Replacement of LT Bare conductor by LT AB Cable

Amount

Annexure-A (LABOUR CHARGES)

Cartage of SP-23 Pole including Loading /Unloading from store centre at Haldwani/Rudrapur/Kashipur to work site (Distance 5 to 80 KM).

Cartage of PCC Pole 8.5 Mtr including Loading /Unloading from store centre at Haldwani/Rudrapur /Kashipur to work site (Distance 5 to 80 KM).

Cartage of AB Cable & other small material including Loading /Unloading from store centre at Haldwani/ Rudrapur /Kashipur to work site (Distance 5 to 80 KM).

Head load Cartage of SP-23 Pole from road to work site upto 0-1 Km distance including loading/unloading.

Head load Cartage of PCC Pole from road to work site upto 0-1 Km distance including loading/unloading.

Head load Cartage of AB Cable & other small material from road to work site upto 0-1 Km distance including loading/unloading.

Charges of Excavation of earth for SP-23 and PCC pole pit size 0.9*0.6*1/6 of pole length as per RESPO Spn. & instruction of Engineer In Charge.

Charges of Erection of structure of S.P.23 Pole complete in all work as per direction of Engineer in charge.

Charges of Erection of PCC Pole 8.5 Mtr. Long structure complete in all respect as per RESPO Spn. & instruction of Engineer In Charge.

Charges of Grouting of SP-23 Pole in size 0.45*0.45*1/6 of pole length by cc in ratio 1:4:8 and proper back filling as per RESPO Spn. & instruction of Engineer In Charge (297 Nos.)

Charges for welding at rusted/damaged existing pole with help of MS Angle 50x50x6 mm and remuffing of ST Ploe (125 Nos.)

Charges of Muffing of new ST SP 23 Poles with CC 1:2:4 block and 45 cm height from ground level including cost of required material as ballast, cement, sand etc complete in all respect as per direction of work incharge.

Charges of Fabrication of MS angle 50x50x6 mm (supplied by the department) with cutting, drilling holes and fabrication charges as required by Engineer in charge for proper completion

Charges of fixing of d bracket as required by Engineer in charge for proper completion

Charges of painting of SP-23 poles after removing of Rust by embry paper 2 coat of primer & 1 coat of al. paint as per norms & direction of Engineer in charge.

Charges of Fixing with excavation of earth of stay in size 0.6x0.6x.3 mtr complete work as per RESPO specification & as per direction of Engineer in charge.

Charges of Grouting of stay in ratio 1:4:8. (1 cemant:4 graded stone 20mm,8 course sand) including cost of cemant,sand & stone blast back filling soil bolder in pit etc. (0.108 cum each) as per RESPO specification & as per direction of Engineer in charge.

Charges of Removal & Re-connection of exising cable of single phase service connection same as per direction of Engineer-In-Charge.

Charges of Removal & Re-connection of exising cable of LT Three phase service connection same as per direction of Engineer-In-Charge.

charges of Erection of MS earthing rod 20x2500 mm by earth, electrod, connection with support by means of earth wire 7/10sqm with nut & bolts in all complete work as per direction of Engineer in charge

Charges of Dismentaling of Old ACAR Conductor L.T. Line including re-rolling cartage from site works to JE store ( L.T. Line 3 Phase 4 wire).

Charges of Dismentaling of Old ACAR Conductor L.T. Line including including re-rolling cartage ferom site works to JE store ( L.T. Line 2 Phase 3 wire)

Charges of Dismentaling of Old ACAR Conductor L.T. Line including including re-rolling cartage ferom site works to JE store ( L.T. Line 1 Phase 2 wire)

Charges of Laying, Stringing, sagging of ABC Cable3x120+1x95+1x16mm2 including fixing of Insulated,Piering Connector, Dead end clamp with I Hook, Suspension Clamp with I Hook in all complete work as per direction of Engineer-In-Charge.

Charges of Laying & Fixing Insulated Cable 1x50 sq.mm. as per direction of Engineer-In-Charge.

Charges of Installation & Fixing of L.T.Distribution Box & Connection of L.T. consumer including all complete work as per direction of Engineer-In-Charge.

Charges of back cartage of material from site to Rudrapur Store as per direction of Engineer-In-Charge.

Annexure-B (SUPPLY ITEMS)

Supply of 1x50 Sqmm cable (Insulated lead)

Supply of Stay Clamp made of MS Flat of size 50x6 Sqmm. Duly red oxide painted with suitable size 02 nos. Nut & Bolts (65x16mm) and washer as per specification of UPCL

Supply of M.S. half Clamp made of M.S. flate for round pole SP-23 of size 35x5sq.mm duly red oxide painted with suitable size with fitted nuts & bolts and washer for Fixing of M.S. Half Clamp for L.T. Distribution Box without cracks & burrs as per specification of UPCL

Supply of M.S. half Clamp made of M.S. flate for PCC Pole of size 50x6sq.mm duly red oxide painted with suitable size with fitted nuts & bolts and washer for Fixing of M.S. Half Clamp for L.T. Distribution Box without cracks & burrs as per specification of UPCL

Supply of M.S. Clamp made of M.S. flate for round pole SP-23 of size 50x6sqmm. duly red oxide painted with suitable size 02 nos. Nut & Bolts (65x16mm) and washer for Dead End clamp without cracks & burrs as per specification of UPCL.

Supply of M.S. Clamp made of M.S. flate for PCC Pole of size 50x6sqmm. duly red oxide painted with suitable size 02 nos. Nut & Bolts (65x16mm) and washer for Dead End clamp without cracks & burrs as per specification of UPCL.

Supply of M.S. Clamp made of M.S. flate for round pole SP-23 of size 50x6sqmm. duly red oxide painted with suitable size 02 nos. Nut & Bolts (65x16mm) and washer for Suspension clamp without cracks & burrs as per specification of UPCL.

Supply of M.S. Clamp made of M.S. flate for PCC Pole of size 50x6sqmm. duly red oxide painted with suitable size 02 nos. Nut & Bolts (65x16mm) and washer for Suspension clamp without cracks & burrs as per specification of UPCL.

Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer ( Sintex/RMC make or other ISO reputed company ) with Panel Lock with key) ( As per drawing attached )

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 120 Sqmm TYCO/RPG/3M Make

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 25 Sqmm TYCO/RPG/ 3M Make

Supply of Dead End Clamps with I Hook. As per drawing and UPCL Specification.

Supply of Suspension Clamps with I Hook. As per drawing and UPCL Specification.

Supply L.T. bar Natural Connector PG clamp 120sq.mm. to 25sq.mm. double bolt as per UPCL specifciation.

Supply L.T. bar Natural Connector PG clamp 120sq.mm. to 120sq.mm. double bolt as per UPCL specifciation.

Supply of Aluminium Strip 45mmx80mm for bushing including fabrication and drilling complete.

Supply of Aluminium Lugs ‘O’ type size 120mm.

Supply of Stay Insulator .

Supply of Aluminium Lugs ‘O’ type size 50mm

ASHOK KUMAR AND CO

RAVI CONSTRUCTION CO