CA NO.CWE BLY/ GE (E) /15 OF 2025-26SPECIAL REPAIR TO PANT ROAD AND RANI LAXMI BAI ROAD APPROX LENGTH 400 RM AT SHAHJAHANPUR CANTT UNDER GE(EAST) BAREILLY

M&L repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat with bituminous primer VG-10 @ 5 kg per 10 sq m, putting in premix bituminious macadom well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cum of stone chipping, 6.3mm size), again well rammed (including supply of premixed macadam, binder and chipping) depth of potholes exc 30 mm complete all as specified and directed.

M & L for preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirft etc complete all as specified and directed.

M & L for applying evenly a priming/tack coat with bituminous primer @ 05 kg per 10 Sqm using 80/100 paving bitumen VG 10 grading all as specified and directed.

M&L for Premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note :(i) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications)

M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tone power roller to required compaction complete all as specified and directed. Note :(i) Design Mix for SDAC shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate. (ii) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications) Note for item No. 4 & 5: Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 40/- per kg of bitumen (less consumed) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 110mm x 120mm x 24mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

M &L for preparing bituminous surface of road marking 2.5mm thick centre lines, dashes, arrows letter, marking etc and the like not exdc 10 cm wide on new surface or previously treated road surface with hot applied retro-reflective thermoplastic road marking paint (white/golden/yellow) conforming to NORTH (clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160% including cleaning and drying the existing road surfaces to ensure dust,oil,grease and mosisture free surfaces before applying the paint complete all as specified and directed.

Demolition Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons etc (each layer) complete all as specified and directed,.

M & L Brickwork with sub-class 'B' bricks on edge walls (less than 1/2 brick thick) built in 1:4 as in bern complete all as specified and directed.

M & L 75 mm thick (compacted thickness) water bound meccadam (WBM) with coarse aggregates of grading (Granite trap or Basalt) 2 (63 to 40mm size) or of grading (50 to 20mm size), spread, rolled and consolidated to gradient, camber, level and super elevation with 8 to 12 tonne power roller, complete all as specified and directed.