MAINTENANCE/REPAIRS TO PLASTERING, FLOORING, JOINERY, PLUMBING, SANITARY FITTINGS, FOOT PATH, DRAINS, FENCING, COMPOUND WALL, GATES AND CLEANING OF SEWER LINES, SEPTIC TANKS ETC AT ARMY AREA UNDER AGE (I) TRICHY.

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:4:8 Type D2 using 40mm graded stone aggregate as in floors and paving, laid in panels and finished even & smooth without using extra cement complete all as specified and directed.

M&L for sand filling under floors, in foundations, in trenches as a cushioning/bedding and haunching to PVC pipe etc., including watering and consolidation complete all as specified and directed.

M&L for factory made, machine pressed, 60 mm thick, M-35 grade concrete interlocking paver blocks (glossy/reflective type), with grey cement and without pigment, any shape and size conforming to IS:15658-2006 complete all as specified and directed.

M&L for providing cement concrete 1:3:6 Type C1 using 20mm graded stone aggregate as in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating with necessary form work complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles all as specified and as directed.

M&L for Brick work in cement mortar 1:6 with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) including cutting reinforcement as required to facilitate demolition complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed.

M&L for mild steel TMT bars, 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed

M&L for cleaning/ desilting of existing bed of the drains constructed in any masonry, average thickness not exceeding 10cm including removal of cegetains, growth or bushes, roots and getting out including disposing off excavated silt, soil, vegetations, shrubs etc to a distance not exceeding 100m where directed and deposited at a level not exceeding 1.5m above the stating point complete all as specified and directed

Dismantling posts or struts (wood, steel or RCC), any section, including taking out embedded portion and making good disturbed ground; posts embedded in natural ground complete all as specified and directed.

M&L for Providing Reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in precast fencing posts, struts, etc, average sectional area not exceeding 100 Sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops including necessary formwork complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for preparing new plastered or unplastered wall surfaces and applying three coats of white wash complete all as specified and directed.

S&F Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed

Supply only chain link mild steel galvanized fencing any type or size complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparing new or previously untreated steel and iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Cleaning of septic tank of any description, size, depth and in any position, of capacity 10 users by using dewatering pumps sets including cleaning mechanically or manually by taking off sludge waste/night soil including necessary excavation in hard / dense soil , refill and disposal of surplus soil etc complete removal of sludge, sediment, vegetation in covered vehicles and making arrangements for disposal of sewage water in nearby nallahs/drains to an extend of 3m all around, complete all as specified and directed. [Note:- Cost of transportation of pumping set to work site, fuel for pumping set, etc is deemed to be included in the quoted unit Rate. Nothing extra on this account will be admissible.]

All as per item No 24.00 here in before but septic tank of capacity 25 users complete all as specified and directed.

All as per item No 24.00 here in before but septic tank of capacity 25 users complete all as specified and directed.

Cleaning of existing chocked /blocked sewage lines (buried underground at any depth) of any bore/dia, description and in any position by taking out loose sediments such as sand, girt, ash, sludge water, rags, fibers, vegetation, etc including removal of sludge/debris to a distance exceeding 250m but not exceeding 500m complete all as specified and directed.

Opening and cleaning of blockage of kitchen/bath or WC floor traps of any pattern and in any position by rodding or manually upto 1st manhole complete all as specified and directed.

Removing existing sludge waste/night soil from soak well of any description, size, depth and in any position, by using dewatering pumps sets for disposal/removal in nearby nallahs/drains to a distance exceeding 500 m not exceeding 1 km complete all as specified and directed. [Note:- Cost of transportation of pumping set to work site, fuel for pumping set, etc is deemed to be included in the quoted unit Rate. Nothing extra on this account will be admissible. ]

M&L for Loose filling with aggregate of broken bricks of gauge 80 to 150mm in soakage pits, soakage wells, etc complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC, RCC or PVC) of internal dia 150 mm, set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard/dense soil complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50m and not exceeding 250m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

S&F PVC (SWR) pipes 160 mm nominal diameter, Class 1, (IS-15328), single or double socketed, in any length with elastomeric sealing ring type or solvent cement joints, laid in trenches and jointed as specified complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in bed blocks of manhole complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains complete all as specified and directed.

S&F PVC (SWR) gully trap 110mm, setting and jointing with solvent cement complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, 150/200 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed.

Removing carefully the existing steel gate / door of any description of size not exceeding 9 sqm from existing position by dismantling and refixing the same in position after repairing complete all as specified and directed by Engineer-in-Charge . NOTE : (a) Broken/rusted steel members of gate / door shall be replaced with new mild steel members as per existing by proper welding all as specified and directed by Engineer-in-Charge .(b) New mild steel members shall be measured and paid separately under serial item No 42.00 as supply only.

Supply only mild steel members conforming to Fe 410-W (Gde E-250) quality -A as in doors or gates of angle or other section with gusset plates, rails, braces,mild steel bars,plates etc. required for repairing gates/doors and silimar works complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a alkali resistant primer complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in in cement mortar 1: 6 as backing coat and CM 1:4, 5 mm thick with water proofing compound on faces of brick work or concrete surfaces; mixed and finished fair and even complete all as specified and directed. (water proofing compound to be measured & paid separately as supply only)

Supply only integral water proofing compound complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of walls and applying one coat of cement paint complete all as specified and directed.

M&L for preparing new plastered or un-plastered wall surfaces and applying two coats of distemper oil emulsion, white or tinted over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces with putty and preparation of surfaces for further treatment and applying two coats of distemper oil emulsion, white or tinted over a coat of priming coat using chalk whiting complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling with water and bleaching powder and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of walls with water and bleaching powder and applying three coats of white wash on walls complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for vitrified light shade flooring tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, laid in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 300mm x 200mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed.

M&L for 18-20 mm thick granite (of any type) work (area not less than 1.5 sqm each granite slab, table rubbed and polished) in floors and like; in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Chequered cement concrete tiles with grey cement and pigments 200mm x 200mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L For Drilling holes in granite top (20mm) in the RCC slab (75mm) for bolts, pipes, etc. exc 25mm -n.exc 60mm dia complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore, including cleaning (tubings only and not connections) for refixing complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore, including cleaning (tubings only and not connections) for refixing complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Refixing old steel tubing 15 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

Refixing old steel tubing 20 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

Dismantling water tanks of capacity exceeding 500 litres and not exceeding 500 litres complete all as specified and directed.

S&F Rotational moulded (three layered, ISI marked) polyethylene water storage tanks (cylindrical vertical with closed top) of 750 litres capacity including PVC cover, hoisted and fixed in position including connecting up pipes complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.

M&L for waterproofing plaster in mortar 1:3(Mixed with WPC 3% by Weight of Cement) 15mm thick for sunken treatment complete all as specifiied and directed. (Note:WPC Shall measured and paid in relevant item)

M&L for PCC (1:5:10), Type D2 (using 40mm graded stone aggregate) as in filling of sunken floor complete all as specifiied and directed.

S&F vitreous china wash down water closet pan, pedestal pattern concealed, ISI marked, white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 litres capacity, ISI marked, white, with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe, complete all as specified and directed.

S&F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.

S&F in repairs stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.

S&F PVC connection 450 mm long with brass unions at both ends, suitable for 15 mm bore pipe, complete all as specified and directed.

S&F PVC connection 600 mm long with brass unions at both ends, suitable for 15 mm bore pipe, complete all as specified and directed.

S&F in repairs Vitreous china wash basin, ISI marked, white, flat back, size 550 x 400mm, including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed.

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, ISI marked screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

S&F bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repairs bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 75 mm size with swivel joints complete all as specified and directed.

S&F in repairs hand shower (health faucet) with 8mm dia 1.0 mter long flexible tube and wall hook complete all as specified and directed.

S&F in repairs Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed.

S&F High density polyethylene pipes (HDPE) 32 mm bore of pressure rating 6 Kgf/Sqcm, laid in trenches/ground complete all as specified and directed

S&F in repairs Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size:- 430mm x 510mm x 203mm, bowl size:- 430mm x 380mm x 203mm, including CP waste coupling and 32mm dia PVC waste pipe of suitable length complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) incl all fitiings ,heads,shoes,bends,swan-necks etc incl cleaning or re-fixing or removal to store (measured overall as fixed along the centre line over fitiings and accessories).

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls,110 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls,75 mm bore complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, dia of outlet 75 mm complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) branch pieces, single (single Y) equal or unequal, 110 mm bore complete all as specified and directed

S&F in repairs PVC (SWR) branch pieces, single (single Y) equal or unequal, 75 mm bore complete all as specified and directed

S&F in repairs PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Refixing shutters of any description exc 1 Sqm n exc 2 sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed.

M&L for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

M&L for factory made Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F Flush shutters 35 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F securing glass of any description in existing metal frames glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work

S&F Butt hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified and directed

S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section, 100 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 200 mm long complete all as specified and directed.

S&F Aluminium handles, cast type, 75 mm size complete all as specified and directed.

S&F Aluminium handles, cast type, 100 mm size complete all as specified and directed.

S&F Aluminium handles, cast type, 150 mm size complete all as specified and directed.

S&F Aluminium alloy, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 140 mm complete all as specified and directed.

S&F in repairs Continuous (Piano) hinges, mild steel, bright finish or electro galvanized, 40 mm width of flaps (when open) complete all as specified and directed.

S&Fin repairs Harrison rails, anodized aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F 40 mm dia, cupboard knobs fixed with nut, screws and washers of brass, polished complete all as specified and directed.

M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L for Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Chipping of loose concrete carefully broken plastering in chajjas ceiling, fins, fascias and applying one coat of rust remover of approved brand DR FIXIT PIDICRETE and applying one coat of approved concrete bonding agent against for old and new plaster/concrete including Rendering 20mm thick in CM 1:4 in two coats i.e. each coat 10mm thick as in repairs of chajjas ceiling, fins etc complete all as specified and as directed. Note : Rate quoted deemed to inclusive cost of rust remover and concrete bonding agent.

M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

Welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length, thickness of metal to be welded not exceeding 6mm complete all as specified and directed.

M&L for forming contraction (Dummy) joints 65mm deep & 10 mm wide, filled with sealing compound Grade ‘A’ complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.

S&F Steel work in tubular/structural trusses, purlins, etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for preparation of new plastered or unplastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

S&F Mild steel conforming to Fe-290 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed.

al mecho fab

RELIANCE SALES AGENCY