Extension of existing running room at Satna by 40 beds, new kitchen room, dining room and store room under Assistant Divisional Engineer (North) Satna.

Item Breakup - 1-PART-A

77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 17.71 Providing and fixing PTMT liquid soap Each 25 146.3 3657.5 container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with 102 bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 17.72 Providing and fixing PTMT towel ring Each 20 204.7 4094 trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall 103 face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 104 18.8.2 20 mm nominal dia Pipes Metre 175 513.75 89906.25 105 18.8.3 25 mm nominal dia Pipes Metre 175 626.05 109558.75 106 18.8.4 32 mm nominal dia Pipes Metre 90 712.75 64147.5 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc.-External work 107 18.12.6 50 mm dia nominal bore Metre 140 654.2 91588 108 18.12.8 80 mm dia nominal bore Metre 75 919.1 68932.5 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 109 18.17.4 50 mm nominal bore Each 5 878.25 4391.25 JABALPUR DIVISION-ENGG/WEST CENTRAL RLY Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 110 18.18.3 25 mm nominal bore Each 5 399.15 1995.75 Providing and fixing uplasticised PVC 18.21 connection pipe with brass unions : Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet : 111 18.22.2 150 mm diameter Each 20 190.1 3802 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, 18.47 refilling the earth or cutting of wall and making good the same complete wherever required : 112 18.47.1 15 mm nominal bore Each 10 682.9 6829 113 18.47.2 20 mm nominal bore Each 10 709.7 7097 18.48 Providing and placing on terrace (at all floor Litre 6000 9.7 58200 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking 114 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 115 18.49.1 15 mm nominal bore Each 40 434.2 17368 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 116 18.52.1 15 mm nominal bore Each 60 594.75 35685 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone 19.2 aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 117 19.2.4 250 mm diameter S.W. pipe Metre 110 1476.35 162398.5 Extra for depth beyond 45 cm of brick 19.31 masonry chamber : Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of 19.36 cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 118 19.36.1 450 mm dia RCC pipes. Metre 90 2720 244800 21.0 ALUMINIUM WORK JABALPUR DIVISION-ENGG/WEST CENTRAL RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket 21.1 etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 450 433.95 195277.5 119 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 500 531.8 265900 120 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 30 1019.8 30594 121 (weight not less than 10kg/sqm) 21.18 Providing and fixing 12 mm thick frameless Sqm 27 4540.7 122598.9 toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting 122 hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). STRUCTURAL GLAZING ALUMINIUM 25.0 COMPOSITE PANEL JABALPUR DIVISION-ENGG/WEST CENTRAL RLY 25.8 Design supply & installation of suspended Sqm 45 8230.05 370352.25 Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved 123 drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. Total 28873653.30

Item Breakup - 2-Part-B

Item Breakup - 4-Part-D

Item Breakup - 5-Part-E