ADDN/ ALTN TO MI ROOM AT RAJPURA UNDER GE (AF) AMBALA

Amount

Surface excavation not exceeding 30cm deep & averaging 15cm deep in soft/losse soil including removal of vegetation, bushes, shrubs & trees(not exceeding 30cm in girth) complete all as specified & directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in Soft /loose any type of soil complete all as specified & directed by engr -in -Charge.

M&L for plain cement concrete 1:4:8 type D2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr -in -Charge.

M&L for reinforced cement concrete (RCC)Type B1 1:2:4 using 20mm graded mechanically crushed stone aggregate as in foundations, includingrafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr -in -Charge.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed by Engr -in -Charge.

M&L for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for fair finished surfaces of concrete complete all as specified and directed by Engr -in -Charge.

M&L for RCC 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr -in -Charge

M&L for RCC type B 1, 1:2:4 using 20mm graded mechanically crushed stone aggregate as in columns, pillars, piers,posts and struts complete all as specified and directed by Engr -in -Charge

M&L for RCC type B 1, 1:2:4using 20mm graded mechanically crushed stone aggregate as in beams, chajja cantilevers,bressummers, lintels over 1.5mtr span complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases ofcolumns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, Fe 500/Fe 500D grade confirming to IS-1786, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia, , Fe500/Fe500D grade confirming to IS-1786, cut to length cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacer & binders complete all as specified and directed by Engr -in -Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed by Engr -in -Charge

Removal of soil to a distance not exceeding 50m and depositing where directed complete all as specified and directed by Engr -in -Charge

M & L for laying broken stone or boulders hardcore of guage exceeding 63 mm but not exceeding 100 mm deposited spread and levelled in layers not exceeding 15 cm thick watered rolled/rammed to a true surface complete all as specified and directed

M&L for, 75 mm thick Plain Cement Concrete, (1:4:8), type D2, using 40 mm graded mechanically crushed stone aggregates, as in sub base complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 (40mm thick) using 20mm graded mechanically crushed stone aggregate as in leveling course/sub base complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finish and. Complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick Suare/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match, complete all as specified & directed.

M&L for coloured glazed ceramic tiles 300 x450x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed .

M&L for Chequered cement concrete commercial Tiles 25cm x 25cm x 20 to 22mm /30cmx30cmx20 to 25mm thick of with grey cement and pigment set jointed and pointed in neat cement slurry in floors and cut and polished laid ande over and including 15mm Screed in CM 1:6 including complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in paving/plinth protection/ laid in panels and joints filled with mix of bitumen and sand (1:3) by weight, finished the surface even and fair without using extra cement complete all as specified and directed

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded mechanically crushed stone aggregates) as in coping/ bed plate/ bed block including necessary forms and moulds, complete all as specified & directed by Engr -in-Charge

M&L for brick work with fly ash bricks brick straight or curved on plan exceeding 6m mean radius built in cement mortor 1:6.all as specified and directed by the Engr-in-Charge

M&L for brick work with fly ash bricks straight or curved on plan to any radius built in half brick thick walls built in cement mortor 1:4.all as specified and directed by the Engr-in-Charge

M & L for brick work with sub class `B' bricks old size in CM 1:4 straight or curved on plan exceeding 6m mean redius in damaged man holes septic tank/soak well etc including demolition down if required, complete all as specified and directed.

M&L for 15mm thick rendering on brick or concrete surface wall on fair face/other than fair face in cement mortar 1:4 and finishing the surface with even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid seperately

Supply only water proofing compound complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces /other than fair face of brick work or concrete surfaces in CM 1:4 as backing coat to receive wall tiles etc complete all as specified and directed.

M&L for 5mm thick rendering on ceilings in cement mortar 1:3 and finishing the surface with even and smooth without using extra cement all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces and applying three coats of white wash on wall surface complete all as specified and as directed.

M&L for preparation of newly plastered surface applying three coat of white wash on ceiling surface complete all as specified and as directed.

M&L for Applying two coats of cement base paint over a coat of primer on new wall surface including preparation of surface complete all as specified and as directed.

S&F Pillar tap 15mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe and fixed and complete all as specified and as directed.

S& F Stop valves 15mm dia cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F 15 mm CP cast copper alloy bib taps fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 25/32mm bore High density polyethylene pipes (HDPE) of pressure rating 6kgf/sqcm laid in trenches complete all as specified and as directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.

S&F, UPVC (SWR) pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls/treanch fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

M&L Precast RCC 1:2:4 type B1 (using 20mm graded mechanically crushed stone aggregate) as in cover slab of drain, culvert, manhole and the like set in CM 1:4 complete all as specified and as directed.

S&F PVC (SWR) bends any radius, 110mm bore with / without access door, complete all as specified and directed.

S&F new 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors or trench , complete all as specified and as directed

S&F new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.

M&L for cast iron floor trap 75mm dia, with grating including jointing to wate pipe fixed in cement concrete type B1 (1:2:4), complete all as specified and as directed.

S&F PVC connection 15 mm dia, 450 mm long including check nut complete, all as specified and directed.

M&L for pre- polished granite slab machine cut of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones complete all as 'specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platforms, and other similar situations complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including sheet cover and complete all as specified and directed.

S&F Vitreous china White Squatting Orissa Pattern pan of size 580x440mm, including UPVC ‘P’ or ‘S’ trap, front or back inlet and integral foot rests and making connection to trap and to flushing pipe, anti syphonic pipe, fixed including, complete all as specified and directed.

S&F Viterous china wash basin, white, flat back, size 630x450mm counter sunk oval type fixed in granite excluding taps, waste,chain and plug and porcelain stopper complete all as specified and directed

S&F Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe, complete all as specified and as directed.

S&F vitreous china urinal partition ,white of size 310 x 700mm etc complete all as specified and directed.

S & F waste coupling CP brass (half or full threaded) 32 mm dia complete all as specified and directed.

Supply only PVC valve less syphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve float and handle including bracket and fixing of PVC flush pipe 32 mm dia and PVC connection pipes complete all as specified and directed.

Supply only flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F chromium plated square shape towel ring fixed with chromium plated brass screws in approved pattern complete all as specified and directed.

S & F stainless steel chromium plated toilet paper holder in approved pattern, shape and size complete all as specified & directed.

S & F fancy type chromium plated brass soap dish suitable for double soap fixed of approved pattern, shape and size complete all as specified & directed.

S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30 mm thick (Stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per drawing shown on SSR complete all as specified and directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed.

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 75 mm long complete all as specified and directed

S&F 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

S & F 150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S & F 100 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S & F 3 mm thick sheet glass figured glass not exceeding 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F 500 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S&F Gun metal Gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed including cutting / threading old pipes and provision of new fittings such as Tee, socket, elbow, union etc as required, complete all as specified and directed

S & F of 20 mm bore ball valves, high pressure, PTMT, with polyethylene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

M & L for concrete bed to drain pipes including packing under , haunching against RM the sides of pipes after they are laid and tested in cement concrete 1:3:6 for 150 mm dia pipe complete all as specified and directed.

M & L for 200 mm dia Reinforced concrete pipes, class NP2, drain pipes laid in trenches and jointed complete with collars, all as specified and directed.

S&F factory made BOX type steel windows double shutter (glazed and wire gauzed) with side hunges shutters, includingbox type hinges ,steel handle fabricated type for each leaf duly welded , mild steel barrel tower bolts 150mm size(02 or more nos for each leaf) duly welded,complete with glazing bars , dovetailed or welded,including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window frame & guard bars complete all as spd and directed . NOTE :-(I) Glazing & wire gauze shall be measured and paid separately as supply and fixing and guard bars shall be measured and paid saparately (ii)The term double shutter stated is meant for providing glaze shutter as well as wire gauze shutter on outside and inside of the frame respectively.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire stapels complete all as specifed and directed.

S&F in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanesed wire stapels complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones, complete all as specified and as directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0,complete all as specified and as directed.

M&L for Cutting holes brick walls built in cement mortar exceeding half brick thick wall but not exceeding one brick thick wall built in cement mortar for inserting hold fasts etc and making good the dismantled portion in plain cement concrete 1:2:4 type B1 & finished to match as per the existing finish complete all as specified and as directed. Note:- This item shall not be operated if hold fast holes are required at new location.

Excavation in post holes (or similar holes) each not exceeding 0.50 Cum getting out returning filling in ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance of not exceeding 50M and making good the entire area complete all as specified and as directed.

M & L for Mild steel work as in wind ties for roof including securing bolts etc and similar work conforming to fe 410-0 or fe 310-0.(including one coat of red oxide), complete all as specified and as directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved having tensile strength of 550 Mpa and grade AZ 150 as in roof covering and cladding complete all as specified and as directed.

M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (tubler, Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, fe 410-w(Gde E-250). complete all as specified and as directed.

M&L for Sand cushioning under interlocking tiles or filling under floors or in foundations including watering and consolidation all as specified and directed.

M&L for prepolished 60 mm thick rubber moulded double glossy coloured designer interlocking tiles made of M-35 design mix concrete of approved design and shape laid over 25 mm thick sand cushioing with the crushing strength not less than 250 Kg/Sqm complete all as specified and directed

S &F anodised aluminium snap grid frame work for false ceiling size of grid 600x600mm with Hangers fixed to roof slabs by means of ceilling cleats and expansion hold fasteners including taking down all as specified and directed by engr in charge.

M & L for Providing & fixing in repair false ceiling at all heights with Non asbestos desinger Gypsum board or ceiling tiles 4mm thick of Size 600x600mm/595 x 595 mm of approved texture, design and patterns, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed or laid/ inserted to timber/GI/Aluminium framework with screws including taking down all as specified and directed

S&F of 5mm thick plain colour PVC sheet hollow interlocking wall paneling of width 250mm for wall panelling inclusive of fixing on wall with screws and solvent alongwith PVC 'U' and 'L' beading at corner and end portion whereever required of matching colour including taking down of existing wall lining board of insulation board /panelling including cover fillets of any type and thick complete all as specified and as directed by Engr In Charge. Note: Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fance etc carrying out necessary relevant work and making good to match witch existing surfaces effected for this area etc.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, arrea of each tiles not exceeding 0.36 sqm, in floors etc. etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles colour, including 15mm thick screed bed (1:6),complete all as specified abd directed.

S&F in position anodised (minimum thickness of anodising shall be 15microns) aluminium door shutter weighing 0.55Kg/m and chowkhat made out of hollow extruded aluminium sections as detailed, each door having 02Nos disc or 'D' type handles, 02Nos aluminium tower bolts 200mm size, one brass mortice lock six levers with key in duplicate, 01xdoor closer fixed with aluminum hinges to chowkhat shutter, partly glazed with 5mm thick tinted glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading / gasket anodized aluminium beading screws, etc. including taking down and making good finish complete all as specified and as directed Section details: Chowkhat Frame: 101.60x44.45x1.6mm thick Shutter vertical/stile: 83.50x44.45x1.62mm thick Shutter middle rail: 83.50x44.45x1625mm thick

S&F anodised aluminium window and ventilator double shutter (glazed and wire gauzed), side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, anodised aluminium snap beading, 5mm thick glazed and wire cloth and scews anodised aluminium fittings such as peg stay 150mm long (01 No), hinges type B-21 100mm long (02 to 03 Nos) suitable handle (01 No) including frame work/chokhats Aluminium sec: 101.6x44.45x1.62mm thick., and .taking down and making good finish complete all as specified and as directed.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, thickness of laths in 1.00 mm, including 50mm shaft pipe, spring etc, complete: push pull or manual type complete all as specified and as directed.

S&F in repair, Harrison rails, mild steel, chromium plated with fixing brackets, stops, fancy type , 20mm bore having facny end knobs at each end, fixed with rawl plug to wall as in curtain rods complete all as specified and directed. Note: Design and quality shall be as approved by GE.

M & L for 75 mm thick PCC 1:3:6 type C2 using 20mm graded mechanically crushed stone aggregate as in flooring/ plinth protection finished even and smooth without using extra cement all as specified and directed.

M&L for complete removal of existing treatment and preparation of old plastered or un-plastered surfaces and applying two coats of oil bound distemper including a coat of plaster of paris putty of 1 mm thickness over plastered surface to make surface even and smooth, complete all as specified and directed.

M&L for Two coats of white wash on ceiling surface including preparation of old plastered surfaces. complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exceeding. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

M & L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic concealed coduit ISI marked with accessories concealed in wall/ceiling/truss including cutting chases, pinning in etc with PVC non metallic ISI marked terminal boxes concealed wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following :-

One light point controlled by one switch SP one way, complete all as specified and as directed.

One Fan & exhaust fan point controlled with one 5A switch, complete all as specified and as directed.

One 3 pin socket outlet 5Amps on independant board, complete all as specified and as directed.

M & L for point wiring for AC/ Geyser and one 3 pin socket outler 15 Amps independent with cable 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & includingPVC non-metallic concealed coduit including PVC bend, tee joints etc as per site requirement , ISI marked with accessories concealed in wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes conealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly, complete all as specified and as directed.

M&L for point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic concealed coduit including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 2.5sqmm as earth continuity conductor connected to common earth as earth dolly, complete all as specified and as directed.

S&F Modular Switch , 6Amp, One way, 1 module, ISI marked, complete all as specified and as directed.

.S&F Modular Switch , 16Amp, One way, 1 module, ISI marked, complete all as specified and as directed.

Modular Socket , 6 Amps, 2/3 pin combined 2 module, ISI marked, complete all as specified and as directed.

S&F Modular Socket , 16Amps, 6 pin combined 2 module, ISI marked, complete all as specified and as directed.

Taking down old unserviceable Ceiling rose and S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed.

S&F Modular white cover plate with Frame 3 Module, ISI marked, complete all as specified and as directed.

S&F Modular white cover plate with Frame 4 Module, ISI marked, complete all as specified and as directed.

S&F Modular white cover plate with Frame 6 Module, ISI marked, complete all as specified and as directed.

S&F Modular metal flush box 3 module, ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface, complete all as specified and as directed..

S&F Modular metal flush box 4 module, ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface, complete all as specified and as directed.

S&F Modular metal flush box 6 module, ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface, complete all as specified and as directed.

Taking down old unserviceabletube light and Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Taking down old unserviceable tube light and Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Taking down old rusted and broken DB and S&F in replacement 08 way Double door SPN type having protection IP 54, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following

Taking down old rusted and broken DB and Supply and fix sheet metal enclosure 12 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as specified and as directed.

Taking down rusted and unserviceable MCB . S & F MCB SPN 63 Amps, 10 KA rating complete all as specified and directed.

Taking down rusted and unserviceable MCB . S & F MCB SP 16-32 Amps, 10 KA rating complete all as specified and directed.

Taking down old unserviceable sub main and Supply and fixing submain wiring with proper colour coding, 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including concealded PVC pipe of suitable size not less than 25 mm , ISI marked including 1 single core cable with stranded copper conductor of size 4 Sqmm (green colour) for earthing.. Note : 2 runs of 4 Sqmm cable, 1 run for earthing of PVC Conduit and 1 run of 4 Sqmm cable shall be measured as 1 RM, for payment purpose.

S&F in replacement Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners, complete all as specified and as directed.

Taking down old U/S geyser pipe and Supply and fix hot water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as specified and as directed..

Taking down old U/S geyser pipe and Supply and fix cold water 450mm long PVC connector with brass adaptor, washer and fixing in position complete all as specified and as directed..

Taking down old U/S pipe and S & F GI Tube medium grade dia 20 mm dia concealed to walls for making water connection of Geysers complete all as specified and as directed..

Taking down old U/S Valve and S & F Stop valves 20 MM dia cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed bothends for ironpipe or for unions and fixed complete all as specified and directed by Engineer in Charge.

Swami Enterprises (BID ID -3521587)

M/S SINGH AND ASSOCIATES (BID ID -3519148)

Esha Engineers (BID ID -3517272)

Bairagi Builders (BID ID -3524449)

KULWANT SINGH (BID ID -3519581)

PARVINDER BHARDWAJ (BID ID -3519170)

M/S Gurpreet Singh (BID ID -3519519)

M/s Kang Builders (BID ID -3519613)