FABRICATION, SUPPLY AND INSTALLATION OF L SHAPED WORKSTATIONS AND MOBILE PEDESTALS IN SECOND FLOOR THEJASWINI BUILDING TECHNOPARK PHASE I CAMPUS, TRIVANDRUM

Amount

Fabrication, Supply & Installation of L-Shaped workstations with the following specifications: (Size:- 1500mm + 1200mm (W) x 600mm / 600mm (D) x 1200mm (H)) • Type : Panel Base System • Table Top : Table top is made of 25mm thick pre-laminated particle board in E1 grade finish with 2mm PVC edge banding of REHAU make and 681 Kg/M3 density with 0.68N/mm2 Tensile Strength, 475 rev Abrasion resistance(Min) with 6.25 mg/100g dry board Formaldehyde content. 120Wx120D Anodised finish Flipup is considered for wire manager. • Frames : All frames are made of aluminium sections. • Panel Thickness : Main panel is with 60 -75 mm thickness and return panel with 30mm thick. • Powder Coating of Frames : 60-80 microns thick powder coating after 7 tank process for anti rust and long life. • Fabric : Fabric in 100% Polyester with weight 272 GSM and Anti Flammable for cigarette. 10,000 double rub Abrasion with ISO 105 B02:2014; 24 Hour Light Fastness & with pH Value: 6.7 Origin. • Main Spline : Above table top:- Inside - Hlaf Soft Acoustoic pin up and Half fabric hard bard . 9mm thick PET ( acoustic material which absorbs sound , noise reduction coefficient is .85 at a frequency of 2000) soft pin up considered for all the workstations. . Rest all will be fabric hard board. Below table top:- Both sides E1 grade Pre-Laminated tiles of 9mm thick with two level raceway. • Return Spline : Above table top:- Inside - Each user will have Half Laminate Marker & Half Fabric Hard Board inside & rest all will be fabric hard board. Below table top:- Both sides E1 grade Pre laminated tiles of 9mm thick with two level raceway. • Wire Management: 2 level race ways - one at BTT only at main spine & skirting level race way at main spine & return spine • Support Legs: Powder coated aluminium legs to be considered as support legs. MS powder coated beams needed under the table top.

Fabricaion, Supply & Installation of Mobile Pedestal Units with the following specification: (Size:- 400mm(W) x 450mm(D) x 650mm(H)) with central locking system and aluminium finish C-handles. • Pre laminated mobile pedestal unit with 3 drawers. Upper 2 box drawers + 1 file drawer. • PLPB pedestals with complete pre laminate particle board and with PVC lipping. • All pedestals with heavy duty soft closing telescopic slides. • Each set of slides can bear a load of 35kgs per drawer. • All pedestals supported by 5nos heavy duty castors ,pedestal can with stand load of 80kgs. • Lock keys and body made of antibacterial material. • Master keys are provided in case of loss of keys, available with the facility managers. • PLPB pedestals come with Aluminium/ PVC depressed handles and with side Aluminium groove opening without any handles.

Featherlite Office Systems Pvt Ltd