Ineterlinking Kuttippuram Feeder to Mallurkadavu Feeder Through Kuttipurm old Bharathapuzha Bridge

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Providing additional HT stay insulator in existing stay.

Drilling hole of various sizes on existing Channel/Cross Arm.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting and providing one HT Fly stay for 11kV pole using A type pole incl. digging & back filling pits.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Fitting one set AB switch and giving connection

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling

Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling one LT 4 line cross arm from existing pole.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls

Dismantling (without damage) one ordinary street light/CFL/LED fitting from the pole and stacking.

Stringing one km LT 3ph 4 wire line (Rabbit for Ph, Weasel for N) incl. fitting cross arm etc. removing touchings and conveyance of materials.

Dismantling one damaged HT PSC/RCC Strut pole incl. removal of clamps and stacking.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Additional rate for excavation of one Pit for Coil Earthing in Laterite

Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary.

Additional rate for excavation of Pit for A type pole in Laterite.

10.2 Structural steel work

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Supplying, laying and fixing 150 mm dia G.I. pipe (medium class) including fixing the pipe with clamps etc complete with G.I. fittings (supporting clamp excluded), excluding the trenching and re-filling.

Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling.

Laying HT XLPE UG cable (of sizes upto and incl. 3x185 sqmm) as per specification excl. excavation and backfilling.

Doing HDD along/across roads,supplying & pulling 125mm HDPE pipe and drawing 11kV 3x300Sqmm XLPE UG cable through the pipe,surveying the site for information about UG utilities,restoring the damages if any,closing of pits with normal soil/crusher sand,mounting the cable after providing loop at 1.2m depth, putting HDPE (PN-6,Kg/sq mm) at rising point,making RCC jointing chambers for straight joints,placing route markers at 100m interval, test ing&commissioning(includes cost of transportation of all materials)

Doing one cable end termination on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally.

Doing straight joint on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally as per specification.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting and providing one Strut using A type pole incl. digging & back filling pit.

Mounting the cable ends of all sizes upto and incl. 3x300 sq mm with special type cable clamps incl. cost of extra materials if needed and giving necessary connections.

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

CONSOLIDATED BOQ (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Quoted Amount of BOQ1 in figures

GST Rate in percentage