Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L2₹35.2 L+₹1.6 L (4.68%)Rejected-Finance 205 PARSHAV VIHAR PLOT NO 50 1 P EXTN PATPARGANJ DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L3₹36.6 L+₹2.9 L (8.72%)Rejected-Finance C 3 SHAHDANA COLONY BAREILLY 243005 | BAREILLY | BAREILLY | UTTAR PRADESH | 243005 | L3 | Rejected-Finance Over all rates are higher than L-1. | |
| 4 | L4₹37.4 L+₹3.8 L (11.2%)Rejected-Finance 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Over all rates are higher than L-1. | |
| 5 | L5₹37.9 L+₹4.2 L (12.6%)Rejected-Finance GE WEST BAREILLY | L5 | Rejected-Finance Over all rates are higher than L-1. |
Tender Value
₹46.5 L
EMD Value
₹93,000
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST BAREILLY
GE WEST BAREILLY
SPECIAL REPAIRS TO JCO/OR GOVT MD ACCN BLOCK NO 143/08 CLYDE BK, 73/04, 73/07, 74/02 AND 74/03 AT LOKHART LINE, PROVN OF ALUMINIUM PARTITION OF IN (FOYER PORTION) MH UNDER AGE B/R - I OF GE WEST BAREILLY.
2023_MES_614654_1
8146/C/E8
Open Tender
Civil Works
Item Rate
180 days
GE WEST BAREILLY
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST BAREILLY
₹93,000
Yes
26 Sept 2023
19 Aug 2023
11 Sept 2023
19 Aug 2023
9 Sept 2023
4 Sept 2023
Amount
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) and removing from site and making good the disturbed portions of walls in Cement Mortar 1:4 complete all as specified and directed.
Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and making good the disturbed portions of walls in Cement Mortar 1:4 complete all as specified and directed.
Demolition and breaking up drain pipes of 100 mm bore (salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.
M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 including Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.
M & L for rendering (on internal surfaces) 15 mm thick cement plaster on fair faces of brick work or on other than fair faces concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement including taking cement plaster complete all as specified and directed.
M & L for rendering (on external surfaces) 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement with mixing of water proofing compound including taking cement plaster complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified.
M & L for rendering 5 mm thick cement plaster on cement concrete surfaces of ceiling with cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper and applying 2 mm thick putty by washing rubbing down and stopping of ditempered and painted surfaces complete all as specified and directed
M & L for preparation of old plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper and applying 2 mm thick putty by washing rubbing down and stopping of ditempered and painted surfaces complete all as specified and directed
M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of 2 mm thick wall care putty complete all as specified and directed.
M & L for preparing old plastered wall surfaces and applying one coat of cement base paint over one coat of 2 mm thick wall care putty complete all as specified and directed.
M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M & L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
M & L for providing 25 mm thick cement concrete 1:2:4 type B-0, using 12.5 mm graded in floors, finished rough to receive floor tiles complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
All as per S.No 17 above but in Vertical Surfaces and over 10 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
M & L for glazed ceramic white tiles 350 mm X 250 mm X 7 mm thick or 450 mm X 350 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for 18-20 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish, rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
S & F of 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including formwork, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with round bull nosing edging including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L for 75 mm thick cement concrete 1:3:6 type C-1, using 20 mm graded stone aggregate as in plinth protection finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 12 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.
S & F of 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary filling and compaction with PCC (1:3:6) type C-1 using 20mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plates etc including wooden texture finished paint on the frame surface complete all as specified and directed
S & F of 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary filling and compaction with PCC (1:3:6) type C-1 using 20mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plates etc including wooden texture finished paint on the frame surface complete all as specified and directed
S & F steel windows with pressed steel frame (size 95 x 45 x1.25mm) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar (open outside) and wire gauge openable shutter without glazing bar (open inside) dovetailed or welded complete all as specified and directed. Note (i) Two Shutters i.e, wire gauged and glazed shall be fixed in one composite frame and both shutters shall be measured as one unit. (ii) Rate for filling PCC in frame deemed to be included in quoted rates (iii) MS Grill shall be measured and paid seperately under relevant item of schdeule.
S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. confirming to Fe-410-W (Grade E-250) Quality 'B', drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening complete all as specified and directed.
S & F of factory made steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.
S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed.
S & F of 4 mm thick E board classic (everest / equivalent) tiles for insulation and accoustic purpose 60 x 60 cm with and including powder coated galvanium iron snap grid with 32 x 25 x 1.5 mm thick tee section and 32 x 25 x 1.5 mm thick angle section with all hanging / supporting arrangements as in false ceiling complete all specified and directed.
S & F of 40 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed.
S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.
S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.
S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of old wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M & L for preparation of old steel surfaces over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
S & F of 300 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S & F of 300 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.
S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.
S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part-I and hoisted, fixed in positio, including Dismantling of water tank exc. 250 Litre but not exc. 500 Litre capacity complete all as specified and directed.
S & F in repair of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.
S & F in repair of 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including taking up or down 15 mm bore steel water tubing and connection complete all as specified and directed.
S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including taking up or down 20 mm bore steel water tubing and connection complete all as specified and directed.
S & F in repairs Vitreous China wash basin white, flat back size 580 x 450 mm including waste coupling brass, waste pipe, chain and plug and porcelain stopper, brackets complete all as specified and directed.
S & F in repair of 15 mm bore brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.
S & F in repair brass Chromium plated wall mixer 3 in 1, 15 mm for mixing hot & cold water screwed down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed.
S & F in repair fancy type 125 mm size square brass CP shower rose with or without swivel joints complete all as specified and directed.
S & F in repair of 15 mm bore bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repair of 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.
S & F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed.
S & F in repair of 20 mm dia brass chromium plated tubular towel rail ‘D’ type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.
S & F in repair water closet vitreous china squatting pan ‘Orissa’ pattern size 580 X 440 mm white with integral foot rests including flushing cistern 10 litres low level and flush pipe including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.
S & F of 140 mm dia grating round of PTMT (minimum weight 50 gram) complete all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S & F Stainless Steel Plate Rack of overall size 31'' x 30 '' x 10'' made with 0.63mm stainless steel thick sheet complete all as specified and directed. Make Bluestar, Silvershine, Nirali
S & F in repair 1 mm thick stainless steel sink with drainage board Kitchen or laboratory type with plug washer and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size of sink 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm complete all as specified and directed.
Dismantling of corrugated or semi corrugated asbestos cement sheets in roof covering complete all as specified and directed.
S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section), including distance pieces, cleats etc. confirming to Fe-410-S including cutting, welding etc. complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F stainless steel curtain rod 20mm dia of 1 mm thick of approved quality with two number decorative design as approved brackets fixed in brick / concrete wall and same finished knobs on each end of curtain rod complete all as specified and directed.
M & L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough, over 2mm thick sand cushioning, complete all as specified and directed.
M & L for 80 mm thick, M-40 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and including 25 mm thick sand cushioning complete all as specified and directed.
M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.
M & L for Aluminium anodised, coloured powder coated door chowkats with one or more rebate using section of size 101.60mm x 44.75mm x 3.18mm with jointing cleats for fixing etc fixed to wall including taking down old existing door frame of any description complete all as specified and directed.
M & L for Aluminium, anodised, coloured powder coated chequred girll weight n. exc 0.50 kg per sqm fixed with aluminium adnodised strip all around of window including taking down old grill or mesh of any description complete all as specified and directed.
M & L for Aluminium, anodised colour powder coated (shade as approved) partition wall with frame made of standard sec 83.50 x 44.45 x 2.11mm, 49.91 x 44.45 x 2.01mm sash bars fabricated as per site requirement section having vertical and horizontal rail including jointing cleats, aluminium anodised snap beading screws, PVC packing. 5.5mm thick tinted glass complete all as specified and directed.
S & F of double action heavy duty floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass and other parts made of mild steel heavy duty complete all as specified and directed.
S & F of Aluminium extruded section body door closer hydraulically regulated designation No. 3, universal type suitable for door shutter 851 to 1000 mm in width and 61 to 80 Kg in weight suitable for aluminium doors complete all as specified and directed.
S & F of 100 mm size four levers, brass mortice lock, vertical type complete all as specified and directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed.
S & F in repairs factory made PVC cupboards frame of the size 75 mm x40 mm with a wall thickness of 5 mm made out of extruded 5 mm thick plain /prelam PVC sheet of density 600kg /cbm, having bottom width of 50 mm and thickness of 10 mm . All four frame lenghts reinforced with 15 mm x 15 mm M.S.square tubes of 19 guage thickness throughout the frame and mitre cut at two corners adjointed with 2 nos of 15 mm long brackets of 10 mm x 10 mm M.S. square tubes. The door frame shall be fixed to the wall using 8/100 long MS screw through the frame by using PVC fastners. A minimum of 4 Nos. of screws to be provided for each vertical members and manufacture's specification and drawing complete all as specified and directed.
S & F of factory made PVC cupboards flush type shutter of 30 mm thick consisting of frame made out M S tubes of 19 guage thickness and size 19 mm x 19 mm for stiles and rails.The inside panels shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm thick plain/prelam PVC sheet, on both side of inside panels including 75 mm stainless steel hinges, 100 mm long handles and 18/20 mm curtain rod not less then 6mm long including bracket made of anodised aluminium necessary item to fix the shutters to frame such as and magnetic ball catch for each pair of shutters. All four edges of the panels to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton (made by stiking 2 Nos. PVC foam sheet of 5 mm thickness using PVC solvent cement adhesive including locking arrangements for shutters) complete all as specified and directed
S & F Powder coated aluminium frame for doors, windows, ventilators, Partition with one or more rebates including joining cleat for fixing etc with powder coated complete all as specified.
S & F of Aluminium section powder coated of colour as approved doors frame and shutters partly with 4.8 mm thick reflective glass and partly closed with 5 mm thick aluminium composite panel (alco panel) fixed with aluminium chamfered clip section No. 4407 of aluminium door sections as under. (a) Frame 100x40x2mm section No. 2420 (b) Shutter style 85x44.45x1.7mm thick section 4546 (i) Top rail 14.30x44.45x1.7mm thick section 4553 (ii) Middle rail 83.50x44.45x1.7mm thick section 4565 (iii) Bottom rail 114.30x44.45x1.7mm thick section 4529 (iv) glazing clip powder coated 0.7mm thick section No. 4407 (v) Handle stainless steel 300mm long as approved (vi) Tower bolt powder coated 9.90 mm dia & 200mm long section No. 4002 (vii) Mortice lock 100mm 7 lever all as directed of Godrej make (ix) Rubber gasket white PVC (x) Namda rope to be fixed in the styles's groove for proper air tightness. (xi) top guide rail to be provided as per requirment to withstand adequate load of shutter to be installed at site for easy movement of shutter.
M& L for Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed etc complete all as spd and directed.
M & L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as directed.
S & F 5 mm Aluminium composit panel of approved colour fixed to frame work or door etc complete all as spd and directed.
S & F Sheet glass tinted /reflective 4.8 mm thick (of any tint) or fixed and complete all as specified and directed
S & F of mild steel work as in framed brackets of not exc. 10 Kg each made of angle or Tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, riveting etc Fe-290 Grade E-165 complete all as specified and directed.
M & L for providing plain cement concrete type B-0, 1:2:4, (using 12.5 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
M & L for cutting opening in cement concrete walls (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc complete all as specified and directed.
Taking down unservicable carefully aluminium / copper point wiring (light point, fan point, socket outlet point or power point) any type (batten, casing-N-caping, surface conduit or concealed conduit) complete with and including fittings and fixtures such as switches, ceiling rose, pendent, lamp holder, regulator, switch, socket outlet, shade conical etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and distemper / white wash / colour wash etc. complete all as specified and directed.
M & L for point for One light point / fan point (Independent point), controlled by one, one way switchwiring with 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded copper conductor cable (FRLS) drawn into and including non-metallic PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed with and including necessary chase cutting on brick / stone masonry walls and making good as per existing and sunk cast iron or 1.2 mm thick pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded copper conductor cable (FRLS) as in earth wire and connecting all metal parts to common earth dolly complete all as specified and directed.
All as per item No. 101.00 hereinbefore but one bell buzzer / bell point controlled by push button on the same board complete all as specified and directed.
All as per item No. 101.00 hereinbefore but wiring for one 3 / 6 pin 5 Ampere socket outlet point on independent board complete all as specified and directed.
All as per item No. 101.00 hereinbefore but wiring for one 3 / 5 pin 5 Ampere socket outlet point on the same board, controlled with other switches complete all as specified and directed.
All as per item No. 101.00 hereinbefore but wiring for one 3 / 6 pin 15 Ampere socket outlet point on independent board and wiring using with 2.50 sqmm size cables complete all as specified and directed.
All as per item No. 101.00 hereinbefore but wiring for one 15 Amp 6 Pin Switch Socket Point on independent board and wiring using with 4.00 sqmm FRLS PVC Unsheathed Copper Conductor Single core multi stranded incl 4.0 Sqmm FRLS PVC Conductor Single Core used as earth continuity conductor complete all as specified and directed.
S & F of switch piano flush button single pole 230 volts, one-way 15 Ampere complete all as specified and directed.
S & F of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.
S & F of switch piano flush button single pole 230 volts, one-way 5 Ampere complete all as specified and directed.
S & F of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), flush type 250 volts AC complete all as specified and directed.
S & F of switch piano flush button single pole 230 volts, Two-way 5 Ampere complete all as specified and directed.
Supply and fixing of bell push button type single pole one-way 5 Ampere complete all as specified and directed.
Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet complete all as specified and directed.
S & F of electronic type fan regulator 230 volts, step type, socket type, hum free 100 / 300 watt capacity complete all as specified and directed.
S & F of ceiling rose three phase, PVC / polycarbonate isolated body complete all as specified and directed.
S & F for in repairs Distribution board (DB) IP 42 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper bus bar neutral bar earth bar ,single pole and neutral 240 volts ,flush to wall complete for fixing of MCBs, Isolators etc complete all as specified and directed
S & F in repair MCB, type Curve 'C', 10KA, SP, 6 to 32 Amps complete all as specified and directed
S & F in repair MCB, SPN, type Curve 'C', 10KA, P, 40 Amps, 240 Volts complete all as specified and directed
S & F in repair, LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 20 Watt for soft diffuser lighting with and including lamp and connecting up complete with PVC insulated and PVc Sheathed round flexible three core copper conductor cable of suitable size and testing on completion complete all as specified and directed
S & F in repair, LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 10 Watt for soft diffuser lighting with and including lamp and connecting up complete with PVC insulated and PVc Sheathed round flexible three core copper conductor cable of suitable size and testing on completion complete all as specified and directed
S & F LED lamp 7 watt complete all as specified and directed
S & F lamp holder PVC type complete all as specified and directed
S & F Bulkhead fitting LED type 9 Watt complete all as specified and directed
M & L for in repair earthing complete with galvanised iron earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:2:4 type B-1, GI protection pipe light grade 15 mm bore including testing on completion of job complete all as specified and directed.
Taking Down Ceiling Fan of any size and place in safe custody by the contractor complete all as specified and directed
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed
Taking down meter of any make and keeping in safe custody by the contractor and re installation after completion of rewiring complete all as specified and directed
S & F of 1100 volts grade heavy duty 4.00 Sqmm size two single core PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 20 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 4.0 Sqmm size stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.
M & L for rewinding of ceiling fan with copper wire including replacement of bearing, greasing and painting with white paint complete all as specified and directed.
Supply and fixing surface mounting LED light fitting aluminium extruded T-5 batten, 20 watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed.
S & F Indoor decorative LED city-3 light fitting suitable for & including single 9 watt LED lamp with polycarbonate body with upper globe complete all as specified and directed.
S & F of 1100 volts grade heavy duty 6.00 Sqmm size two single core PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 6.0 Sqmm size stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.
S & F MCCB, Triple pole and Neutral, 10 KA, 160 Amps, 415 Volts, Type 'C' curve complete all as specified and directed
S & F MCB, type Curve 'B', 10KA, SP, 6 to 32 Amps complete all as specified and directed
S & F MCB, SPN, type Curve 'C', 10KA, P, 40 Amps, 240 Volts complete all as specified and directed
S & F in repairs Distribution board (DB) IP 42 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar earth bar ,single pole and neutral 240 volts ,flush to wall complete for fixing of MCBs, Isolators etc complete all as specified and directed
Supply and fix flush sheet metal enclosure VTPN DB 4 way 415 V with double door protection detachable gland plates, flushh mounting for provn of MCCB 160 Amps fitted with bus bar, earth bar and neutral links complete including taking down old unservicable all as specified and directed.
S & F of wall fan 400 mm sweep with all fiittings and fixtures , with copper wounded motor and oscilating mechanism 220 V 50 HZ complete all as specified and directed
Supply, installation, commissioning hi wall split units indoor/outdoor complete with cordless remote control unite in built Heating and Cooling arrangment and digital inverter twin rotary of capacity 1.5 TR single phase 240 volt, 50 Hz complete all as specified and directed
Supply, and fix voltage stabiliser for automatic operation, single phase naturally air cooled indooe type and designed for inpput variation between 130 volt V with output voltage stablized at 230V accuracy of (+/-) 2.5% and of capacity 4 KVA complete all as specified and directed
S&F AC modular box with Top plug and MCB 20 Amps incl moodular box for mounting etc cap 20 Amps univversal complete all as specified and directed
Supply, fixing and testing of 300 mm sweep exhaust fan single phase 230 volts complete with all accessories and self closing typed louvers as per makes as given in particular specification including Making electric connection with two single core 0.50 Sqmm size stranded copper conductor cable of suitable length as per site requirement complete all as specified and directed.
Supply and fix Water heater storage type, electric , capacity 25 litres, BEE 5 star rated complete all as specified and directed.
S & F of 15 mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F PVC Connections 15mm size with PTMT Nuts of length 900 mm complete all as specified and directed.
Supply, laying and testing UG cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm, 4 core fixed on wall / floor with fixing arrangement such as saddle, clips, etc complete all as specified and directed.
S & F of 1100 volts grade heavy duty 4.00 Sqmm size two single core PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 20 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 4.0 Sqmm size stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.
S & F of 1100 volts grade heavy duty 16.00 Sqmm size two single core PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 16.0 Sqmm size stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.
S&F Modular Switch one way 10A, 1 Module complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED Lamp suitable for roof ceilling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
S & F Triple pole and earth encolsure with a three pin and earth pllug with socket complete with one triple pole MCB TPN 63 Amps 415 V 50 HZ C complete all as specified and directed.
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in hard / dense soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
M&L for sand cushioning with layer of sand 8 cm thick before lying of cable and 15 cm after lying of cable in trenches, punning complete all as specified and directed. Note:- Punning thickness of 18 cm will be considered for payment.
M & L for laying brick as in protection covers over cables using sub class 'B' old size bricks laid flat, length wise perpendicular to the axis of cable complete all as specified and directed.
Supply, laying and testing UG cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 Sqmm, 3.5 core fixed on wall / floor with fixing arrangement such as saddle, clips, etc complete all as specified and directed.
Supply and installing and testing and replacement cubical type LT feeder piller box outdoor type CPRI certified facotry made cubical type weather and vermin proof ( dimension not less then 600 x 900 x 300 mm) fixed on and including ventilation and louvers covered with perforated sheet having holes of diameter less then 1 mm, required PPC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation is required/ suitable size with angle iron frame with size 50x50x6 mm, 3 phase 4 wire 415 volts 50 HZ fabricated out of 3.15mm thick CRCA having seven tank treatment process for powder coated with suitable gasket and keeping adequate working space inside of the box (outer with of the box is not less than 45 cm and gap between bus bar not less than one inch) and double door with front and rear opening with handle including locking arrangment as directed before manufacturing the panel including taking down of old U/s panel complete. One number incoming MCCB 160 Ampere 36 KA with multiple outgoing provision ( Min 4 Nos. ) suitable for up to 240 x 3.5 core cable connection and aluminium bus bar of cap 400 Amps incl multifunctional meter with 3 phase indicating lamp complete all as specified and directed.
M & L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
Demolition of cement concrete (reinforced) in roof, slab, floors, (other than ground floor), beams, staircase, landing, chajjas, and similar works complete all as specified and directed.
Taking down old ceiling board any description and size complete all as specified and directed.
NOTE- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
SANJEEV ENTERPRISES
hardeep singh enterprises
Mohit Enterprises
Goel Enterprises
novell engineers
UTTRAKHAND BUILDERS
M/S Alam Construction Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .