Cost of supply, installation, testing and commissioning (SITC) of 10 nos of air-conditioning units at different office rooms at Directorate of Commercial Taxes, Beharampur charge, Murshidabad through PWD---Airconditioning Work

Amount

Supply and Installation of 1.5 Tr(Inverter) SPLIT type room air conditioner machine having the following specification:- (a) Cooling capacity nominal (BTU/Hr):18000(Minimum) (b) Star rating- 3 to 5 star. (c) Rated voltage—230v +/-5%, Frequency-50Hz. (d) Compressor type-Rotary, Condenser and evaporator- Copper Coil (e) Refrigerant : R32/R410A (f) Mini. Room Discharge air flow rate 350CFM.(Min) (g) Cordless Remote arrangement with all modernize provision of temperature setting, Fan speed option (low/medium/high), Auto swing, Air direction setting, Timer facility, Turbo operation setting, Air ventilation arrangement and others.Incl. delivery charges, the Compressor of the AC machines should be warranted for 5 years.(MAKE-GENERAL/ Daikin/Mitsubishi Electric /Carrier) and the Split AC machine should be warranted for 3 years(Overall)

Supply and Installation of 2 Tr (Inverter) SPLIT type room air conditioner machine having the following specification:- (a) Cooling capacity nominal (BTU/Hr):24000(Minimum) (b) Star rating- 3 to 5 star. (c) Rated voltage—230v +/-5%, Frequency-50Hz. (d) Compressor type-Rotary, Condenser and evaporator- Copper Coil (e) Refrigerant : R32/R410A (f) Mini. Room Discharge air flow rate 350CFM.(Min) (g) Cordless Remote arrangement with all modernize provision of temperature setting, Fan speed option (low/medium/high), Auto swing, Air direction setting, Timer facility, Turbo operation setting, Air ventilation arrangement and others.Incl. delivery charges, the Compressor of the AC machines should be warranted for 5 years.(MAKE-GENERAL/ Daikin/Mitsubishi Electric /Carrier) and the Split AC machine should be warranted for 3 years(Overall)

Supply and fixing the followings, i) 3-Core, 2.5 Sq.mm. PVC insulated copper power wire for inter - connecting indoor and outdoor unit. (Finolex/EIC approve make) as per direction by EIC. ii) copper refrigerant pipe line for inter connection of indoor & outdoor unit as following size. (a) 5/8" copper pipe including 13mm thick nitrile rubber thermal insulation of suitable thickness as per direction of E.I.C. (b) 1/4" copper pipe including 13mm thick nitrile rubber thermal insulation of suitable thickness as per direction of E.I.C.

Supplying , fabrication , & fixing 3 Nos. M.S L- channel of 6 mm thick of size ( 50 mm x 50 mm) of 1 m length for making with supporting angle Base Frame for installation of outdoor unit of 1.5 /2 ton split AC machine incl. Drilling 2 nos. Holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1: 1 1/2 : 3) etc. fabricated with 3 nos. horizontal 25 mm X 5 mm flat patti for maintenance of basement. ( Drawing should be approved prior work by EIC).

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run for split AC (three stroried building for 8 nos of AC)

Supply & laying Drain Water piping work out of PVC / HDPE hard pipes of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors - 40 mm dia ( For Split AC machine)

JASODA REFRIGERATOR SERVICING CENTRE

SRIDAM MONDAL