Providing LWSS to PC_FC habitation from Dwaru Kahd to Bindla in Tehsil Karsog Distt Mandi HP SH_Barbed wier fencing around pump house C_o Headweir at Dwaru Kahd C_o RCC intake chamber C_o RCC sedmentation tank 10000 Ltr cap C_o RCC Filter bed of 17_1

Amount

Excavation in foundations trenches etc. in all kind of soil in all leads and lifts such as pick work, jumper work in saturated /un saturated soil blasting work and chiseling /wedging out of rocks where blasting work is prohibited up all depth and lifts including pumping and baling out water where ever requared stacking the excavated earth not more than 3mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and disposing of all surplus excavated material within all leads and lifts, useful materials available from excavation to be properly stacked and handed over free of cost to the department as per direction of the Engineer-in-Charge

Providing and laying cement concrete 1:4:8(1cement:4sand:8graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts:

Providing and Fixing 1.80 meter long RCC fencing post with 6 mm bar nibs as per approved design (Earth work to be paid seperately).

1.20 meter heigh fencing (as per approved design) 1.80 meter RCC posts 3 meter center to centre and RCC struts with 7 horizontal lines and two diagonal of galvanised steel bar wire (IS 278-1982 type I) weighing 9.38 kg/100 meters (min) strained and fixed to posts by typing to 6 mm galvanised steel bar nails/clips with GI binding wire i/c cost of Excavation RCC posts struts and straining complette in all respect and to the entire satifaction of the Engineer in charge.

Steel work welded in built up sections,trusses & framed work including cutting,hoisting & fixing in position & applying a priming coat of red paint :-In grating, framed ,guards,bars,ladders, railing,brackets & similar works with in all leads and lifts as per the entire satisfaction & direction of the Engineer Incharge

Providing and laying cement concrete 1:3:6(1cement:3sand:6graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts:

i) Foundation and Plinth.

Providing plinth protection 50 mm thick in cement concrete 1:3:6(1cement:3sand:6graded stone aggregate of 20mm nominal size) including finishing the top surface of concrete smooth. iith in all all leads and lifts:

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in situ reinforced concrete and plain concrete work including all leads and lifts:

i) Flat surface such as soffits and suspended floors, roofs, landings and the like : Floors etc up to 200 mm in thickness within all leads and lifts

ii) Vertical surfaces such as walls (any thickness) portion and like i/c attached pilaster buttressess plinth and string course and like.

iii) Foundations, footings, bases of columns & the like and mass concrete within all leads and lifts.

Providing and laying cement concrete 1:2:4(1cement:2sand: 4graded stone agg.20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work.

i) Suspended floors, roofs, landings, shelves and their supports balconies, beams girders bressumers and cantilevers up to floor level etc in all leads and lifts of any shape.

Placing & Laying mild /tor steel reinforcement for RCC. work including bending, binding and placing in position complete up to floor two level including all leads and lifts.:

Providing and laying cement concrete1:5:10 (1Cement :5sand :10 graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in retaining wall/ breast wall, as per HPPWD specification complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge upto all lead & lifts.

Laying and jointing in trenches GSM tubes (light grade) Tube fitting Earth work in trenches to be measured and paid separately). as per direction and to the entire satisfaction of Engineer iin charge

65 mm diameter

50 mm diameter

Providing and laying cement concrete 1:1 ½ :3(1cement:1 ½ sand:3graded stone aggregate of 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work including all leads and lifts:

i) Foundation and Plinth.

ii) Wall (any thickness but not less than 0.1 m thickness) attached pillasters,plinth and string courses etc. from top o foundation level upto floor two level.

iii) Suspended floors, roofs, landings, shelves and their supports balconies, beams girders bressumers and cantilevers up to floor level etc in all leads and lifts of any shape.

Providing and fixing Gun Metal wheel valve with wheel complete in all respect and to the entire satisfaction of Engineer in charge.

i) 50 mm nominal bore

ii) 65 mm nominal bore

Providing and fixing Gun Metal wheel valve (with hand wheel) as per IS 780 Cl-I upto 300 mm dia (including brass spindleand as per IS 2906 cl-II sor diameters more than 300 mm complete with bolts, nuts, rubber insertion etc, (the tail pieces if required shall be measured and paid for separately). complete in all respect and to the entire satisfaction of Engineer in charge.

In let valve 65 mm

Supply valve 80 mm

Scour valve 100 mm

Providing and fixing precast concrete manhole cover & frame conforming to IS 12593-1998 part -I and IS 12592-1991 part -II 560 mm dia medium duty

Providing and fixing sand cast iron/ cast iron spun spigot and socket soil waste and ventilating pipe (lead choked joints to be measured and paid for separately 100 mm nominal size.

Providing and fixing sand cast iron/ cast iron spun fittings cast iron cowl 100 mm dia.

Providing smooth finishing in cement mortar 1:3 (1 cement 3 sand)

Providing and placing in horizontal layers filtering media duly graded, screened cleaned and washed as per specified in all respectas per direction & to the entire satisfaction of Engineer-in- Charge upto all lead & lifts.

a) Top layer : Fine sand ( Eff.size 0.20mm to 0.40 mm & uniformity coefficient 2.00 to 3.00)

b) 2nd layer :Coarse sand 3mm to 6 mm

c) Third layer : Bazri 6 mm to 20 mm

d) Fourth layer : Bazri 20 mm to 25 mm

e) Bottom layer:Broken stone 50 mm to 75mm.

Providing and placing 1st class standard brocks in filter bed in two layers so as to make cross dreains as per the direction and entire satisfaction of Engineer in charge upto all lead & lifts

Providing laying in trenches galvanised mild stell tube, tube medium grade tube fitting . (earth work in trenches to be measured and paid separately) as per direction and to the entire satisfaction of Engineer iin charge

(a) Inlet pipe 65 mm

(b) Outlet pipe 80 mm

(c) Scour pipe 100 mm

Manufacturing, Supplying, Fabrication and Fixing of MS Fabricated Protection Panel 750 mm x750mm made with MS Angle 40 x40x4mm for frame, MS flat 30x30x3mm for cover MS flat 25 x 5mm for fixing of sliding door bolt and MS sheet 4 mm thiuck for protection of manhole covers of storage tanks includin the cost of cutting and welding o MA angle, MS flat & MS sheet, embedding in RCC slab by drilling holes in MS angle & in RCC slab, provision for providing and fixing sliding door bolt 300 mm x 16 mm, MS Handle 100 mm, lock and applying a coat of red lead paint and painting two coat with steel paint (Firoza Blue) complete job in all respec in all leads and lifts and to the entire satisfaction of the Engineer in charge.

Providing and Laying cement concret 1:6:12(1cement: 6sand: 12graded stone agg.40mm nominal size) curing complete complete excluding cost of centering & shuttering in foundation and plinth. In all leads and lifts.

Random Rubble masonry /polygonal rubble masonary (coursed /brought to courses ) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12(1cement: 6sand: 12graded stone agg.20mm nominal size) in plinth level in cement mortor 1:6 (1 cement : 6 sand).

Bricks work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (1 cement : 4 Sand). First class bricks.

Half bricks masonry in common burnt clay building bricks in cement mortar 1:4 (1 cement : 4 Sand). First class bricks super structure

Providing wood work in frame of doors, windows, clearstory windows and other frames wrought, framed and fixed in position : 2nd class deodar wood.

Providing and fixing panelled glazed of panelled and glazed shutters for doors, windows & clearstory windows i/c black enamelled iron butt hings with necessary screw 40 mm thick 2nd class deodar wood.

Providing and fixing wire gauge shutters using galvanised MS wire guage of IS guage designation 85 G with wire of dia 0.56 mm for door windows and clearstory window i/c black enemelled iron butt hinges with necessary screw 40 mm thick 2nd class deodar wood.

P/F MS Grills of required pattern in wooden frames of windows etc with MS flats, square or round bars with round headed bolts and nuts or by the screws (Plain).

Pointing on brick work with cement mortor 1:3 (1 Cement:3 sand) raised and cut.

6 mm cement plaster to ceilling in cement mortar 1:3 (1 cemet : 3 sand) with in all lead and lift.

20 mm cement plaster in single caot on rough side stone masonary for interior plastering upto floor two level i/c arrises internal rounded angles, chamfers and or rounded angles not exceding 80 mm in grith and finish even and smooth in cement mortor 1:6 (1 cement : 6 sand).

15mm cement plaster in single coat on rough side of brick /concrete stone walls for interior plaster up to floor two elvel including arrises, internal rounded angles, chamfers ad/or rounded angles not exceediong 80mm in girth and finished even and smooth in C.M 1:6 (1Cement :6 Sand)

White washing with lime on undecorated wall surfae two coat to give even shade i/c throughly brooming the surfae to remove all dust motor and other foreign matter with in all lead and lift.

White washing with lime on ceiling or slopping roof. with in all lead and lift.

Providing 40X3 Flat iron hold fast 40cm long i/c fixing to frame with 10m.m dia bolts nut and wooden pugs and embedded in cement conc. Block 30x10x15 (1 cement: 3 sand:6 graded stone aggregate 20mm nominal size).

Providing and fixing M.S sliding door bolts with bolts and nuts screws etc. complete.

P/F anodized aluminium handles anodized transparent or dyed to required shade and colour with screws ec. complete.

P/F anodized aluminium handles anodized transparent or dyed to required shade and colour with screws ec. complete.

P/F Oxidized MS hook and eyes

Boulder filling dry hand packed tightly under floors with in all leads and lifts complete in all respect.

40 mm thick Cement concrete flooring 1:2:4(1cement:2sand:4graded stone agg.20mm nominal size) laid in one layer finished with a floating coat of neat cement including all leads and lifts

Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink.

Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaning the surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white.

KAMAL KUMAR

JITENDER KUMAR