WBMAD/AKM/HC/Z-III

Amount

House Service Connection Upto Consumer premises with MDPE pipes of required dia. and necessary Accessories Complete in all Respect including Water Meter along with NRV for Zone III within Ashokenagar Kalyangarh Municipality under AMRUT Water Supply Project.

Work includes Providing Supply, Installation, Fittings, Fixing, Testing and Commissioning of House Water Supply Connections, with MDPE Pipe 20mm dia., & P.E. Compression EF fittings 20mm, Excavation, all short of Bituminous / Concrete Road Up to depth of D.I. Distribution Pipe line, Cuttings Fittings, Fixing, MDPE / P.E. pipe fittings up to Meter Box, inside/outside, to consumer premises average 12 mtrs, Including permanent restoration of the existing Bituminous / Concrete/Brick pavement/Paver Block road to its original condition ,damages of Under Ground Drainage line, Electrical lines, Tele phone lines other water supply line, Crossing drain line through G.I. (Medium) Casing pipe Including Leakage Testing, supply of MDPE Pipes 20mm dia. PE 100, PN 16, 12 Mtrs. (Average), PE Both side Compression Elbow 90 deg. 2 nos. PE one side Compression other side SS insert F thread, Elbow 90 deg. 1 nos. P.E. Adopter with SS inserts M/F Thread-Compression 2 nos. PE Compression Ball Valve, (excess quantity of fittings should be provided as per site condition), 1 no. Ferrule of Gunmetal Confirming to IS 2692/1984 (reaffirmed 2005) 1 no. NRV 1no. P.E. Meter Box/ Cabinet with Common Lockable Key, Length 325mm, Width 245mm, Height 175mm. Suitable for Cover Meter, PVC Ball Valve, Back filling with Silver sand over Ferrule up to Road Level and also remove surplus Earth from Road side in case of Ferrule situated on road flank but in case of ferrule situated on road, back fill with silver sand to be done over ferrule up to bottom of sub-base layer and the road need to be restored to its original condition and also the surplus earth from road need to be removed, including Supply, Delivery, unloading and proper staking and proper installation at site of 15mm dia. MultiJet type Water Meter 1 no. Must be AMR Computable, Class B, +/- 2%, IS 779 / ISO 4064, Admissible Pr. Max. 16 Kg/Cm² 360 0 Orientable, CybalCoumputable, Magnetic transmission drive, Cooper can Mineral Glass 5mm Thik Envelop, Extra dry Dial, Totalizer, Protection Class IP 68, Strainer Inbuilt, MID Certification Marked, Certificate from weights measures, with Brass Nuts & Nipples. Water Meter Typical Performance. i)Starting flow :- ≤10 L/Hr. ii) Accuracy from +/- 5% :- 30 L/Hr. iii)Accuracy from +/- 2% :- 120 L/Hr. iv)Max. Flow +/- 2% :- 3000 L/Hr. Vendor list approved by P.H.E. Dte. Vide no. 20110-125/80/I/2011 Dated 02.12.2011 of C.E. (Mechanical-Electrical) &Chairperson, BOA of vendor enlistment Committee P.H.E. Dte. (Execution as per direction of EIC). fixing of meter as per direction of EIC. House Water Supply Connection Through 20mm dia. MDPE Pipes. Meter Specification as per the NIT

S & P ENTERPRISE

S ENTERPRISE