Pavement & Bump Marking with Hot Applied Thermoplastic Paints, Bump ahead Sign Boards and Various Road Safety Furniture Items in East Zone of the city of Ahmedabad

Name of Work : Pavement Marking with Hot Applied Thermoplastic Paints, Signboard and various Road Safety

Furniture items in East Zone roads & Bumps of the city of Ahmedabad.

Qty Item Rate Rs. Per Amount Rs.

Road marking with hot applied thermoplastic paints strictly of

Automark - "Specsmark", Asian Paints-"Apcomark", Katalline-

"Traffix O" or Berger Paints-"Sigmark" with reflectorising glass

beads of Automark-"Autolux Gold", "Swarco", "Sovitec" Asian

Paints-Apcobids", "Potters" on bitumen surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area,

thickness of 2.5mm is excluding of surface applied glass beds as

1 4420 per IRC:35-2015. The finished surface to be level, uniform and 559.00 Smt

free from streaks and holes. zebra patta /bump patta lane/center

line/ edge line/cut patta. The white color marking should provide

liminance coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during

the service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and

skid resistance as mentioned in the section-15 of IRC 35-2015. (As

per approved R.A)

Providing and laying Road marking with hot applied thermoplastic

paints strictly of Automark - "Specsmark", Asian Paints-

"Apcomark", Katalline- "Traffix O" or Berger Paints-"Sigmark"

with reflectorising glass beads of Automark-"Autolux Gold",

"Swarco", "Sovitec" Asian Paints-Apcobids", "Potters" on bitumin

surface providing and laying a hot applied thermoplastic compound

2.5 mm thick including reflectorising glass beads @ 250gms per

sqm area, thickness of 2.5mm is exclusive of surface applied glass

beds as per IRC:35. The finished surface to be level, uniform and

free from streaks and holes.) Directional Arrow, Lettering (1

word - up to 4 letters), or any kind of Artwork etc. (which shall

maximum size upto 2.75 Sqmt out to out) Item shall include

providing Stencils for lettering, direction arrow signages, and as

per requirement. including cleaning, required maintenance, etc.

complete pre and post work. Cost shall also include laying with

applicator machine & operating boilers, Skilled Labours for road

marking, and Un-Skilled labours for barricading/protection, traffic

diversion, and it shall also include wastage of material, etc.

Contractor shall be responsible to run his own thermoplastic

applicator machine & supply necessary diesel, gas, fuel, etc, also it

will be his responsibility to Operate preheater. for good quality of

workmanship as instructed by Engg-in-charge. Agency has to

quote rate on Nos. work basis which shall include following

manpower and machinery for each set). (As per approved R.A)

Providing and applying Primer before hot applied thermoplastic

paints marking on RCC road surface, which must ensure better

adhesion of thermoplastic paint to the surface and also increase

paint durability, including all material, manpower, tools and

machineary required for work, with all required safety standards to

work in running traffic conditions, as per standards and as

instructed by engg in charge Agency has to quote rate on Sq.Mt.

work basis).(As per approved R.A)

Providing & applying C.R. Base Road Marking Painting lines,

dashes, arrow, letters etc. on Road in two coats on new Work with

ready mixed road marking paint conforming to IS:164 and

AASHTO standard M-248-90 on concrete/ bituminous

4 150 surface,including required additive/ solvent, providing safety 219.00 Smt

cones,barricades, string, chalks or req. colour for line marking,etc.

Cleaning the surface, removing of all dirt , dust & other foreign

matter and clear the site as per engineer incharge.(As per approved

Regulatory / Mandatory Sign: - Providing and fixing sign boards

made out of 2mm aluminum sheet / 4mm ACP (Aluminum

composite Panel); size 60 cm Dia Circle plus 60 cm x 20cm

rectangular additional plate as per design of IRC67-2012. Pre-

treated with phosphating process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint;

reflectorized with Micro Prismatic Grade retro reflective sheeting

of Type-11 as per ASTM D-4956 and latest M.O.S.T.

Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with best quality epoxy

coatings in black and white bends. The details of symbol foreach

board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:1:2 CC block of size 45 x 45 x 60 Cms.

for each leg. Including excavation, curing etc. Complete under the

supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified

copy of 3-year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting.(As per R.A)

Cautionary Warning Sign: - Providing and fixing sign boards

made out of 2mm aluminum sheet / 4mm ACP (Aluminum

composite Panel); size 60 x 60 x 60 cm equilateral triangle plus

cm x 20cm rectangular additional plate as per design of IRC-67-

2012. Pretreated with phosphating process & acid etching; coated

with one coat of epoxy primer and two coats of best quality epoxy

paint; reflectorized with Micro Prismatic Grade retro reflective

sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.

Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with best quality epoxy

coatings in black and white bends. The details of symbol foreach

board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:1:2 CC block of size 45 x 45 x 60 Cm for

each leg. Including excavation, curing etc. Complete under the

supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified

copy of 3-year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor.

(A)Class-C Type-11 Retro Reflective sheeting.(As per R.A)

Facility Informatory Sign: - Providing and fixing sign boards

made out of 2mm aluminum sheet / 4mm ACP (Aluminum

composite Panel); size 60 x 45 cm rectangular plus 60 cm x 20cm

rectangular additional plate as per design of IRC-67-2012. Pre-

treated with phosphating process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint;

reflectorized with Micro Prismatic Grade retro reflective sheeting

of Type-11 as per ASTM D-4956 and latest M.O.S.T.

7 5 Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB 5373.00 Nos.

Circular MS Pipe as required and frame fabricated from suitable

size iron angle of 35 x 35 x 3mm; painted with best quality epoxy

coatings in black and white bends. The details of symbol foreach

board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:1:2 CC block of size 45 x 45 x 60 Cms.

for each leg. Including excavation, curing etc. Complete under the

supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified

copy of 3-year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting (As per R.A)

CAT-EYE :-Supplying of Moulded Twin Shank Raised Pavement

Markers made of polycarbonates and ABS moulded body and

reflective panels with Micro Prismatic Lens(No Glass Bed Lens)

capable of Providing total internal reflection of the light entering

the lens face and shall support a load of 13635 kgs. tested

accordance to ASTM D 4280 Type H and complying to

specification of category A of MORTH Circular NO

RW/NH/33023/10-97-DO lll Dt.11.06.1997. The height, width and

length shall not exceed 20 mm,130 mm and 130mm and with

8 1350 minimum reflective area of 13 sqcm on each side and slope to the 323.00

base shall be 35+/-5 degree.The strength of detachment of

integrated cylindrical shank,(of diameter not less than 19+/-2 mm

and height not less than 30+/-2 mm) from the body is to be a

minimum value of 500 kgf. Fixing will be by drilling holes on the

road for the shank to go inside, without nails and using epoxy resin

based adhesive as per manufacturer's recommandation and The

color of the marker should be as per the IRC 35-2015 and as

directed by Engineer-In-charge.(R&B SOR 2023-24 Item

Flexible Median Marker :- Providing and Fixing of Flexible

Median Marker that are made of tough, high impact resistant,

injection-molded, thermoplastic body with property of flexibility to

provide high durability. The dimension of Flexible Median Marker

should not exceed 18.4 cm in height(including shank height),12.5

Cm in width. ,0.65 cm in thickness and shank depth shall be 3.4 cm

The body structure shall be rounded at all its corners and edges.

The plastic used for molding the Flexible Median Marker should

survive impact load of 5kg continuously for 750 times at room

temperature. The logo of the manufacturer shall be embossed on

either side of the body in the injection molding process. The

Median Marker shall have flame like shaped body with, fluorescent

yellow color retro-reflective sheeting of size not less than 90 Cm

square, with fully reflective micro prismatic cube corners as its

retro-reflective elements as per IRC 67 2012 and ASTM D4956-09

type XI specifications reflectivity values. The retroreflective

sheeting shall be one or both sides of the Flexible Median Marker

and shall be edge protected with no exposed edges which will

prevent edge lifting, vandalism, sheeting damage, etc. The Flexible

Median Marker shall be fixed by a combination of epoxy adhesive

and grouting as recommended by manufacturer and Engineer in

charge.(SOR AHMEDABAD 2023-24 Item code 26164)

Providing and fixing Swiss type bollard made out of 1.5mm CRC

sheet ,height 140cms,bottom dia 23cm,top dia 12cm with direction

plate of 30 cm dia fabricated necessary anchors as directed and also

10 10 provide through out lengh pipe of 25 NB for the strenthing of 3750.00 Nos.

bollard and reflectorised Micro Prismatic Grade Sheet (Type

XI)and three yellow strip 6 Inches wide of Type XI Retro reflective

Sheeting, fixing with P.C.C M25 grade concrete(Foundation size

30cm×30cm×35cm).(As per AMC Traffic Department SOR)

Poly Urethane:Flexible Bollard - Providing and fixing Poly

Urethane:Flexible Bollard made out of TPU (Thermoplastic

Urethane Poly Ethelene) and UV stabilized material, shall have

high flexiblity and no fedding colours, shall have fixed 3 bends of

100mm width type-I retro-reflective sheeting tape of white colour

which sheeting shall be fixed on posts using special adhesive,

which shall not easy to tear, the cylinderical shape pillar shall have

diameter 160mm, height 1370mm, with square base of

250x250mm, it shall have weight over 5.0kgs, Upper circular head

shall be made of PE (Poly Ethelene) / PPCP (Polypropylene

copolymer) material with 410mm dia, print area of circular head

part shall be 390mm, both the parts shall be fixed with each other

by rivetting and special glue material, with peripherial boarder of

black colour made of same kind of material, which shall have

printed one side direction indication sign and another side AMC

Logo on micro prismatic type-XI retro-reflective sheeting. The

flexible bollards shall be fixed by nail of 12mm dia x 200mm

length, by drilling in existing concrete / or any hard surface by

drilling and fixing by epoxy resin and hardner of make brand 3M

or same kind of approved brand material. Rate shall include cost of

bollard with specified material, all kind of required fixing materials

and fixed at site including all fixing charges, surface preparation of

any site condition as per work requirements, with all lead and lift,

and transportation of any distance. The work shall be executed in

direction of the engineer in charge. (As per approved RA of Traffic

Estimated Tender Amount

Seal and Signature of the Bidder Additional City Engineer

Date: Ahmedabad Municipal Corporation

TENDER ABSTRACT

Name of Work :- “Pavement & Bump Marking with Hot Applied Thermoplastic Paints, Bump

ahead Sign Boards and Various Road Safety Furniture Items in East Zone of the city of

TENDER NO DESCRIPTION AMOUNT RS.

1 “Pavement & Bump Marking with Hot Rs. 41,53,970.00/-

Applied Thermoplastic Paints, Bump

ahead Sign Boards and Various Road

Safety Furniture Items in East Zone of

the city of Ahmedabad”

Estimated Tender Amount Rs. Rs.

Contractor’s Quoted Rate: -

Net Tender Amount Rs.

Seal and Signature of the Bidder Additional City Engineer

Date: Ahmedabad Municipal Corporation