Kerala

Active

Works

Civil Works - Buildings

DEPOSIT-Post Metric Hostel Kannur- Providing Sheet Roof-General Civil Work

Public Works Department

Kannur, Kerala

Amount: ₹24.5 LCloses: 1 Oct 20264d left

Timeline

Published23 Sept 2026
Closes1 Oct 2026
Bid Opening3 Oct 2026

Tender Value

₹24.5 L

EMD Value

₹50,000

Closing Date

1 Oct 2026, 3:00 pm4d left

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER

Address

EXECUTIVE ENGINEER PWD BUILDINGS DIVISION, THALASSERY

Work Description

DEPOSIT-Post Metric Hostel Kannur- Providing Sheet Roof-General Civil Work

Tender Information

Tender ID

2026_PWD_872208_1

Reference Number

13/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

Kannur

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical/Finance

RequiredCopy of Bid security remittance ( files size should be less than 1MB ) (.pdf)

RequiredDuly filled and signed copy of Bid submission letter asper item no-1 Part-VI(file size less than1MB) (.pdf)

RequiredDuly filled and signed copy of Integrity pact certificate as per item no-3 (files size less than1MB) (.pdf)

RequiredFilled and signed copy of Preliminary agreement as per item no-2 PartVI(files size less than 1MB) (.pdf)

Requiredfilled and signedcopy of Requisition for e-payment as per itemno-6 PartVI (files size less than 1MB) (.pdf)

RequiredDuly filled and signed copy of Affidavit as per item no-4 Part- VI (files size should be less than 1 (.pdf)

RequiredSelf attested Copy of Bidder valid registration certificate ( files size should be less than 1MB ) (.pdf)

RequiredBid documents with NIT (files size should be less than 3MB and should be uploaded separately) (.pdf)

RequiredCopy of Bid submission fee remittance ( files size should be less than 1MB ) (.pdf)

RequiredGST Document , PAN Card( files size should be less than 1MB) (.pdf)

RequiredBOQ(l files size should be less than 1MB, All files should be uploaded separately) (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,760

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹50,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

23 Sept 2026

Published

23 Sept 2026

Bid Opening

3 Oct 2026

Download Starts

23 Sept 2026

Download Ends

1 Oct 2026

Submission Starts

23 Sept 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (14 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1ROOF(Right side)
1.001	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1.44	cum	-	-
1.002	5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts	14.4	sqm	-	-
1.003	OD93530/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearest size in cement mortar 1:6 for superstructure above floor two level upto floor five level including all cost of materials, labour charges etc.	15.9	cum	-	-
1.004	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	184	sqm	-	-
1.005	13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)	184	sqm	-	-
1.006	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	6,622.88	kg	-	-
1.007	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	1,665.5	kg	-	-
1.008	OD133612/2026-2027:Providing and fixing Aluzink corrugated sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	452.43	sqm	-	-
1.009	50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall	20	metre	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.04 MB

Work Item Documents

SBD.pdf

Tender Documents • 1.63 MB

BOQ_1478959.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1ROOF(Right side)
1.001	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	1.44	cum	-	-
1.002	5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts	14.4	sqm	-	-
1.003	OD93530/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearest size in cement mortar 1:6 for superstructure above floor two level upto floor five level including all cost of materials, labour charges etc.	15.9	cum	-	-
1.004	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	184	sqm	-	-
1.005	13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)	184	sqm	-	-
1.006	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	6,622.88	kg	-	-
1.007	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	1,665.5	kg	-	-
1.008	OD133612/2026-2027:Providing and fixing Aluzink corrugated sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	452.43	sqm	-	-
1.009	50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall	20	metre	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1ROOF(Right side)

1.001

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

1.44

cum

1.002

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

14.4

sqm

1.003

OD93530/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearest size in cement mortar 1:6 for superstructure above floor two level upto floor five level including all cost of materials, labour charges etc.

15.9

cum

1.004

13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

184

sqm

1.005

13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

184

sqm

1.006

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

6,622.88

1.007

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

1,665.5

1.008

OD133612/2026-2027:Providing and fixing Aluzink corrugated sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

452.43

sqm

1.009

50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

metre