REPAIR AND MAINT OF SUBMERSIBLE PUMP SETS, CENTRIFUGAL PUMP SETS, PANELS, SUPPLY OF CHEMICALS AND IMPROVEMENT OF RAISING MAIN SYSTEM AT N AREA AND HALLOMAJRA UNDER GE CHANDIGARH.

Amount

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed

Returning filling in soil including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick each layer etc. complete and all as specified.

Removing excavated material / Soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point etc complete and all as specified

Taking out carefully submersible pump set upto 52 HP from tube well (for repair of pump/ motor/replacement of column pipe/submersble cable etc) complete with submersible motor, column pipes of any nos and size, submersible cable ,any size and length from tube well at approx depth 120 mtr , without damaging pump motor , submersible cable and column pipe. Stacking of column pipe and submersible cable properly . Transportin of pmp set to workshop for repair and lowering of serviceable pump set with column pipes and cable upto required depth . Connecting electrically and with delivery line etc Note :-1. Cost of T&P (Small or special) required for taking out pump set is deemed to be included in the quoted rates. Any damage to pump set, submersible cable of tube well housing shall be make good by th contrctor without any extra cost. 2. Unsv submersible pump set shall be taken out from the borewell on the same day of receipt of complaint from department and serviceable pump set held with department shall be lowered on the same day to ensure the minimum breakdown period for water supply. Contractor not attending the breakdown after receipt of complaint on telephone shall be charged Rs 10000/- from his RAR clearely mentioning date and location of breakdown not attended by contractor. Break down shall be got rectified/attended directly from the market by the department at the risk and cost of the contractor. Note : Defective spare parts excepts winding wire & bronze bushes etc shall be measured & paid separately under respective itemof this Sch ‘A’ as “Supply only” . But fixing charges shall be deemed to be included in the unit rate of this item. Nothing extra shall be entertained on this account.

Strip opening of unserviceable submersible motor of cap 52 HP,3 phase ,440 volts, 50 Hz, 2900 RPM and rewinding to stator with PVC insulated copper winding wire including sleeves, thimbles& minor spare parts like as bronze bushes , gland packing etc and re-assembling to the same motor after repair work . complete all as specified and as directed

All as per item No 5 here in before but rewinding of submersible motor of cap 41 HP

All as per item No 5 here in before but rewinding of submersible motor of cap 20 to 25 HP

All as per above item No 5 here-in-before but for sewage submersible motor of 12.5 HP To 15 HP

Supply only thrust bearing housing along-with thrust bearing plate for submersible Pump 52 HP complete all as specified and as directed

All as per above item No 9 here-in-before but for 41 HP

All as per above item No 9 here-in-before but for 25HP.

All as per above item No 9 here-in-before but for sewage 12.5HP to 15 HP.

Supply only for motor bearing bush ( Set of five) for submersible Pump 52 HP complete all as specified and as directed by Engineer-in-Charge.

All as per above item No 13 here-in-before but for 41 HP

All as per above item No 13 here-in-before but for 25HP.

All as per above item No 13 here-in-before but for sewage 12.5HP to 15 HP.

Supply only for water seal & adopter (Set of two) suitable for submersible Motor 20 to 52 HP complete all as specified and as directed by Engineer-in-Charge.

All as per above item No 17 here-in-before but for sewage 12.5HP to 15 HP.

Supply only for stainless steel shaft suitable for submersible Pump 52 HP complete all as specified and as directed by Engineer-in-Charge.

All as per above item No 19 here-in-before but for 41 HP

All as per above item No 19 here-in-before but for 25HP.

All as per above item No 19 here-in-before but for sewage 12.5HP to 15 HP.

Supply only for Neck ring of impeller of gun metal for submersible Pump 20 to 52 HP complete all as specified and as directed by Engineer-in-Charge.

Supply only for Bowl casing for submersible Pump 52 HP complete all as specified and as directed

All as per above item No 24 here-in-before but for 41 HP

All as per above item No24 here-in-before but for 25 HP.

Supply only for Shaft sleeve of stainless steel for submersible Pump 52 HP complete all as specified and as directed by Engineer-in-Charge.

All as per above item No 27 here-in-before but for 41 HP

All as per above item No 27here-in-before but for 25HP.

Supply only for Gun metal Impeller Model V-9 for submersible Pump 52 HP complete all as specified and as directed by Engineer-in-Charge.

All as per above item No 30 here-in-before but for 41 HP

All as per above item No 30 here-in-before but for 25HP.

Supply only for Bearing bush for pump for submersible Pump 52 HP complete all as specified and as directed by Engineer-in-Charge.

All as per above item No 30 here-in-before but for 41 HP

All as per above item No 30 here-in-before but for 25HP.

Disconnecting of centrifugal pump set electrically and from suction and delivery line. Transporting pump set to workshop for repair. Strip opening of induction motor 40 HP and taking out burnt out motor winding wire from stator and rotor carefully, cleaning the stator slots carefully, rewinding to stator and rotor with copper winding wire as per exiting size of wire including providing mica paper in stator slots thimbles, vanishing to winding wire and drying up of the insulation in heating chamber , assembling to motor after repair work and megger testing for insulation . Transporting of the motor to site , refixng /reinstallation , reconnecting and testing for smoth and trouble free running/functioning complete to the satisfaction of ENGINEER-IN-CHARGE Note : Defective spare parts excepts winding wire & bronze bushes etc shall be measured & paid separately under respective itemof this Sch ‘A’ as “Supply only” . But fixing charges shall be deemed to be included in the unit rate of this item. Nothing extra shall be entertained on this account.

Supply only ball bearing as per existing size Make :-- SSK/NBC/SKF

Supply only gun metal impeller as per existing size

Machining work for turning of steel shaft & made as per required size

Suppy ony rubber gasket for column pipe (80/100/125 bore) complete all as specified and as directed by Engineer-in-Charge.

Supply only Nuts , bolts and washer for column pipe all as required at site or as per sample

S&F MS coupling suitable for 40 HP centrifugal electric driven pump set with rubber pads as per existing make and model complete all as specified and as directed

S & F 65 mm bore mild steel water pipe heavy duty both end flanged as column pipe (each length of pipe 3metre long) as in repair complete all as specified and as directed by Engineer-in-Charge. Make :-JINDAL/PARKASH /SURYA/SWASTIK Note for above items: Cost of labour for lowering is deemed to be included in item ser No 1above

S & F 80 mm bore mild steel water pipe heavy duty both end flanged as column pipe (each length of pipe 3metre long) as in repair complete all as specified and as directed by Engineer-in-Charge. Make :-JINDAL/PARKASH /SURYA/SWASTIK

S & F 100 mm bore mild steel water pipe heavy duty both end flanged as column pipe (each length of pipe 3metre long) as in repair complete all as specified and as directed by Engineer-in-Charge. Make :-JINDAL/PARKASH /SURYA/SWASTIK

Supply and fix for as in repair PVC insulated ,unsheathed copper conductor cable 16 Sq mm ,3 core , flat in shape suitable for submersible pump motor complete all as specified and as directed by Engineer-in-Charge. Make : KALINGA / FINOLEX / PALAZA / HAVELLS

Supply and fix for as in repair PVC insulated ,unsheathed copper conductor cable 25 Sq mm ,3 core , flat in shape suitable for submersible pump motor complete all as specified and as directed by Engineer-in-Charge. Make : KALINGA / FINOLEX / PALAZA / HAVELLS

Supply and testing Submersible pump set heavy duty for pumping thick mud water , single phase 240 volts 50 HZ of cap 1 HP MAKE:Kirloskar /KSB/Jyoti/crompton

Cleaning of overhead water storage tank of capacity 1,00,000 gallon by scraping internal and external surface of tank with brush and removing all scale / dirt / deposited silt including washed to internal surface of tank with solution of bleaching powder and applying one coat of cement base paint to internal and external surfaces of wall, top and bottom of tank , pillars / beams/ pipes etc after preperation of surface of OHT and providing one coat of synthetic enamelled paint with colour code on inlet / outlet/ washout/over flow pipes surfaces as per existing with writting the cleaning date with white colour on black base all as specified and as directed Note : - Removing/Cleaning of Honey Bee hives shall be the responsibility of the contractor. No delay, No additional charges shall be considered on this account rates quoted against the item shall include the said element. b) Contractor is responsible for making all safety arrangments, scaffolding/jhulla for carrying out the above job with due care at a height of approx 22 Mtr c) Contractor may visit the site before quoting the tender. (d) Insurance of labour for cleaning of over head tank shall be submitted to the dept before commencement of work and the cost of insurance shall be born by the contractor. Nothing extra shall be admissible on this account.

All as per above item No 49 here-in-before but over head water storage tank of 50,000 gallons capacity.

All as per above item No 49 here-in-before but cleaning of semi under ground water storage tank of 75,000 gallons. Note for item No 49 to 51 :- (i) The cost of required T&P, machine, motor, scaffolding shuttering shall be arranged by the contractor at own cost.

Supply and filling of calcium based granular (Calcium hypochlorit granular), disinfectant for Chlorination of water having more stable than chlorine gas and contains no mercury, no heavy metal contamination , supported with test certificate , all as specified and including daily testing of water from different -different locations in presence of MES / Medical authority from SHO/MI Room and maintaining record of test result in a register and otaining signature of Medical Authority for 'N' Area, and Hallomajra complete all as specified. Brand Name Puri chlor. M/s BM Aqua Tech Pvt Ltd (Mark “ Baxer” brand)/ (Rayalseema/ M/s Grasim Industries Ltd Chemical Division / any product approved by E-in-C’s Branch

Supply & Fix as in repair incl testing and Commissioning of chemical dozing pump high pressure single head, adjustable dozing pump and high pressure range 0 to 100 PSI , Power 230 volts, 50 Hz, 40 Gallons per day self priming with vertical or Horizontal mounting type Make DECLIBAC model No 96NGQ51 or equavlent in Aquafit /RAMCO

Supply & Fix as in repair CHEMICAL DOSING SYSTEM consisting of two Nos FRP Tanks i e 1x170 Litre capacity and 1x 100 Ltr capacity with FRP lid and level gauge alongwith water inlet /outlet line with Y strainer, drain plug, over flow pipe, having conical bottom for sludge deposition, port hole with cover Plastic - mounted on tank. Lid will have port hole for pouring Granular chemical and water and shall have provn of mounting DOSING PUMP on the Lid / Wall Make DECLIBAC/AQUAFIT/RAMCO

Supply & Fix as in repair agitator motor 120 Watt,copper wound, 900 RPM, Single phase 230 Volt with Shaft and impeller and all accessories suitable for mounting on FRP Tank lid or wall all as directed by Engr incharge Make DECLIBAC /Aquafit/RAMCO

Supply & replacement of pump tube for chemical dozing system as per existing make and dimension and as directed complete all as specified and as directed

All as per item No. 56 above but injection check valve 3/8" .

All as per item No 56 above but discharge tubing 3/8" .

All as per item No. 56 above but Rotar Assy with bearings brackets and tolerances ring .

All as per item No. 56 above but suction line strainer 3/8" .

All as per item No. 56 above Roller Assy .

All as per item No. 56 above but Gear motor complete 230 volt, 50 Hz .

All as per item No. 56 above but Coil 250 volt 50 Hz

S&F FASDS suitable for 52 HP Submersible electric driven pump set ,3 Phase , AC 415 volt ,50 HZ( for min current carrying cap 90 Amps) with MS enclosure with Std protection ie single phase, over volt /under volt etc complete Make : BCH/Seimens/scheneider

S&F FASDS suitable for 41 HP Non clog Submersible electric driven pump set ,3 Phase , AC 415 volt ,50 HZ (for min current carrying cap 70 amps) with MS enclouser with Std proction ie single phase, over volt /under volt etc complete Make : BCH/Seimens/scheneider

S&F FASDS suitable for 25 HP Non clog Submersible electric driven pump set ,3 Phase , AC 415 volt ,50 HZ (for min current carrying cap 62 amps) with MS enclouser with Std protection ie single phase, over volt /under volt etc complete Make : BCH/Seimens/scheneider

Supply fixing FASDS(fully automatic star delta starter) enclosed in sheet steel enclousure Factory made suit able for sewage non clog pump set but not less then 15 HP , 3 phase 415 volts, 50 Hz incl provn of single phasing with CTs , Voltmeter&Ammeter with slector switch,LED Indicator,On & Trip indicator, with TP MCB 'C' curve 3 phase Short circuit protection , fixing arrangement on wall etc complete all as specified . Make : C&S Cat part No : BE3-SPSDDX254Q353 or equaliant in ABB/ BCH/seimens

M&L for development of bore well by air compressor of capacity 475 cft /per minutes and 150-200 PSI g appropriate capacity as required on ground till to get the clear water as well as to achive approprate yield of bore complete all as specified ad as directed by engineer -in - charge

S&F Packing pea gravels of size 5mm to 10 mm of approved quality duly washed in packing around casing pipe and slotted pipe in bores located at 'N' area and HMJ complete all as specified and as directed by Engineer -in-charge .

M&L DI pipe 200 mm (certifugally cast) class 'K-9' (ISI Mark) in any length with spigot and socket ends complete including rubber ring joint (Tyton joint) as per IS- 1536-2001 jointed and laid in trenches or in any position, complete including taking down any type and size of pipe all as specified . Note :- Cost of rubber ring (tyton) joint is deemed to be included in the quoted rates Make: Electro Steel/Lanco/Kesoram/Tata

M&L DI pipe 150 mm (certifugally cast) class 'K-9' (ISI Mark) in any length with spigot and socket ends complete including rubber ring joint (Tyton joint) as per I.S- 1536-2001 jointed and laid in trenches or in any position, complete including taking down any type and size of pipe all as specified . Note :- Cost of rubber ring (tyton) joint is deemed to be included in the quoted rates Make: Electro Steel/Lanco/Kesoram/Tata

M&L DI pipe 100 mm (certifugally cast) class 'K-9' (ISI Mark) in any length with spigot and socket ends complete including rubber ring joint (Tyton joint)as per IS- 1536-2001 jointed and laid in trenches or in any position, complete including taking down any type and size of pipe all as specified . Note :- Cost of rubber ring (tyton) joint is deemed to be included in the quoted rates . Make: Electro Steel/Lanco/Kesoram/Tata

M&L DI pipe 80 mm (certifugally cast) class 'K-9' (ISI Mark) in any length with spigot and socket ends complete including rubber ring joint (Tyton joint)as per IS-1536-2001 jointed and laid in trenches or in any position, complete including taking down any type and size of pipe all as specified . Note :- Cost of rubber ring (tyton) joint is deemed to be included in the quoted rates . Make: Electro Steel/Lanco/Kesoram/Tata

Supply and fixing of CI/DI fittings of size up 150 mm bends ( any radius and angle ) Tapers any type,( straight, bend , increasing,decreasing or double socket etc)Tee pieces single branch. `Y` junction , double branch cross ( all socket or socket and spigot/ flanged as required at site) collars, caps and plugs etc.,complete all as specified Make: Electro Steel/Lanco/Kesoram/ TATA

Rubber gasket joint for 100 mm dia pipe complete all as specified

Rubber gasket joint for 150 mm dia pipe complete all as specified

Rubber gasket joint for 200 mm dia pipe complete all as specified

S & F Sluice valve PN-1.6 (ISI marked) confirming to IS-14846-2000 with brass spindle and fly net flanged both ends and drilled for jointing, wheel head type including nuts, bolts, washes & 02 Nos rubber insertion packing etc for 200 mm bore pipe and fixed, in epairs, complete all as specified. Make: SANT, BIR, LEADER, ZOLOTO, KIRLOSKAR, KARTAR.

S & F Sluice valve PN-1.6 (ISI marked) confirming to IS-14846-2000 with brass spindle and fly net flanged both ends and drilled for jointing, wheel head type including nuts, bolts, washes & 02 Nos rubber insertion packing etc for 150 mm bore pipe and fixed, IN REPAIRS, complete all as specified. Make: SANT, BIR, LEADER, ZOLOTO, KIRLOSKAR, KARTAR.

S & F Sluice valve PN-1.6 (ISI marked) confirming to IS-14846-2000 with brass spindle and fly net flanged both ends and drilled for jointing, wheel head type including nuts, bolts, washes & 02 Nos rubber insertion packing etc for 100 mm bore pipeand fixed, IN REPAIRS, complete all as specified. make: SANT, BIR, LEADER,ZOLOTO, KIRLOSKAR, KARTAR.

S & F Sluice valve PN-1.6 (ISI marked) confirming to IS-14846-2000 with brass spindle and fly net flanged both ends and drilled for jointing, wheel head type including nuts, bolts, washes & 02 Nos rubber insertion packing etc for 80 mm bore pipe and fixed, IN REPAIRS, complete all as specified. Make: SANT, BIR, LEADER, ZOLOTO, KIRLOSKAR, KARTAR.

Gun-metal, globe or gate valves, ISI marked (IS:778) with iron wheel head, screwed both ends for iron pipe and fixed of size 50mm dia, in repairs , complete all as specified. MAKE: SANT,BIR, ZOLOTA

Gun-metal, globe or gate valves, ISI marked (IS:778) with iron wheel head, screwed both ends for iron pipe and fixed of size 40mm dia, in repairs , complete all as specified.MAKE: SANT,BIR, ZOLOTA

Gun-metal, globe or gate valves, ISI marked (IS:778) with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm dia, in repairs , complete all as specified. MAKE: SANT,BIR, ZOLOTA

Supply and fix in repair Gun-metal, globe or gate valves, ISI marked (IS:778) with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia, in repairs , complete all as specified. MAKE: SANT,BIR, ZOLOTA

Cast iron Non return valve of 150 mm dia with provn of two end spoigot and socket suitable for rubber tyton joint and one end flanged fixed with removable MS plate incl ,rubber gas kit,nut,bolt ,washers,and making suitable fixing arrangement to spoigot and sockete DI 200 MM dia pipe etc complete all as specified . Make: SANT, BIR, LEADER, ZOLOTO, KIRLOSKAR, KARTAR. Note : Fitting will be measured and paid separetly, if any, required.

S&F 100 mm bore cast iron Air release valve with two air outlets complete with fixing arrangement, as in repair complete all as specified and as directed by Engineer-in-Charge. Make : KIRLOSKAR / SANT / BIR

Arresting of water leakage from existing pipe line in position from DI/CI/GI pipe of size 150 mm to 300 bore ,including excavation through Men/Mechanical power ,cutting,welding as per site requirement,jointing material such as lead joint/gaskit joint/CI fitting, nut and bolts,washers and refilling etc complete all as specified . Note:- (i) Excavation up to 1x1x6 Mtr will be deemed to be included in quoted rate. (ii) , DI / CI fitting and pipe length) will be measured and paid saperately under appropriate item of sch 'A' herein. (iii) Cost of new pig lead/lead wool required for repair of leakages is deemed to be included in the quoted rates.

Arresting of water leakage from existing pipe line in position from DI/CI/GI pipe of size 80 mm to 100mm bore ,including excavation through Men/Mechnical power ,cutting,welding as per site requirement,jointing material such as lead joint/gaskit joint/CI fitting, nut and bolts,washers and refilling etc complete all as specified . Note:- (i) Excavation up to 1x1x6 Mtr will be deemed to be included in quoted rate. (ii) , DI / CI fitting and pipe length) will be measured and paid saperately under appropriate item of sch 'A' herein. (iii) Cost of new pig lead/lead wool required for repair of leakages is deemed to be included in the quoted rates.

Arresting of water leakage from existing pipe line in position from DI/CI/GI pipe of size 80mm to 100 bore ,including excavation through Men/Mechnical power ,cutting,welding as per site requirement,jointing material such as lead joint/gaskit joint/CI fitting, nut and bolts,washers and refilling etc complete all as specified . Note:- (i) Excavation up to 1x1x6 Mtr will be deemed to be included in quoted rate. (ii) Jointing material and pipe length will be measured and paid saperately under approriate item of sch 'A' herein.

Arresting of water leakage from existing pipe line in position from GI pipe of size 40mm to 50mm bore ,including excavation through Men/Mechnical power ,cutting threading,welding as per site requirement, incl jointing material such as GI (Bend,socket,reducer,tee,funel, union ,solution,thread etc) and refilling etc complete all as specified . Note:- (i) Excavation up to 1x1x6 Mtr will be deem to incl in quoted rate. More excavation will be measured and paid saperately. (ii) Pipe length will be measured and paid saperately.

Arresting of water leakage from existing pipe line in position from GI pipe of size 15mm to 25mm bore ,including excavation through Men/Mechnical power ,cutting threading,welding as per site requirement, incl jointing material such as GI (Bend,socket,reducer,tee,funel, union ,solution,thread etc) and refilling etc complete all as specified. Note:- (i) Excavation up to 1x1x6 Mtr will be deem to incl in quoted rate. More excavation will be measured and paid saperately. (ii) Pipe length will be measured and paid saperately.

Locating blockage in existing distribution pipeline 80mm dia any type in position by excavation work manualy in any type of soil upto 750x500mm upto max 2Mtr length at various location ( Maximum up to 3 location ) incuding necessary cutting/threading/welding work & provision of required size of fittings such as union/socket 1no ,replacement of damaged pipeline,returning filling and removal of surplus soil complete all as specified . Note :- (i) Pipe length will be measured and paid saperately under approriate item of sch 'A' (ii) Contractor shall restore supply system within in 8Hrs.

Locating blockage in existing distribution pipeline 40/50mm dia any type in position by excavation work manualy in any type of soil upto 750x500mm upto max 2Mtr length at various location ( Maximum up to 3 location )incuding necessary cutting/threading/welding work & provision of required size of fittings such as union/socket 1no ,replacement of damaged pipeline,returning filling and removal of surplus soil complete all as specified . Note :- (i) Pipe length will be measured and paid saperately under approriate item of sch 'A' (ii)Contractor shall restore supply system within in 8Hrs.

Supply and installation in repair submersible pump set eletric driven 415 volts three phase specially designed for 200 mm dia bore well and 80 mm delivery with brass impellers having disscharge not less than 15 LPS at 145 mtr head complete with suitable type and capacity submerible 3 phase eletric motor : Make : Kirloskar/CRI/BEACON/ Note : Cost of taking old unsv pump set from bore well along with column pipes and submersible cable carefully and lowering of new pump with coloumn pipe and submersible cable is deemed to be included in the quoted rates

S&F Run lead joint for 150 mm pipe

S&F Run lead joint for 200 mm pipe

S&F Run lead joint for 100 mm pipe

S&F Run lead joint for 80 mm pipe

Supply and fixing Motor protection unit(MPU) three phae 415 volt , 50 HZ having following protectiion (a) Automatic phase sequence corrector (b) Automatically correct inut reverse phase, (c) single phase protection (d) , LV, HV, LIV, Auto on off, timer,(e) Dry running (f) under & over current, unbalancing ,float switch with built in CTs (Automatic-RTM ) complete all as specified. & direcected Model MiCOM P22x of Schneideror equivalent in Seimens/L&T

Supply, Installation, Testing and Commissioning of 150 mm dia, single phase, Motor Actuated Butterfly valve with following specification : a)Designed Line Pressure : 10 kg/sqcm b)Operating Angle : 90 degrees c)Disc Material : CI with nylon coating d)Limit Switches : 02 nos. for Open & Close e)Mounting : Splash Proof - Direct on Valve f) Input Supply : 230V AC, 50 Hz g) Manual Operation : Hand Wheel Make: Ritetork/Emtork /Rotork/Rapid/MAI

Supply, Installation, Testing and Commissioning of 100 mm dia, single phase, Motor Actuated Butterfly valve with following specification : a)Designed Line Pressure : 10 kg/sqcm b)Operating Angle : 90 degrees c)Disc Material : CI with nylon coating d)Limit Switches : 02 nos. for Open & Close e)Mounting : direct type. f) Input Supply : 230V AC, 50 Hz g) Manual Operation : Hand Wheel Make: Ritetork/Emtork /Rotork/Rapid/MAI

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate laid in alternate bays, each bay n. exc 2.5m in length as in plinth protection, finishing cement concrete surface even and fair without using extra cement including fillings of joints with bitumen grade 85/25 complete all as specified and as directed by Engineer-in-Charge.

Taking out old unserviceable pump set incl Supply, installation, lowering, commissioning testing self proming monoblock pump including electric driven motor single phase, 230 volt of capacity 3.8kw/5 HP , head not less than 20 Mtr suitable for 50 mm bore delivery pipe of bore well complete all as specified and as dircted by Engineer In Charge. Make :- Kirloskar /KSB/jyoti/

Construction of valve pit chamber of size 120 x120 x120 cm with brick masonary in cement mortar 1:4, all internal surface to be plastered in cement mortar 1:4 and floor 100mm thick in cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggregate, including 6.00 mm thick MS sheet cover fixed with angle iron frame 40x40x6mm thick with locking arrangement and lifting handle including two coat of anti- corrosive synthetic enamel black paint over a coat of red oxide primer to steel surfaces including necessary earth work and PCC copping in cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate complete all as specified

Construction of valve pit chamber of size 90 x90 x90 cm with brick masonary in cement mortar 1:4, all internal surface to be plastered in cement mortar 1:4 and floor 100mm thick in cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggregate, including 6.00 mm thick MS sheet cover fixed with angle iron frame 40x40x6mm thick with locking arrangement and lifting handle including two coat of anti- corrosive synthetic enamel black paint over a coat of red oxide primer to steel surfaces including necessary earth work and PCC copping in cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate complete all as specified

M&L Cast iron pipes 200 mm dia with spigot and socket ends centrifugally cast. Class LA, in any length, laid in trenches Make: Electro Steel/Lanco/Kesoram/Tata

M&L Cast iron pipes 150 mm dia with spigot and socket ends centrifugally cast. Class LA, in any length, laid in trenches Make: Electro Steel/Lanco/Kesoram/Tata

M&L Cast iron pipes 100 mm dia with spigot and socket ends centrifugally cast. Class LA, in any length, laid in trenches Make: Electro Steel/Lanco/Kesoram/Tata

M&L Cast iron pipes 80 mm dia with spigot and socket ends centrifugally cast.Class LA, in any length, laid in trenches Make: Electro Steel/Lanco/Kesoram/Tata

M&L cast iron pipe 150 mm bore with flanged end certifugally cast class class 'B' in any length to be laid/fixed as rising/delivery main with RCC OH Tanks of height up 21 mtrs complete including rubber gasket, nuts bolts, washers and taking down old unsv CI pipes. all as specified. Make: Electro Steel/Lanco/Kesoram/Tata

M&L cast iron pipe 100 mm bore with flanged end certifugally cast class class 'B' in any length to be laid/fixed as rising/delivery main with RCC OH Tanks of height up 21 mtrs complete including rubber gasket, nuts bolts, washers and taking down old unsv CI pipes. all as specified. Make: Electro Steel/Lanco/Kesoram/Tata

S&F Rotational moulded polye- thylene water storage tanks of cap 1000 Ltrs triple layered (cylindrical vertical with closed top) hoisted and fixed in position complete including 25mm float valve specified in SSR Part I.MAKE:SINTEX/SUPREME or equivalent.

S&F Ball brass valves 25 mm dia , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F in repair SOFT STARTER suitable for 41HP Submersible electric driven pump set ,3 Phase , AC 415 volt ,50 HZ with MS enclouser made ot of 7 SWG CRCA SHEET with incommer 100 Amp TP MCCB 25ka,TIC 70-Fixed Iu=70A with extended terminal ,metering VAF meter DM6100 DIigital hour meter CTs 100/5A Cl-1 05 va ,tape wound RYB indication LED lamps Type 6A control MCB,Almn bus bar 120A Rating 20x 6mm and Std protection copper wiring with colour code incl ferrules, rubber gourmet etc complete As per cat no PSE60 of Make ABB or similar in L&T BCH/SIEMENS/SCHINEIDER

S&F in repair Automatic power factor correction(APFC) panel 3 phase 415 volts,50 Hz system of capacity 20 KVAR without incoming MCCB complete all as specified and as directed. Make ABB or similar in L&T BCH/SIEMENS/SCHINEIDER

Cutting of existing /cast iron pipe of 150 mm bore for insertion of new tees & branch line of any bore in position complete and all as specified

Cutting of existing /cast iron pipe of 100 mm bore for insertion of new tees & branch line of any bore in position complete and all as specified

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sq mm3.5 core.MAKE-Havells/Polycab/CCI

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sq mm3.5 core.MAKE-MAKE-Havells/Polycab/CCI

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sq mm3.5 core.MAKE-MAKE-Havells/Polycab/CCI

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sq mm3.5 core.MAKE-MAKE-Havells/Polycab/CCI

M & L for sand filling using approved clean dry sand for cushioning of under ground cables incl spreading levelling and well ramming in layers not exc 25 cm.

Supply and laying of class B bricks for under ground cable protection as directed by Engineer- in - charge

S & F in repair 40 mm bore Tubes ‘light grade’, galvanized with all fittings, laid in trenches or fixed along poles with mild steel clamps, as protection to cable, complete all as specified . MAKE : JINDAL,TATA,Swastik.

S & F in repair 50mm bore Tubes ‘light grade’, galvanized with all fittings, laid in trenches or fixed along poles with mild steel clamps, as protection to cable, complete all as specified . MAKE : JINDAL,TATA,Swastik.

S & F Pig lead

S & F lead wool

S&F in repair Tubes 20 mm bore, ‘medium grade’, ISI MARKED, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. MAKE : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL..

S&F in repair Tubes 25 mm bore, ‘medium grade’, ISI MARKED, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. MAKE : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL.

S&F in repair Tubes 40 mm bore, ‘medium grade’, ISI MARKED, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified. MAKE : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL.

S&F in repair Tubes 50 mm bore, ‘medium grade’, ISI MARKED, galvanized with all fittings and fixed complete laid in trnches or walls and ceilings or laid in floors, complete all as specified.MAKE : JINDAL, TATA, BST, PRAKASH TUBES, OSWAL.

Cutting and threading existing 15 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured) .complete all as directed by the Engineer- in-Charge.

Cutting and threading existing 20 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured)complete all as directed by the Engineer- in-Charge.

Cutting existing 25 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured).complete all as directed by the Engineer- in-Charge.

Cutting existing 40mm to 50 mm bore, ‘medium grade’, galvanized tubes, for alteration or additions (each cut measured) complete all as directed by the Engineer- in-Charge.

S&F in repir power contractor 3 pole ML-4 conforimg to cat part No SS-90910of L&T with DC coil of AC3 rating 70 to 110 Amps suitable for motor including connection with new copper cable of sitable size and connection with new copper lugs and testing for smoth and trouble free running of starter on load. Make : equivalent in BCH/LEGRAND/SCHINDER/GE/SIEMEN

S&F in repir power contractor 3 pole Type MNX 95 (2NO+2NC) 3 pole of L&T cat part No CS 94136 with DC coil of rating AC-3 160 Amps suitable for motor including connection with new copper cable of sitable size and connection with new copper lugs and testing for smoth and trouble free running of starter on load. Make : equivalent in BCH/LEGRAND/SCHINDER/GE/SIEMEN

S&F in repair Thermal over load relay for motor stater ML-3 with stat and off reset of range 28 to 42 Amps conforming to cat part No Cat part no- SS91859 of L&T of equivalent in BCH/LEGRAND/SCHINDER/GE/SIEMEN

S&F in repair Thermal over load relay for motor stater ML-5 with stat and off reset of range 45to 75 Amps conforming to cat part No Cat part no- SS-94137 of L&T of equivalent in BCH/LEGRAND/SCHINDER/GE/SIEMEN

S&F in repair Time delay switch for FASDS (Motor starter) complete conforming to cat part no 8005-1-ON-60S 230 V single phase 230 volts of L&T or equivalent in BCH/LEGRAND/SCHINDER/GE/SIEMEN/GIC

M & L for Cutting CI/DI pipes and reducing to required length before laying (pipes supplied by M.D. for laying only) of the following sizes. Note :- Each cut will be measured and paid separately under respective item

Taking out existing CI pipe line 200mm dia both end flanged or spigot or socket jointed incl burning of joints of lead wherever applicable complete all as directed by Engr-in-charge.(Note :- Excavation and earth work measured and paid separately).

All as per Item No 145 above but of size 150mm dia

All as per Ser Item No145 above but 100mm dia.

All as per Ser Item No 145 above but 80mm dia.

Taking out existing GI pipe line 50mm dia both end flanged or spigot or socket jointed incl burning of joints of lead wherever applicable complete all as directed by Engr-in-charge.(Note :- Excavation and earth work measured and paid separately).

All as per Item No 149 above but of size 40 mm dia

All as per Item No 149 above but of size 25mm dia

All as per Item No 149 above but of size 20 mm dia

S&F in replacement MCCB 3 pole 415 V adjustable thermal type 250 Amps with breaking capacity 36 KA complete all as specified and directed. make:- Havells/Standard/Indoasian

S&F in replacement MCCB 3 pole 415 V adjustable thermal type 200 Amps TP with breaking capacity 36 KA complete all as specified and directed.make:- Havells/ Standard/ Indoasian

S&F in replacement MCCB 3 pole 415 V adjustable thermal type 160 Amps with breaking capacity 35 KA completed all as specified and directed. Make: Havells/Standard/ Indoasian

unique power & control system

infinity Services