Minimum)

sheet to be interlocked at middle of the

1200x600mm panel to form grid of size 600x600mm

resting on periphery walls/partitions on a perimeter

wall angle pre-coated steel of size (24x24x3000mm

made of 0.40mm thick (minimum) sheet with the

help of rawl plugs at 450mm centre to centre with

29 Brick work using common burnt clay building bricks 167.00 Cumt 4121.55

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional below

30 Brick work using common burnt clay building bricks 2486.19 Cumt 4492.38

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand) (B) Conventional All Floor

31 Half Brick masonry in common brunt clay building 1056.00 Sqmt 682.56

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (B)

Conventional in super structure. for All Floor

32 Providing and fixing chicken mesh jali with square of 433.00 Sqmt 233.92

25 gauge at junction the masonary and RCC member

including necessary scafolding, labour etc.complete

for all floors.

Item Description of Item Quantity Unit Rate In Amount

33 Providing 20 mm thick double coat mala cement 18145.51 Sqmt 346.19

plaster with grooves on interior brick / concrete

work for plastering comprising of base coat of 12 mm

thick cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc.

complete For All Floor

34 Providing 10 mm. Thick cement plaster in Double 16862.77 Sqmt 245.79

coat for plastering on ceiling and soffits of stairs and

finished even and smooth in : (I) Cement mortar 1:4

(1 cement : 4 sand) including Mala troveled finish

etc. complete.Ground Floor

35 20 mm thick Sand faced cement plaster gutka finish 7989.00 Sqmt 465.15

with grooves as suggested by this office consisting of

12 mm thick backing coat of C.M. 1:3 ( 1 cement :

coarse sand ) and 8 mm thick finishing coat of C.M.

1:1 ( 1 cement : 1 coarse sand) for all heights as

directed etc. complete. and as per pattern sample

aprroved by the architect or directed engineer in-

36 20 mm thick mala + NATURAL STONE STAMPING 701.17 Sqmt 984.07

PLASTER texture

Providing and applying 20 mm thick double coat

mala cement plaster with Natural Stone Finish Stone

Stamping Texture including grooves on external

brickwork or concrete surfaces, consisting of a base

coat 12 mm thick in cement mortar (1:4) finished

rough to form a key, followed by a top coat 8 mm

thick in cement mortar (1:2). While the top coat is in

green condition, the surface shall be impressed with

approved stone stamping moulds or pattern rollers

to achieve a natural stone texture with defined

grooves and block appearance as per approved

design, shade, and pattern. The stamped and grooved

surface shall be finished with trowel and texture

tools and treated with approved colour oxide,

surface hardener, and protective sealant coating for a

durable, weather-resistant, and aesthetic finish. The

work includes all materials, labour, scaffolding,

curing, cleaning, finishing, and equipment complete

as per approved sample and as directed by the

Engineer-in-Charge.

37 Providing throating or plaster drip and moulding to 1411.00 Rmt 43.22

R.C.C. Chhajja.

38 Applying two coats of Birla or Asian acrylic lapy 34338.00 Sqmt 40.59

(putty) & two coats of primer of approved brand and

manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and

sand papered smooth.

Item Description of Item Quantity Unit Rate In Amount

39 Wall painting (two coats) with plastic emulsion paint 17430.00 Sqmt 81.05

of approved brand and manufacture on undecorated

wall surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

40 Wall painting (two coats) with plastic emulsion paint 16908.00 Sqmt 86.60

of approved brand and manufacture on undecorated

ceiling surface to give an even shade including

throughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

41 Wall Painting (Two coats) with weather proof 100 % 1259.00 Sqmt 117.40

acraylic emulsion (Apex or equivalent type) paint of

approved brand and manufacture and of required

shade on exterior wall surface to give an even shade

over and including primery coat with Alkaly

resistance primer of approved brand after

thoroughly brushing surface to remove all dust and

remains of loose powdered material etc. copm. for all

42 Masonary work using Aerated light weight concrete 160.00 Cumt 4597.84

block having crushing strength not less than

kg/sqcm for super structure above plinth level upto

floor two level in cement mortar 1:5 ( 1 cement :

fine sand ) complete as per Technical Specification

43 Providing and fixing GI louvers as shown in 66.00 Sqmt 2402.89

elevation, using 114 mm wide G.I. sheet of 0.55 mm

thickness having weight not less than 490 gm per

running meter, roll formed to obtain 84 mm wide

louvers, snap fixed on specially shaped G.I. channels.

The GI channels shall have a weight not less than

3.06 kg per running meter. The louvers and channels

shall be factory finished with minimum 55 micron

thick powder coating of approved colour and make.

The work includes providing, fabricating, fixing,

necessary fasteners, supports, cutting, fitting, and all

complete as per drawings and as directed by

Engineer-in-charge, including provision of openable

Mechanisum etc. completed as per directed engineer

44 Providing and fixing extruded aluminum window 540.00 Sqmt 2140.33

having extruded aluminum Colour Powder Coated

section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @ Wt.

1.205 Kg/mt,vertical member of size 122.20mm x

31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,vertical member of size

with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

Item Description of Item Quantity Unit Rate In Amount

45 Providing and fixing window having extruded 5.00 Sqmt 1591.87

aluminum Colour Powder Coated section frame main

outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt, horizontal Three track member size 92mm x

31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical

member of size 92mm x 31.75mm x 1.50mm ,@ Wt.

1.06 Kg/mt with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as

per details etc

46 Providing and fixing window having extruded 517.00 Sqmt 3386.53

aluminum Colour Powder Coated section frame main

outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt, horizontal Two track member size 92mm x

31.75mm x 1.30mm @ Wt.1.07 Kg/mt, vertical

member of size 92mm x 31.75mm x 1.50mm ,@ Wt.

1.06 Kg/mt with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm @ wt.of

Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as

per details etc

47 Providing and fixing window having extruded 23.00 Sqmt 1705.67

aluminum Colour Powder Coated section frame main

outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /

Rmt, horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x 1.30 mm @

wt.of 0.0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @

wt.of 0.456Kg/mt, vertical member of size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt with 5 mm

thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures

transparent silicon sealant glass fixing to frame as

per details etc complete for window

48 Providing & Fixing in position standard extruded 35.00 Sqmt 2955.97

approved colour anodised Aluminum Ventilator with

outer frame 63.50 x 38.10 x 1.95 mm (Wt

kg/Rmt ) with 3mm thick Bajari figure adgesteble

tinted louvers glass fixed to alluminium strip blade

including fixtures, fastenning, labours and

equipments as per detailed drawing as directed. For

Item Description of Item Quantity Unit Rate In Amount

49 Providing and fixing double shutter specially 51.30 Sqmt 5376.23

designed hollow metal door comprising 35 x 100 mm

M.S. rectangular hollow section frame with 25 x

mm M.S. pipe horizontal stiffeners placed at equal

spacing throughout the height for rigidity and

stability. Both shutters shall be fabricated with

mm thick Marine Plywood, finished with approved

shade, pattern, and design of decorative laminate on

both sides, and edge beading neatly polished. The

door shall be fitted with durable floor spring

(minimum capacity 200 kg) and 60 cm long stainless

steel handles on both sides, including all fixtures,

fasteners, holdfasts, hinges, necessary hardware

fittings, polishing, finishing, labour, and materials,

complete as per architectural drawing and as

directed by the Engineer-in-Charge.

50 Providing and fixing 38 mm thick solid core type-I 549.00 Sqmt 5751.95

Single Flush door shuttered having factory made &

stamped I.S 12823 grade-I three layered resin

flushed door having decorative lamination on both

sides & 12 mm thick teak wood beading fixed

around the door including melamine polished at

edges , fixing by Zinc coated hinges for durable grip

including 15cm long stainless steel handle, Aldrop

stopper and necessary Locking system, S.S. fixtures

& fastenings etc. directed by engineer in charge. The

door from “NOVAPAN” OR Equivalent company

holding licence for minimum 5 years.

51 Providing and fixing FRP frame size 100 x 50 mm and 104.00 Sqmt 2362.39

35 mm thick FRP depress panel single or Double

shutter having extra reinforcement on sides & edges

in Gel coat finish.The core of the both shutter &

frame is to be filed up with injected fire retradat

grade polyurethene foam done in situ along with

embeded wooden pieces for stiffening & also taking

hinges & fintures.The whole FRP frame & single or

double shutter is to be waterproof, weatherproof

,termite proof & resistance to mild acid/alkali.Rates

are to be inclusive of S.S hinges with necessary

screws & alluminum fixtures & fastenings & fartener

sleeve.Colour and Shade approved by Engineer-In-

Item Description of Item Quantity Unit Rate In Amount

52 Providing and laying integral cement-based 2509.00 Sqmt 1568.03

waterproofing treatment on horizontal surface

below ground level for underground structures,

including surface preparation and complete system

as directed by the Engineer-in-charge, consisting of:

(i) first layer of 22–25 mm thick approved rough

Kota stone slab laid over 25 mm thick cement mortar

1:3 (1 cement : 3 coarse sand) mixed with

waterproofing compound conforming to IS:2645 in

recommended proportion over prepared leveling

course (paid separately), including sealing of joints

and grouting with cement slurry mixed with

waterproofing compound; (ii) second layer of 25 mm

thick cement mortar 1:3 mixed with waterproofing

compound; (iii) finishing the top with 10–12 mm

nominal size stone aggregate @ approx. 0.008 cum

per sqm, well spread and embedded in the second

layer, complete in all respects including curing, as

53 Providing and placing 0.6m x0.6m GVT matt finished 7420.00 Sqmt 1253.41

Vitrified Tile vitrified 8 mm thick tile flooring over

mm (average) base of cement mortar 1:6 ( 1 cement:

6 coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling

of existing flooring and jointed with color cement

slurry including finished with flush pointing &

cleaning the surface etc. complete in Two colour

pattern and 3mm groove including material cost as

per directed engineer incharge.(tack 10% DARK

54 Providing and placing 0.6m x0.6m GVT matt finished 347.00 Sqmt 1266.54

Vitrified 8 mm thick tile skirting over 12 mm

(average) base of cement mortar 1:3 ( 1 cement:

coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling

of existing flooring and jointed with color cement

slurry including finised with flush pointing &

cleaning the surface etc. complete in Two colour

pattern and 3mm groove including material cost as

per directed engineer incharge.(tack 10% DARK

55 Providing and laying Heavy Duty 10 to 12 mm thick 1280.00 Sqmt 1380.67

Parking Vitrified tiles flooring of PAVIT or

equivalent make in required pattern, shape & design,

laid on 50 mm. thick cement mortar 1:6 ( 1 cement :

6 coarse sand) make with spacer joint of approved

quality cement grout of the make Bal Gold Star,

cleaning, washing & etc. complete. For Basement.

56 P & L 60 x 45 cm Machine cut Machine Polished Blue 507.00 Sqmt 1010.92

Kota Stone slab flooring over 20 mm (average)thick

base of cement mortar 1:6 (1-cement 6-coarse sand)

or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over

and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing

and polishing etc.complete (A) 25mm thick

Item Description of Item Quantity Unit Rate In Amount

57 P & L 60 x 45 cm Machine cut Machine Polished Blue 256.00 Sqmt 1089.18

Kota Stone slab 30 mm thick in riser of steps,skirting

dedo and pillars laid on 10 mm thick cement mortar

1:3 (1-cement 3-coarse sand) and jointed with grey

cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing

etc.complete (A) 25mm thick

58 Providing and laying 600 mm x 600 mm Matt 557.50 Sqmt 1282.70

finished Antiskid Ceramic tiles in flooring, treads of

steps & landing on a bed of 12 mm thick cement

mortar 1:3 (1 cement : 3 coarse sand) finished with

epoxy and 3mm groove with flush pointing in white

cement and aproved colour, shade and size by

Architect or Engineer in charge for all floors.

59 Providing and laying coloured glazed tiles of the size 1043.00 Sqmt 1672.56

300 mm x 600 mm x 8 mm in skirting, risers of steps

and dedo on 10 mm. thick cement plaster 1:3 (1

cement : 3 coarse sand) & jointed with white cement

slurry as per directed engineer incharge.

60 Providing and laying machine-cut, free-edge, 523.00 Sqmt 3135.04

machine-polished full black granite stone (18 mm

thick) for finished treads and risers, including 1 cm

projected nosing with rounded moulding in treads,

laid over 12 mm average thick cement mortar 1:6 (1

cement : 6 coarse sand) for treads and 10 mm

average thick cement mortar 1:3 (1 cement : 3 coarse

sand) for risers; jointed with grey or coloured

cement slurry, including rubbing, polishing, and

making three grooves of size 3 mm × 3 mm along the

length of each tread, complete in all respects.

61 Providing and laying China mosaic type 1658.00 Sqmt 1107.97

waterproofing treatment on terrace including

cleaning the surface by wire brush as directed,

including applying neat cement slurry @

Kg/Sq.mtr. mixed with waterproofing compound

after cleaning the surface, laying cement concrete

using brickbats (size 25 mm to 100 mm, well

immersed in water before use) with 50% of cement

mortar 1:5 (1 cement : 5 coarse sand) mixed with

waterproofing compound over 20 mm thick layers of

cement mortar 1:5 (1 cement : 5 sand) to required

slope, including rounding of junctions of walls and

slabs and after two days of proper curing, applying

second coat of cement slurry, finishing the surface

with 20 mm thick cement mortar 1:4 and fixing China

mosaic tiles (broken glazed tiles of approved colour

and shade, laid in proper slope and pattern), finally

finishing the surface with white cement slurry, and

after finishing the whole terrace shall be flooded

with water for a period of two weeks for testing the

waterproofing efficiency, all work shall be carried

out as per the direction of the Engineer-in-Charge.

Item Description of Item Quantity Unit Rate In Amount

62 Providing and laying waterproofing treatment by 360.00 Sqmt 1002.03

conventional method including cleaning the slab

surface by wire brush as directed, including

providing first layer of cement mortar 1:4 of 40 mm

thickness mixed with waterproofing compound at

the rate prescribed by manufacturer, including

putting of brick bats (average thickness 40 mm, well

immersed in water and laid uniformly) on first layer

of mortar, including applying cement slurry @ rate of

0.08 bag/sqm on fixed layer of brick bats, including

maintaining necessary slope, in second layer 40 mm

thick cement mortar 1:4 mixed with waterproofing

compound as directed, including finishing smooth

with cement slurry as directed complete, all work

shall be carried out as per the direction of the

Engineer-in-Charge.

63 Providing Plinth Protection to Building including 398.00 Sqmt 2308.15

excavation in ordinary soil and laying cement

concrete 1:3:6 using stone aggregates of 40mm

nominal size in foundation layer 100 mm thick below

pre-cast Rubber Dye inter locking concrete block

60mm thick with grade of concrete M200 pneumatic

compressed by mechanically pressed and as per

approved design including 75mm Sand layer for

levelling and filling the joint with sand in proper line

and level etc. complete, Including Providing and

fixing pre-cast concrete kerb stone of grey cement

based concrete block 30cm length, 30cm height and

15cm thick of M250 grade concrete as per approved

design and including excavation for fixing in proper

line and level, filling the joint with C:M 1:3

(1cement:3 fine sand) etc. complete.

64 Providing and fixing mirror polished 16–18 mm thick 891.00 Sqmt 2733.06

Granite stone of approved quality in cladding on sill

and around doors/windows/ventilators, with

chamfered edge moulding and polished finishing on

exposed edges, fixed over 12 mm thick cement

mortar (1:3) and set with cement slurry and

adhesive, complete as directed by Engineer-in-

charge.etc. complete.

65 Providing and fixing safety grills of required pattern 27965.00 Kg 107.90

for windows/doors using 16 mm dia M.S. bars placed

horizontally at 100 mm c/c and Vertically at 250 mm

c/c 16 mm dia M.S. bars, fixed with necessary M.S.

flats / M.S. angle as required, including cutting,

welding, fabrication, grinding and finishing, complete

in all respect. The work includes one coat of

approved steel primer and two coats of synthetic

enamel paint of approved shade and make, as per

drawings and as directed by Engineer-in-charge.

66 Providing erecting and fixing double coated Syntex 20000.00 Liter 3.95

PVC. (ISI) water tank of required capacity each with

all necessary fittings and connection etc. complete on

Item Description of Item Quantity Unit Rate In Amount

67 Providing laying and jointing in true line and level 250.00 Rmt 195.67

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

68 Providing laying and jointing in true line and level 400.00 Rmt 148.12

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

69 Providing laying and jointing in true line and level 300.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

70 Providing laying and jointing in true line and level 650.00 Rmt 72.65

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

71 Providing, laying and jointing in true line and level 100.00 Rmt 834.38

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm diametre

x 210 mm length x 196 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost

of all materials.

Item Description of Item Quantity Unit Rate In Amount

72 Providing laying (to level or slopes) and jointing 957.00 Rmt 678.01

reinforced concrete Light duty non-pressure pipes

I.S. class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints

including testing of joints complete.(D)

73 Providing, laying and jointing in true line and level 610.00 Rmt 857.65

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diametre

x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost

of all materials.

74 Providing and fixing concealed center point to wall 50.00 Rmt 660.58

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete. [E] 50mm.

75 Providing and fixing concealed center point to wall 50.00 Rmt 447.72

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete. [F] 40mm.

76 Providing and fixing concealed center point to wall 150.00 Rmt 253.82

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete. [C] 25mm.

77 Providing and fixing concealed center point to wall 150.00 Rmt 170.36

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water

of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete. [A] 15mm.

Item Description of Item Quantity Unit Rate In Amount

78 Providing, laying and jointing in true line and level 90.00 Rmt 292.90

75 mm dia. UPVC SWRType B pipe conforming to IS

13592-1992 with one end plain and other end

socketed with rubbering and fitting conforming to ISI

14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of

PVC clamp at every 2000 mm c/c or shall be

conceled in walss as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

79 Providing and fixing in PVC SWR cowel went 75mm 6.00 No 15.66

dia to pipes.(B) 75mm dia.

80 Providing and fixing in PVC SWR cowel went 110mm 20.00 No 28.79

dia to pipes.(B) 110mm dia.

81 Providing and fixing PVC SWR Nahni trap IS 14735 90.00 No 585.37

for drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

82 Providing and fixing wash down water closet 42.00 No 2983.54

(European type W C pan) with integral P and S trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement five sand) including providing

and fixing plastic seat cover for wash down WC with

CP brass hinges and rubber buffers back plastic seat

and including providing and fixing PVC flushing tank

with a pair of C I or MS bracket with complete fitting

such as lead valve siphon 15 mm dia brass ball valve

with polythene float CP brass handle unions and

couplings for connection with inlet out let and over

flow pipes 40 mm dia porcelain enameled flush bend

including cutting holes in walls and making good the

same connection the flush bend with cistern and

closet vitreous china.

83 Providing and fixing brass screw down Angle Valve 126.00 No 555.50

15 mm dia of approved make, heavy duty, with

necessary brass fittings, PTMT washers, and

connections, fixed in position with all labour, tools,

and materials, tested for proper operation and water

tightness, complete as directed.

84 Providing and fixing PVC stop cock 40 mm dia, heavy 36.00 No 757.50

duty, suitable for water supply lines, including

necessary PVC fittings, solvent cement, Teflon tape,

and labour charges for proper fixing in position,

tested for water tightness and smooth operation,

complete as directed.

85 Providing and fixing ball cock of approved. quality as 6.00 No 189.84

directed.(A) Copper Metal (ii) 50mm dia.

Item Description of Item Quantity Unit Rate In Amount

86 Providing and fixing washbasin with single hole for 52.00 No 1619.87

pillar tap with C.I. or M.S. brackets painted white

including Rubber plug, sutting holes and making

good the same but excluding fittings and also

including rate of C.P. brass waste for washbasin or

sink (A) 32mm dia. and M.I. fisher union for

washbasin or sink. (A) 32mm dia.; (A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

87 Providing and fixing 600mm x 450mm bevelled edge 52.00 No 851.13

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

88 Providing and fixing C.P. brass towel rail comlete 32.00 No 616.42

with C.P. brass brackets fixed to wooden plugs with

C.P. brass scews (B) 600mm x 20mm size.

89 Providing and fixing screw down bib taps of 78.00 No 214.81

following size.(A) Brass screw down bib tap polished

bright. (i) 20mm dia.

90 Providing and fixing pillar tap, capstan head, screw 52.00 No 308.73

down high pressure with screws, shanks and back

nuts. (i) 15mm dia.

91 Providing and fixing in position 300 mm high, 150 150.00 No 308.73

mm wide English letters made from 1.0 mm thick

stainless steel sheet as directed by Engineer in

charge with all necessary tools & plants etc.

92 Providing and fixing Urinal of approved quality 48.00 No 1584.86

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

93 Providing and fixing chromium plated brass half trun 90.00 No 263.77

flush cock of approved quality including fixing in pipe

line etc. complete (ii) 25mm dia.

94 Providing and fixing S.W. gully trap with C.I. grating 8.00 No 1246.92

brick masonry chamber and water tight C.I. cover

with frame of 300mm x 300mm size (inside) with

standard weight (i) Square mouth traps (B) 150mm x

100mm size P or R type

95 Constructing brick masonry chamber for 40.00 No 2288.66

underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm

intenal dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete (i) Inside

dimensions 455mmx 610mm and 450mm deep for

single pipe line.

Item Description of Item Quantity Unit Rate In Amount

96 Constructing brick masonry chamber for 40.00 No 2495.71

underground C.I. Inspection C.I. Inspection chamber

and bends with briocks having croshing strength not

less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover

500mmx 700mm intenal dimensions with frame

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete (i) Inside dimensions

500mmx 700mm and 450mm deep for single pipe

97 Extra over items for every additional depth of 0.1M. 20.00 No 242.39

of part thereof beyond 450mm depth for Brick

masonry chamber.(i) for 455mm x 610mm size.

98 Extra over items for every additional depth of 0.1M. 20.00 Each 264.86

of part thereof beyond 450mm depth for Brick

masonry chamber.(i) for 500mm x 700mm size.

99 Providing cement vata (10cm x 10cm size) quarter 317.00 Rmt 24.28

round in cement mortar 1:1 including neat cement

finishing watering etc. Complete

100 Providing and fixing MS Ladder of required pattern 600.00 Kg 115.14

with MS flats(30x3mm) or round or square bars

(12mm) at required spacing & with round headed

bolts and nuts or screws or welding including primer

coat of approved quality and two coats of oil paintas

as directed by engineer in charge

101 Providing and fixing in position 150 mm high, 100.00 No 404.00

English letters made from 1.0 mm thick stainless

steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

102 Providing and fixing 16–18 mm thick machine-cut, 26.00 Sqmt 2400.77

mirror polished granite partitions of approved

colour and quality between urinals, with neatly

chamfered and moulded edges on all exposed faces.

The granite shall be fixed true to line and level using

cement slurry mixed with approved polymer-based

adhesive, over properly prepared surface. The work

includes cutting to required size, edge polishing,

providing necessary grooves/rebates if required,

backing support, and sealing joints with approved

non-staining epoxy/silicone sealant, complete. The

item also includes curing, protection, cleaning, and

finishing, all as per drawings and as directed by the

Engineer-in-charge.

Item Description of Item Quantity Unit Rate In Amount

103 Constructing kitchen Platform of 16mm to 18 mm 6.00 Sqmt 4192.51

thick Polished Granite at top and 25 mm thick Kota

stone slab one side polished at bottom with

cementing Materials / adhsives including makeing

necessary grooves in walls with Vertical sandwich

two Kotastone 25 mm support every 60 cm centre

to centre or as required including all labour material

of approved quality incl. full moulded round front

edge granite strip of one side polished and jointed

with grey cement slurry including rubbing and

polishing etc. complete for all floors

104 Providing and fixing 15 mm to 18 mm thick granite 32.00 Sqmt 3203.72

shelves of approved quality, fixed over an average

mm thick base of cement mortar 1:3 (1 cement :

coarse sand) along with approved adhesive. All

exposed edges shall be chamfered as directed by the

Engineer-in-charge. Work includes cutting to size,

fixing in proper alignment, jointing, curing, and

finishing complete. This includes cupboard shelves,

kitchen, bathroom, and storage units as required.

105 Providing and fixing aluminium anodized structural 23.00 Sqmt 8304.73

glazing work at any height with approved anodized

aluminium sections of size 101.60 mm × 57.00 mm ×

2.00 mm (Jindal Section No. 22713, wt.

Kg/Rmt), fixed with 53 mm × 2.00 mm pressure plate

(Jindal Section No. 22711, wt. 0.434 Kg/Rmt) and

mm × 1.30 mm cover plate (Jindal Section No.

wt. 0.343 Kg/Rmt), including necessary cleats,

brackets and fasteners. The glazing shall be with

mm thick heat-strengthened reflective glass panels,

fixed with structural silicone sealant (Dow Corning

Grade 995 and 789 GP) and backer rod/pressure

tape of appropriate size depending upon the joint

gap. The work shall also include provision of side-

hung openable window shutters within the system as

per drawing, fixing with high-quality expansion bolts

having adequate load-bearing capacity, including all

necessary fittings, fastenings, scaffolding, labour,

tools, equipment, and materials, complete in all

respects as per detailed drawings and as directed by

the Architect/Engineer-in-Charge.

106 Providing and fixing Kitchen sink with C.I. or M.S. 2.00 No 3640.04

brackets, painted white including cutting holes in

walls and making good the same but excluding

fittings. (C) Vitreous China Sink.(i) 600mm x 450mm

Item Description of Item Quantity Unit Rate In Amount

107 Providing and fixing kitchen platform trolley having 6.00 Sqmt 12442.19

three drawers of SS (IS 304) of required size like

thali, katleri, perforated, partition, cupsosar type in

kitchen platform having drawer front side and

backside by using 19mm thick all proof plywood of

ISI quality all side laminated etc. as directed. The size

of SS (IS 304) basket of size 4" to 18" for thali, dish,

katleri, perforated, partition, cupsosar type as

directed including necessary S.S. fittings, handles,

nobs, telescopic channels, etc. as directed

108 Providing and fixing 0.75 meter wide sand which 7.00 Sqmt 5850.93

type counter platform including supplying and fixing

granite stone of Z black or equivalant quality 18 mm

thick mirror polished on top and side posiition and

vertical strip at front with cement slurry & adhesive

including moulding of both exposed edges over

mm thick kotah stone platform fixing in top and

sides and itermediates supports fixing with cement

mortar and adhesive and finishing all material and

labour and assessories and 3 no flat back wash with

necessary fitting complete etc.

109 Steel work, welded in built up sections framed work 8288.00 Kg 91.06

including cutting, hoisting, fixing in position and

applying a priming coat of read lead paint & two coat

oil paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as

in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like.

110 Providing and Fixing 6 mm thick Lexan 72.00 Sqmt 1441.90

Polycarbonate multi wall roofing sheet fixed with

hilti screw and rubber silicon sealer and alluminium

strip of size 50 x 3 mm etc complete as directed by

Engineer in charge.

111 Extra for additional height of propping and centering 273.50 Sqmt 593.51

where the height of propping and centering exceeds

4 .O M between supporting floor to ceiling including

temporary brick or stone pillars for supporting as

required. (i)Height more than 6.0 M.and upto 7.0 M.

112 Providing and laying in position REBAR as specified 120.00 NO 209.07

in true line & level including drilling adequate hole,

cleaning the same, grouting with HILTI, HY - 200mm

rebar system as per manufacturers specifications

strictly in accordance with structural details having

minimum depth of embedment 125mm, etc complete

For all floors (a) 10 to 12 mm dia.

113 Providing and Fixing a set of wall mounted 38 mm 12.00 NO 2671.45

dia U shaped horizontal stainless steel collapsible

grab bar , 38mm vertical stainless steel fixed grab

rail of grade SS 304 from round pipe supported and

75 mm dia 8 mm thick SS 304 base flange on wall

including anchor fasteners, nuts, accessories as per

detailed drawing etc. complete as directed by

Architect or Engineer in charge.

Item Description of Item Quantity Unit Rate In Amount

114 Providing and fixing MS Z clamp on Wall or celling 675.00 No 85.85

for Pipe Fitting including all type necessary fittings

and accessory etc. completed as per directed

engineer in charge.

115 Providing and fixing coloured self adhesive PU- 200.00 Sqmt 4586.41

Tactile tile, ground surface indicators of

Polyurethane) of size 300mm x 300mm for

guiding/warning to the visually visitors in the

centre/side of the pedestrian/approach pathway as

per specification and guidelines complete in all

respect to the entire satisfaction of in charge.

116 Providing and placing braile indicator of size 170 48.00 No 820.12

mm x 35mm for handrails of the approved design

and make have braile dots raised 0.5 mm above base

plate to be installed at specific locations as per

direction of engineer in charge

117 Providing and fixing of conspectus tape 50mm width 90.00 Rmt 1247.35

on of treads in staircase including cutting pasting etc.

As per harmonised guidelines complete in all respect

to the entire satisfaction of engineer in charge.

118 Providing and Fixing 15 mm thick 300 mm x 300 mm 30.00 Sqmt 1205.94

Tactile Warning Tiles (Attention Tiles i.e. Tactile

Warning Surface Indicator {TWSI}) of Johnsan

Endura Tac Button Yellow Plus or equvqlent make in

flooring laid on 20 mm thick cement mortar 1:6 (1

cement : 6 coarse sand) on new surface and jointed

with cement slurry including finished with flush

pointing & cleaning the surface for all floors as per

detailed drawing etc. complete as directed by

Architect or Engineer in charge. Thse tiles shall be

Anti Skid, Chemical Resistant, Fade Proof, Frost -

Heat & Weather Proof, High Flexural Strength, Highly

Durable, Stain Resistance . All Tactile Warning Tiles

meet the specific size and dimension standards as

required by ISO/FDIS

Item Description of Item Quantity Unit Rate In Amount

119 Providing and fixing Expansion joint following items 314.50 Sqmt 8972.34

(a) expansion joint 100 mm thick expansion joint

board of best quality and approved make including

cutting to required size and shape at all levels . (b)

the expansion joint by 600 polymer or equivalent

confirm to BS 4254-1983 as per required shade and

manufactured specification by making groove of

mm x 12.5 mm lather by cutting or by repairing

groove and removing mortar drop or any other

foreign materials including applying primer and

filling required size (oversize of joint PU foam). (C)

Applying and providing Expansion joint sealing

System on 100 mm vide joint including cleaning of

exansion joint by mechanical means provision of

adhesive and flexible membrane with required bond

length as per menufracturer specification and 4mm

thick alluminium strip covering with one side sloted

and bolted with suitable system, inclusive of all

manpower, machinery and material as per

specification and as directed.(d)fixing 25 cm Wide &

3mm thick exterior composite panel on existing

expansion joint horizontally & vertically with all

material, hardware, acessories & fittings etc

completed.all items above a to b carry out as per

directed engineer incharge

120 Providing and Fixing Size: L 75mm x W 75mm x H 180.00 No 598.93

1200 ; 15 mm thick U shape corner Rubber Reflective

Guards with yellow reflective Patti fixing on

RCC/brick surface Including all fitting and material

charges & it shall be Chemical Resistant, Fade Proof,

Frost - Heat & Weather Proof, High Flexural Strength,

Highly Durable, Stain Resistance as per detailed

drawing etc. complete as directed by Architect or

Engineer in charge.

121 Providing and fixing Precast Fibre Reinforced 167.00 No 1007.98

Perforated Concrete Cover of size 600x450 mm and

75mm thick to be fixed on existing Brick

Masonary/RCC Trench with cement mortar 1:3

finished smooth with a floating coat of neat cement

122 Providing and fixing modular plastic (PVC/HDPE) 100.00 Rmt 1614.99

speed breaker on existing RCC road, made of high-

impact UV-stabilized material with anti-skid surface

and inbuilt reflectors, of approved size. Including

marking, drilling holes in RCC, and fixing with MS/SS

anchor bolts using epoxy/chemical grout for firm

anchorage. Ensuring proper alignment, interlocking,

and level of modules. Including making good the

surface after fixing. Finished with alternate yellow

and black stripes using road marking paint for

visibility, complete as per Indian Roads Congress

guidelines and Engineer-in-charge instructions

Item Description of Item Quantity Unit Rate In Amount

123 Providing and applying bituminous protective 1880.00 Sqmt 978.08

coating on RCC/CC surface of

underground/basement walls, using approved

quality cold-applied bitumen of grade conforming to

relevant standards, over properly prepared surface;

including cleaning, removal of dust, dirt and loose

particles, and ensuring dry surface condition;

applying one coat of bituminous primer followed by

two or more coats of bituminous coating to achieve

uniform, continuous, and impervious layer of

required thickness; including all labour, materials,

tools, and scaffolding, complete as per as directed by

the Engineer-in-charge.

124 Providing, supplying, installing, testing and 1.00 No 95950.00

commissioning of automatic electro-mechanical

boom barrier system of approved make, consisting of

powder-coated MS housing with IP54 protection,

heavy-duty motor (230V AC, 50Hz, single phase)

suitable for continuous operation, with aluminum

boom arm of 4.0 m to 6.0 m length and approx.

80–100 mm x 40–50 mm section, fitted with

reflective tape, LED indication and balancing spring

mechanism, having opening/closing time of 3–6

seconds, including manual override. The system shall

include microprocessor-based control panel,

minimum 2 nos. remote controls, push button

station, provision for RFID reader and loop detector,

IR photo sensors for anti-collision, vehicle presence

loop detector, emergency stop switch, boom safety

rubber strip, signal lamp/traffic light, boom support

stand (for boom length above 4 m), and all

accessories such as cable glands, connectors, junction

boxes etc., complete. The barrier shall be installed

over RCC foundation block of size 600mm x 600mm x

900mm depth, in M20 concrete (1:1.5:3) with

reinforcement of 10mm dia TMT bars @150mm c/c

both ways, including excavation, PCC 100mm thick

(M10), centering/shuttering, curing and backfilling,

and fixed with minimum 4 nos. M16 anchor bolts

embedded in concrete.

Item Description of Item Quantity Unit Rate In Amount

Providing and constructing RCC pedestal of size

300mm x 300mm x 600mm height above ground

level, finished with 12mm thick cement plaster (1:4)

and exterior paint, including base plate fixing,

alignment, leveling and non-shrink grouting. The

work includes electrical wiring using 2.5 sq.mm to

sq.mm FRLS copper wire in 25mm dia heavy-duty

PVC conduit, with trenching/road cutting and

restoration, junction boxes, earthing with GI pipe

earthing (40mm dia, 2.5m long), MCB/isolator, and

all connections from power source to barrier unit,

complete. The item also includes testing,

commissioning, trial run, programming and handing

over in complete working condition. Rate shall

include all materials, labour, T&P, transport,

installation and incidental charges, complete in all

respects as per specifications and instructions of

Engineer-in-Charge

125 Providing and laying cement concrete 1:2:4 (1- 25.00 Cumt 3713.67

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork in (A) Foundation and Plinth

126 Providing and fixing C.I. Manhole cover 0.60 M. x 1.00 Nos 958.17

0.45M. size having weight not less than 35Kg.

127 Providing & erecting open well horizontal mono 2.00 Nos 25856.00

block pump set with cast iron body, complete for

three phase submersible motor having [H]For 3 H.P,3

phase open well horizontal mono block pump set

suitable for 1400 LPM to 1025 LPM @ 33 to 42 MTR

head suitable for 65/80 mm dia delivery pipe

128 Providing and fixing rolling shutters of approved 6.00 Sqmt 3554.40

make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arragements for inside and

outside locking with push-pull operation including

the cost of hood cover and spring etc. complete.(A)

Shutters having width below 3.5 M

129 Drilling of min. 250 mm dia. bore hole in all strata 150.00 Rmt 1240.28

including dualover burden strata by combination

DR/DTH rig including lowering 200 mm dia MS ERW

pipes in bore hole and testing etc.all work as per

directed engineer incharge.

130 Supplying slotted PVC pipes of approved quality at 150.00 Rmt 555.50

site of work confirming to IS. 1239/1974 180mm dia.

131 Bore plug having 100 mm height made from M.S. 2.00 No 1161.62

plate with 3 holes at equal distance on circumference

for nut-bolts type, locking arrangement with nuts-

bolts & lock nuts of std. Make complete. For 250mm

Item Description of Item Quantity Unit Rate In Amount

132 Providing PVC insulated flat submersible cable as per 120.00 Rmt 180.79

detailed technical specifications of R/C of GWSSB

conforming to IS 694, IEC 60227 / 60228.d)1 R x 3 C

133 Suppling and installing 3 Phase Borewell 3.0 HP 2.00 No 37130.63

Submersible Pump Sets Electric motor driven

conforming to I.S. 8034 and motor conforms to IS-

9283 working at 3 phase 400/440 volt 50 C/S A.C.

supply & 2900 R.P.M. cat

134 Providing and fixing check or non return pully wheel 2.00 No 1111.00

valve of 50 mm diameter.

135 Manufacture, supply and delivery of following ISI 100.00 Rmt 152.51

marked HDPE pipes (IS:4984/1985 with latest

amendment) having material Grade PE-80 in

approximate 100 meter coil length or as per GWSSB

requirement with SS316 nipple at both ends having

11 TPI threads as per specifications, press fitted and

bolted having nominal diameter as under as per

detailed technical specifications.

136 Providing and fixing to wall ceiling and floor 10.0 Kg. 240.00 Rmt 339.05

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

137 Providing and fixing to wall ceiling and floor 10.0 Kg. 100.00 Rmt 696.90

F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(G)160 mm

138 Providing junction for rain water juncton chamber of 10.00 Nos. 9184.94

size 0.60x0.60x0.75m with excavation of size

1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete

including brick masonary wall in CM 1:6 of 0.75m

height & 0.23m thick with 15mm thick cement

plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab

of thickness 0.15m with CRS steel and 0.60mx0.45m

cast iron manhole cover with frame weight not less

than 35 kg as per directed by Engineer-in-charge

139 Providing and installation Recharge pit of 1.00 Nos. 109645.60

“RAIWOHA” Make 3 layer RCC Precast Injection well

system of size 1.5 meter Dia. X 3.4 Meter Height rein

forced concrete precast three layer module with 6”

dia x 12” dia. V wire screen of 0.75mm x 1.0 mm Slot

size in SS 304 material and 1.0 meter height with MS

Top cover and required Air vent including all

necessary excavation and transportation at site

including required filter media for the recharge

system as per site requirement. this item including

rate of 3 year of maintainance .

Item Description of Item Quantity Unit Rate In Amount

140 Constructing brick masonry chamber for 10.00 No. 7180.44

underground C.I. Inspection chamber and bends with

briocks having croshing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions, total weight of

cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm

and 450mm deep for pipe lines with three or more

141 Providing and laying (two level or slopes) and 40.00 Rmt. 508.42

jointing with stiff mixture of Cement Mortar in

proportion 1:1, Salt glazed stone ware pipes of pipes

150mm laying lime concrete 1:2:4 (1-Lime putty :2-

Fine samd : 4-Graded brick aggregates 40mm

nominal size) bedding for stoneware pipes of

following internal diameters with necessary

formwork and curing complete.

142 Construction of granular sub-base 150 mm thick by 36.00 Cum 696.90

providing coarse graded machine crushed B.T.

material satisfying MOST specification of grading I

(B.T. stone aggregate 53 mm to 26.5 mm 35 %,

to 4.75 mm - 45 % and 2.36 mm below - 20 %

)including spreading in uniform layer with motor

grader on prepared surface, mixing by mix in place

method with rotavator at OMC and compacting with

vibratory roller to achieve the desired density etc.

143 Providing and fixing of Ridge flashing for roof panel 240.00 Sqmt 867.39

shall be made out of 0.5 mm thick pre coated GI sheet

. The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per

IS:277:1992 , 5-7 microns epoxy primer on both side

of the sheet and polyester top coat 15-18 micron. The

PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel

members by pop rivet or self drilling/self stitching

fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete.

144 Providing and fixing pre-cast Rubber Dye / steel Dye 1683.00 Sqm 704.07

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming

to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

Item Description of Item Quantity Unit Rate In Amount

145 Providing and fixing pre-cast concrete kerb stone of 1050.00 Rmt 370.68

gray cement based concrete block 30cm ength,30cm

height and 15cm thick of M250 grade concret as per

approved design and including excavation for fixing

in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

146 Demolition including stacking of serviceable 519.00 Cum. 1084.29

materilas and disposal of unserviceable materials

with all lead and lift. (i) R.C.C. work

147 Box cutting the road surface to proper slope and 2426.00 Cum. 106.80

camber for making a base for road work including

removing the excavated stuff and depositing on the

road side slope as directed upto 50Mt.lead.

148 Construction of granular sub-base 150 mm thick 662.00 Cum. 828.20

layer by providing machine crushed B.T. material

satisfying MORT&H specification (Fifth revision) of

grading III including spreading in uniform layer with

motor grader on prepared surface, mixing by mix in

place method with rotavator at OMC and compacting

with vibratory roller to achieve the desired density

149 Providing and laying wet mix macadam base course 508.00 Cum. 972.63

250 mm thick in two layers as per MORTH

specification using machine crushed B.T. chips as per

required gradation, mixing with required optimum

quantity of water, conveying the mix to site of work,

spreading in to grade and camber with

paver/mechanical means and consolidation each

layer with vibratory roller to aschieve the desired

density including cost of material labour plant and

equipment etc. complete.

150 Compaction and finishing of cement concrete road 3383.00 Sqm 63.63

by trimix process providing extra Labour charges for

the trimix vacume dewatering service process on

cement concrete road sutface by using vacuum

dewatering pump floater surface vibrator including

making groves and rough finish to surface including

leveling etc complete.

151 Demolition of Brick work and stone masonry 70.00 Cumt 564.16

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

152 Constructing providing and fabricating cattle guard 14.00 Sqmt 5691.35

using channel section frame of size ISMC series

mm x 50 mm (Weight 9.20 kg/Rmt) and ISMC section

100 mm x 75mm (weight 11.50 kg/Rmt)

intermediate support for welding G.I.pipe at 12 Cm

C/C of size 50 mm in a frame made of Channel

section size 100 mm x 50 mm all round including

fixing the unit on prepared chamber of masonary

wall using MS hold fast embeded in masonary wall

top as directed by Engineer in charge and as per

drawing and necessary required arrangement etc

Item Description of Item Quantity Unit Rate In Amount

153 Providing and fixing decorative entrance gate made 1238.00 Kg 166.65

out of cast iron and various mild steel tabular section

combination , the Ornamental entrance gate should

be fixed at compound wall including pattern and die

making , cutting , welding , grinding, fabrication

fixing in position at compound wall with necessary

pedestal, bearing block and other locking

arrangement. The entrance gate should be painted

with two coats of priming coat of paint, and two coat

of oil paint etc complete. As per detail design and

instruction of architect.

154 Providing and fixing concertina coil fencing with 135.00 Rmt 516.11

punched tape concertina coil 600 mm dia 10 mt

openable length having 50 no rounds per 6 mt

length, upto 3mt height of wall with existing angle

iron (50mm x50mm x5mm )requird shaped As per

Directed Engeenier in charge. placed 2.4mt or 3.00mt

apart and with 4 horizontal R.B.T. reinforced barbed

wire(3 mm) , stud tied with G.I. staples and G.I. clips

to retain horizontal, including necessary bolts or

G.I.barbed wire tied to angle iron, all complete as per

direction of Engineer-in-charge, with reinforced

barbed tape (R.B.T.)/Spring core (2.5 mm thick) and

weight 43.478 gm/meter at compound wall for ESR

M4/ intakewell.

155 Supply, installation, testing & commissioning of ISI 1.00 No 101000.00

approved electrical motor driven jockey pump set

having 10.8 m3/hr. @ 70m head. The pump unit shall

be a horizontally direct mounted motor. Unit shall

comprise the following minimum requirements: a)

Pump, b) Electric motor IE2, c) Foundation bolts, d)

Mating flanges with gasket and fasteners, e)

Discharge gauges, etc. complete in all respect, with

156 Supply, installation, testing & commissioning of 1.00 No 35350.00

Priming tank, HDPE type, 1000 litres, with necessary

piping 100 mm size, G.I pipe for priming the pumps,

pipe of with butterfly valves for isolation, Water

Filling to priming tank by piping min. 50 mm size,

with all complete.

157 Supply, installation, testing & commissioning of 1.00 No 55635.60

Manifold (surge vessel) for fire hydrant system, min.

300 mm diameter, made from M.S plate, hydro tested

to 15 kg./cm2. with ball valves, header with

couplings for fitting pressure switches, pressure

gauges etc.with necessary isolation valves with all

Item Description of Item Quantity Unit Rate In Amount

158 Supply, fabrication & erection of aboveground G.I. 'C'- 1300.00 Mtr 505.00

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 25 mm dia.

159 Supply, fabrication & erection of aboveground G.I. 'C'- 1000.00 Mtr 858.50

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 50 mm dia.

160 Supply, fabrication & erection of aboveground G.I. 'C'- 800.00 Mtr 1313.00

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 80 mm dia.

Item Description of Item Quantity Unit Rate In Amount

161 Supply, fabrication & erection of aboveground G.I. 'C'- 600.00 Mtr 1919.00

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 100 mm dia.

162 Supply, fabrication & erection of aboveground G.I. 'C'- 200.00 Mtr 2828.00

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 150 mm dia.

163 Supply, fabrication & erection of aboveground G.I. 'C'- 13.00 Mtr 4040.00

Class, ERW piping, conforming to IS:1239, part-I,

Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as

per IS: 1239, part-II, Heavy class for size 150 mm dia.

& below & IS: 3589, for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support,

shall be two coat of zinc primer and two coats of fire

red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification

and direction of the Engineer-in-Charge, with all

complete. 200 mm dia.

Item Description of Item Quantity Unit Rate In Amount

164 Supply, installtion, testing & commissioing of 50.00 Mtr 2424.00

Underground GI (ERW) piping conforming to

IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm

dia. & above, min. 6.35mm thickness including Heavy

class fittings, anti-corrosive tape of size 150 mm

wide x 4 mm thick, wrapping & coating with 13KV

holiday testing . Rates shall include sand bedding of

75mm dia all around, backfilling of the excavated

including installation of heavy pipe fitting's, flanges,

etc. 10 % of all the welded joints shall be done

radiographically tested and 50% of the joints

radiographed shall be the "Field Joints". Hydrostatic

testing for 2 hours at 150% of the system pressure,

hook-up etc., complete with all accessories as per

approved drawings, specicification and direction of

the Engineer-in-Charge, with all complete. (Road

Crossing) 100 mm dia.

165 Supply, installtion, testing & commissioing of 50.00 Mtr 3131.00

Underground GI (ERW) piping conforming to

IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm

dia. & above, min. 6.35mm thickness including Heavy

class fittings, anti-corrosive tape of size 150 mm

wide x 4 mm thick, wrapping & coating with 13KV

holiday testing . Rates shall include sand bedding of

75mm dia all around, backfilling of the excavated

including installation of heavy pipe fitting's, flanges,

etc. 10 % of all the welded joints shall be done

radiographically tested and 50% of the joints

radiographed shall be the "Field Joints". Hydrostatic

testing for 2 hours at 150% of the system pressure,

hook-up etc., complete with all accessories as per

approved drawings, specicification and direction of

the Engineer-in-Charge, with all complete. (Road

Crossing) 150 mm dia.

166 Design, Supply and installation of Safety Signage 16000.00 Sq. inch 10.10

made of Zinc Sulphilde based glow in dark , Rigid

sheet with High Luminous property enclosed in a

transperent weather proof UV stabilized plastic

pasted on 3 mm thick clear acrylic sheet such as

EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING

FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE

EXIT, FIRE ALARM CALL POINT, FIRE HOSE REEL,

FIRE HYDRANT POINT etc.

167 Supply, Installtion, Testing & Commissioing of 450.00 No 556.36

Standard Response Sprinkler, Pendent Brass

Sprinkler, Quartzoid Bulb type with crome finish,

nickel crome platde, K factor K-80, Temp.- 68 C, 1/2"

end connection including resessed escutcheon. (UL

168 Supply, installation, testing & commissioning of 4.00 No 2824.58

pressure switch. (Range 0 to 16 kg/cm2)

Item Description of Item Quantity Unit Rate In Amount

169 Supply, installation, testing & commissioning of 150 12.00 No 2738.98

mm dia. dial Burdon Type Glycerine Filled pressure

gauge with isolation ball valve arrangements with

necessary isolation valves with all complete.( Range

170 Supply, installation, testing & commissioning of Cast 2.00 No 6060.00

iron body double flanged gate valve With Rising

Spinldle conf. to IS: 14846, PN-1.6 with mating

flanges, drilling as per IS/ANSI 150# with mating

flanges, galvanized nut, bolts & washers, gasket

mm thick, etc., with all complete. 50 mm dia.

171 Supply, installation, testing & commissioning of Cast 2.00 No 8332.50

iron body double flanged gate valve With Rising

Spinldle conf. to IS: 14846, PN-1.6 with mating

flanges, drilling as per IS/ANSI 150# with mating

flanges, galvanized nut, bolts & washers, gasket

mm thick, etc., with all complete. 80 mm dia.

172 Supply, installation, testing & commissioning of Cast 2.00 No 10605.00

iron body double flanged gate valve With Rising

Spinldle conf. to IS: 14846, PN-1.6 with mating

flanges, drilling as per IS/ANSI 150# with mating

flanges, galvanized nut, bolts & washers, gasket

mm thick, etc., with all complete. 100 mm dia.

173 Supply, installation, testing & commissioning of Cast 2.00 No 16160.00

iron body double flanged gate valve With Rising

Spinldle conf. to IS: 14846, PN-1.6 with mating

flanges, drilling as per IS/ANSI 150# with mating

flanges, galvanized nut, bolts & washers, gasket

mm thick, etc., with all complete. 150 mm dia.

174 Supply, Installation, Testing & Commissioning of 10.00 No 2045.25

Cast iron body Butterfly valve according to IS:

PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with

bolts & nuts washers, rubber gaskets 3 mm thick, etc.,

with all complete. 50 mm dia.

175 Supply, Installation, Testing & Commissioning of 8.00 No 2727.00

Cast iron body Butterfly valve according to IS:

PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with

bolts & nuts washers, rubber gaskets 3 mm thick, etc.,

with all complete. 80 mm dia.

176 Supply, Installation, Testing & Commissioning of 8.00 No 3232.00

Cast iron body Butterfly valve according to IS:

PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with

bolts & nuts washers, rubber gaskets 3 mm thick, etc.,

with all complete. 100 mm dia.

Item Description of Item Quantity Unit Rate In Amount

177 Supply, Installation, Testing & Commissioning of 6.00 No 4696.50

Cast iron body Butterfly valve according to IS:

PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated

complete with mating flanges /ANSI class # 150 with

bolts & nuts washers, rubber gaskets 3 mm thick, etc.,

with all complete. 150 mm dia.

178 Supply, installation, testing & commissioning of Cast 2.00 No 1717.00

iron body Dual Plate Wafer Type NRV conf. to IS:

PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 50 mm dia.

179 Supply, installation, testing & commissioning of Cast 1.00 No 2373.50

iron body Dual Plate Wafer Type NRV conf. to IS:

PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 80 mm dia.

180 Supply, installation, testing & commissioning of Cast 2.00 No 3232.00

iron body Dual Plate Wafer Type NRV conf. to IS:

PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 100 mm dia.

181 Supply, installation, testing & commissioning of Cast 2.00 No 5908.50

iron body Dual Plate Wafer Type NRV conf. to IS:

PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete Accessories 150 mm dia.

182 Supply, installation, testing & commissioning of SG 2.00 No 1212.00

iron body SinglePlate Wafer Type NRV conf. to

ASTMA 536, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete. Accessories 50 mm dia.

183 Supply, installation, testing & commissioning of SG 1.00 No 1616.00

iron body SinglePlate Wafer Type NRV conf. to

ASTMA 536, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete. Accessories 80 mm dia.

184 Supply, installation, testing & commissioning of SG 1.00 No 1868.50

iron body SinglePlate Wafer Type NRV conf. to

ASTMA 536, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets 3 mm

thick, etc., with all complete. Accessories 100 mm dia.

185 Supply, installation, testing & commissioning of Y 1.00 No 5757.00

Type Strainer complete with mating flanges with

bolts & nuts, washers, gaskets 3 mm thick, etc., with

all complete accessories. 80 mm dia.

186 Supply, installation, testing & commissioning of Y 1.00 No 7474.00

Type Strainer complete with mating flanges with

bolts & nuts, washers, gaskets 3 mm thick, etc., with

all complete accessories. 100 mm dia.

Item Description of Item Quantity Unit Rate In Amount

187 Supply, installation, testing & commissioning of Y 2.00 No 12120.00

Type Strainer complete with mating flanges with

bolts & nuts, washers, gaskets 3 mm thick, etc., with

all complete accessories. 150 mm dia.

188 Supply, installing, testing and commissioning of 1.00 No 4292.50

Normax make CI heavy duty ball type foot valve with

flanges, nut bolts, gaskets etc. with necessary

complete accessories. 80 mm dia.

189 Supply, installing, testing and commissioning of 1.00 No 6312.50

Normax make CI heavy duty ball type foot valve with

flanges, nut bolts, gaskets etc. with necessary

complete accessories. 100 mm dia.

190 Supply, installing, testing and commissioning of 1.00 No 12625.00

Normax make CI heavy duty ball type foot valve with

flanges, nut bolts, gaskets etc. with necessary

complete accessories. 150 mm dia.

191 Supply, installation, testing & commissioning of Four 1.00 No 9090.00

way fire brigade Inlet connection with 63 mm dia.

stainless steel (SS304) instantaneous male inlets

with built in non return valve in each inlet with

mm dia. header pipe, suitable rubber cap and GI

chain including nuts, bolts, washers, gasket 3 mm

thick, etc. with all complete.

192 Supply, installation, testing & commissioning of Two 1.00 No 5302.50

way fire brigade Inlet connection with 63 mm dia.

stainless steel (SS304) instantaneous male inlets

with built in non return valve in each inlet with

mm dia. header pipe, suitable rubber cap and GI

chain including nuts, bolts, washers, gasket 3 mm

thick, etc. with all complete.

193 Supplying FIRE bucket round bottom of 9 liters 12.00 No 1111.00

capacity made out of 24 gauge G.I Sheet with extra

handle at bottom duly painted white inside and Red

out side with FIRE mark. Filled with dry-sand and

kept on existing stand provided or hung on wall

194 Supplying and erecting floor mounting Stand for 3.00 No 5757.00

keeping four nos. of FIRE buckets comprising

mm in length, 900 mm height frame made out of

30mm x 30 mm x 4 mm angle iron with cross

supports legs, welded with 4 hooks and duly painted

with one coat of primer and two coats of approved

enamel PO red paint.

195 Supply & installation of stainless steel body Orifice 30.00 No 1212.00

Plate of suitable inner bore along with matching

flange - as per specification & requirement as per

hydraulic calculation.

196 Providing and fixing approved make Perforated C 50.00 Mtr 484.80

type cable tray. Made from pre- galvanized sheet

steel. The cable tray should be bended as per IS

2062/1079 . with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut -

bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer

in charge..(5) 300 X 50 X 1.5 mm Thick

Item Description of Item Quantity Unit Rate In Amount

197 Providing and fixing approved make Perforated C 50.00 Mtr 333.30

type cable tray. Made from pre- galvanized sheet

steel. The cable tray should be bended as per IS

2062/1079 . with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like nut -

bolt and washers etc. erected on existing support as

per Specification and as per instruction of engineer

in charge..(3) 150 X 50 X 1.5 mm Thick

198 Supply, installation, testing & commissioning of 30.00 No 5555.00

Oblique pattern type stainless steel (SS 304) single

headed External Fire Hydrant Valve with 63 mm dia.

female instantaneous outlet conf. to IS: 5290, type -

A, including mating flanges, galvanised nuts,

galvanised bolts/studs, washers & gaskets 3 mm

thick with all complete.

199 Supply, installation, testing & commissioning of 63 30.00 No 1868.50

mm dia. stainless steel (SS 304) Universal Branch

Pipe conf. to IS:

200 Supply & installation, testing & commissioing of Fire 30.00 No 7171.00

Fighting Hose - conf. to IS : 636, type B (type- 3), The

fire hose shall be 15 m long with 63 mm dia. stainless

steel (SS 304) couplings conf. to IS: 903, at both the

ends for connection with the hydrant valve and the

201 Supply, installation, testing & commissioning of 30.00 No 2676.50

fabricated from 3 mm MS sheet, hose box of size-450

mm x 600 mm x 250 mm - painted with Fire Red as

per IS: 5, shade no. 536 front 3 mm thick transparent

glass with lock & key, handle and brass hinges - to

accommodate one number of 15 mtr long hose and

one number of universal branch pipe, including

supporting arrangement with civil work.

202 Supply, Installation, testing & commissioing of 30.00 No 7575.00

Swinging type mild steel hose reel drum with 20 mm

dia. x 30 mtr. rubber hose as per IS: 884. The

mounting stand shall be of mild steel and the hose

shall be fitted with a SS shut-off nozzle & SS ball

valve of 25 mm dia. including supporting

arrangement with all complete. accessories

203 Supplying, fixing & testing of of CI ball Valve 25mm 40.00 No 757.50

204 Supplying, fixing & testing of New Battery of diesel 1.00 No 16008.50

engine 150 Amp.

205 Supply and installation of Diesel Tank For Diesel 1.00 No 16917.50

Engine With All Accessories 100 Ltrs.

206 Supplying, filling & testing lube oil for diesel engine 20.00 Ltrs 328.25

207 Supply and commissioning of Oil Filter. 1.00 No 732.25

208 Supplying, filling of diesel in diesel engine tank 75.00 Ltrs 90.90

209 Supply and commissioning of Diesel Filter 1.00 No 434.30

210 Supplying, filling & testing coolant to engine cooling 20.00 Ltrs 252.50

211 Filling Of Gaps Between pipe and Core Cutting Hole 85.00 No 328.25

With Chemical and Cement

Item Description of Item Quantity Unit Rate In Amount

212 Supplying & erecting XLPE(IS:7098)(I)-88 ISI 60.00 Mtr 146.45

unarmoured copper cable 1.1 KV grade to be erected

as directed of following size. (E) 3 core 2.5 Sq. mm

for pressure switch

213 Providing and erecting XLPE(IS:7098)(I)-88 ISI 60.00 Mtr 292.90

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cable. (Only Fire Panel to Fire

Pump) (B) 3 core 4 Sq. mm

214 Providing and erecting XLPE(IS:7098)(I)-88 ISI 60.00 Mtr 505.00

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cable. (Only Fire Panel to Fire

Pump) (D) 3 core 10 Sq. mm (Only Fire Panel to Fire

215 Providing and erecting XLPE(IS:7098)(I)-88 ISI 50.00 Mtr 222.20

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cable for Diesel Engine Battery

Charger (A) 3 core 2.5Sq. mm

216 Supply, Filling and Fixing of approved make ABC type 30.00 No 2020.00

fire extinguisher - 6 Kg. Capacity as per IS:15683 & IS

217 Supply, Filling and Fixing of approved make CO2 type 30.00 No 5605.50

fire extinguisher. Capacity 4.5 Kg. (conforming to IS-

218 Supply, Filling and Fixing of approved make ABC 10.00 No 3423.73

Moduler type automatic fire extinguisher. Capacity

Kg. (conforming to IS-15683).

219 Submitting the application to obtain Fire Plan 1.00 No 257550.00

Approval and After Completion of Work Obtain Final

Fire NOC for 3 Year.

220 Supply, Installation and commissioning of Air 4.00 No 1515.00

Release Valve, 25 mm Dia. connection.

221 Supply, Installation and commissioning of Fire Alarm 6.00 No 35350.00

Panel Conventional type, 4 zone, with complete

222 Supply, Installation and commissioning of smoke 500.00 No 1060.50

detectors / heat detectors, with complete

223 Supply, Installation and commissioning of plug in 500.00 No 252.50

base for the smoke detectors, hooters, with complete

224 Supply, Installation and commissioning of Audio 21.00 No 1111.00

hooters , with complete accessories.

225 Supply, Installation and commissioning of Manual 21.00 No 1060.50

Call Points, with complete accessories.

226 Providing and erecting XLPE(IS:7098)(I)-88 ISI 8500.00 Mtr 186.85

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A)

2 core 2.5 Sq. mm for Fire Alarm System

Item Description of Item Quantity Unit Rate In Amount

227 Core cutting in wall and in RCC slab with size as 25.00 No 353.50

below: 50 mm dia. Hole

228 Core cutting in wall and in RCC slab with size as 15.00 No 444.40

below: 80 mm dia. Hole

229 Core cutting in wall and in RCC slab with size as 15.00 No 530.25

below: 100 mm dia. Hole

230 Core cutting in wall and in RCC slab with size as 15.00 No 606.00

below: 150 mm dia. Hole

231 Core cutting in wall and in RCC slab with size as 15.00 No 883.75

below: 200 mm dia. Hole

232 Supply, installation, testing & commissioning of ISI 1.00 Set 205000.00

approved electrical motor operated Kirloskar make

fire hydrant main pump set horizontal end suction

back pull out top discharge centrifugal fire pump set

with all the standard acessories, base frame,

coupling, and foundation bolts with following

Model -DB 80/26,

Flow-137 m3/hr,

Motor Rating -45KW/60HP/3 ph

Suc x Del - 100 x

233 Supplying, installing, testing and commissioning of 1.00 Set 454500.00

Kirloskar make diesel engine driven fire hydrant

pump set, suitable for automatic operation and

consisting of horizontal type centrifugal end suction

back pull-out, top discharge pump with cast iron

body and bronze impeller, mounted on M.S.

fabricated common base plate with coupling,

coupling guard, foundation bolts and all necessary

accessories, complete as required. The pump shall be

of Model KFE, having a discharge capacity of

m³/hr at 70 meters head, driven by a 62 HP diesel

engine, 3 phase, with suction and delivery size of

234 Fire Hydrant Panel suitable for 10 HP Jockey Pump, 1.00 No 151500.00

60 HP (137 m³/hr @ 70 m head) Main Electrical

Pump and 62 HP (137 m³/hr @ 70 m head) Diesel

Engine Operated Pump, consisting of Incomer with

MCCB (1 No.), R Y B Indication (1 Set) and VAF

Digital Meter (1 Set); Outgoing with F1 – 60 HP Star

Delta Starter for Main Pump, F2 – 10 HP DOL Starter

for Jockey Pump, F3 – Auto On/Off Diesel Pump with

Battery Charger, Control Circuit with Auto/Manual

On/Off, On/Off Trip Indication and On/Off Push

Button; Fabrication duly powder coated in PO Red

Colour, fabricated from 14/16 SWG GI Sheet with IP-

42 Protection, fixed type floor mounted with bottom

cable entry, complete as required.

235 Pay Legal Fees to Concern Authority for Obtaining 22735.00 Sq.mt 15.15

Plan Approval and Final NOC

236 Earthwork for embankment including breaking 1575.00 Cum 165.25

clods, dressing with all lead and lift (excluding

watering and consolidation)(E) From Borrow area

within 3.0 Km. lead

Item Description of Item Quantity Unit Rate In Amount

237 Rolling of Earth work in layers with power roller and 1575.00 Cum 22.89

watering including filling in depressions which

occure during the process.

238 Supplying of well rotted FYM manure with all lead 54.00 Cum. 454.50

and Lift including spreading mixing dressing and

rolling with hand roller etc. complete.

239 Scarifying the surface of Soil including spreading of 2150.00 Sqm 42.42

DAP fertilizer mixing with Soil properly levelling

gand dressing of the plot

240 Supplying and planting Dibbing semi carpet lawn at 2150.00 Sqm 106.05

distance of abour 15 cm x 15 cm after proper anti

termite teratment amd rolling the seme by hand

roller amd wetering etc complete.

241 Bowing and developing flowering plants grown in 140.00 No. 45.45

nusery having approximate height 4 to 5 ft or Height

ad per Landscaps Plan with natural growith of soil

packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer Pesticides, fungicides,

hormones & maintaining the plants up to three

months as deserted. Bottol palm.

242 Bowing and developing flowering plants grown in 100.00 No. 60.60

nusery having approximate height 4 to 5 ft or Height

ad per Landscaps Plan with natural growith and

nature colour planted in alump of soil packed in

polithyline bag or Earthern pot. Including organic &

chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as

deserted Trinagle Plan.

243 Bowing and developing flowering plants grown in 100.00 No. 75.75

nusery having approximate height 4 to 5 ft or Height

ad per Landscaps Plan with natural growith and

nature colour planted in alump of soil packed in

polithyline bag or Earthern pot. Including organic &

chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as Jasud

244 Bowing and developing flowering plants grown in 100.00 No. 106.05

nusery having approximate height 4 to 5 ft or Height

ad per Landscaps Plan with natural growith and

nature colour planted in alump of soil packed in

polithyline bag or Earthern pot. Including organic &

chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as Croton

245 Bowing and developing flowering plants grown in 60.00 No. 25.25

nusery having approximate height 4 to 5 ft or Height

ad per Landscaps Plan with natural growith and

nature colour planted in alump of soil packed in

polithyline bag or Earthern pot. Including organic &

chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as

deserted green mahindi

Item Description of Item Quantity Unit Rate In Amount

246 Bowing and developing flowering plants grown in 60.00 No. 20.20

nusery having approximate height 4 to 5 ft or Height

ad per Landscaps Plan with natural growith and

nature colour planted in alump of soil packed in

polithyline bag or Earthern pot. Including organic &

chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as

deserted New block ficus.

247 Labour charges for planting various plantsafter 560.00 No. 55.55

proper anti termite treatment in pits including

placing property and filling the pit with requred

prepared mix soil and wetering and dispporting etc

248 Maintance of the garder for 60 days after Complition 1.00 Job. 50500.00

of 3 month stipulated period is completed for

plantation o lawn and plants including applying

second round of proper antitermite tretment.

249 Providing and fixing brass screw doen stop cock (A) 2.00 Rmt 555.50

250 Rubber Hose pope 15 mm dia of approved brand and 200.00 Rmt 80.80

251 Providnig and fixing G I Nipple as directed. 2.00 No. 50.50

252 Point wiring for Tissino / Modular secondary light 209.00 Pt. 200.99

point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 kV grade FRLS

PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth

continuity and necessary connection with primary

light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder /

ceiling rose / H.D.Connector as directed. Note:-

Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

253 Point wiring for Light / Bell with 2-1.5 sq.mm & 977.00 Pt. 582.77

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 kV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector

as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat. III

Item Description of Item Quantity Unit Rate In Amount

254 Point wiring for FAN with 2-1.5 sq.mm & earth wire 582.00 Pt. 809.01

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 kV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Cat. III

255 Point wiring for on board Looped Plug with 6A 287.00 Pt. 309.06

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with

following type accessories Cat. III

256 Providing following type of Modular Type 118.00 Nos 151.50

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (1) One No.

SP 6 Amp. Cat.III

257 Providing following type of Modular Type 118.00 Nos 151.50

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (2) One No

5 pin plug Cat.III

258 Providing following type of Modular Type 442.00 Nos 160.59

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket [A] For One Gang Cat.III

259 Providing following type of Modular Type 492.00 Nos 160.59

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (8)

Computer RJ-45 socket Cat.III

Item Description of Item Quantity Unit Rate In Amount

260 Providing following type of Modular Type 322.00 Nos 180.79

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp.

SP one way switch Cat.III

261 Providing following type of Modular Type 322.00 Nos 199.98

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge. (10)

6/16Amp. Universal socket Cat.III

262 Providing and erecting ISI mark Medium class RIGID 18680.00 Mtr. 33.33

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed (b) 25 mm

263 Providing and erecting Mains with 1.1 kV grade FRLS 7290.00 Mtr. 104.03

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following

size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

264 providing and erecting Mains with 1.1 kV grade FRLS 14652.00 Mtr. 140.39

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

265 providing and erecting Mains with 1.1 kV grade FRLS 150.00 Mtr. 184.83

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm

266 providing and erecting Mains with 1.1 kV grade FRLS 2580.00 Mtr. 326.23

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) with medium class

Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm

Item Description of Item Quantity Unit Rate In Amount

267 Providing and erecting Mains with ISI marked, 1.5kV 320.00 Mtr. 70.70

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe

of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required. (e) One wire 6.00 sq. mm

268 Providing and erecting Mains with ISI marked, 1.5kV 832.00 Mtr. 115.14

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe

of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required. (f) One wire 10.00 sq. mm

269 Providing and erecting Mains with ISI marked, 1.5kV 116.00 Mtr. 177.76

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe

of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required. (g) One wire 16.00 sq. mm

270 Providing and erecting Mains with ISI marked, 1.5kV 132.00 Mtr. 376.73

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe

of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required. (i) One wire 35.00 sq. mm

271 Providing and erecting Mains with ISI marked, 1.5kV 28.00 Mtr. 588.83

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe

of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required. (j) One wire 50.00 sq. mm

272 Providing and erecting Mains with ISI marked, 1.5kV 28.00 Mtr. 837.29

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe

of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

wiring) with required size of copper lugs, nuts and

bolts if required. (k) One wire 70.00 sq. mm

273 Supplying and erecting Flexible PVC insulated multi 216.00 Mtr. 58.58

strand multi core 1.1 kV grade ISI marked copper

wires of following size to be erected as directed. (e)

1.50 Sq.mm 3 core round PVC sheathed

Item Description of Item Quantity Unit Rate In Amount

274 Supplying & erecting approved make Telephone 8840.00 Mtr. 20.20

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC tape

& sheathed with FRLS PVC or HFFR outer Jacket

suitable for telephone wiring & confirming to C-DOT

erected in existing pipe. of following size of

conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs

275 Supplying & erecting approved make LAN cable of 9840.00 Mtr. 47.47

following size in existing pipe as per direction [C]

276 Providing & erecting main Distribution (MDF) indoor 6.00 Nos. 1747.30

type, back mounted frame as per DoT standard

approved with krone strips (c) Suitable for 50 pair

277 Providing & erecting main Distribution (MDF) indoor 6.00 Nos. 3443.09

type, back mounted frame as per DoT standard

approved with krone strips (d) Suitable for 100 pair

278 Providing & erecting Switch board for Computer or 492.00 Nos. 1133.22

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base

frame covered with textured/metallic /white front

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

279 Decorative call bell Ting-tong box type 250 volts 52.00 Nos. 71.71

complete erected

280 Supplying and erecting LED indoor fittings with LEDs 950.00 Nos. 535.30

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy>

lumens /watt, LED

LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver (v) 36-40

Watts, Surge-2 kV, IP-20, conventional 4 feet Cat.III

Item Description of Item Quantity Unit Rate In Amount

281 Supplying and erecting led lamps with following 48.00 Nos. 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED

Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts Cat-III

282 Supplying and erecting LED indoor fittings with LEDs 12.00 Nos. 589.84

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/

CRCA/ aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company

mark/ name 160V to 270V, Power Factor more than

0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt, LED driver efficiency >

% (fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between

the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20 (iii)

16-20 watts, Surge-2 KV Cat.III

283 (B) LED Panel Light with provision for Plane front 82.00 Nos. 2091.71

frame with translucent cover fixed to housing

complete.IP20 (vii) from 45 to 48 watts, 24" x 24",

Surge-2 KV Cat.III

284 Supplying and erecting LED street light / Flood light 42.00 Nos. 4248.06

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between

the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii)

48 - 59 Watts Cat.III

Item Description of Item Quantity Unit Rate In Amount

285 (C) Post Top Lantern LED fitting comprises of finish 24.00 Nos. 4096.56

cast aluminum spigot and spun aluminum canopy

fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired up to

terminal block.IP 65 (ii)32-40W Cat.III

286 Providing and erecting Approved make Four pole 138.00 Nos. 6790.23

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work on A.C. supply

50 Hz. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

287 Providing and erecting Approved make Four pole 29.00 Nos. 8861.74

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal & magnetic

release suitable to work on A.C.supply 50 Hz. with all

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

288 Providing and erecting Approved make Four pole 33.00 Nos. 23041.13

moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V . having

normal current rating 250A. with variable thermal &

magnetic release suitable to work on A.C.supply

Hz. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

289 Providing and erecting Approved make Four pole 7.00 Nos. 27751.77

moulded case circuit breaker having breaking

capacity ICU of 50 KA and above at 415 V having

Normal current rating 400A. with variable Thermal

& magnetic release suitable to work on A.C.supply

Hz. With all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

290 Providing and erecting Approved make Four pole 9.00 Nos. 30991.85

moulded case circuit breaker having breaking

capacity ICU of 50 K.A. and above at 415 V having

normal current rating up to 630A. with variable

thermal & magnetic release suitable to work on

A.C.supply 50 Hz. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing ICS=100% of ICU

291 Providing and erecting Approved make Earth fault 2.00 Nos. 5956.98

Relay suitable to mount with inter connection

suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal

connections & complete erected in existing

M.S.housing.. (3) 250 A -400 A , CT Ratio 1/400

Item Description of Item Quantity Unit Rate In Amount

292 Providing and erecting Approved make Earth fault 3.00 Nos. 6662.97

Relay suitable to mount with inter connection

suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as following

along with shunt trip 220V AC. with all internal

connections & complete erected in existing

M.S.housing.. (4) 600 A -800 A , CT Ratio 1/800

293 Supplying & erecting approved make Four Pole 415V 1.00 Nos. 26149.91

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS

for (G) 630 A. Cat.III

294 Supplying and erecting triple pole & neutral 440V / 14.50 Rmt 1961.42

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus

bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

295 Supplying and erecting triple pole & neutral 440V / 16.00 Rmt 4909.61

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus

bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (C) Suitable for 300 Amp. capacity

296 Supplying and erecting triple pole & neutral 440V / 7.00 Rmt 7319.47

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus

bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (D) Suitable for 400 Amp. capacity

297 Supplying and erecting triple pole & neutral 440V / 10.50 Rmt 10559.55

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus

bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (E) Suitable for 630 Amp. capacity

Item Description of Item Quantity Unit Rate In Amount

298 Supplying and erecting triple pole & neutral 440V / 15.00 Rmt 13199.69

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus

bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary

connections. (F) Suitable for 800 Amp. capacity

299 Providing and erecting Miniature circuit breaker 66.00 Nos. 297.95

single pole 0.5A to 2A system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat.III

300 Providing and erecting Miniature circuit breaker 1072.00 Nos. 123.22

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

301 Providing & erecting 240 V MCB double pole switch 82.00 Nos. 362.59

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity (B) 40 Amp. Cat.III

302 Providing & erecting 415 V MCB Four Pole for Motor 70.00 Nos. 736.29

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (b)40 Amp. Cat.III

303 Providing & erecting 415 V MCB Four Pole for Motor 102.00 Nos. 811.03

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity (c)63 Amp. Cat.III

304 Sheets steel powder coated enclosure suitable for 2.00 Nos. 176.75

incorporating One/Two nos. MCB.

305 Providing and erecting Sheet Steel powder coated 5.00 Nos. 1492.78

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be

used) suitable for (A) single phase incoming and

horizontal single phase outgoing (b) sheet steel

double door (IP-43) (iv)12 way

306 Providing and erecting Sheet Steel powder coated 86.00 Nos. 2339.16

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be

used) suitable for (B) three phase incoming and

single phase horizontal type outgoing Per phase

isolation type (PPI)(b) sheet steel double door (i)4

Item Description of Item Quantity Unit Rate In Amount

307 providing and erecting Approved make RCCBs 263.00 Nos. 2458.34

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for following

Max. rating erected as directed (ii) 40Amps. DP Cat.

308 Providing and erecting Annealed bare Copper wire 130.00 Kg. 794.87

309 Providing and erecting Pipe type earthing having 150 29.00 Nos. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth

pit complete with necessary 8 SWG earth wire.

310 For using salt and charcoal / coke as required for 29.00 Nos. 171.70

pipe type earthing.

311 Supplying & erecting earth pit of minimum bore 26.00 Nos. 5760.03

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of applications

with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including

value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for

long time Necessary test report must be submitted

by Agency. (b)For Electrical installation up to 11 kV

in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Item Description of Item Quantity Unit Rate In Amount

312 Providing & erecting weather proof, dust & vermin 30.00 Smt. 10468.65

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy duty

end terminal connection,danger notice

board,necessary ventilation,earthing strip complete.

The Panel shall be painted with epoxy powder

coating. (The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel