(PART-A)- SHAHZADPUR DISTT...

Providing, supplying, erection, testing and commissioning cast iron manually operated sluice gates of size 450mmWx300mmD at receiving chamber complete in all respect as per IS 13349:1992

Providing, supplying, erection, testing and commissioning Manual Coarse Bar screen Channel Width: 900 mm, Channel Depth: 1200mm, Water Depth : 900 mm, Bar Spacing : 20 mm, Bar Thickness: 10x50mm, Angle of Inclination: 60 Degree MOC : SS-304. Complete in all respect

Providing and insertion of 219.10mm O/D, 6.3mm thick MS casing pipe ( Fe- 330 grade ) fabricated as per IS:3589 of 2001 from steel plates confirming to IS:2062 including cutting , beveling, grinding and jointing with radio graphically welding of pipe as per IS:1182 and testing complete in all respect. (Make: Jindal, Electrosteel, TATA) (For 219.10mm O/D, 6.3mm thick M.S pipe as per IS code)

Labour Rates for Horizontal boring for crossing casing pipe of size 323.90 mm o/d by jack pushing/horizontal direction drilling method trenchless technology complete in all respect under Highway. (For 323.90mm o/d dia 7.1mm thick M.S pipe as per IS code)

Labour Rates for Horizontal boring for crossing casing pipe of size 610 mm o/d by jack pushing/horizontal direction drilling method trenchless technology complete in all respect under Highway. (For 610mm O/D,12.5mm thick M.S pipe as per IS code)

Supplying, erection testing and commissioning of submersible pumping sets as per BIS Specification No.8034-1989 (as amended up to date for pumps) and IS. 9283-1979 (as amended up to date for motor) the pump motor sets should be capable of pumping clear fresh cold water having Characteristics as specified in Clause-4 of IS. 8034/1989 and Clause 4.1 of IS 9283/1979. (400 LPM - 200m Head - 30BHP)

Gaseous Chlorination System comprising Vacuum Chlorinators (2 Nos., 1W plus 1S), 0-5 kg/hr Capacity), Water Feed Pumps (2 Nos.: 1W plus 1S), Interconnecting Piping and Appurtenances, Chlorine Gas Detector, Empty Chlorine Tonners (Suitable for 30 days’ Storage) with Trunions, Lifting Device and Suspended Weighing Scale, Residual Chlorine Test Kit, first aid kit, Safety equipment (e.g. Exhaust Fan, Canisters, Gasmasks etc.), Mandatory Spares, Chlorine Leak Detection and Chlorine Leak Absorption System including FRP Half Hoods, Caustic Solution Tank, Caustic Recirculation Pump, Centrifugal Fan, Interconnecting Piping and Ducts and other required ancillary components complete in all respect.

Providing, supplying, erection, testing and commissioning Manual Coarse Bar screen Channel Width: 900 mm, Channel Depth: 1200mm, Water Depth : 600 mm, Bar Spacing : 20 mm, Bar Thickness: 10x50mm, Angle of Inclination: 60 Degree MOC : SS-304. Complete in all respect

Providing, lowering, cutting, jointing and testing RCC pipe class NP3, cast by vibrated method conforming to IS:458:2021, with spigot and socketed joints manufactured with ISI marked sulphate-resistant cement conforming to IS:12330 and concrete design mix minimum M-40 grade. Each pipe shall be lined internally with HDPE lining of uniform 2.5 mm thickness, fusion bonded or mechanically anchored to the concrete wall to provide resistance against corrosion and abrasion. The HDPE material shall conform to ASTM D1248 and IS:7328 standards. The reinforcement shall be of high tensile steel conforming to IS:1786 (Fe550 grade) and placed as per IS:458:2021. The rubber rings shall be ISI marked, anti-termite, as required at site, laid in trenches for all depths and laid to correct alignment, gradients and levels including dressing and trimming and cutting of concrete beds and sides of trenches, if required, jointing with rubber rings in trenches and jointing with 1:3/2 cement sand mortar and with end dowels filled with 1:3/2 cement sand mortar and finishing the joints at an angle of 45 degrees with faces of spigot and socket joints, cutting and finishing the cut surface to a uniform finish etc., as fully described in item No. 21.38, item 21.44, item 21.45, and item 21.46 including cartage, loading and unloading complete in all respects.the internal diametric of the sewer being: 400mm I/d Pipe..

Providing and insertion of 355.6 mm O/D,7.1mm thick MS casing pipe ( Fe- 330 grade ) fabricated as per IS:3589 of 2001 from steel plates confirming to IS:2062 including cutting , beveling, grinding and jointing with radio graphically welding of pipe as per IS:1182 and testing complete in all respect. (Make: Jindal, Electrosteel, TATA)