REPAIR TO ADM BLOCK, OFFRS MESS, AUDITORIUM IN SECTOR A OF AGE B R II NORTH UNDER GE N AMBALA CANTT

Amount

M&L brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 including demolition complete all as specified and as directed by the Engineer-in-Charge.

M&L brick work with sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete including demolition complete all as specified and as directed by the Engineer-in-Charge.

M&L Cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in plinth , 75mm thick, finished even and smooth without using extra cement, including making joints 10mm wide and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and as directed by the Engineer-in-Charge.

M & L for 75mm PCC 1:4:8 Type D2 40mm graded aggregate as in sub base complete all as specified and as directed by the Engineer-in-Charge.

M&L non skid ceramic designer Endura tiles of size 300 x 300 mm x10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:4) including demolition complete all as specified and as directed by the Engineer-in-Charge. Make : ENDURA of M/S Johnson Ltd orrient somany.

M & L for Machine pressed precast concrete interlocking coloured paver block (Rubber moulded) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with Grey cement and pigment over40 mm thick sand cushining including demolition and complete all as specified and as directed by the Engineer-in-Charge. Make NTC, surya kiran , NITCO, Ultra.

Roughening surfaces of old concrete floor by picking, sweaping clean and washing down with water to remove dust etc complete all as specified and as directed by the Engineer-in-Charge.

M & L for machine cut kota stone slab flooring 18-20mm thick over 20 mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing including demolition complete all as specified and as directed by the Engineer-in-Charge.

M&L for 16-18 mm granite (of any type) work (table rubbd and polished) in steps, jambs, pillars, window-cills, cooking platforms flooring and like in cement mortar over 15 mm thick screed bed (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including demolition complete all as specified and as directed by the Engineer-in-Charge.

M&L for cement concrete 1:2:4 type B-0 using12.50 mm graded stone aggregate in floors, 25 mm thick, complete all as specified and as directed by the Engineer-in-Charge.

M & L for premium quility joint free coloured Vitrified ceramic tiles 7-8mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but n.exc 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cm 1:6.and including taking down old tile complete all as specified and as directed by the Engineer-in-Charge. Make Kajaria, Johnson sommy, orient.

All as per item No 1.14 above but vertical surfaces with 10 mm thick rendering in cm 1:4 including taking down old tile complete all as specified and as directed by the Engineer-in-Charge. Make Kajaria, Johnson sommy, orient.

M&L for premium quility joint free coloured Non Skid coloured ceramic tiles 7 to 8 mm thick, (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match inculding 15mm thick screed bed in cm 1:6 inculding taking down complete all as specified and as directed by the Engineer-in-Charge. Make Kajaria, Johnson sommy, orient.

All as per Item No 1.13 above but on vertical surface over 10mm thick rendering in cm 1:4 including taking down complete all as specified and as directed by the Engineer-in-Charge.

M&L premium quility joint free coloured glazed ceramic coloured tiles 450 mm x300 mm x 7 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendring in CM (1:4) inculding taking down old tile complete all as specified and as directed by the Engineer-in-Charge. Make Kajaria, Johnson sommy, orient.

M&L 15 mm thick cement plaster on fair faces of bricks or concrete walls in CM 1:4 finished even and smooth with out using extra cement on brick work or concrete surfaces with out using extra cement including taking down complete all as specified and as directed by the Engineer-in-Charge.

M & L for Rough cast plaster over and including 10mm thick base rendering in CM (1:4) on brick or concrete surfaces including taking down etc complete all as specified and as directed by the Engineer-in-Charge.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement including taking down complete all as specified and as directed by the Engineer-in-Charge.

M&L rendering 10 mm thick in CM 1:3 on concrete surfaces finished even and smooth with out using extra cement on ceiling including taking down complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing new plastered or plastered surfaces of walls and applying two coats of cement base paint over & including a coat of Alkali resistant primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by the Engineer-in-Charge.

M&L preparing new plastered surfaces of walls and applying two coats of oil bound distemper with painting roller over a coat of primer over 1 -2 mm thick birla wall care putty complete all as specified and as directed by the Engineer-in-Charge.

S & F of fixing GI OREO Metal Suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. frame shall be same menufucture complete all as specified and as directed by the Engineer-in-Charge. Make - DEXUNE, Armstones, Hi-steel.

S&F 5-8mm thick solid profile designer PVC paneling with panel of width 250mm to 300mm fixed to wall/ceiling with screw and rawel plug including PVC beading (U,L section) wherever required.including dismantling complete all as specified and as directed by the Engineer-in-Charge.

POP (Plaster of Paris) false ceiling applying 10 to 12 mm thick POP finish over ceiling surfaces with wall care putty mixed with POP powder in ratio of 1:10 complete including one dome not less than 1 metre dia and frame work including dismantling complete all as described below :- (a) PGI sheet of 26 gauge in angle shape of size 25 x 25 mm all around the wall complete all as specified and as directed by the Engineer-in-Charge. (b) Main runners of 26 gauge PGI sheet in angle shape of size 35 x 25 mm at the interval of 90 cm centre to centre complete all as specified and as directed by the Engineer-in-Charge. (c) Cross runners of 26 gauge PGI sheet in angle shape of size 35 x 25 mm at 40 cm center to center complete all as specified and as directed by the Engineer-in-Charge. (d) Suspender/ hanger of 26 gauge of PGI sheets in angle shape of size 25 x 25 mm fixed to soffits of roof by steel fastener complete all as specified and as directed by the Engineer-in-Charge.

Making POP cornices 75/100 mm wide of required design complete all as specified and as directed by the Engineer-in-Charge.

S&F Stainless steel railing with horizontal pipe of 32 mm dia, vertical pipe of 40 mm dia and nosing 40 mm dia at spacing of 300 mm horizontal and 900 mm c/c of vertical and intermediate size and shape of pipe as approved by GE including embedding in steps/wall with necessary holdfats, PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) bed blocks etc. complete all as specified and as directed by the Engineer-in-Charge.

S&F galvanised mild Steel water tubes, medium grade, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed by the Engineer-in-Charge.

S&F galvanised mild Steel water tubes, medium grade, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats with shutter not exc 1.5 Sqm (without taking off shutter from the frames ) complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sqm but not exc. 2 Sqm each incl removing from site complete all as specified and as directed by the Engineer-in-Charge.

Taking down and refixing of old shutters in same opening of any description exceeding 1 Sqm each but not exceeding 2 Sqm each to other arms of chowkhat (pressed steel) including welding and taking down old hinges (new hinges to be paid separately) complete all as specified and as directed by the Engineer-in-Charge.

Rolled mild steel sections conforming to Gde Fe-410-0 or Fe-310-0 as in framing for cladding, glazing and the like including door frames/ chowkats, fixed with angle cleats and connecting plates, etc complete all as specified and as directed by the Engineer-in-Charge.

S&F for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed by the Engineer-in-Charge.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by the Engineer-in-Charge. Make : Syntex / Rajshree Plastic Wood Forex, Indore

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and complete all as specified and as directed by the Engineer-in-Charge. Make : Syntex / Rajshree Plastic Wood Forex, Indore

S&F for flush shutters 32 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge.

S&F for factory made second class hardwood glazed and skeleton door shutter 35 mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated with sash bars, any numbers, to receive glass, gauze, etc complete Size of members of shutteras per clause 8.24(a) of SSR Part Icomplete all as specified and as directed by the Engineer-in-Charge.

S&F factory made second class hardwood glazed and skeleton window shutter 35 mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated with sash bars, any numbers, to receive glass, gauze, etc complete Size of members of shutteras per clause 8.24(b) of SSR Part Icomplete all as specified and as directed by the Engineer-in-Charge.

S&F Second class hardwood 35 mm thick "Factory Made Shutter" plain framed paneled shutters (two panel or more panel) with lock rail and panel of 12mm thick BWP commercial ply the size of rail and stile as per IS 1003 (part I) klin seasoned chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, with glazing bars complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, without glazing bars complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Steel ventilators with Side hung shutter including hinges, steel peg stay complete all as specified and as directed by the Engineer-in-Charge.

S&F Mild steel conforming to Fe 290-0 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium powder coated door . including frame with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 5.5 mm thick frosted glass/plain with black film including necessary fittings, fixtures & aluminium snap beads complete all as specified and as directed by the Engineer-in-Charge.

S&F aluminium powder coated windows and ventilator including frame tinted coloured glass panels of colour as directed, rubber/aluminium beading for securing glass, 02 Nos aluminium anodised handles 125mm size, including 02 Nos tower bolt aluminium anodized 200mm size and glazing clips 75mm size extruded aluminium alloy butt hinges as required as per area of shutteromplete complete all as specified and as directed by the Engineer-in-Charge.

S&F aluminium chequered grill powder coated with aluminium anodized of diamond shape with 6 mm dia wires and mesh of size 75 x 75 mm in aluminium 'Y' channel and aluminium flat 25 mm wide fixed with aluminium screws complete all as specified and as directed by the Engineer-in-Charge.

S&F Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane fixed in repair including taking down complete all as specified and as directed by the Engineer-in-Charge.

S&F Figured glass, pin head type 4 mm thick and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane fixed in repair including taking down complete all as specified and as directed by the Engineer-in-Charge.

S&F 5.5 mm thick tinted glass pan , templet glass fixed type for counter/fixed with rubber bead etc in door including taking down complete all as specified and as directed by the Engr-in-Charge.

S&F in repairs 8 mm thick tinted glass pan , templet glass fixed type for counter etc complete all as specified and as directed by the Engr-in-Charge. Make : Saintgobin or equivalent as specified and approved by Accepting Officer complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and brackets (wall to wall or flush to wall) including two nos latoo for securing to curtain rod complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing new or previously untreated steel & iron surfaces of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

S & F IInd class Hard wood (Sal) in Scantlings clean sawn timber framed & fixed complete all as specified and as directed by the Engineer-in-Charge.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa AZ, 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick A Z 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and as directed by the Engineer-in-Charge.

M&L for ornamental and intricate design framed work of rolled mild steel conforming to Gde Fe 410-0 or Fe 310-0 as in gates of angle or other section with gusset plates, rails, braces, etc, to be prepared for hanging with and including either hooks & hinges or steel hanging door fittings and hanging, fastening & fixing including drilling & welding including dismantlingcomplete all as specified and as directed by the Engineer-in-Charge.

S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I S.1161-1979 grade St.-240 including dismantling of wooden truss and members complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair PVC lid cover water tank of capacity 500 litres including fixing device complete all as specified and as directed by the Engineer-in-Charge.

S&F Galvanised mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.18 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&F Ordinary rat tail rod pattern springs 200 mm of mild steel including roller and roller plate complete all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium anodised barrel tower bolts of extruded section, 200 mm long complete all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and as directed by the Engineer-in-Charge.

S&F Butt hinges, stainless steel medium weight 100 mm size complete all as specified and as directed by the Engineer-in-Charge.

S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and as directed by the Engineer-in-Charge.

S&F Butt hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium handles, cast type anodised, 125 mm size complete all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium handles, cast type anodised, 125 mm size as fixed in repair complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs aluminium anodised barrel tower bolts of extruded section, 200 mm long complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair vitreous china wash hand basin, white, flat back, size 550 x 400 mm including brackets and cutting for and pinning in ends of brackets fixed in repair complete all as specified and as directed by the Engineer-in-Charge. Make- Cera hindware, prayag, parryware. Note : Pillar tape shall be measured & paid separately.

S&F in Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and as directed by the Engineer-in-Charge. Make - Cera, hindware, prayag, parryware.

S&F in repairs tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges complete all as specified and as directed by the Engineer-in-Charge. Make- Cera, hindware, prayag, parryware.

M&L cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in hold fast, kerbs etc complete all as specified and as directed by the Engineer-in-Charge.

M&L cutting of tree's trunk not exceeding 30 cm girth and branchas and digging cut roots from floor or roof and walls and making good the dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 type B-1 to match the existing surface complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls, 110 mm bore including demolition complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed in trenches, 110 mm bore including demolition complete all as specified and as directed by the Engineer-in-Charge.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including demolition complete all as specified and as directed by the Engineer-in-Charge.

S & F PVC 110mm bore (SWR) branch piece, double (double Y) equal or unequal, complete all as specified and as directed by the Engineer-in-Charge.

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge.

S&F 110 mm PVC (SWR) junction (single T) equal or unequal complete all as specified and as directed by the Engineer-in-Charge.

S&F 75 mm PVC (SWR) junction (single T) equal or unequal complete all as specified and as directed by the Engineer-in-Charge.

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge.

S&F 110 mm PVC (SWR) reducers complete all as specified and as directed by the Engineer-in-Charge.

S&F 75 mm PVC (SWR) vent cowl complete all as specified and as directed by the Engineer-in-Charge.

M & L for stack clamps made out of 30mm x 3mm MS flat iron and 16mm dia round iron stays incl nuts and bolts and securing ends of stays to wall for 110 mm dia bore of PVC pipes fixed in repairs complete all as specified and as directed by the Engineer-in-Charge.

S&F CP central hole basin mixer without popup waste system with 450 mm long braided hoses as fixed in repair complete all as specified and as directed by the Engineer-in-Charge. MAKE : Cera, hindware, prayag, parryware.

S&F Chromium plated anglular stop cock (ragulating vlaves) with wall flange cast copper alloy square pattern luxury chromium plated 15 mm dia complete all as specified and as directed by the Engineer-in-Charge. MAKE : Cera, hindware, prayag, parryware.

S&F Vitreous china coloured one piece water closet pedestal type with trap, seat cover and cistern with dual flush fitting complete all as specified and as directed by the Engineer-in-Charge. Make : Cera,hindware, prayag, parryware.

S&F Vitreous china coloured pedestal pattern wash basin of size 550 x 470 mm, fixed in repair complete all as specified and as directed by the Engineer-in-Charge. Make : Cera, hindware, prayag, parryware.

S&F Chromium plated stainless steel towel rail, 450 mm long grab bar including fittings fixed in repair complete all as specified and as directed by the Engineer-in-Charge. MAKE : Cera, hindware, prayag, parryware.

S&F CP stainless towel rack with single rail, fixed in repair complete all as specified and as directed by the Engineer-in-Charge. MAKE : Cera, hindware, prayag, parryware.

S&F Towel ring fancy type CP fixed with brass screw and wooden/plastic cleats superior quality complete all as specified and as directed by the Engineer-in-Charge. MAKE : Cera, hindware, prayag, parryware.

S&F Wall mixer 3-in-1 chromium plated, fancy type non telephonic with telephonic hand showerand cruch with tube and hook 'Hot' and 'Cold' fixed in repairs complete all as specified and as directed by the Engineer-in-Charge. MAKE : Cera, hindware, prayag, parryware.

Chromium plated shower rose with revolving joint (with body rotation) & 115 mm long shower arm complete all as specified and as directed by the Engineer-in-Charge. MAKE : Cera hindware, prayag, parryware.

Toilet paper holder, box type of brass, chromium plated fixed to walls with chromium plated brass screws fixed in repair complete all as specified and as directed by the Engineer-in-Charge. MAKE : Cera hindware, prayag, parryware.

M&L Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests, fixed in repairs including provision of cement concrete bedding complete all as specified and as directed by the Engineer-in-Charge. Make- Cera hindware, prayag, parryware.

M&L Cast iron 100 mm sanitary connection socket to fit WC out-let fixed in repair complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (angle type) screwed both ends for iron pipe or for unions 15 mm bore complete all as specified and as directed by the Engineer-in-Charge. Make - Cera hindware, prayag, parryware.

S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore complete all as specified and as directed by the Engineer-in-Charge. Make - Cera, hindware, prayag, parryware.

S&F in repairs grating round 125 mm size with waste hole of stainless steel complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs brass chromium plated shower rose 65 to 90 mm size with swivel joints,complete all as specified and as directed by the Engineer-in-Charge. Make- Cera hindware, prayag, parryware.

S&F in repairs PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and as directed by the Engineer-in-Charge. Make Cera hindware, prayag, parryware polytaff.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 142 gms), complete all as specified and as directed by the Engineer-in-Charge.

Material & Labour for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, including dismantling all as specified and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White.

Material & Labour for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, including dismantling all as specified and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White.

S & F 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.

S & F 15 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair 15mm bore bib tap fancy type CP brass with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. Make Cera, hindware, prayag, parryware.

S&F in repairs PVC floor trap with grating including jointing to waste pipe, dia of outlet 65 mm, complete all as specified and as directed by the Engineer-in-Charge.

Taking down Aluminium door from frame n.exc 4 sqm for necessary repair work like change of rubber beads, aluminium cleats , Floor Spring, Door Spring , glass pane, lock etc.. if necessary for smooth functioning finish propoerly, re-fixing in same opening after adjusting of the same complete all as specified and as directed by the Engineer-in-Charge. Note : Floor Spring, Helical Door Spring & Glass shall be paid seperately in respective items

M & LDhoulpur stone 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including screed bed or bedding layer 15 mm thick in CM (1:4) at vertical surfaces such as skirting, dado and risers to steps including dimantling complete up to 6 mtr height complete all as specified and as directed by the Engineer-in-Charge.

M&L Double action floor spring hydraulically regulated made up minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs PVC connections 15 mm size with brass nuts of length 450 mm, complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type long body, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and as directed by the Engineer-in-Charge. Make Cera hindware, prayag, parryware.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboaratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including supply and fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915 mm x 460 mm min bowl size 410 mm x 330 mm x 160 mm min complete all as specified and as directed by the Engineer-in-Charge. Make Nirali, Neelkanth, blue star prayag .

S&F in repairs Stainless steel plate rack (utensil rack) of size (600 mm x 750 mm) min and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts fixed in repairs complete all as specified and as directed by the Engineer-in-Charge. Make Nirali, Neelkanth, blue star prayag .

S&F in repair aluminium (Diecast) body hydraulically door closer regulated,designation No.3, universal type,suitable for door shutters of 851 mm to 1000 mm in width and weight between 61 to 80 Kg complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs drapery rods with finials and rings fixed in repairs complete all as specified and as directed by the Engineer-in-Charge. NOTE- RAR will be processed only after production of voucher of door, window, sanitry fittings, cement, tiling,CP fittings, GI fittings, galvalume sheet, OBD, Cement base paint, S/E paint etc,

Swami Enterprises

bhagwandasswazirchand