Construction of 2x12.5 MVA, 33/11 kV Substation, its assosiated 11.30 km 33 kV (6.80 km OH and 4.50 km UG line) and 06 no. 11 kV feeders- 12.70 km Single circuit and 3.30 km, double circuit at Sugar Mill Sarkada, Sitarganj, US Nagar inc. Civil works

Amount

33KV Substation & Bay (Material) MS Round 32mm dia 6.21 Kg/mtr for earth mat, electodes for earth mat & delta earthing

MS Angle 65x65x6mm for cleat at cross joint

G.I. strip 65x6mm

G.I. strip 50x6mm

RS Joist 175x85x6mm

MS angle 40x40x5mm

Wire mesh fencing with 4mtr and 1mtr wide gate duly painted on both sides.

M.S. channel 125x65mm (8.5x4+3.2x1+3.5x1)x14

M.S. angle 50x50x6mm

33 KV, 10 KA Lightening Arrester

33 KV Polymer Disc Insulator

Disc Fitting 90 KN B&S for Panther

M.S. bolt & nut with washers.

Stone pad 300x300x75 mm.

MS plate 225x225x8 mm thick

33KV Line Isolator 800A

M.S. Angle 75x75x8 mm

M.S. flat 50x6 mm.

33KV Bus Isolator 800A

33 KV 1250A 3 Phase O/D type VCB 24 V DC

33 KV CT Outdoor CTR 600-300/1-1-1 A with Junction Box

MS Plate 400x400x8 mm.

33 KV Fuse Set

33 KV/110 V O/D type PT with Junction box

MS Plate 400x400x8 mm.

Rail 90 Lbs

MS Bar, 12 mm Dia for Steel reinforcement

ST pole SP- 33, 9.0 mtr long (Bottom portion hot dip galvanised)

M.S. Channel 100x50mm

Earthing rod 20x2500mm

33 KV Aluminium 3Cx50 sq. mm. XLPE

LT XLPE Cable 3.5x50Sq.mm. for Stn. T/F to ACDB.

ACSR Dog conductor

33/0.433 KV, 63 KVA Station Transformer

PP clamp with bolts & nuts

G.I.Strip 35x4mm

Alu lug for T/F HT & LT side.

PG clamp for Panther to Dog Conductor

PG clamp for Bus isolator,Fuse Set suitable for Dog Conductor

Clamp of required size for holding cable supporting channel, pipe, cable etc.

Name plate for station transformer with clamp, nut & bolt

33 KV Danger board with clamp

Stone Pad 300x300x75

GI pipe 4" dia. 3mtr long

Cable jointing kit outdoor type suitable for 3Cx50 sq. mm. XLPE cable 33 KV.

ST Pole SP-23 bottom portion hot dip galvanised

11 KV Polymer disc insulator B&S 7000 Kg

11 KV Disc fitting for weasal 45 KN

11 KV TPMO complete/GO Switch

Stay set GI 16x1800 mm complete

Stay wire 7/10 SWG

GI Wire 6 SWG

9 KV10 KA lightening arrestor

11 KV Fuse set.

P.P. & Clamps for S.T. Pole Sp-23

Bracing Clamp for ST Pole Sp-23

Stay clamp for ST Pole Sp-23

Clamp of required size for holding cable supporting angle, cable & TPMO handle

Name plate of feeder

11 KV Danger board with clamp

Stone Pad 300x300x75

GI pipe 4" dia, 3mtr long

ACSR Panther conductor

Disc insulator B&S 120 KN

Disc fitting B&S type 90 KN for Panther

PG clamp Panther to Panther

PG clamp Panther to Dog

Connectors suitable for Panther for Lightening Arrestor

Connectors suitable for Panther for Isolator

Connectors suitable for Panther for 33 KV VCB

Connectors suitable for Panther for 33 KV CT

Connectors suitable for Panther for 33 KV PT

Connectors suitable for Panther for 33 KV Fuse Set

Connectors suitable for Panther for T/F HT side

Connectors suitable for Panther for T/F LT side

Flexible copper connection on neutral bushing of power & station transformer 500X50 mm heavy duty with copper lug at ends.

Control Panel 33 KV Double transformer, 24 V DC

Control Panel FDR 33 KV Double Ckt, 24 V DC

11 KV VCB I/C 500MVA, 800/400/5A, 110V AC

11 KV VCB FDR 350/500 MVA, 400/200/5A, 110V AC

11 KV VCB B/C 350/500 MVA

11KV Aluminium 3x300 sq. mm. XLPE cable from T/F to incomer VCB

11KV Aluminium 3x185 sq. mm. XLPE from outgoing VCB to out going feeder poles

Jointing kit for 3X185mm² 11KV XLPE cable Outdoor type

Jointing kit for 3X185mm² 11KV XLPE cable Indoor type

Jointing kit for 3X300mm² 11KV XLPE cable Outdoor type

Jointing kit for 3X300mm² 11KV XLPE cable Indoor type

LT Control Cable 10C x 2.5 Sq. mm.

LT Control Cable 6C x 2.5 Sq. mm.

LT Control Cable 4C x 2.5 Sq. mm.

LT Control Cable 2C x 2.5 Sq. mm.

MS Angle 40x40x5mm for cable trench

MS Bar, 10 mm

Perforated tray for cable trench-400 mm width

Perforated tray for cable trench-200 mm width

Perforated tray for cable trench-100 mm width

STP 8M-IS 410 SP-10 (Bottom portion hot dip galvanised)

LT PVC cable 4x10 sq. mm.

LT PVC cable 2x6 sq. mm. (Armed)

Stone pad 300x300x75 mm.

85W LED lamp with control gear & mounting accessories

DigitalTimer for on/off of yard and sgr lightening 220V AC

3 phase AC Contractor 440V,25A including DB & MCB

24 V Battery charger

24 V Battery set Maint. Free

DCDB 24 V

Instruction board 3’x2½’ of Flex board duly printed.

Single line diagram of size 3’x2½’ on flex board, duly printed.

Maximum & tripping display board of size 5’x3’ of mica board moulded with frame duly painted & writing.

Sub-station named board (Size 3'x2' of MS sheet & MS angle 45x45x5 mm, Height 1.5 mtr. Above ground level ), duly painted

Name plate of equipment TG, LI, BI, PI, BG, CT, PT, CB, LA etc.

Sundries items Cable tie, Alu lug, Copper lug & HT, LT tape, pvc compound, ferrule, pvc flexible pipe, paint writing on panels, HT LT diff size cable gland.

Steel office table of size 5'x3' reputated company make

Steel office table of size 4'x2.5' reputated company make

Steel Almirah reputated company make

Steel cabinet reputated company make

Steel office chair reputated company make

1400 mm sweep ceiling fan with Regulator

Padestal fan

Doormat (5'x3')

Dust bin

Shock treatment chart

Danger board

Shut down / Break down board (Bi-lingual Hindi & English)

HT Hand Gloves

Wall Clock

Insulated electrical Plier Taparia

D-Spanner Set Taparia

3 cells Torch

Pipe wrench, 12" Taparia

First aid Box

Earth chain brass 12 mtr. Length

5 KV Megger Digital reputated company make

2.5 KV Megger Digital reputated company make

Earth Megger Digital reputated company make

Rubber mat 1 mtr. wide x 2 mtr long and 12 mm thick to withstand 11 KV dielectric strength as per IS 5424-1969 along the all equipments in Control Room.

Carbon dioxide (CO2) type fire extinguishers conforming to IS 2878-1976 and cylinders fully charged of 4.5 Kg capacity.

Foam type fire extinguishers, Portable type 5 lit capacity hanged on wall with bracket complete as required.

Metal Fire bucket Filled with sand

Fire bucket stand of Jhuggi type of MS angle 50x50x6 mm with top covered by MS sheet 2 mm. thickness and Duly painted with red color including cost of all material, fabrication etc. complete work

9KV, 10KA lightening arrestor

LT Control Cable -4C x 2.5 Sq. mm.

LT Control Cable -6C x 2.5 Sq. mm.

LT Control Cable -10C x 2.5 Sq. mm.

Cable Aluminium 3Cx120 sq. mm. XLPE 11KV

Cable jointing kit outdoor type suitable for 3Cx120 sq. mm. XLPE cable 11 KV

Cable jointing kit indoor type suitable for 3Cx120 sq. mm. XLPE cable 11 KV

12.65KV 3000KVAr 3 phase 50hz housed in outdoor type IP 5X CRCA Panel Capacitor bank having three variable step of 900KVAr & one variable step of 300KVAr.Bank shall be complete with capacitor units of 200/100KVAr,Aluminium busbars,Pin and Post Insulators,HRC fuse etc.outdoor type CRCA Panel shall be accomdating capacitors,Series Reactor, Vaccum contractor,Surge supperesor,Fuses, RVT etc.Outdoor type CRCA Panel shall comprising the following- (i) 11KV Aluminium wound,Dry type Series reactors (a) 0.2% for 300KVAr step- 01 No . (b) 0.2% for 900KVAr step- 03 Nos. (ii) 11KV 3 phase dry type RVT-01 No. (iii) 12 KV 3 phase Indoor type metal enclosed Vaccum Capacitor- 03 Nos (one for each step) (iv) Capacitor Banks (a) 300KVAr - 1 Set (b) 900KVAr - 3 Sets

11KV,630Amp off load Isolator with earth switch and mounting structure

Indoor type automatic power factor controller

11KV Outdoor VCB switchgear alongwith complete arrangement for connection

Indoor type control and relay panel

Lugs/thimble junction box, 2 nos cable support structure etc.

Cable box of 2mm thick CRCA sheet of dimension 1000x600x500mm (HXWXD) with associated accessories like bus bars,insulators,holding clamp for cable etc.

CT outdoor with mounting structure (1Set=3 Nos)

GI Earthing strip 35x6mm

Electrode Chemical earthing for equipments

33KV, 3 Pole, 1250A Line Isolator with earth switch

33KV, 3 Pole, 1250A Bus Isolator

33KV Outdoor type CT 600/300/1-1-1A with Junction Box

ACSR Panther conductor for Bus Bar & making connection

2Cx2.5mm LT control cable

4Cx2.5mm LT control cable

6Cx2.5mm LT control cable

33 KV 1250A 3 Phase O/D type VCB 24 V DC

33 KV Disc Insulator Polymer 70 KN, B & S Type

Disc fitting for Dog 70 KN

GI strip for Earthing 50x6mm

GI strip for Earthing 45x5mm

T-connectors Panther to Panther for busbar

Connectors suitable for Panther For LA suitable for Panther

Connectors suitable for Panther For Isolator suitable for Panther

Connectors suitable for Panther For CTs suitable for Panther

Connectors suitable for Panther For VCB suitable for Panther

MS Plate 400x400x8 mm.

Stone pad 300x300x75 mm.

33KV Line Material

ST POLE SP-72 13 mtr Long (Bottom portion Hot Dip Galvanised)

33KV straight/L type x arm 125x65 mm

MS Channel 125x65 mm

MS Angle 65x65x6mm

33KV 10 KN Polymer Pin Insulator With Pin

33KV Polymer Disc Insulator (B & S) type

33KV Disc fitting (B & S) type for panther Conductor 90KN

Stay Set GI 20X1800 mm

Stay wire 7/8 Swg

Earthing Rod 20x2500 mm

GI Wire 5mm/6 SWG

GI Wire 8 SWG

ACSR Panther Conductor

Earth wire 7/1.6mm 16 SWG

MS Angle 75x75x8mm

MS Angle 50x50x6mm

Cable AL 3X400 Sq.mm XLPE 33KV

Cable jointing kit for 33 KV XLPE 3x400 Sqmm Outdoor

MS Channel 100x50mm

Top channel clamp with bolt & nuts

Supporting clamp for top channel

Earth wire clamp with nut & bolt

E-clamp with nut & bolt

Bolts & Nut

Stone Pad

Danger Board with clamp

Number plate with clamp

Barbed wire

PG clamp for panther conductor

Bracing set clamp 135mm

Bracing set clamp 165mm

Stay clamp with nut & bolt

Bolt & nut 150x12mm

Eye Bolt 190x16mm with nut

Stay insulator of size 140x85mm

Bolt & nut OS

Clamp for holding cable made of MS flat 50x6mm

GS strip 50x6 mm

Holding PP Clamp with nut& Bolt

Straight Through Cable jointing kit for 33 KV XLPE 3x400 Sqmm

PP & clamps with nut & bolt

11KV Line Material

ST Pole SP-55 (BPHD)

11 KV Polymer Pin Insulator

11 KV V Type X arm

11 KV Polymer Disc Insulator

11 Kv Disc Fitting B&S Dog/Racoon 70 KN

MS Channel 100x50 mm.

MS Angel 65x65x6 mm.

Stay Set 16x1800 mm.

Stay Wire 7/10 SWG

MS Earthing Rod

ACSR Dog Condutor

LT XLPE Cable 1X70 Sq. mm

Cable AL 3x300Sq. Mm XLPE 11 KV

T/F 63 KVA 11/0.4 KV( For 33/11 KV S/S)

11 KV Jointing Kit For 3x300Sq.mm.11 KV XLPE Cable (I/D)

11 KV Jointing Kit For 3x300Sq.mm.11 KV XLPE Cable (O/D)

Earth Wire GI 7/1.6mm 16 SWG

GI Wire 5mm/6 SWG

X-Arm Holding Clamp For ST Pole SP-55 With N/B

F-Clamp For ST Pole SP-55 With N/B

Stay Clamp SP-55 With N/B

Stay Insulator

Earth Wire Clamp For ST Pole ST-55

Danger Board With Clamp & N/B

Wriebed Wire

Double Pole Clamp For Top Channel With N/B

Bracing Set Clamp For Double Pole With N/B

Nut & Bolt Off Size

Warbed wire clamp with N/B

HT Tape

Allu. Lugs 70Sq. Mm

Description of Work / Item(s)

Amount

Testing of S/s

EARTH MAT & DELTA EARTHING OF 33/11 KV SUB-STATION

Excavation of earth

Straightening and laying of Earth mat of 32 mm M S round 0.6 mtr or 1 mtr deep in mixed soil according to drawing or as per UPCL direction or/and as per site requirement. Making T-joints, cross joint and Lap joints by welding of M S round bar together using cleats of MS Angles 65x65x6 mm, chipping the slag and painting of the joints with black bitumen paint (including supply of paint) to avoid rusting. Cutting & making electrode 2.5 mtr long with conical pointed bottom and driving of the electrode in ground so that the top of electrode remains 450 mm below ground level. Backfilling of soil in trenches, ramming and leveling of trench properly after completion of eartmat and earthing work is complete. Making of Delta/Bridge earthing for structure/panels i.e. 33 KV LA, 11 KV LA, 33 KV panels, 11 KV panels, ACDB, DCDB, Neutral of power & station transformer.

Earthing of structures using G.I. strips including strengthening, cutting, bending & welding with structure and equipments.

Special earthing by digging 6mtr deep pits providing 6mtr GI pipe 45mm dia,40kg char coal,10Kg common salt,5kg copper sulphate,2 CI earth plate 450x450x20mm and making contact with GI Strip 50X6mm including supply of all material and T&P.

Earthfilling in yard

Supply and spreading of 75mm thick layer of Gravels of size 20mm to 25mm.

TOE WALL AND SECURITY FENCING (WIRE MESH FENCING) AROUND THE SWITH YARD OF 33/11 KV SUBSTATION

Excavation of mixed soil

RR 1:6 below ground level

CC 1:2:4 on top of RR masonary

Brick work, 1:4

Cement Plaster 1:4

Fabrication and Erection of stays post of 40x40x5 mm angle 2.5 mtr long. with required CC 1:4:8 work of size .5x.5x.5

Fabrication & Erection of RS Joist 175x85x6mm for fixing of wire mesh gate including grouting of the pillar.

Erection of wiremesh fencing with 4mtr and 1mtr wide gate.

Painting of stays with one coat of red oxide paint and two coat of Bus green paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of red oxide, paint.

Erection of TERMINAL GANTRY WITH LA AT 33/11 KV SUB-STATION

Fabrication of T.G. Structure complete .

Excavation of earth in mixed soil for foundation

Cement concreating in 1:3:6

Cement Plaster 1:4 on top & side walls

Erection of T.G. with LA

Painting of structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of all material.

Erection of ONE SET OF LINE ISOLATOR AT 33/11 KV SUB-STATION

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Cement concreting in 1:3:6 ratio

Cement Plaster 1:4, on top & side walls

Erection charges of isolator structure

Erection charges of line isolator complete by assembeling, fixing of operating handle, pins etc for smooth operation of the isolator.

Painting of structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of all material.

Erection of ONE SET OF BUS ISOLATOR AT 33/11 KV SUB-STATION

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Cement concreting in 1:3:6 ratio

Cement Plaster 1:4, on top & side walls

Erection charges of isolator structure

Erection charges of line isolator complete by assembeling, fixing of operating handle, pins etc for smooth operation of the isolator.

Painting of structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of all material.

Erection of 33 KV V.C.B. AT 33/11 KV SUB-STATION

Excavation of earth in mixed soil for foundation of CB stand

Grouting of CB stand with C.C. in 1:3:6 ratio

Cement Plaster 1:4, on top & side walls

Fixing and erection of structure & circuit breaker

Painting of structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of all material.

Erection of ONE SET OF CT AT 33/11 KV SUB-STATION

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting of structure with C.C. in 1:3:6 ratio

Cement Plaster 1:4, on top & side walls

Erection charges of CT structure

Fixing and erection of CT

Painting of structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of red oxide, paint.

Erection of ONE SET OF 33 KV FUSE SET AT 33/11 KV SUB-STATION

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting of structure with C.C. in 1:3:6 ratio

Cement Plaster 1:4, on top & side walls

Erection charges of structure

Fixing and erection charges of Fuse set

Painting of structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of all material.

Erection of ONE SET OF 33KV L.A. AT 33/11 KV SUB-STATION

Fabrication charges of structure as per approved drawing

Excavation of earth in mixed soil

Grouting of structure with C.C. in 1:3:6 ratio

Cement Plaster 1:4, on top & side walls

Erection charges of structure

Fixing and erection charges of Lightening arrestor

Painting of structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of all material.

Erection of BUS BAR GANTRY AT 33/11 KV SUB-STATION

Fabrication charges of gantry as per drawing.

Excavation of earth in mixed soil

Cement concreting in 1:3:6 ratio in sand and mortar

Cement Plaster 1:4, on top & side walls

Erection charges of Bus Gantry

Painting of structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of all material.

Erection of ONE SET OF PT AT 33/11 KV SUB-STATION

Fabrication charges of MS item

Erection charges of structure

Fixing and erection of equipments.

Painting of structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of all material.

Construction of power Transformer Plinth.

Fabrication of Rail 90 Lbs, cutting of MS angle 50x50x6 mm and MS Bar 12 mm

Excavation of earth in mixed soil

Brick work in 1:4

Plaster in 1:4

Erection of 12.5 MVA, 33/11 KV POWER TRANSFORMER

Shifting of transformer from road side to transformer plinth through chain pully, lift pully and slippers etc.

Erection of transformer by fixing all accessories, tank, filling of transformer oil etc.

Fabrication & erection of neutral structure including excavation & grouting in CC 1:4:8

Erection of 33/0.433KV,63KVA Station Transformer.

Excavation of earth

Cement concreting of Double pole 1:4:8

Cement Plaster in 1:4

Fabrication charges of channels

Erection of Double pole complete with all fittings, channels etc. complete work

Labour charge for pit digging 0.6mtr below GL for earthing rod making delta for T/F neutral and then welding with GI strip and taking out 1 for T/F Neutral ,1 for T/F Body and 1 for L.A. including cost of welding and N&B.

Painting of structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of red oxide, paint.

Erection of 33/0.433 KV station transformer on double pole with all accessories complete work

Laying, spreading & jointing of LT cable by using propers ties, lugs, connectors, cable glands in cable trench and equipments..

Digging open trench 120cm deep and 45cm wide and prepare 10 cm thick fine sand cushion and then Laying of 33KV 3X400Sqmm cable over this cushion,then covered the cable with another 10cm thick sand layer.The trench is then covered with brick and other material covering all around cable protected on sides and top as per site requirement.

Filling/Fixing of cable jointing kit 33 KV indoor and outdoor type

Erection of vertical 33 KV bus isolator on double pole SP-33 complete by assembeling, fixing of operating handle, pipe, clamps, pins etc for smooth operation of the isolator.

Erection of 33 KV fuse set on double pole SP-33.

Erection of DOUBLE POLE STRUCTURE OF OUTGOING FEEDER

Excavation of earth

Cement concreting of Double pole 1:4:8

Cement plaster in 1:4

Febrication charges of channels & angle

Erection of Double pole complete with all fittings, accessories, stays & earthing.

Erection of BUS BAR & CONNECTORS AT 33/11 KV SUB-STATION

Fixing of Flexible copper connection on neutral bushing of power & station transformer .

Labour charges for drawing bus-bar & making connection in each equipment, main & auxilary bus bar.

Erection of 33KV C&R Panels.

Cartage of panels from road side to SGR

Placing of panels on specific place over SGR trench on MS Channels and fixing of pannels with nut & bolts.

Making electrical connection of panels by control wiring complete with VCB etc.

Erection of 11KV VCB Panels.

Fixing and erection of 11 KV Panels

11 KV CABLE LAYING AT SUB-STATION

Laying of 11 KV Cable by excavation of cable trench in mixed soil, filling of the sand upto the height 250mm from the bottom most level of the cable trench thereafter properly laying of the cable by placing bricks on both side of the cable than re-filling of the sand from the top so as to cover the cable completely and then placing the bricks on the top of the covered cable, spreading of cable warning tape & covering of the trench completly with mixed soil including cost of sand, bricks, etc.

Fixing of cable jointing kit 11 KV indoor & outdoor type

Fabrication charges of MS items

LAYING LT CONTROL CABLES & CABLE TRENCH AT SUB-STATION

Making cable trenchin size 45x40cm including fabrication, fixing of MS angle 45x45x6 mm size (excluding the cost of MS Angle/ MS bar) on side edge with all excavation, CC work, brick work, fixing of cable support angle one/two tier as required with stopper arrangement at 0.5 mtr gap throughout the length of the trench, making of cable trench covers with MS Bar welded mesh angle frame of MS angle 40x40x6 mm. with lifting hooks, fixing of perforated tray complete as per drawing including cost of sand, cement, bricks, metal (gitti) etc.

Laying, spreading & jointing of LT control cable by using propers ties,lugs, connectors, cable glands in cable trench and equipments..

Erection of LIGHTING ARRANGEMENT AT YARD AND S.G. ROOM

Excavation of earth

Cement concreting in 1:4:8 ratio

Cement plaster in 1:4

Erection of ST Pole SP-10 and fitting of accessories.

Erection of 85watt lighting equipment & all its accessories.

Laying of LT PVC cable 4x10 sq. mm. in soil & back filling of sand.

Fixing of Digital Timer with all its controllling accessories for automatic opration of street light.

Erection of MISC. ITEMS OF SUB-STATION

Erection of 24 V Battery charger

Erection of 24 V Battery set Maint. Free

Erection of DCDB 24 V

Erection of ACDB

Erection of Name plates, instruction board, SLD, Max., Min. board etc.

Erection of substation name board by grouting in CC 1:4:8 ratio

Fixing/placing of T&P and Furniture at Substation.

Fixing, placing and erection of T&P and furniture material

Fire Protection at Substation

Installation/Mounting of Fire Extinguishers

Installation of Capacitor Bank.

Earth work

Brick work 1:6 Sub Structure

Brick work 1:6 Super Structure

Cement plaster 1:6 (12mm thick) on plinth

Steel Reinforcement

Fixing and erection of capacitor bank with complete accessories.

Fixing and erection of 11KV,630Amp off load Isolator with earth switch and mounting structure

Fixing and erection of Indoor type automatic power factor controller

Fixing and erection of 11KV Outdoor VCB switchgear including fixing of all cable joint

Filling of cable jointing kit 11 KV indoor & outdoor type

Cable trench in size 30x20cm for laying of power/control cable including cost of all material.

Laying of power and control cable in trench including all connections.

Erection work of 33 KV 'Bay' for 33KV Outgoing Line

Fabriction of all Structure such as Terminal Gantry,CT,Bus Isotalor,Line Isolator.

Erection of all Structure such as Terminal Gantry,CT,Bus Isotalor,Line Isolator,Meter Cubical.

Making cable trench.including fabrication, fixing of MS angle 40x40X5 mm in sze 50x30cm including the cost of MS Angle/ MS bar on side edge with all excavation, CC work, brick work, fixing of cable support angle one/two tier as required with stopper arrangement at 0.5 mtr gap throughout the length of the trench, making of cable trench covers with MS Bar welded mesh angle frame with lifting hooks, fixing of perforated tray 200 mm width complete as per drawing including cost of perforated tray,sand,cement, bricks, metal (gitti) etc.

Labour charges for drawing bay & making connection in each equipment, main & auxilary bus bar.

Excavation of earth in mixed soil for foundation of CB stand

Grouting of CB stand with C.C. in 1:3:6 ratio

Cement Plaster 1:4, on top & side walls

Fixing and erection of 33KV Vaccum circuit breaker

Laying, spreading & jointing of LT control cable by using propers ties,lugs, connectors, cable glands in cable trench and equipments..

Painting of all structure with one coat of red oxide paint and two coat of Aluminium paint of best quality I.S.I. mark Dulux, Burger, Asian make including cost of paint.

Erection work of 33KV Line Excavation of earth pit for following structure

Single pole Support of ST Pole SP-72

Double pole Support of ST Pole SP-72

Tri pole Support of ST Pole SP-72

Four pole Support of ST Pole SP-72

Stud pole of ST pole SP-72

Erection of following Structure Complete With all Fitting & Accessories

Single pole Support of ST Pole SP-72

Double pole Support of ST Pole SP-72

Tri pole Support of ST Pole SP-72

Four pole Support of ST Pole SP-72

Grouting of Poles in cc 1:4:8 Cement ,sand,20mm gauge stone ballast (0.45x0.45x1.8)-(3.14x0.075x0.075x1.8)x2

Muffing of pole in 1:3:6 cc size of (0.45x0.45x0.4)-(3.14x0.075x0.075x0.4)x2 mtr

Fabrication charges of MS channel and angle

Exacavation of earth for stay pit of size 0.6x0.6x1.5mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the exacavated soil and disposet of surplus exacavated soil as directed complete work.

Grouting of stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling.

Fixing, tightening and nozling of stay wire with pole & stay rod.

Earthing of support with MS earth rod of 2.5mtr long including exavation of pit 0.6mtr below ground level and ramming of MS rod upto full length and connection the earht electrode with polle by GI wire and nut & bolt

Labour charges for gaurding.

Laying,sagging & stringing of 3-Phase 4-Wire overhead line by ACSR panther conductor & 7/16 SWG earth wire with route clearence.

Painting of structure with one coat of red oxide and two coat of Aluminium paint including cost of paint.

Single pole Support of ST Pole SP-72

Double pole Support of ST Pole SP-72

Tri pole Support of ST Pole SP-72

Four pole Support of ST Pole SP-72

Stud pole of ST pole SP-72

Cable stand erection

Exacavation of earth in all type of soil 4x0.6x0.6

Febrication Charges

Grouting of cable stand in CC 1:3:6 (0.6X0.6X4) including muffing.

Earthing of cable stand structure with making triangle GI Strip bridge including supply of all material.

Painting charges of cable stand complete with one coat of red oxide and two coat of Aluminium paint.

D/Ckt 33KV Underground Cable laying

Fabrication Charges of MS items

Digging open trench 120cm deep and 45cm wide and prepare 10 cm thick fine sand cushion and then Laying of 33KV 3X400Sqmm cable over this cushion,then covered the cable with another 10cm thick sand layer.The trench is then covered with brick and other material covering all around cable protected on sides and top as per site requirement.

Making trench with trenchless technology for 33KV at road crossing with laying of D/Ckt cable in HDPE Pipe/GI Pipe.

Laying of cable for loop etc.

Supply and Laying of of HDPE pipe 160mm outer dia,6mm thickness.

Supply and fixing of GI Pipe (with Socket) 4or 5 inch dia at points of road crossing, cable rising etc ( B Class)

Fixing of 33KV 3core XLPE Outdoor cable jointining kit of 400 Sqmm

Fixing of MS Channel,Holding clamp for cable support.

Making pit of size 5X2X2 mtr for filling and fixing of 33KV Straight through joint kit with back filling,ramming and compaction upto complete restoration.

Erection of stud stay with complte fittings

11 KV New Feeder Line

Cartage of different line material from Haldwani/ Rudrapur Store Center of UPCL to store approximate. Distance 50Km to 90Km including loading and unloading into truck and unloading at JE store Dump and carriage dump store to pit site.

a) ST Pole SP-55

b)T/F 63 KVA 11/0.4 KV

c) Other Small Matiril

Erection of following ST Pole SP 55 including digging of pit size 0.6x0.6x1.50mtr and with fitting of all accessoriies. Grouting of Pole in cc 1:4:8 & back filling with soil & boulder earthing of Pole complete work

a) Single Pole

b)Double Pole

c) Four Pole

Digging of Pit For Stay & Grouting of Stay in CC 1:4:8 with Binding Nozling of Stay Wire with Stay Clamp Complete Work

Sagging of 11 KV Line in dog conductor Including Fitting of All Accessories Binding / Jumpring Complete Work ( Single circuit )

Sagging of 11 KV Line in dog conductor Including Fitting of All Accessories Binding / Jumpring Complete Work ( Double circuit )

Sagging of earth wire including fitting of earth wire clamp

Fixing of danger board on Single , Double and Four Pole structure including fitting of clamp complete work

Fixing of warbed wire including fitting of warbed wire clamp complete work

Laying of 11 KV XLPE cable 3x300 sq mm in trunch including digging of trunch pit And covered of cable with first class bricks &back filling of trunch with sand and soil complete work

Mounting of 63 KVA T/F on D/P structure including fitting of accessories and earthing of T/F neutral and body complete work

Painting of Pole structure with 1 coat of red oxide and 2 coat of aluminium paint complete work

Insured Carriage of Power Transformers from Electricity Store Center to substation site including safe loading, unloading at nearest point of the transformer plinth. (Rates to be given for the distance of 60 Kms. Actual payment shall be done on per Km. basis on given rates.)

Description of Work / Item(s)

Amount

Construction of S.G.R. Building and Other misc. civil works at 33/11 KV S/S,Chini Mill, Sarkada, Sitarganj (U.S.Nagar).

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.

Supplying and stacking at site.Good earth

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :sand: 3 graded stone aggregate 20 cm nominal size).1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting propping etc. and removal of form for: Foundations footings, bases of columns, etc. For mass concrete.

Centering and shuttering including strutting propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering including strutting propping etc. and removal of form for: Shelves (Cast in situ)

Centering and shuttering including strutting propping etc. and removal of form for: Lintels, beams, plinth beams girders, bressumers and cantilevers,

Centering and shuttering including strutting propping etc. and removal of form for:. Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting propping etc. and removal of form for. Weather shade, Chaffas, corbels etc. including edges.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood 35 mm thick

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsmatched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws etc. complete : 200x10 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws etc. complete : 150x10 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish (Barrel type) with necessary screws etc. complete : 100x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :(200x10mm)

Providing and fixing aluminium tower door bolts ISI marked anodised (Anodic coating not less than grade AC 10 as per IS:1868)transparent or dyed to required colour or shade with nuts and screws etc. complete: (150x10mm)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100mm

Providing and fixing aluminium handles floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary scerews etc. complet: Single rubber stopper

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge:Profile B Fixing with adjustable lugs with split end tail to each jamb

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge:Profile C Fixing with adjustable lugs with split end tail to each jamb

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard rawing.surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate20mm nomnal sxe stone aggregate).

Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 oarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complet

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (75mm diameter)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.( 110mm diameter)

12mm cement plaster of mix: 1:4 (1cement : 4coarse sand)

12mm cement plaster of mix: 1:6 (1cement :6coarse sand)

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer.

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing terminal guard : 75 mm Sand cast iron S&S as per IS - 1729

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.External work 40 mm nominal outer dia Pipes

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making ecessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(15 mm nominal bore)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

P/Fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.All types of soil 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.100 mm nominal size dia

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.100 mm nominal size dia

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Engaging suitable Beldar for petty works (Basis rate labour)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. GROUP B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2*2.5 Sq.M*1*2.5Sq.M

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2*4 Sq.mm + 1x4 Sq.mm earth wire

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including nnections but excluding modular plate etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required..

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted ncluding earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supply and Installation 40mm outlet size submersible pump set 1.00HP, VI stage of crompton greaves or equivalent make as approved by E.I.

Supply and Placing single phase panel board/ box crompton greaves make or equivalent make as approved by E.I.

Supplying of 20 Watt LED Tubelight Philips or equivalent make as approved by E.I.

"Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. file no-E-9059857/9(new technology)/C.E.(Ren.)CSQ/2019 Dated-18/11/2019"

Supply and Installation Water Purifier (15LPH) kent or Equivalent make approved by E.I. S.E. letter no-1154 /ECC/D.Dun/Extra Item Dated-15-11-2022

Supply and Placing 20/40 LTR Storage Water Cooler SS Body USHA make or Equivalent make approved by E.I. S.E. letter no-1154 /ECC/D.Dun/Extra Item Dated-15-11-2023

Supplying of Exhaust Fan 450 mm sweep of Orient or equivalent make as approved by E.I. S.E. letter no-832 /ECC/D.Dun/Extra Item Dated-29-08-2022

Supplying of Exhaust Fan 250mm sweep of Orient or equivalent make as approved by E.I. S.E. letter no-832 /ECC/D.Dun/Extra Item Dated-29-08-2022

Description of Work / Item(s)

Amount

(Land Development Work)

Earth work in excavation by mechanical means (Hydraulic excavator ) manual means in foundation tranches (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. (All kinds of soil).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:4 :8 (1 Cement :4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20 cm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete working beams, suspended floors, roofs having slope up to 1.5 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral/ stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting propping etc. and removal of form for:. Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting propping etc. and removal of form for: Lintels, beams, plinth beams girders, bressumers and cantilevers,

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (T MTbars ).

Brick work with F.P.S. Bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

steel work welded in built up sections/ framed work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer susing structural steel etc. as required. (In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.)

12mm cement plaster of mix: 1:6 (1cement :6coarse sand)

15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1cement :6coarse sand)

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coats applied @ 1.67 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved prand and manufacture.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Centering and shuttering including strutting propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be aid for separately).Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Supplying and stacking at site.Good earth

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Suppy of Stone Aggregate (Single size) : 20 mm nominal size

Engaging suitable Beldar for petty works

Omkar Electricals

Mishrilal Associates Pvt. Ltd.

Capital Electech Pvt Ltd

Omkar Electricals

Mishrilal Associates Pvt. Ltd.

Capital Electech Pvt Ltd

S. T. ELECTRICALS PVT. LTD.

Capital Electech Pvt Ltd

Omkar Electricals

S. T. ELECTRICALS PVT. LTD.

Capital Electech Pvt Ltd

Mishrilal Associates Pvt. Ltd.

Capital Electech Pvt Ltd

Mishrilal Associates Pvt. Ltd.

Omkar Electricals

Bidder Name

Omkar Electricals