Maintenance and Landscaping of outside Lawn of Field Hostel including its Facelifting on front side by way of Varnishing at GT Pampore

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in- Charge. All kinds of soil

Supplying, filling, spreading and levelling stone boulders of size range 5 cm to 20 cm, in recharge pit in the required thickness for all leads and lifts all complete as per direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Cantering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Facelifting of elevation of building by way of applying Brick sealer/varnish/Surface coat on exposed brick wall. Two or more coats

Applying breathable, non-reactive antifungal and water repellent silane/ Siloxane chemical as approved by Archaeological survey of India/ Engineer-in-charge, of approved brand and manufacturer, diluted with solvent mineral turpentine oil in the ratio of 1:12 ( 1 part of approved Chemical :12 part of turpentine oil), on the existing sand stone masonry surface with two or more codes to given uniforms application of chemical on the surface all complete as per direction of Engineer-incharge ( the rate is inclusive of all materials and labours involved except scaffolding)

C.G.I. SHEETS ROOFING Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gram/m2