Construction of stage open gym expansion of messs hall in all respects at womens polytechnic college

Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work (APSS No. 402)

Plain Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402)

ReFilling with excavated earth in trenches, sides of foundations & basement from approved quarry in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming, including all operational, incidental, labour charges, hire charges of T & P etc. complete including cost and conveyance of sand for finished item of work. (APSS No 309 & 310).

Filling with gravel in trenches, sides of foundations & basement from approved quarry in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming, including all operational, incidental, labour charges, hire charges of T & P etc. complete including cost and conveyance of sand for finished item of work. (APSS No 309 & 310).

Vibrated Reinforced Cement Concrete M-20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) For Footings

Above plinth beam

Ground Floor Lintels

Ground Floor For SUN SHADES

Roof Beams: Ground floor :

Roof Slab 115mm thick GF

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.

Supplying , fitting and placing HYSD / TMT bar reinforcement in VRCC works complete as per drawings and technical specifications for bars below 36mm dia including over laps and wastage,where they are not welded including cost and conveyance of steel , binding wire etc., lifting charges of steel , placing in position, tying with binding wire , all tools etc., complete for finished item of work

Plastering 12mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903)

Plastering to Ceiling 12mm thick in single coat in CM(1:3) including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903)

Supply of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/ risers of steps with Supply of Double charged / multi charged stain free full body porcelain vitrified tiles screen printed and thickness between 8-10mm 1st quality, length equal to flooring stones set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.

Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for internal walls.

Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for external walls.

Supply and fixing of ISI mark 25mm dia 2.2mm thick PVC conduit pipe Sudhakar/ Macoplast/ Modi make concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.

Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR P.V.C. insulated ISI Copper Cable GM/L&T/RPG/Havells/V-Guard/Power Flex/Polycab/Gold Medal/ Standard /Milion/ Vimal/ Suncab/ Paragaon/FortuneArt make in the existing metallic / non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Buildings

Supply and 2of 36/0.3mm (2.5 sqmm) FRLS/ HFFR PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes KEI / Polycab/ Havells /GM / Million/ HPL / Gold Medal / Power Flex/ RPG/ Anchor / Sun Cab / Fortune Art / Great white.

Supply and fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Supply and errecting ceiling fan of Crompton / Orient atom make as per IS 374 - 1979 and with 3 blades and double ball bearings and with condenser AC 250V 50 C/S of 48" 1200mm sweep completely erected in position without regulator, canopy down rod up to 301.80 mm in length is provided with hook/clamps nuts and bolts and 24/02 flexible copper wire etc., complete and pointed with lettering by enamil paint the Sr. No. and date of errection including cost and conveyance of all materials and labour chargers etc., complete including 4% tornover tax on cost of all materials for finished item of work.

Roofing with 6mm Thick Corrugated A.C Sheets fixing with G.I J bolets & Nuts 8mm Dia G.I Plain washers etc complete but excluding cost of purlings,rafters and trusses .

CHEST PRESS DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 3.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 2.5mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 2.5mm are of heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns ionized coated and zinc dipped joint with Mig welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm.

TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 3.00mm, Standing twister plate support pipe shall be minimum of 80mm NB dia of thickness not less than 2.5mm, Bottom frame support shall be minimum of 32mm NB dia of thickness not less than 2.5mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 2.50mm are of heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with Mig welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion.

4 Pole Sky Walker main frame shall be minimum of 100mm NB dia of thickness not less than 3.0mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 2.5mm are heavy grade of TATA/JINDAL make with hot dipped galvanised joint with Mig welded with Plastic/Rubber grips on top end. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty NTN/SKF bearings should be reputed make and press fitted for smooth rotation, and does not require relubrication i.e., maintenance - free ball bearing

TAI CHI SPINNER / FORE ARM TWIRL DOUBLE with center pipe shall be of minimum 100mm NB dia of thickness not less than 3.00mm, Support frame shall be minimum of 32mm NB dia of thickness not less than 2.5mm & TAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 2.50mm are of heavy grade of TATA/JINDAL make with hot dipped galvanized with Mig welded Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless.

Rower - Main frame made from GI pipes are 114 mm, Foundation Plate – M S round plate of 220 mm and 10 mm thickness, handle 42 mm and 13 mm G.I Pipes, the paint is Para coating, long pipe closing cap – G.I Material.

Cross Trainer : Heavy Duty GI Pipe Outdoor Park/Gym Cross Trainer Exercise Equipment /Outdoor Elliptical Exerciser/Main Heavy Gi Pipe , Powder Coating Frame, maximum weight capacity100 kg

Back Extension Machine: 4/2 GI Frame Non-slip footrest-Adjustable for different height (Min 4 adjustments) requirements, maximum weight capacity is 100 kg

Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15cm layers finishing top surface to the required level curing etc., complete for finished item of work (APSS No. 402)

Plain Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402)

ReFilling with excavated earth in trenches, sides of foundations & basement from approved quarry in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming, including all operational, incidental, labour charges, hire charges of T & P etc. complete including cost and conveyance of sand for finished item of work. (APSS No 309 & 310).

Filling with gravel in trenches, sides of foundations & basement from approved quarry in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming, including all operational, incidental, labour charges, hire charges of T & P etc. complete including cost and conveyance of sand for finished item of work. (APSS No 309 & 310).

Vibrated Reinforced Cement Concrete M-20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) For Footings

Above plinth beam

Ground Floor Lintels

Ground Floor For SUN SHADES

Roof Beams: Ground floor :

Roof Slab 115mm thick GF

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.

Supplying , fitting and placing HYSD / TMT bar reinforcement in VRCC works complete as per drawings and technical specifications for bars below 36mm dia including over laps and wastage,where they are not welded including cost and conveyance of steel , binding wire etc., lifting charges of steel , placing in position, tying with binding wire , all tools etc., complete for finished item of work

Plastering 12mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903)

Plastering to Ceiling 12mm thick in single coat in CM(1:3) including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903)

Supply of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/ risers of steps with Supply of Double charged / multi charged stain free full body porcelain vitrified tiles screen printed and thickness between 8-10mm 1st quality, length equal to flooring stones set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.

Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for internal walls.

Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for external walls.

Supply and fixing of ISI mark 25mm dia 2.2mm thick PVC conduit pipe Sudhakar/ Macoplast/ Modi make concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.

Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR P.V.C. insulated ISI Copper Cable GM/L&T/RPG/Havells/V-Guard/Power Flex/Polycab/Gold Medal/ Standard /Milion/ Vimal/ Suncab/ Paragaon/FortuneArt make in the existing metallic / non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Buildings

Supply and 2of 36/0.3mm (2.5 sqmm) FRLS/ HFFR PVC insulated 1100V grade as per IS:694/1990 specification for copper cable of makes KEI / Polycab/ Havells /GM / Million/ HPL / Gold Medal / Power Flex/ RPG/ Anchor / Sun Cab / Fortune Art / Great white.

Supply and fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Supply and errecting ceiling fan of Crompton / Orient atom make as per IS 374 - 1979 and with 3 blades and double ball bearings and with condenser AC 250V 50 C/S of 48" 1200mm sweep completely erected in position without regulator, canopy down rod up to 301.80 mm in length is provided with hook/clamps nuts and bolts and 24/02 flexible copper wire etc., complete and pointed with lettering by enamil paint the Sr. No. and date of errection including cost and conveyance of all materials and labour chargers etc., complete including 4% tornover tax on cost of all materials for finished item of work.

Roofing with 6mm Thick Corrugated A.C Sheets fixing with G.I J bolets & Nuts 8mm Dia G.I Plain washers etc complete but excluding cost of purlings,rafters and trusses .

CHEST PRESS DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 3.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 2.5mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 2.5mm are of heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns ionized coated and zinc dipped joint with Mig welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm.

TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 3.00mm, Standing twister plate support pipe shall be minimum of 80mm NB dia of thickness not less than 2.5mm, Bottom frame support shall be minimum of 32mm NB dia of thickness not less than 2.5mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 2.50mm are of heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with Mig welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion.

4 Pole Sky Walker main frame shall be minimum of 100mm NB dia of thickness not less than 3.0mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 2.5mm are heavy grade of TATA/JINDAL make with hot dipped galvanised joint with Mig welded with Plastic/Rubber grips on top end. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty NTN/SKF bearings should be reputed make and press fitted for smooth rotation, and does not require relubrication i.e., maintenance - free ball bearing

TAI CHI SPINNER / FORE ARM TWIRL DOUBLE with center pipe shall be of minimum 100mm NB dia of thickness not less than 3.00mm, Support frame shall be minimum of 32mm NB dia of thickness not less than 2.5mm & TAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 2.50mm are of heavy grade of TATA/JINDAL make with hot dipped galvanized with Mig welded Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless.

Rower - Main frame made from GI pipes are 114 mm, Foundation Plate – M S round plate of 220 mm and 10 mm thickness, handle 42 mm and 13 mm G.I Pipes, the paint is Para coating, long pipe closing cap – G.I Material.

Cross Trainer : Heavy Duty GI Pipe Outdoor Park/Gym Cross Trainer Exercise Equipment /Outdoor Elliptical Exerciser/Main Heavy Gi Pipe , Powder Coating Frame, maximum weight capacity100 kg

Back Extension Machine: 4/2 GI Frame Non-slip footrest-Adjustable for different height (Min 4 adjustments) requirements, maximum weight capacity is 100 kg

Estimated Contract Value (ECV) put in to Tender in Rs.

Deduct tender Premium @ % Less

The Estimated Contract Value (ECV) items (01) to (35) of the work "Construction of Stage, Open Gym, Expansion of Mess Hall in all respects at Women’s Polytechnic College, Nerellavalasa Colony Road, Bheemunipatnam Constituency, Visakhapatnam District" is for Rs.16,55,771 /- (Rupees Sixteen Lakhs Fifty Five Thousand Seven Hundred and Seventy One only)