CONSTRUCTION OF PINK TOILET AT DIFFERENT LOCATIONS IN SOUTH WEST ZONE, AHMEDABAD (ARC

Bill of Quantities

AHMEDABAD MUNICIPAL CORPORATION

I. Qty Items Rate Per Amount

Demolition & Dismantling work

1 Demolition of RCC work using Hydra Breacker including stacking

of servicable materials and disposal of unservicable materials with

50 all lead and lift.Removal Of Existing Building Foundation and 1047.38 Cu.M.

Super Structure If Any. (Item Code 20001A R&B SOR 2023-24 Pg

Demolition of Brick work and stone masonry including stacking of

serviceable materials and disposal of unserviceable materials with

all lead and lift.(ii) In Cement Mortar.Removal Of Existing Building

2 20 Foundation and Super Structure If Any.(Item Code 20003B R&B 544.95 Cu.M.

SOR 2023-24 Pg No 140)

3 Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materials and disposal of

0 unserviceable materials with all lead and lift.(Item Code 20007A-B

R&B SOR 2023-24 Pg No 140)

i 30 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 20 (ii) A.C. sheet roofing. 53.55 sq.mt

4 Dismentling steel work including distempering and stacking the

materials with all lead and lift.(Item Code 20003B R&B SOR 2023-

5 Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, hold fasts and other

16 attachment etc. complete and stacking them with in all lead and 165.9 Each

lift. (i)Notexceeding 3 Sq.M. in area.

6 Removing & Scrapping of Old deteriorated Plaster of any

thickness from Masonary / R.C.C. member including stacking of

513 serviceable material & disposal of un serviceable from site of work 12.92 Sq.M.

with all lead & lift.(Item Code 20003B R&B SOR 2023-24 Pg

7 Excavation for foundation including sorting out stacking of useful

material & disposing of excavated stuff upto 50 mt. lead. Loose &

0 Soft soil.Executed With Manual Labour (Item Code

04B001A/04B002A R&B SOR 2023-24 Pg No 50)

a 423 up to 1.5 mt. depth 201.81 Cu.M.

b 118 1.5 to 3.0 mt. depth. 222.72 Cu.M.

c Add extra for Disposing off the excavated stuff of above items for 14.11 Cu.M.

100 lead of (A) 50 m to 100 m(Item Code 20003B R&B SOR 2023-24

d Add extra for Disposing off the excavated stuff of above items for 28.22 Cu.M.

100 lead of (B) 100 m to 200 m

8 Provdg. & laying cement concrete 1:3:6 (1 cement : 3 coarse sand

: 6 hand broken stone aggregates 40 mm nominal size) and curing

0 complete excluding cost of form work in (Item Code 20003B R&B

SOR 2023- 24 Pg No 140)

a (A) Foundation and plinth (Item Code 20003B R&B SOR 2023-24 2652.1 Cu.M.

9 Supplying of graded hand brocken stone size of 90 mm to 127 mm 683 Cu.M.

30 at site (Rubble or Spoul)(Item Code 20003B R&B SOR 2023-24

10 Labour charges for spreading the spouls 90 mm to 127 mm thick 18 Sq.mt.

layer good earth filling in voids correcting the grade & camber

comp. with rolling, watering, incl. preparing thesurface by brushing

30 for removing all loose or dirts ect.comp. (Item Code 20003B R&B

SOR 2023-24 Pg No 140)

11 Provdg. & laying cement concrete 1:4:8 (1 cement : 4 coarse sand 2378.2 Cu.M.

: 8 hand broken stone aggregates 40 mm nominal size) and curing

complete excluding cost of form work in foundation& plinth.(Item

90 Code 20003B R&B SOR 2023-24 Pg No 140)

13 a Conveyance charges of earth lime, murrum, building rubbish, 73.39 Cmt

manure, garbage, sludge, excavated rock, fly ash, aggregate of

200 any kind etc. comp. upto 5 km lead.(Item Code 20003B R&B SOR

b 600 Extra For Lead Above 5 km & upto 6 km 7.31 Cmt

c 500 Extra For Lead Above 6 km & upto 7 km 7.31 Cmt

d 200 Extra For Lead Above 7 km & upto 8 km 7.31 Cmt

e 200 Extra For Lead Above 8 km & upto 9 km 7.31 Cmt

f 200 Extra For Lead Above 9 km 7.31 Cmt

14 Filling in plinth with sand under floors including watering, ramming, 336.34 Cu.M.

10 consolidating, compacting and dressing etc. completed.(Item

Code 20003B R&B SOR 2023-24 Pg No 140)

15 Filling in foundation and plinth with murrum or selected soil in 215.54 Cmt

layers of 20 cm. thickness including watering, ramming and

450 consolidating etc. Complete. (Item Code 20003B R&B SOR 2023-

16 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

0 plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional(Item Code 20003B R&B SOR 2023-24 Pg No 140)

a (a) in foundation & Plinth(Item Code 20003B R&B SOR 2023-24 2814.9 Cu.M.

b Extra for brick work in superstructure above plinth level upto floor 181.5 Cu.M.

110 two level (B) Conventional (Item Code 20003B R&B SOR 2023-24

17 (i) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar

1:4 (1Cement : 4 - coarse sand ) in foundation and plinth (B)

Conventional.(Item Code 20003B R&B SOR 2023-24 Pg No 140)

a in foundation and plinth(Item Code 20003B R&B SOR 2023-24 407 Sq.M.

b Extra for half brick masonry in superstructure above plinth level 35.2 Sq.M.

80 upto floor two level. (B) Conventional (Item Code 20003B R&B

SOR 2023-24 Pg No 140)

Providing and laying controlled cement concrete M.250 and curing 4127.65 Cu.M.

complete excluding the cost of formwork and reinforcement for

18a 30 reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete.(Item Code 20003B R&B SOR 2023-

18b Providing and laying controlled cement concrete M.250 and curing 4313.45 Cu.M.

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

21 columns and Mass concrete.(Item Code 20003B R&B SOR 2023-

24 Pg NoPg No 140)

18c Providing and laying controlled cement concrete M.250 and curing 4299.67 Cu.M.

complete excluding the cost of formwork and reinforcement for

20 reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete.(Item Code 20003B R&B SOR 2023-

18d Providing and laying controlled cement concreteM.250 and curing 4375.37 Cu.M.

complete excluding the cost of formwork and reinforcement for

6 reinforced concrete work in (D) Columns, Pillars posts and struts,

upto floor two Level(Item Code 20003B R&B SOR 2023- 24 Pg No

19a Providing and laying controlled cement concreteM.200 and curing 3874.2 Cu.M.

complete excluding the cost of formwork and reinforcement for

15 reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete (Item Code 20003B R&B SOR 2023-

19b Providing and laying controlled cement concrete M.250 and curing 4187.7 Cu.M.

complete excluding the cost of formwork and reinforcement for

30 reinforced concrete work in (A) Foundations, footings, Base of

columns and Mass concrete.(Item Code 20003B R&B SOR 2023-

19c Providing and laying controlled cement concrete M.250 and curing 4255.9 Cu.M.

complete excluding the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

6 columns and Mass concrete.(Item Code 20003B R&B SOR 2023-

19d Providing and laying controlled cement concrete M.200 and curing 4115.1 Cu.M.

complete excluding the cost of formwork and reinforcement for

6 reinforced concrete work in (E) Staircases excluding landing upto

floor two leve (Item Code 20003B R&B SOR 2023-24 Pg No 140)

20a Providing and laying cement concrete work 1:2:4 (1- Cement : 2- 3624.5 Cu.M.

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

and curing complete excluding cost of formwork and reinforcement

6 for reinforced concrete work in (A) Foundations, footings, Base or

columns and Mass concrete (Item Code 20003B R&B SOR 2023-

20b Providing and laying cement concrete work 1:2:4 (1- Cement : 2- 3687.2 Cu.M.

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

and curing complete excluding cost of formwork and reinforcement

for reinforced concrete work in (B) Slabs, landing, shelves,

Balconis , Lintels, Beams, Girders and Cantilever upto floor two

level. (Item Code 20003B R&B SOR 2023-24 Pg No 140)

20c Providing and laying C.C. pavement of mix M-25 with ready mixed 8277.55 Sqmt

concrete from batching plant. The ready mixed concrete shall be

laid and finished with screed board vibrator , vacuum dewatering

process and finally finished by floating, brooming with wire brush

2 and including panel shuttering etc. complete as per specifications

and directions of Engineer- incharge.(Item Code 20003B R&B

20d Providing and laying and fixing 25 mm thick expansion joint by 871.13 Sqmt

hydrocell semi rigid UV resistance with high performance

3 laminated closed cell polythene foam joint filler in sheet foam as

directed, etc. complete. (Item Code 20003B R&B SOR 2023-

21 Providing form work in ordinary timber planking so as to give a

rough finish including centering, shuttering, strutting and propping

etc. height of propping and centering below supporting floor to

0 celling not exceeding 4 M & removal of the same for in situ

reinforced or plain concrete work in(Item Code 20003B R&B SOR

a (A) Foundation, footings, bases of columns etc. and mass 114.45 Smt

b (B) Flat surface such as soffits of slabs, landing and the like (I) 168 Smt

160 Floors etc. 200 mm in thickness.

c (C)Vertical surface such as walls (any thickness) partitions and the Smt

20 like including attached buttresses & string course & the like.

0 (D) Columns, pillars, posts & struts.

d 20 (1) Square, rectangular, polygonal in plan 198.45 Smt

e 20 (2) Circular or curved in plan. 281.4 Smt

f (H) (1) Sides and soffits of beam, haunchings cantilevers, girders, 128.1 Smt

bressumers, Coping and lintels not exceeding 1 M in depth.

g (2) Sides and soffits of beam, haunchings cantilevers, girders, 173.25 Smt

50 bressumers and lintels exceeding 1 M in depth.

h (L) chullah hoops, weather sheds, chhajas, carbels etc including 103.85 Smt

i (M) Staircase with-sloping or stepped soffits incl. risers & strings 161.7 Smt

excluding landing.

22 Providing T.M.T Fe 500D bar reinforcement for R.C.C. work

including bending, binding and placing in position complete up to

0 any floor level.(Item Code 20003B R&B SOR 2023-24 Pg No 140)

a 8400 All Floor Level 71.71 Kg.

23 Providing and laying polished Kota stone slab (Polished / River 807.45 Sq.M.

Finish, Green colour ) flooring over 20 mm. (average) thick base of

cement mortar 1:6 (1 cement : 6 coarse sand) or lime mortar 1:1.5

20 laid over and joined with grey cement slurry including rubbing and

polishing complete.25 mm th.(Item Code 20003B R&B SOR 2023-

24 Providing and laying polished Kota stone slab 25 mm. thick in 932.4 Sq.M.

Platform ,Riser of Stair , Skirting, Tread , dado and pillars laid on

10 mm. thick cement mortar 1:3 (1 cement : 3 coarse sand) jointed

100 with grey cement slurry including rubbing and polishing and

MAking groove where it is Required etc. compl (Item Code

20003B R&B SOR 2023-24 Pg No 140)

25 Providing and laying white/Colur glazed tiles 6 mm thick in flooring 726.6 Sq. M.

treads of steps and landing laid on a bed of 12 mm thick cement

5 mortar 1:3 (1 cement : 3 coarse sand) finished with flush pointing

in white cement. (Item Code 20003B R&B SOR 2023-24 Pg No

26 Providing and layingWhite / Colour glazed tiles of size 600 951.3 Sq. M.

mmx300mm x 8 mm / 300 mmx 450mm x 8 mm in skirting, risers

of steps, Floor and dedo on 10 mm. thick cement plaster 1:3 (1

cement : 3 coarse sand) and jointed with white cement slurry.etc.

90 complete in all respects etc. complete as direction by E.I.C.(Item

Code 20003B R&B SOR 2023-24 Pg No 140)

27 Providing and laying marble stone slab flooring over 20 mm. 1752.45 Sq. M.

(Average) base of cement mortar 1:6 (1 cement: 6 coarse sand) or

L.M. 1:1.5 laid and jointed with grey cement slurry including

3 rubbing and polishing complete: (A) Marble slab 25 mm. thick.

(Item Code 20003B R&B SOR 2023-24 Pg No 140)

28 Providing and laying Vitrified tiles in floor with different sizes 1537.4 Sq. M.

(thickness to be specified by the manufacturer), with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturerin all colours and shade, laid with

cement based high polymer modified quick set tile adhesive (water

200 based) conforming to IS : 15477, in average 6 mm thickness,

including grouting of joints (Payment for grouting of joints to be

made separately). Size of Tile 600x600 mm (Item Code 20003B

R&B SOR 2023-24 Pg No 140)

29 Providing and laying Vitrified tiles in different sizes (thickness to be 1676.15 Sq. M.

specified by the manufacturer), with water absorption less than

0.08% and conforming to IS: 15622, of approved brand &

manufacturer, in all colours and shade, in Dado, skirting, riser of

steps, laid with cement based high polymer modified quick set tile

500 adhesive (water based) conforming to IS: 15477, in average 6 mm

thickness, including grouting of joints (Payment for grouting of

joints to be made separately). Size of Tile 600x600 mm (Item

Code 20003B R&B SOR 2023-24 Pg No 140)

30 Grouting the joints of flooring tiles having joints of 3 mm width, 258.65 Sq. M.

using epoxy grout mix of 0.70 kg of organic coated filler of desired

shade (0.10 kg of hardener and 0.20 kg of resin per kg), including

filling / grouting and finishing complete as per direction of

Engineer-in-charge. Size of Tile 600x600 mm (Item Code 20003B

R&B SOR 2023-24 Pg No 140)

31 Providing and laying Ceramics tiles 6 to 8 mm thick in flooring, 696.15 Sq. M.

treads of steps, landing and dedo on 12 mm. thick cement plaster

1:3 (1 cement : 3 coarse sand) and jointed with white cement

slurry etc. comple(Item Code 20003B R&B SOR 2023-24 Pg No

140)te in all respects etc. complete as direction by E.I.C. (Item

Code 20003B R&B SOR 2023-24 Pg No 140)

32 Providing & Laying 18 mm thick Mirror polish granite For flooring , 2672 Sq. M.

counter , stair -riser , tread , skirting , dedo , Jambs etc. machine

cut or chiselled on bed of cement mortar 1:1 pointing with neat

cement slurry incl. moulding, Making grooves where it is required

etc. comp. as per instruction of engineer in charge.(Item Code

20003B R&B SOR 2023-24 Pg No 140)

33 Provdg.15 to 20 mm. thick Finish / Mala cement plaster in single 127.05 Sq.M.

coat on fair side of brick / concrete walls for interior plastering upto

1040 floor four level and finished even and smooth in C.M.1:4.(Item

Code 20003B R&B SOR 2023-24 Pg No 140)

34 Providing and mixing water proofing materials in cement mortar in 45.78 Per Bag

proportion recommended by the manufacturer. etc. comp. as per of

30 instruction of engineer in charge.(Item Code 20003B R&B SOR KgofCe

2023-24 Pg No 140) ment

35 Providing 20 mm th. Double coat Sand face / Mala Cement Plaster 198.45 Sq.M.

on Walls upto floor four level Above Ground level consisting of

mm th. Backing coat of C.M. 1:3 ( 1 cement : 3 Ssand ) & 8 mm th.

400 Finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) ets. Complete.

(Item Code 20003B R&B SOR 2023-24 Pg No 140)

36 White / Color washing with lime on undecorated wall surfaces (two 8.19 Sq.M.

coats) to give an even shade including thoroughly brooming the

15 surface to remove all dirt, dust mortar drops and other foreign

matter. (Item Code 20003B R&B SOR 2023-24 Pg No 140)

37 Finishing walls with Acrylic Smooth exterior paint of required 166.85 Sq.M.

shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm

over and including priming coat of exterior primer applied @

kg/10 sqm) (Item Code 20003B R&B SOR 2023-24 Pg No 140)

38 P./L. METALIC HERITAGE SURFACE TEXTURE Providing and 815.9 Sq.M.

fixing of HERITAGE textured homogeneous wall finishing system

from BAKELITE HYLAM LTD or equivalent make consisting of a

two component system of (25 kgs per Pack) made of 92% silica

particles coated with fade resistant pigments, 100% acrylic

polymer bonding agent (5kgs per pack) with the applied thickness

400 of the coating being between 0.8mm-1.2mm to be applied on

acured, smooth level plaster without keying, as per the

shades/combinations approved, as per the manufacturer

directions, for usages, tobe applied by an approved applicator of

the manufacturer, as per the directions / supervision of the

engineers in charge, all complete. (Item Code 20003B R&B SOR

39 Wall Painting (two coats) with plastic emulsion / Oil paint of 52.2 Sq.M.

approved brand and manufacture and of shade required on

undecorated wall surfaces to give an even shade, over and

including a priming coat with alkali resistance primer of approved

300 brand and manufacture after thoroughly brushing the surface free

from mortar droppings, and other foreign matter and also including

preparing the surface even and sand -papered smooth(Item Code

20003B R&B SOR 2023-24 Pg No 140)

43 Constructing brick masonry chamber for under ground C.I. 336 No.

Inspection chamber and bends with bricks having croshing

strength not less than 35 Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Lightduty) 455mm x 610 mm intenal dimensions total

weight of cover with frame to be not less than 38 Kg. (Wt. of cover

23Kg.) and Wt. of frame 15Kg.) (R.C.C.top slab with 1:2:4 mix (1-

cement:2-coarse sand:4-graded stone aggregate 20mm size)

3 foundation concrete 1:5:10 inside plaster 15 mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside dimensions

mm x 610 mm and up to 850 mm deep (Item Code 20003B R&B

SOR 2023-24 Pg No 140)

44 Constructing Manhole with R.C.C. top slab in 1:2:4mix (1-cement: 17656. N

2-coarse sand:4-graded stone aggregate 20 mm nominal size) 8 o.

foundation concrete 1:3:6 mix (1-cement:3-coarse sand:6-Brick

bats 40+50mm size) inside plastering 15mm thick with Cement

Mortar 1:5 (1-Cement:5-coarse sand) finished with a floating coat

of neat cement and making channels in cement concrete 1:2:4 mix

(1- Cement:2 -Coarse sand:4-stone aggregate 20 mm nominal

size) finished smooth complete including curing and festing (i)

Inside size 900mm x 1200mm and up to 1.5M. deep including C.I.

cover with frame size 560 mm diameter total weight of cover and

frame to be not less than 128kgs. (Wt. of cover 64Kg. and Wt. of

frame 64Kg.) (A) With 230 mm thick walls of brick masonry using

brick having crushing strength not less than 35Kg./Sq.cm. in

Cement Mortar 1:5 (1-Cement: 5-Coarse sand) (2)B type depth up

45a Providing and fixing C.P. brass bib cock of approved quality 434. No.

conforming to IS:8931 of Approved make as approved by engg. in

15 charge all complete. 15 mm Nominal Bore Dia (Item Code 20003B

R&B SOR 2023-24 Pg No 140)

45b Providing and fixing C.P. brass angle valve of approved quality 500.35 No.

conforming to IS:8931 of Approved make as approved by engg. in

30 charge all complete. 15 mm Nominal Bore Dia (Item Code 20003B

R&B SOR 2023-24 Pg No 140)

45c Providing and fixing C.P. brass shower rose with 15mm or 20mm 322 No.

1 inlet Shower Arm.(A) 100mm dia. Each (Item Code 20003B R&B

SOR 2023-24 Pg No140)

46 Provdg. & laying S.W. Gully trap with C.I. garting brick masonry 1283.1 No.

chamber & water tight C.I. cover with frame of 300 mm x 300 mm

5 size ( inside) with standard weight. sqare mouth trap size 150

x100 mm P trap (Item Code 20003B R&B SOR 2023-24 Pg No

47 Providing erecting and fixing double coated ISI water tank of 4.61 Litre

required capacity each with all necessary fittings and connection

5000 etc. complete on terrace(Item Code 20003B R&B SOR 2023-24

48 Extra rate over item of excavation of earth for excavation of 80 Sq.M.

asphalt pavement/RCC of thickness up to 0.20 meter including

demolishing the asphalt carpet, metal, soiling / cutting

41.67687 Reinforcement etc.comp. with stacking the material as directed.-

up to 0.20 meter thickness(Item Code 20003B R&B SOR2023-24

49 P/F PVC / C.I. (span) nahni trap and all of the following nominal 368.55 No.

dia of self cleanising design with C.I.Screw down or hinged

20 greeting inclusive cost of cutting and making good the walls and

floors for drain 75 mm dia. etc. comp. (Item Code 20003B R&B

SOR 2023-24 Pg No 140)

50 a Providing laying and jointing in true line and level 15mm dia. 84.87 Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

55 with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

50b Providing laying and jointing in true line and level 25mm dia. 107.29 Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

140 concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. (Item Code 20003B R&B

SOR 2023-24 Pg No 140)

50c Providing laying and jointing in true line and level 32mm dia. 139.2 Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

10 concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.(Item Code 20003B R&B

SOR 2023-24 Pg No 140)

50d Providing laying and jointing in true line and level 40mm dia. 173.03 Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

30 concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials(Item Code 20003B R&B

SOR 2023-24 Pg No 140)

50e Providing laying and jointing in true line and level 50mm dia. 228.61 Rmt

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

30 concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials (Item Code 20003B R&B

SOR 2023-24 Pg No 140)

51 Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation

(NSF) seal for potable water of following dia. nominal bore tube

0 fittings and clamps including making good the wall, ceiling and

floor etc. complete(Item Code 20003B R&B SOR 2023-24 Pg No

a 1 15 mm 137.55 Rmt

b 1 20 mm 179.55 Rmt

c 1 25 mm 228.87 Rmt

d 1 32 mm 317.9 Rmt

e 1 40 mm 426.36 Rmt

f 1 50 mm 655.29 Rmt

52 Provdg. And fixing to wall ,ceiling and floor 10.00 kg. F/Sq.Cm2

working pressure polythelene pipes of the following outside

diameter, low, density, complete with special flange compression

0 type fittings, wall clips etc. making good wall ceiling and floor.(Item

Code 20003B R&B SOR 2023-24 Pg No 140)

a 90 (A) 75mm dia 186.9 Rmt

b 90 © 110 mm dia 333.9 Rmt

53 Providing and fixing water closet squatting Pan (Indian type W.C. 617.4 No.

Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to

4 be measured and paid for separately) (A) Vitreous China.(I) Long

pattern = White colour (Item Code 20003B R&B SOR 2023-24 Pg

54 Providing and fixing 100mm size P or S trap for water closet 207.9 No.

squatting pan including jointing the trap with the pan and soil pipe

4 in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous

China.(Item Code 20003B R&B SOR 2023-24 Pg No 140)

55 Providing and fixing in Cement Mortar 1:3 (1Cement: 3-coarse 89.99 No.

sand)a, pair of white vitreous China 250mm x 130mm x 30mm

4 footrest to long pattern squatting pan water closet.(Item Code

20003B R&B SOR 2023-24 Pg No 140)

56 Providing and fixing white vitreous china extended wall mounting 13036.55 No.

water closet of size 780x370x690 mm of approved shape

including providing & fixing white vitreous china cistern with dual

flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/

12 8 litres), including seat cover, and cistern fittings, nuts, bolts and

gasket etc complete. (Item Code 20003B R&B SOR 2023-24 Pg

57 Providing and fixing chromium plated brass half trun flush cock of

0 approved quality including fixing in pipe line etc. complete. (Item

Code 20003B R&B SOR 2023-24 Pg No 140)

58 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube 299.35 No.

upto 1 metre long with S.S. triangular plate to Eureopean type

12 W.C. of quality and make as approved by Engineer - in -

charge.,(Item Code 20003B R&B SOR 2023-24 Pg No 140)

59 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink 3337.85 No.

as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,

including painting of fittings and brackets, cutting and making good

3 the walls wherever required :Kitchen sink without drain board

610x460 mm bowl depth 200 mm (Item Code 20003B R&B SOR

60 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. 3158.7 No.

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making good

6 the walls wherever require:White Vitreous China Wash basin size

550x400 mm with a pair of 15 mm C.P. brass pillar taps (Item

Code 20003B R&B SOR 2023-24 Pg No 140)

61 Provdg. & fixing 600mm x 450 mm Bevelled edge mirror of 609 No.

superior glass mounted of .6 mm th. A.C. sheet or plywood sheet

6 and fixed to wooden pluge with C.P. brass screws and

washers(Item Code 20003B R&B SOR 2023-24 Pg No 140)

62 Providing and fixing mirror of superior glass (of approved quality) 1817.2 No.

and of required shape and size with plastic moulded frame of

6 approved make and shade with 6 mm thick hard board backing :

Rectangular shape 1500x450 mm (Item Code 20003B R&B SOR

63 Providing and fixing PTMT liquid soap container 109 mm wide, 146.3 No.

125 mm high and 112 mm distance from wall of standard shape

with bracket of the same materials with snap fittings of approved

4 quality and colour, weighing not less than 105 gms.(Item Code

20003B R&B SOR 2023-24 Pg No 140)

64 Providing and fixing toilet paper holder.(A) C.P. Brass (Item Code 401.13 No.

65 Provdg. & fixing C.P..Brass towal rail complete with C.P. brass 533 No.

brackets fixed to wooden plugs with C.P. Brass screws.(600 mmx

6 20 mm size) (Item Code 20003B R&B SOR 2023-24 Pg No 140)

66 Providing and fixing ball valve (brass) of approved quality, High or

0 low pressure, with plastic floats complete :(Item Code 20003B

R&B SOR 2023-24 Pg No 140)

a 10 (A) 15 mm dia 348.85 No.

b 6 (B) 20 mm dia 397.45 No.

c 41 (C) 25 mm dia 399.15 No.

67 Providing and fixing gun metal gate valve with C.I. wheel of

0 approved quality (screwed end) : (Item Code 20003B R&B SOR

a 6 20 mm dia 532.35 No.

b 6 25 mm dia 461.75 No.

c 25 32 mm dia 589.9 No.

d 6 40 mm dia 707.3 No.

e 10 50 mm dia 878.25 No.

68 Provdg. & fixing C.P.brass pillar tap capstan head, screw down 360.7 No.

high pressure with screws shanks and back nuts. (A) 15 mm dia

(Item Code 20003B R&B SOR 2023-24 Pg No 140)

69 Providing and laying broken chine mosaic flooring for terrace 502.95 Sq. M.

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

180 bring mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.(Item Code

20003B R&B SOR 2023-24 Pg No 140)

70 Providing and applying fibre reinforced elastomeric liquid water 474.15 Sq. M.

proofing membrane with resilient acrylic polymers having Sun

Reflectivity Index (SRI) of 105 on top of concrete roof in three

coats @10.76 litre/ 10 sqm. One coat of self-priming of

elastomeric waterproofing liquid (dilution with water in the ratio of

3:1) and two coats of undiluted elastomeric waterproofing liquid

270 (dry film thickness of complete application/system not less than

500 microns). The operation shall be carried out after scrapping

and properly cleaning the surface to remove loose particles with

wire brushes, complete in all respect as per the direction of

Engineer-in-Charge.(Item Code 20003B R&B SOR 2023-24 Pg No

71 Providing and laying Cement concrete flooring for I.P.S. 1:2:4 (for 232.05 Sq.M.

Indian Patent Stones) (1 cement: 2 coarse sand: 4 graded stone

aggregate 20 mm. nominal size) lain in layer finished with a

floating coat of net cement- 50 mm th by addition of waterproof

chemical etc. complete.(Item Code 20003B R&B SOR 2023-24 Pg

75 Providing and fixing stainless steel ( Grade 304) railing made of 612.25 Kg.

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with

256 suitable arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall be

considered Including fixing accessories such as nuts, bolts,

fasteners etc.).(Item Code 20003B R&B SOR 2023-24 Pg No 140)

76 Providing and fixing in position collapsible steel shutters with 3652.11 Sq. M.

vertical channels 20x10x2 mm braced with flat iron diagonals 20x5

mm size with top & bottom rails of T-iron 40x40x6 mm with 38 mm

dia. Steel pulleys complete with bolts , nuts , locking arrangement

26 , stoppers , handles including applying a priming coat of red lead

paint & two coats of enamel paint of selected shade & approved

make.(Item Code 20003B R&B SOR 2023-24 Pg No 140)

77 Providing corrugated G.I. sheet of class-3 roofing fixed with 793.1 Sq.M.

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

bitumen and G.I. limpet washer or G.I. limpet washer. filled with

1 white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet..(Item Code 20003B R&B SOR

78 Providing valleys 900mmoverall in plain 1.6mm 966 Sq.mt.

thickG.I.sheetfixedwithG.I.JorLHooks,Boltsand nuts glavanised

1 iron J or LHooksBolts andnuts 8mm dia G.I. Limpet and bitumen

washers complete. .(Item Code 20003B R&B SOR 2023-24 Pg No

79 Providing and fixing window having extruded aluminum Colour 2002.17 Sq. M.

anodized section frame main outer size 63.50 x 38.10 x

mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size

mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member

of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with

sliding shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with

mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for

window.(Item Code 20003B R&B SOR 2023-24 Pg No 140)

80 roviding and fixing standared extruded of alluminium section of 1373.45 Sq. M.

size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour

anodized alluminium frame for ventilation with 5 mm thick frosted

41 glass as details etc complete for Ventilation(Item Code 20003B

R&B SOR 2023-24 Pg No 140)

81 Providing and fixing standared extruded of 1288.93 Sq. M.

alluminiumsectionofsize63.50x38.10x1.95mm @Wt 1.094Kg / Rmt

with colour anodized alluminium framewith 5mm thick transparent

bronze colour tinted float glass with colour

6 anodizedalluminiumframe for ventilationwith5 mm thick frosted

glass as details etc complete for.window.(Item Code 11029 R&B

SOR 2023-24 Pg No 140)

82 Providing and fixing ISI marked 35 mm thick flush door shutters

conforming to IS : 2202 (Part I) decorative type, core of block

board construction with frame of 1st class hard wood and well

matched teak 3 ply veneering with vertical grains or cross bands

and face veneers on both faces of shutters with 1.00 mm thick

Decorative Laminated Sheet on both faces of shutters including

0 ISI marked Stainless Steel butt hinges, bright /matt finished 125

mm Stainless Steel handles of approved quality & make, ISI

marked oxidised M.S. door latches of Size 300x20x6 mm

conforming to IS:5930 with necessary screws etc. complete as per

direction of Engg. incharge. (Approved Rate)

a 109 Flush shutter with both side laminate 4238.5 Sq.M.

83 Providing and fixing 35 mm th. Shutters for doors windows &

clearstory windows incl. wood frames as specified 12 cm. x 7cm.

size incl. anodised alluminium fixtures and fastenings including

0 primer coat of approved quality and two coats of oil paint etc.

complete. (Item Code 10032A/B/C R&B SOR 2023-24 Pg No 140)

a 2 Fully glazed 4788.5 Sq. M.

b 2 Fully panelled 5478.89 Sq. M.

c 2 Partly panelled and partly glazed 5133.69 Sq. M.

84 Providing and fixing FRP frame size 125x65 mm and 35mm thick 1999.98 Sq.M.

FRP shutter with wood grain raised panneled design finish shutter

having extra reinforcement on sides & edges in Gel coat finish.

The core of the shutter & frame is to be filed up with injected

polyurethene foam done in situ alongwith embedded wooden

pieces for stiffening & also taking hinges & fintures. The whole

10 FRP frame & shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with fastener sleeve & alluminium fixtures &

fastenings. (Item Code 10036 R&B SOR 2023-24 Pg No 90)

85 Making connection of drain or sewer line with existing manhole

including breaking into and making good the walls, floors with

cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) cement plastered on both

0 sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished

with a floating coat of neat cement and making necessary

channels for the drain etc. complete (Approved Rate)

85 6 For Pipe 100 mm to 250 mm diameter 683.7 No.

86 6 For Pipe 250 mm to 300 mm diameter 785.9 No.

87 6 For pipes 350 to 450 mm diameter 1134.65 No.

88 Making connection of G.I. distribution branch with G.I. main of

following sizes by providing and fixing tee, including cutting and

threading the pipe etc. complete : (Item Code 23003 R&B SOR

a 0 25 to 40 mm nominal bore 757.1 No.

b 6 50 to 80 mm nominal bore 600.08 No.

89 Providing throating or plaster drip, grooves and moulding to Wall , 27.5 Rmt

1539 R.C.C. chajja and slab.(Approved Rate)

90 Cementvata10cm.x10cm.sizequarterroundincement mortar 1:1 (1 2.55 Rmt

129 cement : 1 sand including neat cement finishing) (Item Code 15

R&B SOR 2023-24 Pg No 186)

91 Carring out plinth treat ment to post construction/ existing structure 104.9 Sq.mt

by spraying chemical solution for termite control treatment

including labour and material consist ment withI.S.I specification.

Using Chlordene and Chiorpur files 20EC. As Per 6131_ paret- II

Consentration Weight one percent is recommended i.e one litre

20EC chemical emulsion with19 liter give1% concrentration

inclusive of one litre chemical emulsion appication at the rate of

Litre chemical/ Sqm of surface is recommended as per I.S (Item

Code 22007A R&B SOR 2023-24 Pg No 157)

92 Carrying out wall treatment for termite control 37.34 Smt

includingsprayingwithchemicalsolutioninoilbase including

labourandmaterialUsingChlorpyriphos 20ECAsper IS6313part- II

(1%concentrationby mass) is recommended i.e one litre chemical

emulsion diluted with 19 liter oil base. Total solution will be

52 liters inclusive of one liter

chemicalemulsionapplicationattherateof7.5litre chemical

/Sqmofsurfaceisrecommendedasper I.S..(Item Code 22008 R&B

SOR 2023-24 Pg No 157)

93 Providing and Laying of Rubber Moulded Paver Block 429 Sq.mt.

Grey/Coloured 60 mm thick, M-35 Grade of any size ; shape

(Usually Uni-Paver Blocks) using black trap good grading and

specification. The paver block shall be mechanically compacted.

The work of paving blocks shall be executed in line and level by

skill mason of flooring work only. It should be laid in such a way

that the no cutting of the paver block to be necessary. if cutting of

paver block necessary then it should be cut by machine only and

206 carting. The finished surface of the paver block shall have

resonably good, plain finished. Paver blocks shall be compacted

and shall be relaid if necessary. Gravel or such type of materials

shall not be allowed for production. Laying on 5 cms thick sand

bedding. (Item Code 20003B R&B SOR 2023-24 Pg No 140)

94 Supplying and fixing of 300 mm-L x 150 mm-B x 380mm-H Kerb 350.89 R.mt.

block for Footpath in M-20 grade using 20mm nominal size black

trap aggregate of Sevaliya/Timbaor equivalent quality for pre-cast

blocks, reasonablyexposed finish/ formwork , mould with well

equippedwith vibratory system for kerb stones of approveddesign

including curing, etc. complete, including thecost of formwork etc.

complete. The rate shall alsoinclude necessary cutting of asphalt,

fixing the Kerbstones in line and level on 5 cm thick sand bedding

withnecessary equipments and materials. The rate shall

alsoinclude the flush pointing in CM (1:3) for all joints of

72 thekerbstones. Filling of zari alone the sides of the kerbstone fixed

with Bituminous concrete Bituminousconcrete / C.C. mixed in

proper position to flush withthe road surface as directed by

Engineer in change toform a portable mixture. a) Laying on 5 cm

thick Sand Bedding (Approved Rate)

95 Designing, fabricating, testing, installing and fixing in position 4474.2 Sq.mt.

Curtain Wall with Aluminium Composite Panel Cladding, with open

grooves for linear as well as curvilinear portions of the building

for all heights and all levels etc. including: (Approved Rate)(a)

Structural analysis & design and preparation of shop drawings for

pressure equalisation or rain screen principle as required, proper

drainage of water to make it watertight including checking of all the

structural and functional design. (b) Providing, fabricating and

supplying and fixing panels of aluminium composite panel

cladding in pan shape in metalic colour of approved shades made

out of 4mm thick aluminium composite panel material consisting of

3mm thick FR grade mineral core sandwiched between two

Aluminium sheets (each 0.5mm thick). The aluminium composite

panel cladding sheet shall be coil coated, with Kynar 500 based

PVDF / Lumiflon based fluoropolymer resin coating of approved

colour andshade on face # 1 and polymer (Service) coating on

face # 2 as specified using stainless steel screws, nuts, bolts,

washers, cleats, weather silicone sealant, backer rods etc .(c) The

fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip

52 Galvanised with serrations and serrated washers to arrest the

wind load movement, fasteners, SS 316 Pins and anchor bolts of

approved make in SS 316, Nylon separators to prevent bi- metallic

contacts all complete required to perform as per specification and

drawing The item includes cost of all material & labour component,

the cost of all mock ups at site, cost of all samples of the individual

components for testing in an approved laboratory, field tests on

the assembled working curtain wall with aluminium composite

panel cladding, cleaning and protection of the curtain wall with

aluminium composite panel cladding till the handing over of the

building for occupation. Base frame work cost for ACP cladding is

included in this item rate. The Contractor shall provide curtain wall

with aluminium composite panel cladding, having all the

performance characteristics all complete , as per the Architectural

drawings, as per item description, as specified, as per the

approved shop drawings and as directed by the Engineer-in-

Charge. However, for the purpose of payment, only the actual

area on the external face of the curtain wall with Aluminum

Composite Panel Cladding (including width of groove) shall be

measured in sqm. up to two decimal places.

96 Providing and Fixing Box type metal letters forming composite box

made from 1mm thick stainless steel plate of grade 304 having

brush finish of following font size to be fixed at Main Gate in

0 english and or Gujrati and including fixing charges. etc. complete

as per direction of Engg. incharge. for Payment Purpose Height of

Letter will be measured.

a 1847 Upto 300 mm Height (Approved Rate) 110.74 R.Inch

97 Providing and Fixing MURAL made out of 2mm thick s.s. plate 8028.8 Sq.mt.

grade 304, including making necessary design as per Architect

dwg. Through laser cutting including connection to the

11 R.C.C./Masonary with necessary frame,anchor fastnuts,M.S.Plate

etc. complete as per direction of Engg. incharge. (Approved Rate)

98 Providing and Fixing Sinage - internal and external signage

boards with Vinyle Text on ACP sheet / 2 mm th. S.S. Plate etc.

2565 complete as per direction of Engg. incharge. (Approved Rate)

Electrical Work

I. Items Unit Rat Uni Total Amount in

I. Items Unit Rat Uni Total Amount in

Qty Unit in R t Rs

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC

1 / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

250 flushed on wall/ceiling complete 445 Pt

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME four or more

step type electronic Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below

type of pipe erected with 6A Modular type switch and hum free EME

four or more step type electronic2 fan regulator with separately

mounted and accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on/ in

wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

45 a) with medium class Rigid PVC pipe and accessories Pt

erected flushed on wall/ceiling complete

3 Point wiring for secondary light point with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires, in below type of pipe to be

erected complete with earth 2 continuity

and necessary connection with primary light with accessories erected

on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with

necessary Lamp holder / ceiling rose / H.D.Connector as directed

.Note:- Maximum up to 6 mtrs length, excess will be considered as

Mains for Secondary Point.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

4 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with following

type of accessories.

4.1 [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from 471 Pt

50 nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

4.2 [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire 704 Pt

30 from mcb db board.

5 (a) with medium class Rigid PVC pipe and accessories erected 255 Pt

flushed on wall/ceiling complete Point wiring for on board Looped Plug

with 6A Modular type switch & 5 pin socket erected on PVC /

126 Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall /

ceiling with following type accessories

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution

6 & Clamps with following dia of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required

nos. of coupling, PVC bushes, Check-nuts etc. complete of following

8 Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected

as directed of following size.

8.1 200 (B) 2 core 4 sq.mm 130 Mtr.

8.2 360 (C) 2 core 6 Sq. mm 202 Mtr.

8.3 260 (F) 3 core 4 Sq. mm 187 Mtr.

8.4 320 (G) 3 core 6 Sq. mm 290 Mtr.

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated strand ed wire of

green colour for earth continuity of following size (A) with

medium class Rigid PVC pipe and accessories

9.1 950 (a) 2 wire 1.5 sq. mm 62 Mtr

9.2 850 (b) 2 wire 2.5 sq. mm 82 Mtr

9.3 105 (f) 4 wire 2.5 sq. mm 125 Mtr

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

10 conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (A) with medium class Rigid PVC

pipe and accessories

900 (a) 2 wire 4 sq. mm 111 Mtr

11 providing and erecting Miniature circuit breaker single pole 6A to 111 E.a.

25A suitable to operate on 240 V A.C. system and having breaking

30 capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

12 Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity & confirms

to IS : 8828 in existing box having following capacity

13 Sheets steel powder coated enclosure suitable for incorporating 175 E.a.

20 One/Two nos. MCB.

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43)

providing and erecting Approved make ELCBs / RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase

15 240 V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component. for

following Max. rating erected as directed

20 (ii) 40Amps. DP 2213 E.a.

Follow IS code :3043 is the guideline for the earthing

Providing and erecting required size HOT deep Galvanised iron strip

for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors

etc. using proper

16 315 clamp. 77 KG

17 150 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 787 KG

18 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 77 KG

19 Supplying & erecting earth pit of minimum bore dia.150mm size 5703 E.a.

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and

heavy duty cover.(approved make OEM has to submit test certificate)

15 & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 W/ meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report must be

submitted. (b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg.

Light Fixtures & Fans

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to

20 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

20.1 (A) Tube Light with integral driver (iii) 18-20 Watts, Surge - 2KV,IP-20, 293 E.a.

30 conventional 4 feet

20.2 (A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

20.2. (i) 5-9 watts,Surge-2 KV 218 No

20.2. (ii) 11-15 watts, Surge-2 KV 423 No

20.2. 25 (I) Mirror Light 9 Watts, wall mounted minimum 1 feet long 309 No

21 Providing & erecting Approved make Ceiling Fan with double ball

bearing with Condenser 230 volt A.C.50 Hz. 900 mm sweep

10 complete having 3 Aluminium blades, canopy erected complete. [

Make shall be approved by Engineer in Charge]

22 Providing & erecting Approved make Power Saving 50 Watt Ceiling 1929 No

Fan with double ball bearing ISI mark with Condenser 230 volt

A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium

blades with , canopy & 30 cm. down rod erected with earthing.(Make

shall be approved by Engineer in charge))

23 Supplying & erecting approved make low noise decorative exhaust fan 1687 No

having size 200mm with 1350 RPM with square frame ABS body with

inbuilt lowers & square frame. Supplying & erecting fan hook box of

mm M.S. round bar bounded to the RCC bars up to 50mm length each

30 side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary finishing.

25 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or 18 No

26 Supplying and erecting 19 / 20 mm. nominal bore Medium Class 107 Mtr

M.S. Pipe down rod erected duly painted for fan complete with

10 proper insulation without leakage and earthing.

EXTERNAL LIGHTING

Supply , Installation, testing and commissioning of pre- wired, LED

fitting /post top luminaries etc of all typesof external lights, complete

with all accessories and tube etc. directly on pole / pole bracket

including connection with 1.5 / 2.5 sq. mm FRLS PVC insulated,3 core

flexible, copper conductor, with flexible conduits and coupler and

earthing etc. as required.

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled on

single MCPCB, efficiency more than130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses with company mark/name engraved or embossed

to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.CREE / OSRAM / PHILIPS Lumileds /

27 NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. (

fittings required LM-79 & LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

shown.)(B) Flood Light (IP-65), Surge -4KV,Light must have 440VAC

line supply protection. It should withstand 48 hours for 440VAC line

20 (iv) above 90 to 120 watts 6501 No

28 Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground / road surface for enclosingc

525 (A)50 mm outer dia 62 Mtr

29 Supplying & erecting approved make Automatic liquid level 2332 Job

controller 6A. with sensor testing as per instruction of Engineer in

4 charge on site complete with wiring connection with existing wires ,

with copper conductor from pump to upper and lower tank.

30 Supplying and erecting Flexible PVC insulated multistrand multicore

1.1 kv grade ISI marked copper wires of following size to be erected

840 e) 1.50 Sq.mm 3 core round PVC sheathed 45 Mtr

31 Providing & erecting water cooler having storage capacity 150 Ltr. & 55340 No

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed compressor, fan

5 motor, condensing unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless

32 Supplying & erecting 5 stage single reverse osmosis water purification 15466 No

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post carbon filter auto

4 low & high pressure switches with following size of storage tank &

LPH capacity & erected as directed with one year comprehensive

maintenance guarantee.

[B] 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank

33 Providing & erecting open well horizontal mono block pump set 9518 No

with cast iron body, complete for three phase submersible motor

having (B) 1 H.P. single phase open well motor pump set suitable

9518.00 185 LPM discharge @ 25 mtr. head, suitable for 32 mm

Delivery pipe with control panel.

TOTAL Electrical Amount without GST in Rs.

8 FIRE EXTINGUISHER

8.1 3 Supplying & erecting D.C.P. type fire extinguisher for following 2000 No

capacity cartridge type with gun metal cap 150 gram CO2 gas

cartridge, powder and brackets confirming to IS 2171 1985 and

complete erected with necessary clamps made from 50 x 6 mm M S

Flat with nuts and bolts grouted in wall complete. [A] For 5 Kg

8.2 8 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of 7700 No

following capacity with necessary clamps made from 50 x 6 mm M.S.

Flat with nut & bolts grouted in wall complete. [A] For 4.5 Kg Capacity

8.3 8 Supplying & erecting ABC powder type 'Ceasefire' type Fire 990 No

extinguisher as per IS 13849 or 1 Kg capacity with necessary clamp

for erection on wall

SUB TOTAL of FIRE EXTINGUISHER

Contractor’s Quoted Rate: -

Net Quoted Tender Amount Rs.

Signature of contractor Additional City Engineer (SOUTH WEST ZONE)

Seal Ahmedabad Municipal Corporation