SPECIAL REPAIRS AND REPLACEMENT OF EXISTING WOODEN PANELING WITH PVC PANELING AND REFITTING OF ELECTRICAL FITTINGS IN NEW AUX BAY AT EKSILA AND AS AS AND SPECIAL REPAIRS TO BATHROOMS P1E ADJACENT TO MACHINE SHOP WELDING BAY AND AC BAY TOILETS AT IN

Amount

Taking down aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets light fitting etc. and making good the disturbed surface on walls floors complete all as specified and directed .

M & L for Point wiring with PVC insulated unsheathed multistranded copper conductor cable FRLS grade of size 1.5 Sqmm (nominal area) 1100V grade drawn through and including Concealed PVC conduit of size 20mm dia medium grade including accessories fixed on wall/floor/roof, etc including provision of pressed mild steel terminal box with (surface/concealed) white modular cover plate and frame of suitable size for fixing modular switches, sockets, etc including provision of PVC insulated, unsheathed multistranded copper conductor FRLS grade of size 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly suitable for One light / fan point / Bell point controlled by one, one way switch including taking down old point wiring with fittings & fixtures complete all as specified and directed. [Note: Quoted rate is deemed to be inclusive for necessary cutting chases in walls / floors / ceiling of any description, pinning in making good to disturbed surfaces where required and pointing in cement mortar 1:3 and finished to match with existing finishes complete]

All as per item No 2 above but for one socket outlet, three pin, 5/6 Amp, independent complete all as specified and directed..

All as per item No 2 above but, one socket outlet, three pin, 5/6 Amp, on the sameboard complete all as specified and directed..

All as per item No. 2 above but for 15/16Amp switch socket out let, independent with 4.0 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified and directed.

Supply and fixing Modular switch 1 way 6A, 1 module single pole complete all as specified and directed .

Supply and fixing Modular switch 1 way 16A, 1 module single pole complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65 x 30 mm with 3 terminals complete all as specified and directed .

Supply and fixing of modular Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified and directed.

Supply and fixing of modular Socket 6A/16A - 2/3 pin combined 2 module, 230 volt, multipurpose, complete all as specified.

Supply and fixing of modular Fan step regulator, 120W - 2 module complete all as specified and directed.

S & F LED tube light fittings, retro bar professional WH 5700K to 6200K and minimum 1800 lumens of cool white comprising of batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed.

S & F LED mirror light fittings, 2 feet long of minimum 900 lumens of cool white wall mounted batten with all accessories internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including taking down old fittings complete all as specified and as directed

S & F Building Security light LED type of minimum 3000 Lumens Pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size including bracket made of 40mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and as directed .

Supply and fixing of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 04 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified and directed.

Supply and fixing of Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt, 12 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified and directed.

Supply and fixing of MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and directed

Supply and fixing of MCB 6 to 32Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, , complete all as specified and directed

Taking down Exhaust fan of any size from its position and doing complete overhauling of fan including replacement of fan clamp and split pin, rubber bush, replacing fan capacitor of 4.0 mfd ,painting with one coat of synthetic enamel paint over a paint of red oxide primer refixing the same after repairs complete all as directed by Engr-in-Charge. Note :- Rewinding shall be measured and paid separately under relevent items. .

Rewinding of Exhaust fan motor of any sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, etc. complete all as specified and directed

M&L Earthing complete with GI plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected with Galvanize earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No 5, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel complete all as specified and directed including testing on completion.

M&L for 4mm GI wire for earthing connection to building including all fittings and accessories, complete all as specified and directed.

Removing any type of light fittings and fixture of any capacity, keeping in safe custody and refixing the same in same location or other after necessary B/R work all as directed by Engineer-in-charge.

Supply and fixing of MCB 40Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, , complete all as specified and directed

M&L for sub main wiring with two runs of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6.0Sq mm drawn through and including PVC concealed conduit of 25 mm dia, includingtaking down of old sub main wiring complete all as specified. Note: 3 runs of Copper conductor 6 sqmm along with PVC concealed conduit shall be measured as one length

M&L for sub main wiring with two runs of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0Sq mm drawn through and including PVC concealed conduit of 25 mm dia, includingtaking down of old sub main wiring complete all as specified. Note: 3 runs of Copper conductor4 sqmm along with PVC concealed conduit shall be measured as one length

S & F modular power unit of capacity 20 Amps complete for ACs with a two pin and earth plug and socket complete with one MCB, SPN, 20 Amps, 240 volts, 'C' curve, 10 KA complete all as specified and directed.

Taking down ceiling fan from its position and doing complete overhauling of fan including replacement of fan clamp and split pin, rubber bush, 02 no canopy, fan capacitor of 2.5mfd, painting with one coat of synthetic enamel paint over a paint of a coat of red oxide primer refixing the same after repairs complete all as directed .

Labour only for Taking down MES ACs of any type (Split/Window) any capacity 2.0/1.5) indoor/outdoor unit including voltage stabilizer complete after disconnecting from supply mains and restoring the refrigirient gas and sealing the copper pipe line, complete all as specified and directed by Engineer in Charge and refixing the same after necessaary concrete, plastering and painting work on walls complete all as specified. Note -(i) It is the responsibility of the contractor to keep the AC units in safe custrody during the exicution of work. (ii) Any damaged to existing AC units done during taking down and refixing process has to be borne by the contractor and nothing extra shall be admissible on this account.

Taking down existing wall paneling of any type and removing to store complete all as specified and directed.

Providing and injecting post construction Anti Termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete as specified and directed.

S&F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

Rendering 5 mm thick in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed

Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting over a coat of primer, complete all as specified and as directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and directed..

Taking down of chowkats or frames exc 1.5 sqm but n. exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and directed..

M & L for Plain cement concrete type C1 (1:3:6) (using 20 mm graded crushed stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast, bed plates and the like including form work, weathering, slightly rounded or chamfered angles and throating as required complete all as specified and directed..

M & L for brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) including demolition of old brick work complete all as specified and directed..

M & L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) including demoiltion of old brick work complete all as specified and directed..

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed..

Cutting holes in brick walls exc half brick but n. exc full brick wall in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S & F 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed..

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat moulded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheetas for top rail lock rail & bottom rail on either side complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tubecomplete all as specified and directed.

S/F brass hinges 100mm size extruded with stainless steel pin type D-11 complete all as specified and directed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F 200 mm mild steel barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed..

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed..

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed..

S&F mild steel hold fast made out of MS flat iron for chowkats and other small articles including making shape, drilling hole etccomplete all as specified and directed.

Precast cement concrete 1:2:4, type B1( Using 20mm graded crushed stone aggregate) in landings, cover slabs, cooking slab, shelves and similar articles with plain faces and set in cement mortar 1:4 including demolition of old concrete complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M & L for 50mm thick plain cement concrete type B1, (1:2:4) (using 20 mm graded crushed stone aggregate) in flooring/plinth protection including finishing the surface even and smooth without using extra cement complete all as specified and directed..

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match including dismantling of old tiles complete all as specified and directed..

M & L for Coloured Glazed ceramic designer tiles 450X 350X 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement morter (1:4) including dismantling of old tiles complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement including taking down of old cement plaster complete all as specified and directed..

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions (WPC shall be measured & paid separately) including taking down of old cement plaster complete all as specified and directed..

M&L fo Rendering 5 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement including taking down of old cement plaster complete all as specified and directed.

Supply only liquid water proofing compound of approved qualitycomplete all as specified and directed.

M & L for preparation of new wood or wood based surfaces of any description not otherwise described, over 10 cm width or girth & applying with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed..

M & L for preparation of old wood or wood based surfaces of any description not otherwise described, over 10 cm width or girth & applying with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed..

M & L for preparation of old decorated plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots) and applying two coat of white wash complete all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc l0cm girth in stone, concrete block and concrete slab upto 2nd floor complete all as specified and as directed.

Supply and fixing Unplasticised PVC pipes of 15 mm dia pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc including all fittings and making connection with old GI tube/pipe using suitable section complete leakproof complete all as specified and directed

Supply and fixing Unplasticised PVC pipes of 20 mm dia pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc including all fittings and making connection with old GI tube/pipe using suitable section complete leakproof complete all as specified and directed

S/F PP-R Gate valves (brass insert) of 50mm dia with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed

S/F PP-R Gate valves (brass insert) of 20mm dia with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed

S&F 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), Triple layered, including taking down existing tank complete all as specified and directed

S&F in repairs 20mm dia ball brass valves,high pressure,with polythane float and flynut complete,screwed for iron pipe or brass ferrule complete all as specified and directed .

S & F in repairs Single lever Basin Mixer cast copper alloy, chromoum plated with central hole for WHB, Fancy type 15 mm bore with 450 mm long braided hose & base flange complete as per Jaquar cat No. CON-167 KNB or its equivelent in Marc, Cera, parryware etc complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs Fancy type 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and Fixing in repairs 15mm Bore bib tap cast copper alloy chromium plated fancy type with crunch or butterfly handle screw down scrwed for iron pipe or for brass funnel and fixed in repair complete all as specified and as directed.

S & F in repairs Fancy type 15 mm bore Stop valves, chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and Fixing in repairs stop valves, fancy type, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for long iron pipe or for unions and fixed Complete all as specified and as directed.

S&F in repairs Health faucet with 1 m stainless steel flexible tube , wall hook, non return valve complete all as per Jaquar Catalouge No ALD-585 or its equivelent in Marc, Cera, parryware etc complete all as specified and directed

S&F in repairs 125mm dia stainless steel gratings with waste hole of min weight 100 gms complete all as specified and directed

S&F in repairs Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms) complete all as specified and directed

S & F in repairs 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan- necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

PVC (SWR) floor trap 100 dia complete all as specified and directed

S&F in repairs Vitreous Ware wash down water closet (Pedestal), white (ETWC) and fixed in repairs including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, 10 ltrs capacity flushing cistern low level white with inlet, ball valve, float and handle including brackets and flush pipe and taking down excisting flush

S & F in repairs Vitreous China Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S & F in Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including supplying and fixing 5 litres, Cast Iron, automatic Flushing cistern and flushing pipe cistern with brackets complete all as specified and directed.

Removal of debris to a distance of 5 KM including loading and dumping/ levelling at the destination complete all as specified and directed

M&L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls complete all as specified and directed.

M & L for treatment of damp proof top surface of old damp wall surfaces external/internal by removing the top plastered surface and applying damp proof smart care/pedecrete of approve make like pedelite/Dr. Fixit/Asian and equivalent in 02 coats as in following steps: (a)Applying first coat in longitudinal direction and let it be dry for 3-4 hours. (b) Applying second coat in transverse direction and let it be dry for 2-3 hours. The mixing of damp proof material shall be done with water, cement/ wall putty/ white cement or suitable chemical all as specified and directed by manufacturer instuctions. The material shall be approved by GE before use in work

PRATIMA ENGINEERING WORKS

CIVILEC ENGINEERING WORKS

G V REDDY & CO