SPL REPAIR TO DRAIN, CULVERT, FENCING, PATHWAY AND EXTERNAL LIGHTS OF MES INSTLN AT NAA UNDER GE (N) TEZPUR

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete in all respect as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete in all respect as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

Dismantling of posts or struts (Wood, Steel or RCC) of any section and size including taking out embeded portion and making good disturbed ground posts embeded in cement concrete, brick work, masonary complete in all respect as specified and directed.

Dismantling of fencing wire mesh including tie rods, flat iron etc any type, complete in all respect as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 300mm internal dia complete in all respect as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete in all respect as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.5 Cum getting out ,returning, filling and ramming earth in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc. 50 mtr in soft/loose soil complete in all respect as specified and directed.

Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil complete in all respect as specified and directed.

Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete in all respect as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in all respect as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc. complete in all respect as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm nominal size crushed and graded stone aggregate) as in surface channels & drains complete in all respect as specified and directed.

M & L for extra forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc for 300mm girth .complete in all respect as specified and directed.

M & L for brick work sub class B, class designation 75 old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete in all respect as specified and directed.

M&L for 15mm thick rendering on brick work or concrete wall surfaces in cement mortar 1:6, finished even & smooth with using extra cement complete in all respect as specified and directed.

M&L for cement concrete Type E-2, 1:4:8 (using 40mm nominal size crushed and graded stone aggregate) in foundations filling and mass concrete as in surroundings of fencing post etc. complete in all respect as specified and directed.

S&F mild steel deformed TMT bar 10mm dia and over cut to length, bend to shape required, including cranking , bending spirally for hooping for columns, hooking and binding with and including mild steel wire (ammealed) not less than 0.9 mm dia complete in all respect as specified and directed.

All as per Ser item No 18 here in before but 5mm dia and over upto and including 10mm dia bars as in stirrups, spacers and binders, quality conforming to Fe-410 complete in all respect as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using Fe-410W (Grade E-250 quality "A") including necessary welding and including dismantaling of existing angle complete complete all as specified and directed.

S&F mild steel round bar 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia(Fe-410-W or (Gde E-250) quality A or Fe 290 (Gde E-165) complete in all respect as specified and directed.

S&F in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type if standard rail s straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staple or steel pins etc. complete in all respect as specified and directed.

Supply Chain link MS galvanisd fencing, any size or type mesh fixed to RCC post/MS Post including securing or tying with GI MS wire staples, ms section, bars etc. . complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire.

S&F mild steel screw bolts 11 to 15mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and haxagonal or square exe 5 cm and n exc 10 cm long complete in all respect as specified and directed.

S&F mild steel works in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing (Fe 290 (Gde E-165) ) complete in all respect as specified and directed.

S & F 55-60mm thick factory made coloured, glazed pre coated interlocking or without interlocking paver block of any shape and size confirming to IS 15658/1237 with upto date amendments, M-35 Grade with grey cement with pigment laid over and incl 20-25 mm thick fine river bed sand complete in all respect as specified and directed. Sample as approved by GE.

M&L for Plain Cement Concrete Type B-2 1:2:4 (using 40 mm graded stone aggregate) 100mm thick making finish even and fair without using extra cement.complete in all respect as specified and directed.

M & L for PCC (1:2:4) type B-1 using 20 mm nominal size crushed and graded stone aggregate in coping, hold fasts or of similar items including necessary cutting, form work etc. complete in all respect as specified and directed.

M&L for Providing and laying plinth protection of 75mm thick cement concrete, using type C-1, (1:3:6) (using 20mm nominal size crushed and graded stone aggregate), laid in alternate penals/bays and finished the surafce even and smooth without using extra cement complete in all respect as specifified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laying in trenches 110mm bore complete in all respect as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laying in trenches 75mm bore complete in all respect as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including necessary MS pipe clamp complete in all respect as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including necessary MS pipe clamp complete in all respect as specified and directed.

S & F PVC (SWR) bends any radius 110mm bore complete in all respect as specified and directed.

S & F PVC (SWR) single (single tee) equal or unequal 110mm bore pipe with access door complete in all respect specified and directed..

S & F PVC (SWR)110mm bore vent cowl complete in all respect as specifified and directed.

M&L for half brick work with subclass ‘B’ old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:4) including dismantalling of brick work built in cement mortar in any position, complete in all respect as specified and directed.

M&L for preparation of steel surfaces of any width or girth and applying one coat of synthetic enamel paints complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B1 (using 20mm crushed and graded stone aggregate) as in flooring finished even and smooth using extra cment complete in all respect as specified and directed.

Roughening of surfaces of old concrete floor by picking, sweeping clean, and washing down with water to remove dust, etc. complete all as specified & directed.

M&L for Brushing neat cement slurry with 3.00 Kg of cement per sqm complete all as specified & directed.

S & F Plastic dividing strips, 1.5mm thick of size 38mm complete in all respect as specified and directed.

M&L for Providing precast man hole cover, coping etc. in cement concrete 1:2:4 type B1 using 20mm nominal size crushed and graded stone aggregate or similar type of itmes complete in all respect as specified and directed.

M &L for mild steel plate as in wall clading steel gates and similar work 1.6mm thick complete all as specified and directed.

S&F 70mm Dia cast Iron Ball grade F.G. 150 machined in pulleyes and similar articals as specified and directed article Not exc. 5Kg each complete all as specified and directed.

M & L for 450mm internal dia of Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches complete in all respect as specified and directed.

M & L for Running welding in repairs exc. 2.5cm but n. exc 5cm in length and exc. 9mm but not exc 20mm complete in all respect as specified and directed. (Note: Welding machine and rod is included in this item, the site is spread in wide spread area, Contractor must quote the rates accordingly)

M&L for Reinforced cement concrete type B1 1:2:4 (20 mm graded stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Preparaing old decorated plastered or unplastered surface of wall and apply two coats of white wash including scrapping down of old white wash completely complete in all respect as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls, by smole soot, moulds, moss and efflorescence salts and trading oil and greasy spots by scraping , washing with water all as specified, filling cracks/ hole by applying wall care putty (multipurpose mixer shall be used for uniform & proper mixing of putty) and applying one coat of cement base paint white or coloured by auto roller complete in all respect as specified and directed as per manufactures instruction.

M&L for preparation of plastered or unplastered old decorated surfaces of walls, by smole soot, moulds, moss and efflorescence salts and trading oil and greasy spots , washing with water all as specified, filling cracks/ hole by applying wall care putty and applying one coat of weather coat white or coloured complete in all respect as specified and directed.

M&L for Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in beams, lintels, etc.; complete in all respect as specifified and directed.

M&L for formwork to sides of pillars, posts, columns, and similar works of rough finished surfaces complete all as specified and directed

M&L for Providing and laying for reinforced cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) in columns, posts, struts etc. complete in all respect as specifified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in fair finish of flat surface complete in all respect as specified and directed.

M&L for preparation of old decorated plastered surface of wall after complete removal of existing treatment and applying two coats of weather coat over 2 mm thick wall care putty (in two layers) over a coat of primer including preparation of surface, complete in all respect as specified and directed.

S & F factory made coloured rubber moulded, glazed pre coated chequered cement concrete tiles of any shape and size 20-25mm thick with grey cement with pigment,; set jointed and pointed in neat cement slurry with pigment in floors including over 15mm thick screed bed in CM 1:4 complete in all respect as specified and directed. Sample as approved by GE.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete in all respect as specified and directed

M&L for Providing & laying vitrified coloured digital printed parking floor tiles of size 400mmX400mm ,9 to 12mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tiles laid over and including 15mm thick screed bedding in cm 1:6 and dismentling of existing tiles/blocks of any discription complete in all respect as specified and directed.

M&L for Providing & laying heavy duty non skid coloured digital printed floor tiles of size 300mmX300mm ,8 to 10mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tiles laid over and including 15mm thick screed bedding in cm 1:6 and dismentling of existing tiles/blocks of any discription complete in all respect as specified and directed. make-somany(heavy duty),johnson (Endura), Orient Bell(Pavers)

M & L for Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed

M&L for 20mm thick Granite(of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M & L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter in fair finish of flat surface complete in all respect as specified and directed.

Dismantaling & taking down unserviceable street light LED Fittings, Garden lights, gate lights Pin /Holder type from pole and refixing with the new fitting as specified under with copper conductor from junction boxes to light fitting complete all as specified and as directed. Note : Spares items such as LED fitting and cable etc, will be measured and paid separately under respective items.

Supply & Fixing in replacement PVC insulated weather proof sheated alluminium cable 2.5 Sqmm 3 core as 2.5 Sqmm single core for earthing complete all as specified and directed.

Supply and Fixing in replacement New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source with secondary optics & exclusively designed polycarbonate cover alongwith electronic driver suitable for 32/40 mm dia bracket size of rating 60 W LED complete all as specified and directed.

Supply and Fixing in replacement new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 flood luminaire with high power LEDs as light source with secondary optics & exclusively designed polycarbonate cover along with electronic driver of rating 70W LED Flood light complete all as specified and directed.

Supply and Fixing in replacement new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 flood luminaire with high power LEDs as light source with secondary optics & exclusively designed polycarbonate cover along with electronic driver of rating 200W LED Flood light complete all as specified and directed.

Supply and fixing in replacement of LED Post Top Lantern of New generation, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source of 15 Watt LED including fixing on 40mm dia grouted in post complete with and including angle iron cage as per existing shape and size of piller to protect the any damage by monkeys all as specified and directed .

M&L in replacement street light bracket made out of 32 mm dia GI pipe medium grade 120 cm long cut to size and bend to shape , fixing for LT steel poles with flat iron clamps 40mm x 6 mm – 02 sets including nuts, bolts and washers including one coat of aluminium pait over acoat of red oxide primer including taking down of old unserviceable complete all as specified.

Material and labour for replacement of junction boxes with new Thermoplastic Cable Junction Boxes IP66/67 "weather proof" , for outdoor installation with knockouts for cable entry with terminals suitable for 10-16sqmm cable off Size 155 X 210 X 92 mm incl busbar fixed in repairs and including Necessary civil works and connecting all incoming and outgoing wires with AL lugs of appropiate sizes and complete all as specified and directed by Engr-in-Charge.

Supply & fixing in replacemet Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 mtrs long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous paint from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Paint over a coat of Primer (Externally from Top of Coping), including necessary earth work, excavation, PCC 1:3:6 using 40mm gAssesdded sone aggregate for foundation and coping with PCC 1:2:4 using 20mm stone aggregate and smooth finish complete all as specified and as directed.

M&L for earthing complete with galvanised perforated steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge of the pipe not less than 1.25 metres below ground level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 2 of SSR Part I connected to earth test point all as specified or indicated and connected earth work, in soft/loose soil, removing soil upto 50m, refilling agricultural soil if sandy soil, PCC 1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm bore GI light grade earth lead protection pipe, 50mm thick RCC 1:2:4 type B1 cover slab of earth pit reinforced with 8 mm dia TMT Bars @ 10cm C/C both ways and with handle made out of 20mm dia bars, funnel, strainer, alternate layer of charcoal dust and common salt at 2.5Mtr depth and testing on completion , complete all as specified and directed.

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated , galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade multi stranded aluminium conductor of size 10 sq mm, 2 core.

Supply & fixing in replacement of PVC conduite medium grade not less than 19/20mm dia fixed with RCC/steel tubular pole clamp or by any other means all as specified and directed.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed.

Material and labour for sand cushioning for cable protection using clean dry sand complete all as specified and directed.

Supply and laying in trenches brick common burnt clay building brick, sub class 'B' designated- 75 with width equal to length of brick for cable protection complete.

M&L for Boring/Drilling (Horizontally) manually/mechanically under existing road (Maximum 10 M in width) suitable for passing GI tubing of 40 mm bore complete all as specified and directed.

NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.

Shiva Builders (BID ID -3484304)

M/S Bharat Construction Co. (BID ID -3483974)

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3483843)