GENERAL-Health Department - Annual Plan 2023-24 - Implementation of Plan scheme Women and Children Hospitals - Works at Women Children Hospitals Thrissur Balance Electrical work -Additional fire fighting work-SITC of Electrical Fire Fighting Work

Amount

Fire fighting

OD224587/2024-2025:DIESEL ENGINE DRIVEN PUMP:-Supplying, Installation, Testing and Commissioning of Diesel Engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required.(a)Horizontal type, end suction pump of cast iron body & bronze impeller with stainless steelshaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm.at highest and farthest outlet at specified flow of 2280 lpm at 50 m. head coupled to 60 HP, 1800 RPM water cooled with radiator, Diesel engine Complete with auto starting mechanism, 12 Volts/ electric starting equipment , Diesel tank, exhaust pipe extended up to 1.0 m.out side pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post officered colour etc. as required.(c)M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Providing and fixing 15 mm dia GI pipe C class for fuel line as required. (e)Suitable cement concrete foundation duly plastered with antivibration pads.

OD224588/2024-2025:Supply, installation, testing and commissioning of Main Min fire fighting pump of horizontal centrifugal end suction type rated for 2280 LPM 50m head high efficiency volute type with cast iron casing impeller, pump rated for automatic operation coupled to squirrel cage induction motor screen protected drip proof rated at 415V 50 Hz foot mounted type 50 HP, 2900 RPM inclduing supply and installation of all accessories like base frame foundation bolts etc complete.

OD224589/2024-2025:Supply, installation, testing and commissioning of Horizontal mounted end suction type electric motor driven two stage Jockey pump 180 LPM at 55 MWC h with cast iron casing bronze impeller, including all accessories operating on Three phase 50Hz,415V AC supply including foundation, bolts etc. complete. The pump set shall be of 3.73KW / 5 HP

90.17.14.7:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150mm dia

90.17.20:Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

90.17.6.2:Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.150 mm. Dia

90.17.7.7:Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia

90.17.11.5:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia

90.17.11.6:Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required150 mm dia

90.17.22:Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.17.14.5:Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia

OD224712/2024-2025:Supply,installation,testing and commissioning of 25mm gun metal air release valve as per IS 14845 ISI marked

OD224715/2024-2025:PRESSURE GAUGE:-Supplying, fixing, testing and commissioning of 0-15 Kg/sq cm100mm dia Dial type pressure gauge with isolation cock and pipe at hydrant station as per specification.

90.17.25.2:Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, centre bracket, stock bar of following sizes complete as required.1000mm

OD228385/2024-2025:Copying charges of Electrical/fire Drawing per A3 sheet additional copies

OD228386/2024-2025:Charges for preparation of Electrical/fire Drawing per A3 sheet first copy

Aag India Private Limited (BID ID -2086535)

Bidder Name

Allies Fire Systems Pvt Ltd

Aag India Private Limited