Strengthening Of Road (P/L Bitumen Mastic on Cuts and T-Point on Internal Roads in Sector 132) Noida

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rates of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS 702 prepared by using mastic cooker and laid to required level and slope induding providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximates spacing of 10cm centre to centre in both directions, pressed into surface protruding 1mm to 4mm over mastic surface, induding cleaning the surface, removal of debris etc. all complete. (Considering bitumen using 10.2% as per MORTH specification.)40 mm thick

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site , laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled , vibratory and tandem rollers to achieve the dsired compaction as per MORTH specification clause No. 505 complete in all respects.