PROVISION OF HIGH SECURITY WALL ALONG WITH CONCETRINA COIL AND AREA DEVELOPMENT AT 03 ACRES PORT LAND OF ICGS KAKINADA

Amount

Excavation over area n.exc 1.5m in depth, for foundation etc., or for shafts, wells, cesspits, manholes, pier holes, etc., n.exc 10 Sq.m on plan and getting out in soft/loose soil complete all as specified and as directed.

All as per item no.1.00 above but exceeding 1.5 M depth but n exc.3.0 M depth, complete all as specified and as directed.

Removing excavated soils not exceeding 50 M and depositing where directed at a level not more than 1.50 m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soil complete all as specified and as directed.

Material and Labour for Crushed stone dust filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and Labour for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Material and Labour for 50mm thick Plain Cement Concrete Type B 1 1:2:4 (using 20 mm graded stone aggregate) in base of wall complete all as specified and as directed.

Material and Labour for Walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.

Material and Labour for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete all as specified and as directed.

Material and Labour for Hardcore broken stone or boulder to gauge exc 63mm and n exc 100mm for filter complete all as specified and as directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls,75 mm dia complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exc. 6m mean radius in built in CM (1:6) complete all as specified and as directed.

Material and Labour for RCC M-30 (design mix) using 20mm graded stone aggregates in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Material and Labour for RCC M-30 (design mix) using 20mm graded stone aggregates in columns, pillars, piers, posts and struts complete all as specified and as directed .

Mataerial and Labour for RCC M-30 (design mix) using 20mm graded stone aggregates in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material and Labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished concrete surfaces complete all as specified and as directed.

Material and Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square or rectangular or ploygonal for fair finished concrete surfaces complete all as specified and as directed.

Material and Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. for fair finished concrete surfaces complete all as specified and as directed.

Material and Labour for rendering 15mm thick on fair faces of brick work/pcc blocks or concrete surfaces with cement mortar 1:4 including mixing of liquid water proofing compound, finished even and smooth without using extra cement complete all as specified and as directed. Note: Rate of liquid water proofing compound will be paid separately under respective item.

Supply only liquid water proofing compound.

Material and Labour for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of cement base primer, complete all as specified and as directed.

Material and Labour for Corrosion resistant TMT bars 10 mm dia. and over of grade Fe-500, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips as in reinforcement complete all as specified and as directed.

Material and Labour for Corrosion resistant TMT bars 5 mm to 10 mm dia. of grade Fe-500, cut to length, bent to shape required, in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Supply & Fixing of Mild steel work as in posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

Material and Labour for Preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and Labour for Preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of black japan paint articles in contact with concrete or masonry complete all as specified and as directed.

Supply & Fixing of galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., complete all as specified and as directed( each line wire measured separately.

Material & Labour for MS Pre-fabricated 5.50M wide, 3M high MS gate (with wicket gate) made out of MS angle irin MS sheet and MS square bars including pinta lhinges, RCC columns, necessary earthwork.etc complete all as pecified and as directed.

Material & Labour for MS Pre-fabricated 5.50M wide, 3M high MS gate (without wicket gate) made out of MS angle irin MS sheet and MS square bars including pinta lhinges, RCC columns, necessary earthwork.etc complete all as pecified and as directed.

Supply and fixing of CONSECZAL super razor punch barb tape (SRPBT) aluminium base helix coil with and include necessry GI Fixing clips for securing complete all as specified and as directed with following specification : (i) Dia of coil (unstreched-600 mm) (ii) No of circle- 51 turns per coil (iii) weight of each coil with hessian pack 8.5 kg (iv) coverage per coil -8 RM (v) cental core wire: made from 2.6 mm dia GI H.T.SS wire as per IS-4454 galvanised as per IS-2629 (vi) Razor punched strip:-Razor punched tape is CONSECZAL steel comprising of AL base with Zinc alloy @ 150gm/M2 confirming to ASTM-729/A-729M with additional primer treatment of epoxy/Polyurethane & final paint top coat of qualified green shade (BSL 139) by Hot dipping process complete all as pecified and as directed.

Material & Labour for Moorum/red bajri, good earth ( procure from outside MOD land) filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with power roller exc 8 tonne & n exc 12 tonne.

Spreading and levelling (soils) in layers n exc. 25 cm thick in floor complete all as specified and as directed.

Dismantaling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precastconcrete articles, complete all as specified and as directed.

Dismantaling of RCC of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Dismantaling of Structural steel of any descripition , complete all as specified and as directed.

Removing of Barbed wire fencing of any descripition, complete all as specified and as directed.

SVS PROJECTS

Sai Sri Constructions

JAI ENTERPRISES

P SRINIVASA RAO

srisampathassociates

M/s Saptagiri constructions