TO CARRY OUT DIFFERENT CIVIL WORKS / REPAIR &MAINTNANCE WORKS FOR EXISTING CIVIL + PHE (PUBLIC HEALTH ENGINEERING) + FIRE STSTEM + INTERIOR + EXTERNAL DEVEOPLMENT RELATED WORKS IN SVP HIGHRISE HOSPITAL BUILDING AND IN SVP CAMPUS (ARC TENDER FOR 1 YEARS)-AHMEDABAD.

Sr. no Item Description Unit Quantity Unit Rate Amount

PART - I CIVIL & AAC/MASONARY WORKS

Masonary work using Aerated light weight concrete block having crushing strength not less than

35 kg/sqcm for super structure above plinth level upto

floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical

Location : All Floors Internal/ External Walls Cum 15.00 4,483.73

R&B SOR 2024-25, Item Code . 6014 page no.76

Brick work using common burnt clay building bricks having crushing strength not less than

1.2 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular Cum 1.50 4,345.02

, Basment upto plinth level

3rd floor Cum 1.50 4,387.68

4th floor Cum 1.50 4,430.34

5th floor Cum 1.50 4,473.00

6th floor Cum 1.50 4,515.66

7th floor Cum 1.50 4,558.32

8th floor Cum 1.50 4,600.98

9th floor Cum 1.50 4,643.64

10th floor Cum 1.50 4,686.30

11th floor Cum 1.50 4,728.96

12th floor Cum 1.50 4,771.62

13th floor Cum 1.50 4,814.28

14th floor Cum 1.50 4,856.94

15th floor Cum 1.50 4,899.60

16th floor Cum 1.50 4,942.26

17th floor Cum 1.50 4,984.92

Terrace Cum 1.50 5,027.58

R&B SOR 2024-25, Item Code . 06001AA, 06007A1A page no.71,73

Half brick masonry in common brunt clay building bricks having crushing strength not less than

1.3 35 Kg/Sq.Cm. in Cement mortar 1:5 (1- Cement : 5 -coarse sand ) in foundation and plinth from SMT 4.50 575.39

basement-2 to 2nd floor

3rd & 4th floor SMT 4.50 581.24

5th & 6th floor SMT 4.50 587.09

7th floor & 8th floor SMT 4.50 592.94

9th floor & 10th floor SMT 4.50 598.79

11th floor & 12 th floor SMT 4.50 604.64

13th floor & 14 th floor SMT 4.50 610.49

15th floor & 16 th floor SMT 4.50 616.34

17th floor & Terrace SMT 4.50 622.19

R&B SOR 2024-25, Item Code . 06008B1A,06011AA, page no.74,75

Providing and laying in position Ready Mixed M- 200 grade concrete for reinforced cement

conctere work , using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement

1.4 concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the CMT 5.00 4,793.10

cost of centering shuttering finishing and reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be maintained)

R&B SOR 2024-25, Item Code . 5055, page no.67

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and laying in position Ready Mixed M- 250 grade concrete for reinforced cement

conctere work , using cement content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms

having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement

concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the

cost of centering shuttering finishing and reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability as per direction of the Engineer - in -

charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement

level 450 kg ). Slabs, landings, shelves, balconies, lintels, beams, girders and cantilever complete

at all floors/all places/all heights & as per the instruc ons of EIC

R&B SOR 2024-25, Item Code . 5056, page no.67

Providing & fixing Thermo Mechanically treated Bars (TMT bars) reinforcement for RCC

work including bending with 16 or 18 guage GI coated binding wire and placing in position

1.6 complete at all floors/all places/all heights (Fe 500D). (Approved BBS quantity by EIC will be Kgs 500.00 75.46

payable, no extra quantity will be payable) for all floor / all Heights as per the instructions of EIC

R&B SOR 2024-25, Item Code . 05014C, page no.54

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc.height of proping and centring below supporting floor

to ceiling and removal of the same for in situ reinforced concrete and plain concrete

work in sides and soffits of beam,haunchings,cantilever,griders,bracings,lintels at all

level/all places/all heights and all kind of RCC members as per the instructions of EIC (SVP

R&B SOR 2024-25, Item Code . 09001AA, page no.81

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per

1.8 approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and SMT 10.00 680.10

filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

R&B SOR 2024-25, Item Code . 14033, page no.130

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work at all floors/all places/all heights & as per the

instructions of EIC

R&B SOR 2024-25, Item Code . 05011BA, page no.53

TOTAL OF PART-I

PART -II WOOD WORKS AND DOOR WORKS -

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of

5mm, madeouto fextruded5mmrigid PVC foamsheet,

mitredatcornersandjoinedwith2Nosof150mmlongbracketsof15x15mmM.S.squaretube,thevertic

aldoorframeprofilestobereinforcedwith19x19mmM.S.squaretubeof19gauge,EPDMrubbergasket

weathersealtobeprovidedthroughouttheframe.ThedoorframetobefixedtothewallusingM.S.screw

sof65/100mmsize,completeaspermanufacturer’sspecificationanddirectionofEngineer-in-Charge.

ProvidingandfixingfactorymadepanelPVCdoorshutterconsistingofframemadeoutofM.S.tubesof19

gaugethicknessandsizeof19mmx19mmforstylesand15x15mmfortop&bottomrails.M.S.frameshall

haveacoatofsteelprimersofapprovedmakeandmanufacture.M.S.framecoveredwith5mmthickheat

mouldedPVC'C'channelofsize30mmthickness,70mmwidthoutofwhich50mmshallbeflatand20mms

hallbetaperedin45degreeangleonbothsideformingstylesand5mmthick,95mmwidePVCsheetoutof

which75mmshallbeflatand20mmshallbetaperedin45degreeontheinnersidetoformtopandbottom

railand115mmwidePVCsheetoutofwhich75mmshallbeflatand20mmshallbetaperedonbothsidesto

formlockrail.Top,bottomandlockrailsshallbeprovidedbothsideofthepanel.10mm(5mmx2)thick,20

mmwidecrossPVCsheetbeprovidedasgapinsertfortoprail&bottomrail,panelingof5mmthickbothsi

dePVCsheettobefittedintheM.S.framewelded/sealedtothestyles&railswith7mm(5mm+2mm)thic

kx15mmwidePVCsheetbeadingoninnerside,andjoinedtogetherwithsolventcementadhesive.Anad

ditional5mmthickPVCstripof20mmwidthistobestuckontheinteriorsideofthe'C'ChannelusingPVCso

lventadhesiveetc.completeasperdirectionofEngineer-in-charge, manufacturer's specification &

drawing.30 mm thick pre laminated both side PVC door shutters

Providing and fixing 4mm th.Acrylic sheet of approved quality including fixing with door/window

shutter & frames with necessary all fixtures as dircted by engg.in charge etc.comp.

Sr. no Item Description Unit Quantity Unit Rate Amount

GRANITE FRAME FOR DOORS

Providing and fixing 18 mm thick Granite mirror polished, premoulded and prepolished

of any size (for All floor/all height), machine cut for window sills/frame,Door Frame/jambs

facias and similar locations of required size, approved shade, colour and texture laid over

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

2.4 mixed with matching pigment or epoxy touch ups, including rubbing, curing, moulding and SMT 100.00 3,417.86

polishing to edges to give high gloss finish etc. complete at all levels as per dwg &

instruction of EIC. Rate inclludes providing & fixing with APPROVED FASTENERS min. 7.5cm long

of 6mm diameters in cement mortar 1:2 (1 cement : 2 fine sand) including making rebate for

door shutter in Granite, edege polishing etc. completed as directed by EIC. (For payment only

opening surface area will be considered.) (SVP Approved rate)

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame in all floor

levels with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement

concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate

mm nominal size) & as per the instructions of EIC. (SVP Approved rate)

Providing & fixing minimum 30 minutes fire retardant ISI 37mm thk single/double shutter

Single/Double swing waterproof flush door of 35mm solid core construction with

pinewood/hardwood with crossband and face veneer of 2mm plywood face panels both side,

with 1mm thk approved laminated on both faces of shutter with grooves and approved by

2.6 architects or consultants of any colour, with bonding agent including fevicol, nails, moulding, SMT 10.00 3,607.99

architrives patti / border with 2nd class teak wood, as per drawings,specifications &

complete as directed by EIC at all lead & lift at all floor levels & locations.

Note :All necessary hardwares & accessories will be paid extra in saperate item. (SVP Approved

Providing & fixing ISI 37mm thk single/double shutter Single/Double swing waterproof flush

door of 35mm solid core construction with pinewood/hardwood with crossband and face

veneer or 2mm plywood face panels, with 1mm thk approved laminated on both faces of

shutter with grooves approved by architects or consultants of any colour, with bonding agent

2.7 including fevicol, nails, moulding, architrives patti / border with 2nd class teak wood, as per SMT 50.00 2,404.34

drawings, specifications & complete as directed by EIC at all lead & lift at all floor levels

Note :All necessary hardwares & accessories will be paid extra in saperate relevant item. (SVP

2.8 MORTICE LOCK DEAD BOLT WITH DOUBLE CYLINDER -

Providing and fixing stainless steel dead lock EC and both side Key cylinder of 60mm size with

necessary ss screws etc .complete as per approved make list and sample approved by EIC .Rate NOS 10.00 750.40

shall be for all heights, all floors and all places . (SVP Approved rate)

2.9 MORTICE LOCK DEAD BOLT WITH SINGLE CYLINDER

Providing and fixing stainless steel dead lock EC and Euro profie Cylinder with one side

key and one side knob as per approved make list with necessary ss screws etc .complete as

per sample approved by EIC .Rate shall be for all heights ,all floors and all places . (SVP

2.10 THUMB TURN & COIN SLOT -

Providing and fixing dead lock EC and Euro profile cylinder-coin and knob 60 mm of as

per approved list, and sample approved by EIC .Rate shall be for all heights ,all floors and all NOS 3.00 840.96

places . (SVP Approved rate)

2.11 FLOOR SPRING (HEAVY DUTY) -

Providing and fixing stainless steel adjustable floor spring as per approved make list with

necessary ss phillips head screws etc .complete as per drawing and sample approved by NOS 77.00 2,631.65

EIC .Rate shall be for all heights ,all floors and all places . (SVP Approved rate)

2.12 FLUSH BOLT -

Providing and fixing Manual Flush bolt for Metal doors 172mm (with 300mm length rod) as per

approved make list as per sample approved by EIC .Rate shall be for all heights ,all NOS 100.00 442.60

floors and all places . (SVP Approved rate)

2.13 S.S DOOR STOPPER -

Providing and fixing stainless steel hanging type floor door stopper as per approved make list as

per sample approved by EIC .Rate shall be for all heights ,all floors and all places . (SVP NOS 10.00 160.88

2.14 SS PULL HANDLE -

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and fixing Stainless Steel handles of for 22 mm dia 300 mm long with

necessary ss screws etc

.complete as per approved make list as per drawing and sample approved by EIC .Rate shall be

for all heights ,all floors and all places . (SVP Approved rate)

2.15 SS concealed HANDLE -

Providing and fixing Stainless Steel concealed handles as per approved list with approved

quality with necessary screws etc.complete for 120 mm long. (SVP Approved rate)

2.16 SS PULL HANDLE -

Providing and fixing Stainless Steel handles of 19 mm dia 200 mm long with necessary

.complete as per approved make list as per sample approved by EIC .Rate shall be for all heights

,all floors and all places . (SVP Approved rate)

2.17 SS LEVER HANDLE -

Providing and fixing Stainless Steel lever handles(8 inch) with necessary ss screws etc

.complete as per approved make list as per sample approved by EIC. Rate shall be for all NOS 15.00 1,003.22

heights ,all floors and all places . (SVP Approved rate)

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc.

:125x64x1.9 mm. Approved make as mention in approved list with approved quality with

necessary screws etc. complete. (SVP Approved rate)

Providing and fixing door solenoid electromagnet with stainless steel screws etc. complete as

b per approved make list as per sample approved by EIC. Rate shall be for all heights, all floors NOS 10.00 678.57

and all places. (SVP Approved rate)

2.19 HYDRAULIC DOOR CLOSER(HEAVY DUTY) -

Providing & fixing door closer with necessary SS screws etc complete. as per approved

make list as per drawing and sample approved by EIC.Rate shall be for all heights ,all floors

and all places and shall be inclusive of fixing with using the templete as per supplier's NOS 50.00 1,396.17

specification & maintaing in good working condition uptill defect liability period. (SVP

2.20 HYDRAULIC DOOR CLOSER(MEDIUM DUTY) -

Providing & fixing door closer with necessary SS screws etc complete. as per approved

make list as per drawing and sample approved by EIC .Rate shall be for all heights ,all floors

and all places and shall be inclusive of fixing with using the templete as per supplier's NOS 50.00 1,130.02

specification & maintaing in good working condition uptill defect liability period. (SVP

2.21 KICK PLATE -

Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm, anodised (anodic

coating not less than grade AC 10 as per IS :1868), transparent or dyed to required NOS 100.00 145.13

colour or shade, with necessary screws etc. complete. (SVP Approved rate)

2.22 PUSH PLATE -

DOORS, WINDOWS & FIXED PARTITION WORKS at any Height as per insturctions of EIC.

Providing and fixing in position frames and shutters for aluminium door / composite door-

window / window / casement window / Fixed Partition / Double Glazed Window in

aluminum sections of approved make having minimum 25 micron colour anodizing of

approved shade sections.It shall be free from defects and shall be guaranteed for 10 years. Rate

shall be inclusive of providing aluminium sections, cutting, fabrication, errection and fixing to

the best workmanship manner, including 1) Sheet metal screws and aluminium angle corner

cleat of minimum 3mm thicknes and of full width etc for assembling the frame 2) Glazing clips

for receiving infill panel 3) EPDM Rubber gasket for glass beading 4) Anchor fasteners of

approved make for fixing the frame assembly to the RCC or masonary surfaces. Minimum

1 anchor fastener shall be used for every 750mm length of section for stability of frame.

5) 10 mm GI tie rod at top and bottom to

INCLUDING : All rates are inclusive of all material, labour, wastage, necessary scaffolding for

fabrication and erection at all places and at all heights.

Unit weight per running meter shall be worked out from actual samples of every type of

Aluminium section and actual lengths shall be measured for calculating the total weight of

aluminium door, window and Fixed partition sections. BUT EXCLUDING: 1) Hardware viz.

locks, handles, hinges, pivot Work shall have to be carried out as per the drawings and

approved sample.

Actual / theoretical weight of installed Aluminium sections which are visible only shall be

measured and shall be considered for the payment. (SVP Approved rate)

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and fixing 21mm double glazed hermetically sealed glazing in aluminum windows,

Door, ventilators, Structural Glazing works. DGU Shall be comprising of 5mm glass KT 140 or

2.24 equivalent+ 12 mm air gap + 4 mm clear pannelled glass as per specifications. The rate SMT 15.00 3,840.59

includes for work at any Height as per insturctions of EIC. to withstand the seismic

force, wind force, water and rain force. (SVP Approved rate)

Providing and fixing 6mm thick clear float toughened glass of specified thickness in frame work

with necessary cutting of glass as per specifications including providing and fixing EPDM quality

2.25 rubber/ silicon sealent on the periphery of the glass as per the required thickness etc. Sqm 50.00 1,891.58

complete at all floors, all levels, all heights and in all shapes as per the directions of EIC.

Actual installed quantity shall be measured paid. (SVP Approved rate)

Providing and fixing wood work in frames of doors, windows, clerestory windows and other

2.26 frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of -

required dia & length & As per the directions of EIC. (SVP Approved rate)

Sal wood CMT 1.00 65,474.46

Providing and fixing in position SS 304 Mosquito net of 12x28 gauge for sliding shutter/fixed

shutter or infront of louvers as per drawing detail and as per approved sample to be

approved by Architect or Engineer-in-charge, at all floors, all levels, all hights. Only mosquito

net shall be measured and paid in Sqm. (SVP Approved rate)

Providing and fixing 8 mm thick Medium-density fibreboard (MDF) conforming to IS: 14587 in

panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass /

2.28 stainless steel screws etc. complete at all floors, all levels, all heights and in all shapes as per SMT 25.00 800.22

drawings and directions of engineer-in- charge - MDF board with decorative lamination on both

sides. (SVP Approved rate)

Providing and fixing 6mm thick Frosted glass fixed within specified thickness of frame work

with necessary cutting of glass as per drawing & specifications including providing and fixing

2.29 EPDM quality rubber / silicon sealant on the periphery of the glass as per the required thickness SMT 50.00 1,288.93

as per the directions complete at all floors, all levels, all heights and in all shapes as per the

directions of EIC. Actual installed quantity shall be measured and paid.

R&B SOR 2024-25, Item Code . 11029, page no.114

Providing and applying Frosted film of minimum 70 micron on glass as per design and

directions of Architect/Engineer-in-charge. Rates should be inclusive of all taxes and fixing,

plotter cutting and designing with proper level, with out air bubbles / cuts / folds etc.

complete.Actual installed quantity on site will be measured and paid. (SVP Approved rate)

R&B SOR 2024-25, Item Code . M258, page no.15

Providing and fixing 5 mm. thick 30 minutes Fire rated glass fixed within specified thickness of

frame work with necessary cutting of glass as per drawing & specifications including providing

and fixing EPDM quality rubber

/ silicon sealant on the periphery of the glass as per the required thickness as per the

directions of Engineer-in-charge. Actual installed quantity shall be measured and paid.

Note: For payment clear opening as per drawing will be considered. (SVP Approved rate)

Providing and fixing in position Curtain Wall with 4MM. Aluminium Composite Panel of

Flexibond, EuroBond, Timex Bond or equal make for Cladding with open grooves for linear as

well as curvilinear portions of the building , for all heights and all levels etc. including: 4mm

2.32 thick aluminium composite panel material consisting of 3mm thick FR grade mineral core SMT 10.00 3,300.58

sandwiched between two Aluminium sheets (each 0.5mm thick). Tshall be measured in sqm. up

to two decimal places. Rates apply for all floor, all levels and all height and Including all kind of

scafolding. (SVP Approved rate)

4 mm th. ACP WORK as dir. by EIC for any lead and lift incl. rate of formwork etc. compl. (SVP

Providing and fixing Minimum 10 mm thick multiwall, IR/UV obstructing Polycarbonate sheet

roofing including curved surface, cutting to size and shape wherever required as per detailed

drawing, and fixing to structure as per Manufacturer Standered Practice with bolts and nuts

8mm diameter with washers and other accessories complete as per directions of EIC. Rates

apply for all floor, all levels and all height and Including all kind of scafolding. (Sebic lexan or

equivalent.) (SVP Approved rate)

TOTAL OF PART-II

PART - III STEEL WORKS

Sr. no Item Description Unit Quantity Unit Rate Amount

Supplying and fixing rolling shutters of approved make, made of required size M.S.laths,

interlocked together through their entire length and jointed together at the end by end locks,

mounted on specially designed pipe shaft with brackets, side guides and arrangements for

inside and outside locking with push and pull operation complete, including the cost of

providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel

wire of adequate strength conforming to IS: 4454 – part 1 and M.S. top cover of required

thickness for rolling shutters & as per the directions of EIC.

80x1.25 mm M.S. laths with 1.25 mm thick top cover.

R&B SOR 2024-25, Item Code . 11005A, page no.111

Providing, supplying, fabricating and erecting in position the structural steel works of

grade E250 for grill, railing, bars, truss, purlins, runners, cleats or any other member etc for

ACP cladding, polycarbonate roofing, structural glazing work etc. , all other structural elements

as per drawing, made up from closed structural steel hollow sections (RHS/SHS/angle channel

,square, ftat, tee, bars etc.) of as per weather resistant of Tata Structural / sections or an

approved equivalent as per details / drawings/instructions including cutting, bending,

jointing, connecting, welding and / bolting and / riveting and fabricating and erecting in position

etc complete as directed. The rate to include all necessary fixtures, fastening including welding

rods, nuts bolts, rivets etc. of standard approvded quality etc for complete the job. The rate

shall also include the two coats of synthetic enamel paint over a coat of an anti-corrosive

paint.& necessary scaffolding etc. complete as directed.

Rates apply for all floor, all levels and all height & as per the directions odf EIC.

R&B SOR 2024-25, Item Code . 20054, page no.158

Providing & fixing MS door with Shutter for steel sheet 18 G, and angel of 40x40x6 mm and

steel doors frame of required size including anodised Iron butt hinges and fitting and fastening

with necessary screws.Rate also incl. two coats of multisurface paint etc All as per detailed

drawing /directions of EIC. (Door size 1000 x2100 mm) (SVP Approved rate)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes or architectural

members as per drawing etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless steel nuts and

bolts omplete, i/c fixing the railing with necessary accessories & stainless steel dash

fasteners , stainless steel bolts etc., of required size, on the top of the floor or the Side of

waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for

payment purpose only weight of stainless steel members shall be considered including fixing

accessories such as nuts, bolts, fasteners etc.). (SVP Approved rate)

Fabrication, supplying & installation of approved make top mounted SS-304 Grade railing made

of minimum Dia. 40mm X 1.5 mm SS top rail fixed on SS Baluster of minimum Dia. 38 x 1.5 mm

thk. with SS modular neck per manufacturers spects to hold the top rail. The total height of the

rail including top rail will be minimum 915 mm from FFL and maximum 1000mm. All Top rail

joint will be connected by using argon welding only. The baluster is infill with minimum 10mm

thk. clear toughened glass of minimum height 700 mm & length as per layout connected to

3.5 the baluster with 2 nos. of CNC made SS Glass holders. Furhter the baluster is top RMT 20.00 12,300.63

mounted with SS-304 grade base plate as per manufacturers spects. fixed on the floor with 3/4

Nos. of M8 x 85 mm long dash fasteners.The Baluster is made by using modern machinery

like Robotic Welding, Laser Cutting , CNC Machines etc.All SS Components are in SS-304 grade

in satin finish only.The Average Center to Center minimum distance considered is 1000 mm

and maximum 1200mm center to center & as per the instructions of EIC. (SVP Approved

TOTAL OF PART-III STEEL WORKS

PART - IV FLOORING, SKIRTING AND WALL DADO WORKS -

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and laying 1st quality Full body Glazed vitrified floor tiles in 600 mm x 600 mm

size (size and thickness to be specified by the manufacturer), as per approved make,

approved by EIC with water absorption less than 0.08%,Stain proof and conforming to

relevant code of approved make, in all colours and shades, set in cement slurry over minimum

20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) laid to proper slope or as required

on site, line and level, as specified including using neat cement paste about 3 kg/sq.Mtr,

protection with minimum 10mm thick POP Laying over PVC bubble Sheet/Floor protector

approved by EIC and later removing and maintaining it till handing over, including cutting

of tiles,curing and cleaning complete all as per detailed drawings and specifications as

directed by EIC for all lift,all floor levels and leads. The item to include all materiral, fixing,

scaffolding, labour, Wastage etc. complete in all respects.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring

area. Rate shall be inclusive of cutting of tiles in any shape, at any level for service cutout. (SVP

4.1.a Upto Fourth Floor including Basement SMT 25.00 1,025.00

4.1.b Fifth Floor To Eighth Floor SMT 25.00 1,047.32

4.1.c Ninth Floor To Twelfth Floor SMT 25.00 1,069.64

4.1.d Thirteenth Floor To Sixteenth Floor SMT 25.00 1,091.96

4.1.e Seventeenth Floor To Terrace SMT 25.00 1,114.29

Providing and fixing 1st quality Full body Glazed vitrified skirting size specify in drawing using in

600 mm x 600 mm size (size and thickness to be specifiedby the manufacturer), as per

approved make, approved by EIC, with water absorption less than 0.08%,Stain proof and

4.2 conforming to relevant code laid on 12 mm thick cement paste 1:3 (1 cement : 3 coarse -

sand) & jointed with white cement and applying neat cement paste about 3 kg/sq.Mtr

below tile, also including cutting of tiles,curing,cleaning complete all as per detailed drawings

and specifications as directed by EIC for all lift, levels and leads. (SVP Approved rate)

4.2.a Upto Fourth Floor including Basement SMT 10.00 1,023.21

4.2.b Fifth Floor To Eighth Floor SMT 10.00 1,045.54

4.2.c Ninth Floor To Twelfth Floor SMT 10.00 1,067.86

4.2.d Thirteenth Floor To Sixteenth Floor SMT 10.00 1,090.18

4.2.e Seventeenth Floor To Terrace SMT 10.00 1,112.50

Providing and Fixing 1st quality Full body Glazed vitrified tile dado in 600 mm x 600 mm

size (size and thickness to be specified by the manufacturer), as per approved make,as per

detail drawings and approved by EIC with water absorption less than 0.08%,Stain proof and

conforming to relevant code of approved make, in all colours and shades, set in cement slurry

over minimum 10 mm thick cement mortar 1:3 laid to proper slope, line and level, as specified

4.3 including using neat cement paste about 3 kg/sq.Mtr ,including gap filling in white cement -

mixed with pigment of matching shade, complete all as per detailed drawings and

specifications as directed by EIC for all lift,all floor levels and leads. The item to include all

materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring area.

(SVP Approved rate)

4.3.a Upto Fourth Floor including Basement SMT 25.00 1,087.50

4.3.b Fifth Floor To Eighth Floor SMT 25.00 1,109.82

4.3.c ninth Floor To Twelfth Floor SMT 25.00 1,132.14

4.3.d Thirteenth Floor To Sixteenth Floor SMT 25.00 1,154.46

4.3.e Seventeenth Floor To Terrace SMT 25.00 1,176.79

Providing and fixing 1st quality ceramic tile dado of 300mm x 600mm (size and thickness to be

specified by the manufacturer), as per approved make, detail drawings and approved by

EIC. Tile must be Stain resistant and conforming to relevant code on 12 mm thick cement

paste 1:3 (1 cement : 3 coarse sand) & jointed with white cement and applying neat

4.4 cement paste about 3 kg/sq.Mtr below tile, curing and cleaning complete all as per detailed -

drawings and specifications as directed by EIC for all lift, levels and leads.The item to

include all materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring area.

(SVP Approved rate)

4.4.a Upto Fourth Floor including Basement SMT 25.00 904.46

4.4.b Fifth Floor To Eighth Floor SMT 25.00 926.79

4.4.c ninth Floor To Twelfth Floor SMT 25.00 949.11

4.4.d Thirteenth Floor To Sixteenth Floor SMT 25.00 971.43

4.4.e Seventeenth Floor To Terrace SMT 25.00 993.75

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and fixing 1st quality anti skid ceramic flooring using 600mmx 600mm (size and

thickness to be specified by the manufacturer), as per approved make, detail drawings and

approved by EIC. Tile must be stain resistant, on 20 mm thick cement mortar 1:4 laid to proper

slope or as required on site & jointed with white cement and applying neat cement paste

about 3 kg/sq.Mtr below tile,protection with minimum 10mm thick POP Laying over PVC

bubble Sheet /Floor protector approved by EIC and later removing and maintaining it till

handing over,curing and cleaning complete all as per detailed drawings and approved by

Architect and specifications as directed by EIC for all lift, levels and leads. The item to include

all materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring

area. Rate shall be inclusive of cutting of tiles in any shape, at any level for service cutout. (SVP

4.5.a Upto Fourth Floor including Basement SMT 20.00 895.54

4.5.b Fifth Floor To Eighth Floor SMT 20.00 917.86

4.5.c ninth Floor To Twelfth Floor SMT 20.00 940.18

4.5.d Thirteenth Floor To Sixteenth Floor SMT 20.00 962.50

4.5.e Seventeenth Floor To Terrace SMT 20.00 984.82

Providing and fixing 1st quality ceramic tile dado of 600mm x 600mm (size and thickness to be

specified by the manufacturer), as per approved make, as per detail drawings and

approved by EIC. Tile must be Stain resistant, on 12 mm thick cement paste 1:3 (1 cement :

coarse sand) & jointed with white cement and applying neat cement paste about 3 kg/sq.Mtr

4.6 below tile, curing and cleaning complete all as per detailed drawings and specifications as -

directed by EIC for all lift, levels and leads. The item to include all materiral, fixing, scaffolding,

labour, Wastage etc. complete in all respects.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring area.

(SVP Approved rate)

4.6.a Corridor - Upto Fourth Floor including Basement SMT 10.00 939.29

Fire Stair - FS1 & FS2 SMT 10.00 939.29

4.6.b Corridor - Fifth Floor To Eighth Floor SMT 10.00 961.61

Fire Stair - FS1 & FS2 SMT 10.00 961.61

4.6.c Corridor - Ninth Floor To Twelfth Floor SMT 10.00 983.93

Fire Stair - FS1 & FS2 SMT 10.00 983.93

4.6.d Corridor - Thirteenth Floor To Sixteenth Floor SMT 10.00 1,006.25

Fire Stair - FS1 & FS2 SMT 10.00 1,006.25

4.6.e Corridor - Seventeenth Floor To Terrace SMT 10.00 1,028.57

Fire Stair - FS1 & FS2 SMT 10.00 1,028.57

Providing and fixing 1st quality ceramic tile of 300mm x 200mm for flooring and on dado (size

and thickness to be specified by the manufacturer), as per approved make, as per detail

drawings and approved by EIC. Tile must be Stain resistant, on 12 mm thick cement paste 1:3

(1 cement : 3 coarse sand) & jointed with white cement and applying neat cement paste about

3 kg/sq.Mtr below tile, protection with Gypsum / Pop layer over Plastic sheet /Floor

protector approved by EIC and maintaining it till handing over, curing and cleaning

complete all as per detailed drawings and specifications as directed by EIC for all lift,

levels and leads. The item to include all materiral, fixing, scaffolding, labour, Wastage etc.

complete in all respects.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring

area. Rate shall be inclusive of cutting of tiles in any shape, at any level for service cutout. (SVP

Providing and laying tactile tile of size 300x300 (size and thickness to be specified by the

manufacturer), as per approved make, as per detail drawings and approved by EIC having with

water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours

and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on

20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns

4.8 including grouting the joints with white cement mixed with matching pigments etc. -

Protection with minimum 10mm thick POP Laying over PVC bubble Sheet and later removing

complete as per direction of Engineer-in-Charge.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring

area. Rate shall be inclusive of cutting of tile in any shape at any level. Item is for all lift, levels

and leads. (SVP Approved rate)

4.8.a Upto Fourth Floor SMT 5.00 623.21

4.8.b Fifth Floor To Eighth Floor SMT 5.00 645.54

4.8.c ninth Floor To Twelfth Floor SMT 5.00 667.86

4.8.d Thirteenth Floor To Sixteenth Floor SMT 5.00 690.18

4.8.e Seventeenth Floor To Terrace SMT 5.00 712.50

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing & laying 18mm thick mirror polished Granite sandwitch platform of required Granite

Top pattern stone of approved shade and sample on top and 25 mm thk kota in bottom with

mm thk screed of (1:2:4) in between with sandwitch supports of 25 mm thk two kota on sides

and screed in between as per design and approved sample for all floors / all levels / all

heights. The rate includes cutting for sink, rounding, champhering and mirror polishing of

4.9 edges, facias of granite, including necessary bonding adhesive like Araldite or equivalent. SMT 15.00 3,905.36

(Only plan area will be measured and paid). The rate includes rounding, champhering and

mirror polishing of edges. Rate shall be exclusive of SS sink, , Piller tap, Bib tap-couplin etc. The

item to include all materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects &

as directed by EIC. at any level. Item is for all lift, levels and leads.Required test shall be done as

per relavent IS Code. (SVP Approved rate)

Providing and laying Granite slab (18 mm thick) one side polished flooring, over 20 mm

(average) base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with

grey cement slurry including rubbing, matching color pigments including hand polishing for

removing any unevenness on the surface,curing and cleaning complete all as per detailed

drawings and specifications as directed by EIC for all lift, all floor levels and leads.The item to

includes all materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects. Required

test shall be done as per relavent IS Code. Protection with minimum 10mm thick POP Laying

over PVC bubble Sheet /Floor protector approved by EIC and later removing complete as per

direction of Engineer- in-Charge.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring

area. Rate shall be inclusive of cutting of slab in any shape, at any level for service cutout. (SVP

Providing and fixing 18 mm thick machine cut, mirror / egg shell polished , Granite stone

work of approved shape, size, color, design and pattern as per approved EIC for wall lining

(veneer work) including dado, skirting, risers of steps, lift facade, ledges, etc., including

edge moulding,rounding the edges etc. wherever required as per design & grooves and

moulds truly in plumb in required design and pattern wherever required, stones of different

finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand)

laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white

4.11 cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing, SMT 10.00 3,556.79

removing any unevenness on the surface etc. all complete as per drawings, and as directed by

the Engineer-in-Charge for all lift,all floor levels, all heights and leads. The item to include all

materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects. Required test shall

be done as per relavent IS Code.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring

area. Rate shall be inclusive of cutting of slab in any shape, at any level for service cutout. (SVP

Providing and fixing 18 mm thick Granite stone mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of

required size, approved shade, colour and texture laid over 20 mm thick base cement mortar

1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to

give high gloss finish etc. complete at all levels.The item to include all materiral, fixing,

scaffolding, labour and all wastage etc. complete in all respects as per directed by EIC.

Required test shall be done as per relavent IS Code.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring

area. Rate shall be inclusive of cutting of stone in any shape, at any level for service

cutout, including moulding, rubbing and polishing of cut edges etc. complete. (SVP Approved

Providing and laying 25mm. thick polished kota stone flooring over 20 mm.(average) thick base

of cement mortar 1:4 (1 cement : 4 coarse sand) laid over and jointed with gray cement

slurry including rubbing & polishing etc. complete.

Note:Rate includes all lift,all floor levels, all heights and leads. The item to include all

materiral, fixing, moulding as per drawing, scaffolding, labour, Wastages etc. Protection with

minimum 10mm thick POP Laying over PVC bubble Sheet /Floor protector approved by EIC

and later removing complete as per direction of Engineer-in-Charge.complete in all respects

as directed by EIC. No extra payment pay for architectural Design upto 10% of flooring area.

Rate shall be inclusive of cutting of stone in any shape, at any level for service cutout.

(SVP Approved rate)

R&B SOR 2024-25, Item Code . 14012AA, page no.128

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and laying polished kota stone 25 mm thick in risers of steps,

Skirting, dedo, cladding(internal/External) and pllars laid on 10 mm thick cement mortar 1:3

(1 cement : 3 coarse sand) and jointed with gray cement slurry including rubbing & polishing

etc. complete as directed by EIC.

Note:Rate includes all lift,all floor levels, all heights and leads. The item to include all

materiral, fixing, moulding as per drawing, scaffolding, labour, Wastages etc. complete in all

respects. No extra payment pay for architectural Design upto 10% of flooring area. Rate shall be

inclusive of cutting of stone in any shape, at any level for service cutout. (SVP Approved rate)

R&B SOR 2024-25, Item Code . 14013A, page no.128

Making grooves in any surface or any flooring as per design, including forming straight

deep curved two numbers of gishi (Antiskid groove), as per sample approved including

polishing on two sides of the roughened area, chiselling etc. complete. as per drawing & as

directed by EIC for all floors / all levels / all heights. (SVP Approved rate)

Providing & laying 30mm thick Red sand stone work (machine cut edges) for wall lining etc. upto

Terrace floor Height, backing filled with a grout of average 12 mm thick cement mortar

1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white

cement : 2 stone dust) with an admixture of pigment matching the stone shade Red sand

4.16 stone Exposed face machine cut and table rubbed with rough backing.30 mm thick.The item to SMT 1.00 2,974.71

include all materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects & as

directed by EIC.

Note: No extra payment pay for Ornamental Design upto 10% of flooring area. Rate shall

be inclusive of cutting of tiles in any shape, at any level for service cutout. (SVP Approved rate)

Providing & laying cement concrete flooring 1:2:4(1 cement : 2 coarse sand : 4 Stone aggregate

20mm normal size) laid in one layer finished with a floating coat of neat cement & as directed

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring

area. Rate shall be inclusive of cutting of tiles in any shape, at any level for service cutout. (SVP

R&B SOR 2024-25, Item Code . 14015BA, page no.128 .

Supplying and fixing Conductive anti static homogeneous Anti bacterial & Anti fungal Vinyl

flooring rolls of P group of approved make & shade minimum 2.0 mm thick of standard sizes as

per EN 649/relevant code of manufacturers specification having 10 years replacable

warranty over the existing floor.The rate shall include all cuttings and wastages, cutting

and providing tile above electrical trunking, cost of all materials adhesives of approved

make etc, including welding of joints.,Coving and copper strips, complete all as per

4.19 detailed drawings and specifications as directed by EIC .Material to be installed using SMT 50.00 2,060.00

Conductive Adhesive only. Only laid area will be measured for payment.Rate includes lead and

lift at all floors. The item to include all materiral, fixing, scaffolding, labour, Wastage etc.

complete in all respects.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring

area. Rate shall be inclusive of cutting of tiles in any shape, at any level for service cutout.(SVP

Supplying and fixing Vinyl homogeneous (Anti static, Antifungal & Anti Bacterial) flooring vinyl

rolls T group of approved make & shade minimum 2.0 mm thick with wear layer of 0.70mm

thickness of standard sizes as per EN 649/relevant code of manufacturers specification

having 10 years replacable warranty over the existing floor.The rate shall include all cuttings

and wastages, cutting and providing tile above electrical trunking, cost of all materials adhesives

of approved make etc, including welding of joints.Coving, complete.Material to be installled

using Water based Adhesive only. Only laid area will be measured for payment. Rate includes

lead and lift at all floors. The item to include all materiral, fixing, scaffolding, labour, Wastage

etc. complete in all respects & as directed by Architect/EIC.

Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring

area. Rate shall be inclusive of cutting of tiles in any shape, at any level for service cutout(SVP

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over cement mortar 1 : 3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement including rounding off junctions

and extending them up to 15 cm along the wall cleaning with water and oxalic acid etc. as

4.21 per Architect drawing & directed by EIC. The item to include all materiral, fixing, SMT 300.00 739.89

scaffolding, labour, Wastage etc. complete in all respects. As per drawing for all floors / all

levels / all heights.

Note: Rate shall be inclusive of cutting of tiles in any shape, at any level for service cutout. (SVP

R&B SOR 2024-25, Item Code . 14035, page no.130

Providing and laying Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and

0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of

Engineer-in-charge. Size of Tile 600 x 600 mm.

Note: Rate shall be inclusive of operating this item at any level and for all lift, levels and leads.

(SVP Approved rate)

TOTAL OF PART-IV

PART - V PLASTERING,PAINTING AND CEILING WORKS -

For Internal walls Basement-2 to terrace -

Providing and applying 6 mm thick (average) premixed formulated one coat gypsum

lightweight plaster of Sentgobin GyprocPlaster/ kerakoll plaster/Ferrous crete OR EQUIVELANT

MAKE APPROVED BY EIC Plaster having additives and light weight aggregates as vermiculite /

5.1 periite respectively conforming to relevant IS applied on hacked / uneven background such as SMT 100.00 165.18

bare brick / block / RCC work on walls & ceiling at all floors and locations, all floor and all height

including necessary scaffolding finished in smooth line and level etc. complete as directed by

EIC. (SVP Approved rate)

Providing and laying 15mm thick single coat plaster, Preparing surface, Inner wall surfaces

Plastering with cement mortar in proportion of 1:4 (1 cement : 4 fine sand) to all walls

finished smooth with complete and including roughening the surfaces with necessary

5.2 scaffolding, curing, cleaning the floor after application, For all levels, hights and leads of -

works.The item to include all materiral, scaffolding, labour etc. complete in all respects.

Note: No extra payment pay for architectural Ornamental Design.

Plastering internal walls .

basement-2 to 2nd floor SMT 15.00 155.61

3rd floor SMT 15.00 178.77

4th floor SMT 15.00 201.93

5th floor SMT 15.00 225.09

6th floor SMT 15.00 248.25

7th floor SMT 15.00 271.41

8th floor SMT 15.00 294.57

9th floor SMT 15.00 317.73

10th floor SMT 15.00 340.89

11th floor SMT 15.00 364.05

12th floor SMT 15.00 387.21

13th floor SMT 15.00 410.37

14th floor SMT 15.00 433.53

15th floor SMT 15.00 456.69

16th floor SMT 15.00 479.85

17th floor SMT 15.00 503.01

Terrace SMT 15.00 526.17

R&B SOR 2024-25, Item Code . 17002B, 17007A, page no.136,

Providing 10 mm. thick cement plaster in single coat on brick/concrete wall for interior

5.3 plastering upto floor two level finished even and smooth in SMT 50.00 114.66

[II] Cement mortar 1:4 (1 cement : 4 fine sand) as directed by EIC.

R&B SOR 2024-25, Item Code . 17001B, page no.136

Extra over items 5.3 for plastering on ceiling and soffits of stairs above floor two level

for every additional storey height as directed by EIC. (SVP Approved rate)

R&B SOR 2024-25, Item Code . 17006, page no.137

Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement :

5.5 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 SMT 15.00 269.78

Coarse sand) finished with trovel including scaffolding curing etc. complete. The item to

include all materiral, scaffolding, labour etc. complete in all respects.

R&B SOR 2024-25, Item Code . 17017, page no.138

Sr. no Item Description Unit Quantity Unit Rate Amount

Exterior Plaster -

Providing and laying 15mm thick plaster on Exterior wall and Preparing surface, exterior

wall surfaces Plastering with cement mortar in proportion of 1:4 (1 cement : 4 fine sand) to

all walls finished smooth with complete and including roughening the surfaces with

necessary scaffolding, curing, cleaning the floor after application, providing & fixing chicken

wire mesh of 24 gauge of 300 mm width at the junction of block/brick work & RCC work

including fixing with nails, rawl plugs etc before applying plaster as per drawing/instruction of

Engineer In Charge/ Client, complete. For all levels, hights and leads of works.The item to

include all materiral, scaffolding, labour etc. complete in all respects.

From Ground lavel up to 2nd floor.

Note: No extra payment pay for architectural Ornamental Design (SVP Approved rate)

5.6a 3rd floor SMT 15.00 132.99

5.6b 4th floor SMT 15.00 166.88

5.6c 5th floor SMT 15.00 200.76

5.6d 6th floor SMT 15.00 234.64

5.6e 7th floor SMT 15.00 268.53

5.6f 8th floor SMT 15.00 302.41

5.6g 9th floor SMT 15.00 336.29

Providing and laying, 20 mm thick double coat sand face plaster to the External side of

walls, Beams, Columns, pardi & RCC walls etc in the proportion of cement mortar 1:3 for first

coat (12 mm thick) and cement mortar 1:1 for second coat (8 mm thick) to all types and shapes

of blocks/brick, stones or RCC surfaces at all respective levels in line, level and plumb including

hacking, normal straps, grooves, drip moulds, embossed bands, jambs, etc. complete and

including roughening the RCC surfaces with necessary scaffolding, curing, cleaning the floor

after application, providing & fixing chicken wire mesh of 24 gauge of 300 mm width at the

junction of block/brick work & RCC work including fixing with nails, rawl plugs etc before

applying plaster as per drawing/instruction of Engineer In Charge/ Client, complete. For all

levels, hights and leads of works. The item to include all materiral, scaffolding, labour, Wastage

etc. complete in all respects.

Note: No extra payment pay for architectural Ornamental Design. (SVP Approved rate)

5.7.1.a Upto Fourth Floor SMT 15.00 268.75

5.7.1.b Fifth Floor To Eighth Floor SMT 15.00 286.61

5.7.1.c ninth Floor To Twelfth Floor SMT 15.00 304.46

5.7.1.d Thirteenth Floor To Sixteenth Floor SMT 15.00 322.32

5.7.1.e Seventeenth Floor To Terrace SMT 15.00 340.18

PAINTING WORKS -

Providing & Applying two coats of silicon & acrylic emulsion based water thinnable sealer of

approved list of make/ manufacture on wet or patchy portion of plastered surfaces of required

shade on all inner wall surfaces to give an even shade over & including primer on wall surface

having VOC content less than 50 grams/litre with two coats after thoroughly brushing the

5.8 surface free from mortar dropping & other foreign matter and also 2 coats of water resistent SMT 500.00 119.87

putty over primer in two coats to give a smooth and even finish. The rate includes scrapping the

non plastered surface as per drawing/instruction of Engineer In Charge/ Client, complete. For all

levels, heights and leads of works, Including all materiral, scaffolding, labour etc. complete in

all respectsas per instruction of EIC. (SVP Approved rate)

Providing & Applying two coats of anti bacterial and anti fungal property paint of of approved

list of make/ manufacture and approved colour over two coat of water based primer

including preparation of surface by thorough cleaning and wetting and applying one coat of

5.9 putty as per manufacturer’s specification fully to give an even shade before painting and SMT 3,000.00 98.21

curing as per manufacturers specifications and as directed. The item to include all materiral,

scaffolding, labour etc. complete in all respects for all levels,all floor, all height as per

instruction of EIC. (SVP Approved rate)

Providing & applying Spray OR Brush painting (two coats) with white wash of approved brand &

manufacture and of required shade on surfaces to give an even shade over after thoroughly

brushing the surface free from mortar dropping & other foreign matter and also preparing

the surface even and smooth. The item to include all materiral, scaffolding, labour etc.

Complete in all respects for all levels,all floor, all height as per instruction of EIC. (SVP

Sr. no Item Description Unit Quantity Unit Rate Amount

Finishing with Multi surface paint system for interiors and exteriors using Primer as per

manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of

required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer

applied @0.75 ltr/ 10 sqm of approved listof make/ manufacture ,With ready mixed pink or

Grey primer of approved brand and manufacture on wood work (hard and soft wood) all as per

specification and drawings in all levels complete as per the directions of EIC. The item to

include all materiral, scaffolding, labour etc. complete in all respects.

Frame and shutter (SVP Approved rate)

R&B SOR 2024-25, Item Code . 19011,19013 page no.145

Providing and applying 2.5 mm thick marking strips (retroreflective) of specified shade/

colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator

machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile

shoe heater, driven by experienced operator on surface including cost of material, labour

,T&P, cleaning the surface of all dirt, seals, oil, grease and foreign material etc. complete as

per direction of Engineer-in-charge and accordance with applicable

specifications.The item to include all materiral, scaffolding, labour etc. complete in all respects

with all lead, lift etc. (SVP Approved rate)

Providing & applying Wall painting 2 coats with plastic emulsion paint of approved list of make/

manufacture on under coated wall surface to guve an even shade including thoroughly brushing

and other foreign matter and sand papered smooth also applyding two coats acrylic lapy

(putty) & two coats of primer of approved brand and manufacture on wall surface to give an

even shade including thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand paperd smooth finish. The item to include all materiral,

scaffolding, labour etc. complete in all respects for all levels,all floor, all height as per instruction

of EIC. (SVP Approved rate)

Providing & Finishing walls with Acrylic Smooth exterior paint of required shade. from approved

list of make/ manufacture in Two or more coat applied @ 1.67 ltr/ 10 sqm over and including

priming coat of exterior primer applied @ 2.20 kg/ 10 sqm with brush or spray on exterior

sand faced plastered surfaces / mala plastered surfaces at all floors / all heights & all places

5.14 including scaffolding to give even shades including thoroughly brushing the surfaces free from -

mortar dropping and other foreign matter and sand papered smooth etc complete as per

the manufacture's specification & to the satisfaction of Engineer in charge .The rate will also

include the cost of filler for cracks.The item to include all materiral, scaffolding, labour

etc. complete in all respects. (SVP Approved rate)

5.14.a Upto Fourth Floor SMT 3,000.00 69.73

5.14.b Fifth Floor To Eighth Floor SMT 800.00 87.59

5.14.c Ninth Floor To Twelfth Floor SMT 800.00 105.45

5.14.d Thirteenth Floor To Sixteenth Floor SMT 800.00 123.30

5.14.e Seventeenth Floor To Terrace SMT 800.00 141.16

Providing and applying Premium textured exterior with paint of approved list of make/

manufacture of required shade with Two or more coats applied (as per manufacturer's

specification) over and including priming coat of exterior primer applied (as per

manufacturer's specification) at all floors / all heights & all places including scaffolding to

5.15 give even shades including thoroughly brushing the surfaces free from mortar dropping -

and other foreign matter and sand papered smooth etc complete as per the manufacture's

specification & to the satisfaction of Engineer in charge .The rate will also include the cost of

filler for cracks.The item to include all materiral, scaffolding, labour etc. complete in all respects.

(SVP Approved rate)

5.15.a Upto Fourth Floor SMT 150.00 254.10

5.15.b Fifth Floor To Eighth Floor SMT 150.00 271.96

5.15.c Ninth Floor To Twelfth Floor SMT 100.00 289.81

5.15.d Thirteenth Floor To Sixteenth Floor SMT 100.00 307.67

5.15.e Seventeenth Floor To Terrace SMT 100.00 325.53

Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to give an

approved brand and manufacture and of required shape even shade after thoroughly brushing the

surface to remove all dirt and remains of loose powered materials.

R&B SOR 2024-25, Item Code . 18027 page no.142

Painting one coats (excluding priming coat) on previously painted steel and other metal surface

5.17 with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust SMT 400.00 54.35

and other foreign matter.

R&B SOR 2024-25, Item Code . 19003 page no.144

Sr. no Item Description Unit Quantity Unit Rate Amount

5.18 Extra over item 5.19 and 5.17 for every subsequent coat of paint SMT 400.00 50.40

R&B SOR 2024-25, Item Code . 19004 page no.144

Applying priming coat over new steel and other metel surface after and including preparing the

surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes

fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead.

R&B SOR 2024-25, Item Code . 19001 page no.144

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel

paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and

other foreign matter.

R&B SOR 2024-25, Item Code . 19002 page no.144

CEILING WORKS -

Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of

gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other

flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts

of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9

mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at

450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and

mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at

mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing compound

in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer’s specification and also including the cost of making openings for

light fittings, grills, diffusers, trap doors, cutouts made with frame of perimeter channels

suitably fixed, providing additional sections for strengthening the

openings/cutouts,Trapdoors all complete as per drawings, specification and direction of the

Engineer in Charge. Area of cutouts shall not be deducted and no extra payment shall be

considered for additional sections provided . Only plan area shall be considered for payment. All

curved surfaces, recesses, waffles and corbellings shall be part of the false ceiling & flat area in

plan shall be measured for payment. The rates are also inclusive of necessary scaffolding, tools,

tackles etc. Complete for all floors and height with frame wherever required for electrical & A.C.

fixtures & grill all as per drawings, specification and direction of the Engineer in Charge. all as

per manufacturer’s specification and as per drawings, specification and direction of the

Engineer in Charge. Excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I (SVP Approved

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight

calcium silicate false ceiling tiles as per aproved list of makes and approved texture

spintone/ cosmos/Hexa or equivalent of size 595 x 595 mm in true horizontal level,

suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @

grams per sqm including both side) consisting of main 'T' runner suitably spaced at joints

to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet,

spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm

(Minimum) sheet, 1200 mm long spaced between main'T' at 600 mm centre to centre to form a

grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24 x28 mm made of

0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from

grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-

coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of

rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and

5.22 laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / SMT 1,000.00 1,632.63

Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers,

grills,light fittings, fixtures, smoke detectors etc., wherever required. Main 'T' runners to be

suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with

mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level

clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main 'T' , bottom

exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all

floors and heights, as per specifications, drawings and as directed by engineer-in-charge. Note :-

Only calcium silicate false ceiling area will be measured from wall to wall. No deduction

shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The

calcium silicate ceiling tile shall have NRC. value of 0.50(Minimum), light reflection > 85%, non -

combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity<0.043 w/m 0 KC. Rate is including scaffolding for any height & level. (SVP

R&B SOR 2024-25, Item Code . 16006 page no.135

Providing and fixing 12.5mm thk Moisture Resistance Gypsum Tiles false ceiling of size

595x595 mm made of Gypsum plasterboard in true horizontal level suspended on inter

locking 32 metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms /sqm,

both side inclusive)as per IS : 277 consisting of 3600mm long main "T" runner size 24x32mm

and 0.30mm thick, 1200mm long cross "T" of size 24x25mm and 0.30mm thick,

600mmsecondary cross "T" of size 24x25mm and 0.30mm thick and wall angle of size 24x24mm

and 0.4mm thick. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm

thick. Wall angle is fixed along the perimeters of the ceiling to Walls, partitions or columns etc

with rawl plugs and wooden screws at 300mm centers. Main "T" runners are then suspended

from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12 mm dia

and 38mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of

size 85 x 30 x 0.8 mm spaced at max 1200mm center to center along main T, and not more than

150mm from spliced joints. The last hanger at the end of each main runner should not be

greater than 600mm from the adjacent wall. Then 1200mm long cross "T" is interlocked

between the main "T" at 600mm center to center to form a grid of 1200x600 mm and then

secondary cross “T" of length 600mm is then interlocked at middle of the 1200x600mm grid to

form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be

supported independently. Moisture Resistance Gypsum Tiles will be manufactured from

natural gypsum as per IS 2095 part I 2011 placed so as to make the tile a completely sealed unit

is placed in the grid.

Rates will be inclusive of cost of making cut outs/ opening for electrical fixtures, tube

lights /air-conditioners ,grills, diffusers, Trap doors etc & providing additional sections for

strengthening the openings/cutouts,Trapdoors, making grooves between wall & board

Area of cutouts shall not be deducted and no extra payment shall be considered for

additional sections provided . Only plan area shall be considered for payment. All curved

surfaces, recesses, waffles and corbellings shall be part of the false ceiling & flat area in plan

shall be measured for payment. The rate shall be in sqm for all floors and all heights .The rates

are also inclusive of necessary scaffolding, tools, tackles etc. all as per manufacturer’s

specification and as per drawings, specification and direction of the Engineer in Charge.or as per

drawing /instructionof EIC . (SVP Approved rate)

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and fixing PVC plain colour false ceiing with grid type with alu frame consisting of

mm x 600mm 3mm thick plain PVC sheet used as panel insert in a frame work made using

anodized alluminium T section of size 1” x 1” (25 x 25mm, 19 gauge or 1mm thick) in square

pattern of grid sizes of 2 x 2 (600 x 600mm). The alluminium frame work is supported from the

ceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain

proper level etc. The aluminium frame work is supported on side wall with the use of

alluminium L section of size 1 x 1 (25 x 25mm) angles et. Complete as per direction of Engineer

in charge. Manufactures, specification and drawing

R&B SOR 2024-25, Item Code . 10058 page no.106

Providing & Fixing Metal tiles of size 595 X 595 X 0.5 mm thick with 8 mm drop, Tegular Edge

with 0.60 NRC Value “P GRID” ; made of GI sheet having galvanizing of 100 gms/sqm

(both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise

Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness

microns (minimum), including factory painted after bending and perforation, and backed

with a black Glass fiber acoustical fleece.The Main Runner 3.60 MTR Length of Section

X 15 Cross Tee 1.20M of section 24 X 15 MM. The Wall Angle Shall be fixed on PVC

dash Fastners on the Perimeter of the wall by Steel screws with distance of 1 Feet apart Where

main Runner 3.60 M Shall be Parallel to Width & Perpendicular to Length Shall be Placed dully

Inter-Connected. The Distance Between two main runners to be maintained at 1.2M. The Cross

Tee 1.2 M will be Inserted in the Pre-Cut Slots of Main Runner on Regular Interval of 600M to

Form a modular Grid of 1.20 X 600 M . Additional Cross Tee of 600 MM Shall Be Placed Parallel

to Length to Form a Grid of 600 MM X 600 MM. E-Grid of Module size 600 Mm X 600MM Shall

be Supported By 4/6 MM Dia G.I.Wire from the Purlins/ Soffit.etc. The item to include all

materiral, scaffolding, labour etc for all floors and height. complete in all respects as per the

directions of EIC. (SVP Approved rate)

Providing and fixing PVC Printed pain colour false ceiling with grid type with alluminium frame

consisting of 600mm x 600mm 3mm thick plain PVC sheet used as panel insert in a frame work

made using anodized alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in

square pattern of grid sizes of 2 x 2 (600 x 600mm) The alluminium frame work is supported

from the cceiling with the help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to

maintain proper level etc. The aluminium frame work is supported on side wall with the use of

alluminium L section of size 1 x 1 (25 x 25mm) angles etc.complete as per direction of Engineer

in charge. Manufactures specification and drawing.

R&B SOR 2024-25, Item Code . 10059 page no.107

SUB TOTAL PART V

PART -VI WATER PROOFING WORKS -

Providing and laying water proofing treatment in WCs, bathroom etc., by applying cement

slurry mixed with water proofing cement compound consisting of applying : a) First layer of

slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @

kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of

cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This

layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate

includes preparation of surface, treatment and sealing of all joints, corners, junctions of

pipes and masonry with polymer mixed slurry. The item to include all materiral, scaffolding,

labour etc. complete in all respects as per the directions of EIC. (Minimum gurantee for water

proofing shall be 10 years. ) (SVP Approved rate)

Location : All floors Toilets -

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of

following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement

admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-

Charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the

surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats/

autoclave aerated concrete block bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1

cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in- Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement

: 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and

approved by Engineerin- Charge to required slope and treating similarly the adjoining walls

6.1 upto 300 mm height including rounding of junctions of walls and slabs c) After two days of SMT 150.00 788.04

proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement

admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-

Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :

4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and

approved by Engineer-in- Charge including laying glass fibre cloth of approved quality in

top layer of plaster and finally finishing the surface with trowel with neat cement slurry

and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished

shall be flooded with water for a minimum period of two weeks for curing and for final test. All

above operations to be done in order and as directed and specified by the Engineer-in-Charge.

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.(Minimum

gurantee for water proofing shall be 10 years.) (SVP Approved rate)

Finishing wall with water proofing cement paint of on wall surfaces (Two coats) to give an

approved brand and manufacture and of required shape even shade after thoroughly brushing

the surface to remove all dirt and remains of loose powered materials with subsequent coat of

water proofing cement paint of approved brand and manufacture.

R&B SOR 2024-25, Item Code . 18027,18028 page no.142

SUB TOTAL PART VI

PART -VII MISCELLANEOUS FINISHES WORKS -

Providing & fixing cement concrete 1:2:4 for encasing for rolled steel section in grillages with (1

cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size), including

7.1 centering and shuttering but excluding cost of expanded metal and hangers.The item to CMT 2.00 4,854.20

include all materiral, scaffolding, labour etc. complete in all respects all floors and height as

directed by EIC. (SVP Approved rate)

Extra for providing and fixing expanded metal mesh of size 20x60 mm and strands 3.25 mm

wide 1.6 mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams,

7.2 columns and grillages,excluding cost of hangers.The item to include all materiral, scaffolding, SMT 5.00 338.44

labour etc. complete in all respects for all floors and height as directed by EIC. (SVP Approved

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing and fixing gypsum partition upto ceiling height (upto 4.5 meter) consisting of

G.I. frame and required board, including providing and fixing of frame work made of special

section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side

inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and

0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash

astener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with

nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and

0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing

of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends

of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at

spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm

long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to

centre. The boards are to be fixed to the frame work with joints staggered to avoid through

cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to

be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat

head screws, including jointing and finishing to a flush finish with recommended jointing

compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and

two coats of primer suitable for board as per manufacture's specification and direction of

engineer in charge all complete at all floors and height. 75 mm overall thickness partition with

12.5 mm thick double skin fire rated board conforming to IS: 2095: part

I. The item to include all materiral, scaffolding, labour etc. complete in all respects. (SVP

Providing and Fixing 12 mm thick moisture & fire resistant heavy duty Cement Fibre Board (High

pressure steam cured) Confirming to ISO 4862-2000 in wall panels of one face of cold formed

galvanised light gauge steel frame structure to form wall / partition as & Where directed by

Engineer-in- Charge

R&B SOR 2024-25, Item Code . 22020 page no.169

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size

75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate

width with chase cutter and embedding the stone in the chase with epoxy grout or with cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) at all

floors and height as per direction of Engineer-in-charge and finished smooth. The item to

include all materiral, scaffolding, labour etc. complete in all respects. (SVP Approved rate)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved list

of make /manufacture, including providing and fixing top & bottom pivot & spring type fixing

arrangement and making necessary holes etc. for fixing required door fittings, all complete as

per direction of Engineer-in-charge(Door handle, lock and stopper etc.to be paid separately).

The item to include all materiral, scaffolding, labour etc. complete in all respects at all floors and

height. (SVP Approved rate)

Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and

7.6 W.C. doors) using synthetic rubber based adhesive. The item to include all materiral, SMT 5.00 659.73

scaffolding, labour etc. complete in all respects as per directions of EIC. (SVP Approved rate)

Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x

mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The

glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at

7.7 the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation at SMT 5.00 1,416.70

all floor and height, material and required pattern approved by Engineer-in-Charge. The

item include all material, scaffolding, labour etc. complete in all respects. (SVP Approved

STRUCTURAL STEEL AND METAL WORK -

SUB TOTAL PART VII

PART - VIII PHE WORKS

I SANITARY FIXTURES

WATER CLOSET (wall hung, 'P' trap): Providing and fixing snow white glazed, wall hung

European WC, CERA make, Cruse model 'P' trap (Catalogue No. 2058) with seat

1 cover(Catalogue No. 2328), outlet gasket (Catalogue No. 2433) and inlet gasket(Catalogue No. Nos. 5.00 4,075.00

2533).Complete in all respect at all floors and height with all allied and necessary

accessories as directed by EIC, hardware excluding chair bracket. (SVP Approved rate)

Sr. no Item Description Unit Quantity Unit Rate Amount

WATER CLOSET (wall hung, 'P' trap): Providing and fixing STAINLESS STEEL (AISI-304), wall

hung WC, Make: Bluma (Nirali or equivelent) size: 380x355x550mm with coupling.

1.1 Complete in all respect with all allied and necessary accessories, hardware, fixtures and Nos. 5.00 29,548.21

fittings, ready for use installation .etc. at all floors and height with all allied and necessary

accessories as directed by EIC.(FOR GENERAL TOILETS ) (SVP Approved rate)

CHAIR BRACKET (for wall hung W.C.): Providing & fixing chair bracket and rag and

necessary accessories, hardware, fixtures and fittings for Wall-mounted wc. Complete in all

respect at all floors and height as directed by EIC. CERA Catalogue No. 2438 (SVP

METROPOLE FLUSH VALVE (32mm for regular application): Metropole flush valve, dual

1.3 flow(concealed body) with control cock operation plate 32mm size. Complete in all respect Nos. 5.00 2,053.57

at all floors and height as directed by EIC. (Jaguar, Catalogue no. 1085) (SVP Approved rate)

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. (SVP

HEALTH FAUCET: Hand shower (health faucet) 1M PVC tube with wall hook, Jaguar,

chrome finish (CP). Catalogue number 573. Complete in all respect at all floors andheight with

all allied and necessary accessories, hardware, fixtures and fittings , ready for use installation.

(SVP Approved rate)

Supplying and fixing White Vitreous china circular wash basin CERA category No.

group I, size 470 mm. dia with CP brass pillar tap, 32 mm. rubber plug and CP brass chain,

mm. CP brass waste of standard pattern connected with GI waste pipe upto floor level

and 32 mm. dia CP brass trap and unions complete including cutting and making good the

walls etc. at all floors and height as instructions of EIC. as a complete job. (For Staff & doctors

toilets) (SVP Approved rate)

Supplying and fixing STAINLESS STEEL (AISI-304), circular wash basin Make: Globus deep

4 (Nirali or Equivalent) size:450x380x160mm with coupling. (PUBLIC TOILET, WARD Nos. 10.00 3,059.82

TOILET,PATIENT TOILET,D.U.,BLOOD BANK TOILET, & LAB TOILET) (SVP Approved rate)

Providing and fixing C.P brass waste for wash basin or sink (B) 40 mm diameters. (SVP

Providing and fixing M.1 fisher union for wash basin or sink (B) 40 mm diameter. (SVP Approved

One 15mm CP brass quarter turn type basin mixer with two nos of 15mm CP brass

4.3 quarter turn type angle stop cocks with ceramic disc cartridge of approved list of make/ Nos. 15.00 3,765.18

Manufcturer. (SVP Approved rate)

Providing and fixing chrome plated bottle trap with necessary coupling of approved list of

make/ Manufcturer for wash basin. (SVP Approved rate)

Glazed vitreous china ware under counter wash hand basin of approved make of size

560x450mm .The gap between the counter and the top of the basin shall in no case exceed

5 5mm, silicone sealant shall be applied to the top of the basin before fixing in position so as to Nos. 15.00 1,077.68

completely seal the gap. The excess sealant shall be wiped out using a clean blade flush with

the basin inner profile.(For paid bed toilets only) (SVP Approved rate)

Glazed vitreous china ware counter top wash hand basin of approved list of

6 make/manufacturer of size (diameter) 420mm as per drawing/ directed by EIC. (For Nos. 5.00 2,034.82

Consultant rooms only) (SVP Approved rate)

Providing and fixng pillar ,tap, capstan head, screw down high pressure with screws, shanks

and back nuts (I) 15mm. (SVP Approved rate)

Providing and fixing Coat hook "J" type two way (C.P.Brass). (For all OP Rooms) (SVP

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with

8 minimum distances of 37 mm from wall face with concealed fittings arrangement of Nos. 25.00 195.09

approved quality and colour,weighing not less than 88 gms. (SVP Approved rate)

Providing and fixing C.P brass towel rail Complete with C.P brass bracket fixed to wooden plugS

with C.P brass screws. (B) 600 mm x 20 mm size.asdirected by EIC. (SVP Approved rate)

Providing and fixing STAINLESS STEEL (AISI-304), urinal Make: Cleo (Nirali or Equivalent)

size:610x460x215mm with coupling. Water inlet from back side, including fixing to wall with

suitable brackets all as per manufacturers specification and direction of Engineer-in-

charge.(Ground & First Floor Toilets) (SVP Approved rate)

Concealed Sensor for URINALS with installation box &control cock,CP Dome and all

10.1 accessories completed as direction of Engineer-in-charge. Male:Jaguar or Equivalent Nos. 20.00 10,292.86

(Model:SNR-STL-51083) (SVP Approved rate)

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved list of

make conforming to IS:8931. (SVP Approved rate)

Sr. no Item Description Unit Quantity Unit Rate Amount

a) 15mm nominal bore -

URINAL (compact): Providing and fixing flat back snow white glazed urinal, 693 x 333 x 267mm

11 CERA make, Catalogue no. 5013.Complete in all respect with all allied and necessary Nos. 10.00 785.71

accessories, hardware, fixtures and fittings, ready for use installation. (SVP Approved rate)

a) 15mm nominal bore -

Supply & Fixing of 20mm thick Granite Urinal Division Plates of

12 1200mmx600mm size with wall cutting and making good completed as per instruction of Nos. 30.00 1,666.96

EIC. (SVP Approved rate)

Supplying and fixing brass chromium plated (Two in one) type wall mixer Sinlge lever hot and

cold water mixer having either fixed type over head shower or telephonic shower as approved

by engineer in charge including all components like adjustable legs,wall flange,rigid tube or

flexible pipe etc,complete. (SVP Approved rate)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to

14 relevant IS standards and weighing not less than 810 gms.(To be located for cold & hot water in Nos. 20.00 711.34

ward room toilets and CU ,DU areas). (SVP Approved rate)

a) 15mm nominal bore -

Providing and Fixing kitchen sink with M.S or C.I brackets painted' with including cutting

15 holes and making good the same but excluding the fittings. (A) 'Vitreous China (11) Flat back' Nos. 2.00 2,034.82

washbasin 600 mm x 450 mm x 150 min size. (SVP Approved rate)

Providing and fixing C.P brass waste for wash basin or sink (B) 40 mm diameters. (SVP

Providing and fixing M.1 fisher union for wash basin or sink (B) 40 mm diameter. (SVP Approved

Providing and fixing Swan neck pillar tap (C.P.Brass) 15 mm dia. with swinging spout

having approx. wt. 1000 gms (SVP Approved rate)

Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height

16 of 75mm with concealed fitting arrangements,weighing not less than 106 gms.(Near the Nos. 5.00 147.28

Shower & wash basin) (SVP Approved rate)

Grab bar -Supplying & fixing floor - wall mounted safety armrest for handicapped,

made of stainless steel profiled tube with multi-functional, ergonomic grip area, antislip

profile, diameter 32 mm with one 90 deg. & one 180 deg.and two extruded fastening flanges

with two holes each,made of stainless steel 8 mm diameter, 3 mm thick, with plastic

collar, including fastening set. Execution selectable right-hand or left-hand. (SVP Approved

GRAB BAR: Grab Bar 450mm, Jaguar Hotelier series, chrome finish (CP). Catalogue number

1503 (SVP Approved rate)

Providing and fixing white vitreous china laboratory sink with C.I.brackets, C.P. brass chain with

rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass

unions complete,Including painting of fittings and brackets, cutting and making good the wall

wherever required : (SVP Approved rate)

Size : 450x300x150 mm -

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to

IS standards and weighing not less than 810 gms. (SVP Approved rate)

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm

distance from wall of standard shape with bracket of the same materials with snap

fittings of approved quality and colour, weighing not less than 105 gms. (SVP Approved

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make

conforming to IS:8931. (SVP Approved rate)

a) 15mm nominal bore -

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931 a) 15 mm nominal bore (SVP Approved rate)

PART - II WATER SUPPLY SYSTEM -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) (SCH-40) pipes as per approved

makes list ,having thermal stability for hot & cold water supply, including all CPVC plain &

brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as

per direction of Engineer in Charge. Concealed work, including cutting chases and making good

the walls etc. (SVP Approved rate)

a) 15mm nominal outer dia Pipes RMT 20.00 241.07

Sr. no Item Description Unit Quantity Unit Rate Amount

b) 20 mm nominal outer dia Pipes RMT 20.00 264.29

c) 25mm nominal outer dia Pipes RMT 20.00 313.39

d) 32mm nominal outer dia Pipes RMT 20.00 376.79

e) 40mm nominal outer dia Pipes RMT 20.00 401.79

f) 50mm nominal outer dia Pipes RMT 20.00 491.07

Providing, laying, jointing, fixing, testing, painting, commissioning GI heavy quality type(C-

Class) pipe of approved list of make/ manufacturer conforming to IS:1239, including cost of GI

specials, cutting the pipes to the required lengths, threading, jointing the pipes,

chasing,making holes necessary in walls & floors, clamping to walls / supports using

fabricated MS brackets of approved design with GI threaded U clamps &Union, coupling,

elbow etc. restoring the walls & floors to the original conditions etc., complete all as specified

and directed. The exposed pipes shall be painted with 2 coats of approved synthetic enamel

paint over a coat of metal primer, marking the flow indications including making the

necessary co lour bands as specified in the tech.spects/ as per directions of EIC. (Pipes for

basement ring main,vertical risers ,OHT filling,drain pumping.etc) (SVP Approved rate)

The entire piping system in part or as a whole has to be tested to a hydraulic test pressure of

kg/sq.cm for a period of not less than 24 hours. the piping shall be concealed / commissioned -

only after satisfactory testing of the system. (SVP Approved rate)

a) 20mm nominal dia Pipes RMT. 8.00 215.18

b) 25 mm nominal dia Pipes RMT. 8.00 308.04

c) 32mm nominal dia Pipes RMT. 8.00 397.32

d) 40mm nominal dia Pipes RMT. 8.00 470.54

e) 50 mm nominal dia Pipes RMT. 8.00 638.39

f) 65 mm nominal dia Pipes RMT. 8.00 820.54

g) 80 mm nominal dia Pipes RMT. 8.00 1,011.61

h) 160 mm nominal dia Pipes RMT. 8.00 2,158.93

Supply ,fixing of 8mm thick GI threaded U clamps of required length for fixing on the MS

brackets for water suppy pipesetc. As per instructions of EIC. (SVP Approved rate)

Supplying ,fabricating and fixing M.S. (E250 Grade) Flat angle iron pipe clamps

,stays,etc.including drilling holes,welding(if any) including nuts,bolts etc.including all lifts for

all floor, all height, all leads and required scaffolding if any. As directed by EIC. (SVP

Supply & fixing of heavy quality Ball valves shall have body of carbon steel as per approved list

of make/ Manufcturer. The ball and the shaft shall be of stainless steel. The seat shall

be of PTFE. The valve shall be complete with socket weld ends and the float of copper

sheet. The minimum thickness of copper sheet used for making the float shall be 0.45mm

3 for a float exceeding 115mm dia. The body of the high pressure ball valve when assembled in -

working condition with the float immersed to not more than half of its diameter shall

remain closed against a test pressure of 3.5kg/sqcm.of following sizes, conforming to

IS:1703: 1977,PN 1.0 and bearing ISI mark, including testing, making good the leakages etc.,

complete as per instructions of EIC. (SVP Approved rate)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic

floats complete : (SVP Approved rate)

a) 20 mm nominal bore Nos. 5.00 365.98

b) 25 mm nominal bore Nos. 5.00 401.74

Providing & fixing butterfly valve as per approved list of make/manufacturer (Body : Grey

Cast Iron, Shaft: SS, Disc : SG Iron (Rilson coated), Liner: HT - EPDM (upto 150mm dia

4 with hand lever operation & above with gear box operation). Tested to a pressure not -

less than 16Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting

complete as required/as per direction of EIC. (SVP Approved rate)

Supply,Laying of 50mm (28 Gauge) thick Rock Wool insulation with mechanical

protection, GI wire mesh( 14 Gx3/4”) and Aluminium (28 Gauge) cladding as per direction

of EIC.(All Terrace ,Vertical Down Takes & internal toilet Hot Water Pipes) . (SVP Approved

a) 20MM Dia. RMT. 5.00 169.64

b) 25MM Dia. RMT. 5.00 205.36

c) 32MM Dia. RMT. 5.00 250.00

Sr. no Item Description Unit Quantity Unit Rate Amount

d) 40MM Dia. RMT. 5.00 285.71

e) 50MM Dia. RMT. 5.00 357.14

f) 65MM Dia. RMT. 5.00 401.79

g) 80MM Dia. RMT. 5.00 491.07

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber

6 insertions etc. complete (The tail pieces tapers etc if required will be paid separately) : (SVP -

Providing & fixing butterfly valve as per approved make list / Manufacturer (Body : Grey

Cast Iron, Shaft: SS, Disc : SG Iron (Rilson coated), Liner: HT - EPDM) (50mm dia with hand

7.0 lever operation & above with gear box operation). Tested to a pressure not less than Nos. 5.00 2,521.43

10Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as

required. (SVP Approved rate)

8 Providing and fixing gun metal non- return valve of approved quality (screwed end) : -

a) 32mm nominal bore Nos. 10.00 494.02

b) 40mm nominal bore Nos. 10.00 610.49

c) 65mm nominal bore Nos. 10.00 1,580.00

Providing and fixing of following mentioned dia dial pressure gauge to read up to 15kg/sq.cm,

9 to be fixed on delivery main of pump sets with isolation cock. Fixing As direction of EIC. -

(SVP Approved rate)

a) 25mm dia. Nos. 20.00 477.68

Construction of P.C.C/ Brick Masonry pedestals 600mmx300mmx150mm with MS brackets &

10 GI clamps for laying pipes on terrace for solar piping as per drawing and direction of EIC. Nos. 10.00 2,187.50

(SVP Approved rate)

Supplying & fixing of 20 mm dia. hose bib with ball valve of 20 mm dia. (For external gardening)

as per drawing and direction of EIC. (SVP Approved rate)

Providing and firing C.I manhole cover 0.60 mt x 0.45 mt size having weight not less than

Kg:(For All Sumps & OHTs)

R&B Sor-2024-25, Item code. 23038, page no.179

a) Providing and fixing PPP Water hammer arrestors complete with necessary fittings for inlet

dia of 20mm. as per drawing and direction of EIC. (SVP Approved rate)

b) Providing and fixing 20mm dia. ball valve (brass) of approved quality, High or low pressure,

with plastic floats complete : (SVP Approved rate)

Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum

cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm

with minimum 112 mm space between protruded legs having 2 mm tread on top surface by

ribbing or chequering besides necessary and adequate anchoring projections on tail length on

138 mm as per standard drawing and suitable to with stand the bend test and

chemical resistance test as per specifications and having manufacture's permanent

identification mark to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design. (SVP Approved rate)

Supplying, installing, testing and Commissioning of approved list of

make/manufacturer PN 16 Brass pressure reducing station (PRS) with union, ball valve /

butterfly valve 3 nos of required dia, pressure gauge 2 nos with all necessary accessories etc.

complete all conforming to relevant IS Codes. (SVP Approved rate)

Supply ,installation ,testing & commissioning of Electrically operated Solenoid valve (as per

approved list of make/ manufcturer) to be mounted on the over head tank incoming line

with power supply 220V/24V/50 Hz unit of suitable for following diameter pipe lines with

3Core x 2.5 Sqm armoured copper cable of length 80 mtrs , from Over Head Tank to

Under Ground Sump & required accessories complete as per drawing / instruction of EIC. (SVP

Supplying and jointing-in-position cast iron flanged end foot valve with strainer (of cast

17 iron/galvanized iron) swing type tested to withstand a pressure of 2 Kgs/cm2 complete in -

all respects, conforming to I.S.4038 (SVP Approved rate)

a) 50 mm size Nos. 5.00 2,952.68

b) 65 mm size Nos. 5.00 6,302.68

Sr. no Item Description Unit Quantity Unit Rate Amount

IV INTERNAL & EXTERNAL SANITARY PIPING SYSTEM -

Supply,fixing of 175mm deep P traps of self cleansing design with following mentioned

outlet diameter of approved make, including making connection with PVC soil/waste pipes

using rubber gaskets etc., complete all as specified in drawing & directed by EIC. (SVP

Providing and fixing C P Brass :Grating 150 mm. nominal size square ,18 mm high grating dome

shape having Total wt. not less than 110 gms (SVP Approved rate)

P&F 127mm dia C.P. steel Jali cockroach trap (CCTR-127) for gully floor or Nahani trapwith

100 mm dia. of the inner hinged round (SVP Approved rate)

Supply,fixing of 110mm Dia.x 75mm dia.(Bell mouth P-trap) of self cleansing design with

following mentioned outlet diameter of approved make, including making connection

with PVC soil/waste pipes using rubber gaskets etc., complete all as specified in drawing

& directed by EIC. (SVP Approved rate)

Providing and fixing C P brass grating with openable lid : Grating 100 mm nominal dia.

and 12 mm. high domed shape having wt. not less than 25 gms (SVP Approved rate)

P&F 127mm dia C.P. steel Jali cockroach trap (CCTR-127) for gully floor or Nahani trapwith

100 mm dia. of the inner hinged round (SVP Approved rate)

Supply,laying of under floor UPVC drainage pipes, specials of approved list of

make/Manufcturer conforming to to IS:13592 Type 'B' (8 kg/sq.cm.) using lubricant as per

manufacturer's specification, including cutting the pipes square to the required lengths,

including with required FRP sealant as a jointing Material,necessary wall cutting, chasing

& restoring to the original condition, testing for water tightness etc. (Specials at junctions of

3 lateral pipe must have access doors for inspection).The formation of pipe sockets by heating -

the pipe shall not be permitted the joints for plain ended pipes shall be made using

couplers if necessary. Rate shall also include the cost of GI 'U' clamps of 12/16mm thick

to be provided at not more than 1.5m c/c for horizontal ceiling suspended pipes.

(Concealed & Ceiling Suspended Piping) . At all floors and height complete all as specified in

drawing & directed by EIC. (SVP Approved rate)

3A 40mm Dia. RMT. 45.00 159.82

3B 75mm Dia. RMT. 45.00 202.68

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type 'B') conforming to

IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of

4 PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm RMT. 20.00 846.43

center to center or shall be concealed in walls as directed including necessary fittings such

as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials. At all floors and height complete all as specified in

drawing & directed by EIC. (SVP Approved rate)

Supply ,fixing of 10mm thick GI threaded U clamps fixing on the MS brackets for water suppy

pipesetc. (SVP Approved rate)

Supplying ,fabricating and fixing M.S. (E250 grade) Flat angle iron pipe clamps

4.1.2 ,stays,etc.including drilling holes,welding(if any) including nuts,bolts etc.including all lifts. (SVP Kg 60.00 65.18

Providing, laying and jointing in true line and level.110 diametre U.P.V.C (Type 'B') conforming

to IS .13592-1992 with one end Main and other _end socketed with rubber ring,. & fittings

conforming to IS 14735 -1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed with help of following

mentioned GI Treaded U clamps at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such 'as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of all materials. At all

floors and height complete all as specified in drawing & directed by EIC. (SVP Approved rate)

Supply ,fixing of 8mm thick GI threaded U clamps fixing on the MS brackets for water suppy

pipes of any dia. etc. (SVP Approved rate)

Supplying ,fabricating and fixing M.S. (E250 Grade) Flat angle iron pipe clamps

4.2.2 ,stays,etc.including drilling holes,welding(if any) including nuts,bolts etc.as per drawing/ Kg 60.00 65.18

directed by EIC. (SVP Approved rate)

5 Providing and fixing in position cowl vent to pipes (SVP Approved rate) -

B) 75 mm diameter Nos. 10.00 384.82

Sr. no Item Description Unit Quantity Unit Rate Amount

C) 110 mm diameter Nos. 10.00 521.43

Providing & fixing of Jubilee clip for the saddles both sides of the waste water header pipe

connection to the wash basin to avoid the leakage. (SVP Approved rate)

a) 110mm Dia. Nos. - 142.86 -

P.V.C. PIPES : Providing & fixing rigid P.V.C. pipes, Prince/Supreme/ Astral make (10

kg/cm2) with necessary SWR fittings, coupler, bends, tees and fixed to walls/ columns with

PVC clamps with standard fittings joints to be filled with approved solution and finished

with 10 mm fillet of epoxy putty. The rate shall also include providing and fixing suitable

adopter at the junction of PVC vertical pipe and CI horizontal pipe at slab level. Complete in all

respect with all allied and necessary accessories, hardware, fixtures and fittings, ready

for use installation. At all floors and height, complete all as specified in drawing &

directed by EIC.(Basement ceiling suspended header pipes) (SVP Approved rate)

i) 160MM DIA. RMT 10.00 846.43

ii)300MM DIA. RMT 10.00 1,509.82

P/F. To Wall Ceiling And Floor 10.0 Kgf/Cm2 Working Pressure Pvc Pipes Of The Following

7.1 Outside Dia Complete With Special Flange Type Fittings,Wall Clamps Incl. All Necessary

Fittings Etc. Complete. (At Any Floor Level) (R&B SOR 2023-24, I.C NO-23004C TO 23004G )

32 mm ddia RMT 10.00 116.40

40 mm dia RMT 10.00 124.43

50 mm dia RMT 10.00 165.38

75 mm dia RMT 10.00 274.68

Providing weep hole for raised floor toilet area with 40mm pipe for draining moisture,

including making necessary holes in the sunk slab, placing pipe sleeve in position, grouting the

opening in CM 1:2 etc., at all floor and height. complete all as specified in drawing & directed by

EIC. (SVP Approved rate)

Providing and fixing cleaning eye on horizontal UPVC soil & waste pipes, to the satisfaction of

the Project Manager / Consultants as per approved design. (SVP Approved rate)

a) 75 mm dia Nos. 5.00 175.89

b) 110 mm dia Nos. 5.00 301.79

Drilling with core cutting machine in RCC floor slab etc., for laying pipes and rendering the

same in RCC 1:2:4, finishing the same to the satisfaction of the owner or his authorized

10 representative etc., including nominal reinforcement wherever required, . The quoted rate -

shall also include for providing EPOXY based water proofing compound for sealing the

joints around the pipes as approved by site incharge. (SVP Approved rate)

a) 110mm dia. Nos. 1.00 491.07

b) 160mm dia. Nos. 1.00 669.64

c) 65mm dia. Nos. 1.00 312.50

Constructing grease trap 150x120x160cm (inside) with one brick thick brick masonry wall

with inlet and outlet drain with bricks of class designation 7.5 in cement mortar 1:4

(1cement: 4fine sand) plastered 12mm thick with 1:4 (1cement: 4coarse sand) finished

with a floating coat of neat cement on inside and exposed surfaces having two stone/ R C

Concrete baffled walls 34.5cm deep and third one 19cm deep,each 40mm thick and 45cm long

11 embedded 2.5cm on either side in brick masonry, 40mm thick 100x60cm stone/ R C C -

cover and 7.5cm thick bed concrete 1:5:10 (1cement: 5fine sand: 10graded stone

aggregate 40mm nominal size) with 40mm flooring in cement concrete 1:2:4 (1cement:

2coarse sand:4graded stone aggregate 12.5mm nominal size) with a floating coat of neat

cement including all earth excavation, refilling and disposal of surplus earth complete as

per standard design// directed by EIC. (SVP Approved rate)

a) With F.P.S. bricks Nos. 1.00 45,982.14

Sr. no Item Description Unit Quantity Unit Rate Amount

Constructing brick masonry chamber for under ground C.I inspection chamber and bends

with bricks having crushing strength not less than 35 kg/sqcm in C.M 1:5 C.I cover with frame

(Light duty) 455mmx610mm.internal dimesion,total weight of cover with frame to be not less

than 38 kg(Weight of cover 23 kg and weight of frame 15 kgs) R.C.C top slab with 1:2:4 mix(

12 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete Nos. 1.00 2,597.32

1:5:10 inside plaster 15mm.thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc.complete. (III) Inside dimensions 600mm

x 850mm & 450 mm deep for pipe lines with three or more inlets.(For medical waste line ) as

per drawing / directed by EIC. (SVP Approved rate)

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar

13 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with -

frame complete as per standard design/directed by EIC : (SVP Approved rate)

a With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (SVP Approved rate) Nos. 1.00 3,533.93

Constructing man hole with R.C.C top slab in 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) foundation concrete 1:3:6 mix(1 cement : 3 coarse sand : 6 brick

bats 40 to 50mm nominal size) inside plastering 15mm thick with cement mortar 1:5(1

cement : 5 coarse sand) finished with a floating coat of neat cement slurry and making

channels in cement concrete 1:2:4 mix(1 cement : 2 coarse sand : 4 stone aggregate

14 20mm nominal size) finished smooth complete including curing & testing (I) Inside Nos. 1.00 78,571.43

size 1000mmx1400mm and 3500 meter deep including C.I cover with frame size

600x600mm total weight of cover and frame to be not less than 128 kgs(Weight of cover 64 kgs

& weight of frame 64 kgs) (A) with 230mm thick walls of brick masonry using bricks having

crushing strength not less than 35 kg/sqcm in cement mortar 1:5 ( 1 cement : 5 coarse sand)

as per standard design / directed by EIC.

Providing M.S. foot rests including fixing in manholes with 20x20x10cm cement concrete blocks

14.1 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard -

design / directed by EIC. (SVP Approved rate)

a) With 20x20 mm square bar Nos. 5.00 246.43

Constructing man hole with R.C.C top slab in 1:2:4 mix(1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) foundation concrete 1:3:6 mix(1 cement : 3 coarse sand : 6 brick

bats 40 to 50mm nominal size) inside plastering 15mm thick with cement mortar 1:5(1

cement : 5 coarse sand) finished with a floating coat of neat cement slurry and making

channels in cement concrete 1:2:4 mix(1 cement : 2 coarse sand : 4 stone aggregate

15 20mm nominal size) finished smooth complete including curing & testing (I) Inside Nos. 1.00 86,160.71

size 1000mmx1400mm and 4000 meter deep including C.I cover with frame size

600x600mm total weight of cover and frame to be not less than 128 kgs(Weight of cover 64 kgs

& weight of frame 64 kgs) (A) with 230mm thick walls of brick masonry using bricks having

crushing strength not less than 35 kg/sqcm in cement mortar 1:5 ( 1 cement : 5 coarse sand)

(SVP Approved rate)

Providing M.S. foot rests including fixing in manholes with 20x20x10cm cement concrete blocks

15.1 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard -

design / directed by EIC. : (SVP Approved rate)

a) With 20x20 mm square bar Nos. 10.00 246.43

Earthwork excavation for pipeline trenches of required width, including excavation for

sockets, dressing of sides, watering & ramming of bottom, barricading, danger lighting,

shoring and strutting as required, including getting out the excavated earth, back filling with

approved available earth in layers of 15cm, consolidating each deposited layers by

watering, ramming etc., and disposing of surplus excavated earth including all lead and lift as

directed. Up to 2.0m depth as per standard design / directed by EIC. : (SVP Approved rate)

Providing and laying (To level or slopes) and jointing reinforced concrete light duty Non

pressure pipes IS Class NP3 of the following internal diameter with collars and butt ends

prepared for collar joints in cement mortar 1:1 including testing of joints complete as per

standard design / directed by EIC. : (SVP Approved rate)

a) 200mm dia. RMT 5.00 773.21

V RAIN WATER DISPOSAL SYSTEM -

Sr. no Item Description Unit Quantity Unit Rate Amount

Providing, laying and jointing in true line and level. 160 diametre UPVC (Type 'B') conforming

to IS .13592-1992 with one end Main and other end socketed with rubber ring,. & fittings

conforming to IS 14735 -1999 of approved list of make/manufcturer for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

with help of following mentioned GI Treaded U clamps at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings such 'as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement including

cost of all materials. (SVP Approved rate)

Supply ,fixing of 10mm thick GI threaded U clamps fixing on the MS brackets for water suppy

pipesetc. as per standard design / directed by EIC. (SVP Approved rate)

Supplying ,fabricating and fixing M.S. (E250 Grade) Flat angle iron pipe clamps

,stays,etc.including drilling holes,welding(if any) including nuts,bolts etc.including all lifts

including all lifts for all floor, all height, all leads and required scaffolding if any. As directed by

EIC. (SVP Approved rate)

Earthwork excavation for pipeline trenches of required width, including excavation for

sockets, dressing of sides, watering & ramming of bottom, barricading, danger lighting,

shoring and strutting as required, including getting out the excavated earth, back filling with

approved available earth in layers of 15cm, consolidating each deposited layers by

watering, ramming etc., and disposing of surplus excavated earth including all lead and lift as

directed by EIC. (SVP Approved rate)

a) Up to 2.0m depth & 1.0m width below ground level. -

Constructing brick masonry chamber for under ground C.I inspection chamber and bends

with bricks having crushing strength not less than 35 kg/sqcm in C.M 1:5 C.I cover with frame

(Light duty) 455mmx610mm.internal dimesion,total weight of cover with frame to be not less

than 38 kg(Weight of cover 23 kg and weight of frame 15 kgs) R.C.C top slab with 1:2:4 mix(

3 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete Nos. 5.00 7,588.39

1:5:10 inside plaster 15mm.thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc.complete. (III) Inside dimensions 600mm

x 850mm & 450 mm deep for pipe lines with three or more inlets.(For medical waste line ) (SVP

SUB TOTAL PART PHE

PART -X MISCELLANEOUS ITEMS

Providing and Laying 8mm thick Pergo/Armstrong or equilant Laminated Wooden flooring on

top of foam layer (of grade AC 5) over a base of Cement Flooring including all accessories,

material & labour complete as directed by Engineer - in - charge. size : 32.25 x 7.75 mtr (SVP

Providing & Laying 8mm Thick Pergo/Armstrong or equilant Laminated Wooden DADO on top of

12mm thick water proof ply wood by using foam layer of grade AC 5 over base of Cement

2 Flooring including all assesories, material, & labour complete as directed by Engineer-in-charge. SMT 5.00 3,175.89

Size : 32.25 x 7.75 Mtr (SVP Approved rate)

3 Orbita Lock for Windows (SVP Approved rate) NOS. 5.00 336.92

4 Roller For Windows (SVP Approved rate) NOS. 5.00 88.32

5 Aldrop as approved by EIC (SVP Approved rate) NOS. 71.00 491.07

6 Tadi as approved by EIC (SVP Approved rate) NOS. 50.00 223.21

Extra Cement for M30 Grade of concrete (With Fly Ash), Over Civil Finishes BOQ Item (1.4) of

M25 Grade of Concrete (With Fly Ash) (SVP Approved rate)

Multipurpose Cement Board reinforced with Cellulose Fiber - Shera Make (SVP Approved rate)

FISCHER 585 S (SVP Approved rate)

Providing & fastening Rebar 12mm dia Nos. 5.00 132.42

FISCHER 360 S (SVP Approved rate)

Providing & fastening Rebar 8mm dia Nos. 5.00 46.06

Providing & fastening Rebar 10mm dia Nos. 5.00 54.13

Providing & fastening Rebar 12mm dia Nos. 5.00 74.84

FRICTION HINGES (SVP Approved rate)

10 Material Supply PAIR 1,851.60

TOP PIVOT FOR ALUMINIUM DOOR (SVP Approved rate)

11 Material Supply NOS. 525.07

Manually boaring of 500mm Dia for board Cast in situ pile by Augering up to 15mtr depth using

12 required tools & tackles to execute the work. For measurement the depth of Augering to be RMT 5.00 742.71

considered from G.L. (SVP Approved rate)

Sr. no Item Description Unit Quantity Unit Rate Amount

Removal of existing Structural Steel (I - Section, Chequred Plate, etc…) at any height

mechanically & manually (SVP Approved rate)

Providing & laying in compact manner 230mm Thick Hard Core Rubble Soiling (SVP Approved

Providing & Laying Glass Mural Works of approved design / pattern using necessary Adhesive &

White Cement Grout upto 12mtr. Height from Floor including all material & accessories,

scaffholding, fixing, labour, wastage, taxes etc… (SVP Approved rate)

Demolition of Brick Work / AAC Block including stacking of servicable material & disposal of

unservicable material (SVP Approved rate)

R&B SOR 2024-25, Item no.20003B, Page No.149

Providing & Fixing SS 304 Grade 2mm Finish Cladding on Atrium Round Column as per Drawing

& Detail upto 4.65M Height (SVP Approved rate)

Rate are for Extra & Above the BOQ Items 3.2 (on Page No. 16/77) for M. S. Fabrication related

Work 2mm Thick SS Fabrication & Fixing MS Fabrication & Fixing of Cutomized 610m Dia MS Kg 50.00 44.94

Clamps including necessary slotting, primer & colour coat, etc… (SVP Approved rate)

Rate are for Extra & Above the BOQ Items 3.4 (on Page No. 16/77) for S. S. Cladding only 2mm

Thick SS Fabrication & Fixing (With Labour + Material) (SVP Approved rate)

Providing labour charges for Granite Moulding Nosing work and Fixing 18MM Thick Mirror/Edge

/Shell polished of approved shape, size, colour, design & pattern as per architect, at wherever

requred : including rubbing, curing, polishing, removing any unevenness in the surface etc. all

completed as per Drawings, and as ditected by Engineer-in-Charge at all lift, all floor levels, all

heights & leads. The item to include all material, fixing, labour, wastage etc. in all respect. (SVP

Providing & Fixing 25.5mm thick Wooden Moulding at junctions of walls and floors at of

approved shape, size, colour, design & pattern as per architect, at wherever requred including

19 rubbing, curing, polishing, removing any unevenness in the surface etc. all completed as per RMT 50.00 118.65

Drawings, and as ditected by Engineer-in-Charge at all lift, all floor levels, all heights & leads.

The item to include all material, fixing, labour, wastage etc. in all respect. (SVP Approved rate)

Conducting of Integrity Test on Pile with all necessary instrumrnts etc… complete with

submission of report for 1200mm Dia or 1000mm Dia… (SVP Approved rate)

20 Conducting of Dynamic Test on 1200mm Dia Pile or 1000 Dia Pile with all necessary equipment,

instruments etc… complete with submission of report (without cast of pile extend from cutt off Nos. 0.00 74,741.07 -

level to G. L. Level). (SVP Approved rate)

Providing & applying the elastometric Polysulfied base sealant over 50mm thick Expansion Joint

along S. S. 304 Grade having 2mm thickness as per EIC's instruction (SVP Approved rate)

Material RMT 2,706.01

Labour RMT 316.66

Providing & Fixing 50mm thick Expansion Joint by Hydro Cell Semi rigid UV Resistance with high

performance laminated closed cell polythene foam joint filler in sheet foam (SVP Approved rate)

Providing Centering shuttering and propping etc… and removal of the same for in situ reinforced

concrete and plain concrete work, for wall of any Thickness including attached Piller,

Butteresses, Plinth & String Courses, etc. (SVP Approved rate)

Providing Centering shuttering and propping etc… and removal of the same for in situ reinforced

concrete and plain concrete work, for Suspended Floors, Roofs, Landings, Balconies, Access

22 Platforms, Heavy Slabs, etc… up to 3.5mtr Height (SVP Approved rate)

Providing Centering shuttering strutting with adequare bracing, propping etc… and removal of

the same for in situ reinforced concrete and plain concrete work, for Suspended Floors, Roofs,

Landings, Balconies, Access Platforms, Heavy Slabs, etc… over 3.5mtr Height, for every SMT 50.00 126.38

additional height of 1 mtr. or part there of i.e. 3.5M to 5.5M Height (SVP Approved rate)

P & F 150mm Dia. Buttterfly Valve (SVP Approved rate)

Material Supply Nos. 4,490.81

Labour Charges 1,727.23

P & F 100mm Dia. Buttterfly Valve (SVP Approved rate)

Material Supply Nos. 2,993.88

Labour Charges 1,496.94

P & F 150mm Dia. Non Return Valve (NRV) (SVP Approved rate)

Material Supply Nos. 12,194.28

Labour Charges 1,727.23

23 P & F 150 Dia. Strainer (SVP Approved rate)

Sr. no Item Description Unit Quantity Unit Rate Amount

Material Supply Nos. 9,062.22

Labour Charges 1,727.23

P & F 80 Dia. Strainer (SVP Approved rate)

Material Supply Nos. 3,477.51

Labour Charges 1,036.34

P & F 65 Dia. Strainer (SVP Approved rate)

Material Supply Nos. 2,878.72

Labour Charges 921.19

P & Grouting GP2 in Pump Foundation

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight

calcium silicate false ceiling tiles as per aproved list of makes and approved texture

24 spintone/ cosmos/Hexa or equivalent of size 595 x 595 mm in true horizontal level,AS SMT 200.00 937.50

PART OF MAINTANACE WORK as per instruction of EIC. (SVP Approved rate)

25 Welding Charg (SOR R&B 2024-25 Item code 596) RMT 100.00 508.47

Providing and fixing EZ-7 section door/window frame including welding and fixtures fastenings

26 including 3 coats of approved enamel oil paint etc complete. (SOR R&B 2024-25 Item Code- SMT 150.00 721.35

PART - B WATER MIST & SPRINKLER FIRE SYSTEM

S.No. Description of Item Amount

Part-I HAND HELD MIST FIRE FIGHTING SYSTEM

Part-II WATER MIST SRINKLER SYSTEM

Part-III RE-FILLING OF CO2,DCP AND WATER CO2 AND OTHER

Part-IV Fire Door

TOTAL OF PART A+B+C+D

Part-I MIST FIRE FIGHTING SYSTEM

S.No. Description of Item Unit Qty. Rate Amount

A6 Supplying, laying testing and commissioning of following size 1.1 kV grade

aluminium/copper conductor XLPE/PVC insulated armoured cables on

existing cable trayincluding End termination for fixing accessories with

double compression type cable gland and heavy duty tinned copper

cable sockets as per the relevant IS standards. Rate shall be inclusive of all

sundry materials like adhesive tape , PVC sleeves , bolts and nuts,

washers etc. including plugging unused holes. (SVP Approved rate)

a) 3C x 25 sqmm AYFY cable ( to main pump ) Rmt 1.00 556.25

b) 12C x 1.5 sqmm AYFY cable ( for Deisel driven pump) Rmt 1.00 359.82

c) 3C x 2.5 sqmm YXY cable ( for ON/OFF switchs for Hose reel system)

A7 Supply and installation of GI Perforated cable trays of following sizes made

out of 2mm thick GI sheet including all supports as required

Approved L.G. Hospital Rate Without Tax

A8 Supply and laying of following size hot dip galvanized GI strips to run along

with cable trays for erathing of all motors (SVP Approved rate)

(a) 50X6mm GI strip Rmt 1.00 175.89

A9 Supply, installation, testing and commissioning of SS 304 ball valve at

bar working pressure for suction as per direction of Engineer in Charge. Nos 20.00 7,928.57

Approved L.G. Hospital Rate Without Tax

A10 Supply, installation, testing and commissioning of Safety valve SS or Brass

set @ 150 bar pressure as per direction of Engineer in Charge. (SVP Nos 1.00 24,542.86

SS valve or brass set @ 100bar pressure

A11 Supply, installation, testing and commissioning of SS 304 schedule

piping with fittings, flange, nut and bolts, clamps, o-rings. Suction,

deliveryand By pass lines. (SVP Approved rate)

(a)50 MM Dia. Mtrs 10.00 3,742.86

S.No. Description of Item Unit Qty. Rate Amount

(b)40 MM Dia. Mtrs 10.00 3,429.46

A12 Supply and installation of other accessories like 1no 10000ltrs SS 304 tank

for water mist Hose reel system. (SVP Approved rate) Nos - - -

Basement-2 Floor

A13 Supply,installation,testing and commissioning of Pressure Guages 200 bar

100mm dia 3/8 BSP connection with needle valve (SVP Approved rate)

Basement-2 Floor Nos 10.00 3,924.11

A14 Supply,installation,testing and commissioning of Y-Type Twin strainers for

each pump. (SVP Approved rate)

(a) 50mm dia in pump room Nos 3.00 13,500.00

Approved L.G. Hospital Rate Without Tax

A15 Supply, installation, testing and commissioning of Manual On/ Off buttons

with break glass to start & stop Fire Hose reel pump in case of emergency

with complete elctrical connections and 1.5 sq mm frls wiring.(The ON/OFF

switch is tested at factory and performance approved by the Local fire

Authority). (SVP Approved rate)

Up to Terrace Floor Nos 20.00 1,974.11

A16 Supply, installation, testing and commissioning of Water Mist Hose Reel

drum on each floor. LM 25 Hose reel drum & water ways complete made

of SS & High tensile brass with winding gear arrangement (The Hosereel is

tested at factory and is approved by the Local fire Authority). (SVP

Up to Terrace Floor Nos 10.00 58,300.89

A17 Supply, installation, testing and commissioning of High pressure mist gun

LPM @ 100 bar capacity with hydraulically compensated trigger made of

high tensile brass and SS and allowing ergonomic operation without user

fatigue. It should also accommodate jet and fog mechanism (The gun is

tested at factory and is approved by the Local fire Authority). (SVP

Up to Terrace Floor Nos 20.00 81,916.96

A18 Supply, installation, testing and commissioning of 60 mt length High

pressure Hose pipe which has to be 16mm Dia R2 hose on each floor. It

should have a minimum thickness of lining as 1.5 mm and of cover as 1 mm.

Working pressure has to be 250 bar and testing pressure as 500 bar and is

pulsation resistant (The Hose is tested at factory and is approved by the

Local fire Authority). (SVP Approved rate)

Up to Terrace Floor Nos 10.00 44,014.29

A19 Supply, installation, testing and commissioning of SS 304 Ball valve 19mm

dia (3/4'') on each floor 150 Kg/cm2 working pressure.(The Valve is tested

at factory and is approved by the Local fire Authority). (SVP Approved rate)

Up to Terrace Floor Nos 20.00 3,650.89

S.No. Description of Item Unit Qty. Rate Amount

A20 Supply and fixing of S.S 304 Piping (Schedule 40 seamless) consisting of high

pressure fittings,compression fittings and necessary M.S. brackets etc (For

water Mist vertical Riser & other connections).(SVP Approved rate)

A21 Supply and fixing of S.S 304 Piping (Schedule 40 seamless) consisting of high

pressure fittings,compression fittings and necessary M.S. brackets etc (For

water Mist header, loop & other connections).(SVP Approved rate)

a) 20 mm dia Rmt 6.00 2,313.39

A22 Supply, installation, testing and commissioning of SS 304 Ball valve at

bar working pressure at delivery at all floor levels (SVP Approved rate)

A23 Supply,installation,testing and commissioning of 2-WAY Brigade with high

pressor cntrols & valves inletwith NRV and other fixing accessories (SVP

A24 Supply fabrication and erection of MS angle supports for Pipe lines (SVP

TOTAL OF MIST FIRE FIGHTING SYSTEM Rs.

WATER MIST SPRINKLER SYSTEM

B5 Supply, installation, testing and commissioning of SS 304 ball valve for

suction (SVP Approved rate)

B6 Supply, installation, testing and commissioning of SS 304 ball valve at

working pressure for delivery (SVP Approved rate)

B7 Supply and installation of other accessories like 1no 10000ltrs SS 304 tank

for water mist Hose reel system. (SVP Approved rate)

Terrace Floor Nos - - -

B8 Supply,installation,testing and commissioning of Y-Type High pressor

strainers for Mist system (SVP Approved rate)

(a) 150mm dia in pump room Nos 1.00 18,867.86

B9 Supply, installation, testing and commissioning of SS 304 ball valve at 21bar

working pressure for delivery (SVP Approved rate)

B10 Supply installation testing and commissioning of 20 Zone Control panel with

Fire/Fault indications for the Sprinkler Flow switches (SVP Approved rate) Nos 1.00 33,909.82

S.No. Description of Item Unit Qty. Rate Amount

B11 Supply,installation,testing and commissioning of cable for control valves,

FRLS Armoured cable (3c X 1.5sq.mm.) (SVP Approved rate) Rmt 1.00 157.14

B12 Supplying, laying testing and commissioning of following size 1.1 kv grade

aluminium/copper conductor XLPE/PVC insulated armoured cables on

existing cable trayincluding End termination for fixing accessories with

double compression type cable gland and heavy duty tinned copper

cable sockets as per the relevant IS standards. Rate shall be inclusive of all

sundry materials like adhesive tape , PVC sleeves , bolts and nuts,

washers etc. including plugging unused holes. (SVP Approved rate)

a) 3 core 120Sq.mm AYFY cable ( Frm FHC Panel to Sprinkler Panel)

b) 3C x 70 sqmm AYFY cable ( to main pump ) Rmt 1.00 359.82

c) 12C x 1.5 sqmm AYFY cable ( for Deisel driven pump) Rmt 1.00 157.14

B13 Supply and installation of GI Perforated cable trays of following sizes made

out of 2mm thick GI sheet including all supports as required (SVP Approved

(a) 300mmX50mm Rmt 1.00 516.96

(b) 150mmX25mm Rmt 1.00 344.64

B14 Supply and laying of following size hot dip galvanized GI strips to run along

with cable trays for erathing of all motors (SVP Approved rate)

(a) 50X6mm GI strip Rmt 1.00 175.89

PIPELINE AND ACCESSORIES FOR ALL FLOORS

B15 Supply installation testing and commissioning of ABC type Fire Extinguisher

of 2Kgs. capacity for Lifts, fitted with discharge control valve (squeeze grip

type) , inside co2 gas cartridge of 60gms with IS:4947 and ISI mark, with

discharge hase and open nozzel overall conforming to IS: 15683 with ISI Nos 1.00 1,622.32

mark along with wall bracket and initial refilling at site . Fire Rating 3A. (SVP

B16 Supply,installation,testing and commissioning of Water mist Sprinkler

(Below False ceiling) of 15 lpm discharge capacity @ minimum 7 bar

breakable at 57 degree Celsius with ½ “ inlet connection with roset plate

and all accessories, supports and painting etc.

(The sprinkler is tested at factory and is approved by the Local fire

Authority). (SVP Approved rate)

Up to Terrace Floor Nos 100.00 937.50

B17 Supply,installation,testing and commissioning of Water mist Sprinkler

(Above False ceiling) of 15 lpm discharge capacity @ minimum 7 bar

breakable at 57 degree Celsius with ½ “ inlet connection with roset plate

and all accessories, supports and painting etc.

(The sprinkler is tested at factory and is approved by the Local fire

Authority). (SVP Approved rate)

Up to Terrace Floor Nos 100.00 937.50

S.No. Description of Item Unit Qty. Rate Amount

B18 Supply,installation,testing and commissioning of Water mist Sprinkler (Side

wall type) of 15 lpm discharge capacity @ minimum 7 bar breakable at

degree Celsius with ½ “ inlet connection with roset plate and all accessories,

supports and painting etc. (SVP Approved rate)

Up to Terrace Floor Nos 1.00 937.50

B19 Supply and installation, testing and commissioning of SS Sprinkler flexible

Pipe required length of 1.5M including angles, supports and all accessories

(UL Listed) (SVP Approved rate)

B20 Supplying, installation testing and commissioning of the following (Class 'C')

MS pipes and fittings confirming to IS 1239 P I & II, The pipes complete with

necessary specials such as tees, bends, flanges, reducers, etc. Rate quoted

shall include for painting of pipe with a coat of primer and two coats of

synthetic enamel paint of approved colour / make for aboveground piping

and coating & wrapping for under ground piping as per Local fire service

department requirement complete including supply and installation of pipe

supports from column/wall or suspenders from roof slab to suit various dia

of pipes made out of GI adjustable rods threaded for a sufficient length to

adjust the height of support along with clamping arrangement for holding

pipes of anchor fastening arrangement design of hanger ETC., (SVP

Above ground piping with necessary flanges & fittings such as elbows, tees

and Painting, supports and Orifice plates if any necessary for the fire

protection system complete as per the requirement of Local fire service

department. (SVP Approved rate)

i a) 100 mm dia ( Down comer) Rmt 1.00 1,444.64

ii Basement-2 Floor

a) 20 / 25mm mm dia Rmt 12.00 245.54

b) 40 mm dia Rmt 12.00 393.75

c) 65 mm dia Rmt 12.00 724.11

b) 32 mm dia Rmt 6.00 358.04

c) 50 mm dia Rmt 6.00 573.21

d) 80 mm dia Rmt 6.00 918.75

B21 Supply installation testing and commissioning of Water CO2 type Fire

Extinguisher of 9Kgs. capacity, fitted with discharge control valve ( squeeze

grip type ) , inside co2 gas cartridge of 60gms conforming IS:4947 with ISI

mark, with discharge hase and open nozzel overall conforming to IS:

with ISI mark along with wall bracket and initial refilling at site . Fire Rating

3A. (SVP Approved rate)

From Basement-2 Floor to Terrace Floor Nos 30.00 4,503.57

S.No. Description of Item Unit Qty. Rate Amount

B22 Supply installation testing and commissioning of CO2 type Fire Extinguisher

of 4.5 kgs capacity made from brand new seamless drawn steel cylinder

conforming to IS : 7285 with ISI mark and Chief of controller of explosives

approval, fitted with wheel valve conforming to IS: 3224 with ISI mark, with

discharge hose and horn and supplied complete with initial charge overall

conforming to IS: 15683 with ISI mark and wall bracket. Fire Rating 21B (SVP

Upto Terrace Floor Nos 20.00 8,352.68

B23 Supply installation testing and commissioning of Dry Chemical Powder

kg capacity fitted with discharge control valve ( squeeze grip type ), inside

co2 gas cartridge of 120gms conforming to IS: 4947 with ISI mark and DCP

powder as per IS: 14609 ( for ABC class ) with ISI mark packed in 5kgs HDPE

bags, with discharge hose and open nozzel and supplied complete with

initial charge overall conforming to ISI: 15683 ISI mark and wall bracket .

Fire Rating 34B. (SVP Approved rate)

Upto Terrace Floor Nos 10.00 3,195.54

B24 Supply installation and fixing of flow switches in the following Pipe line

with 1NO+1NC Contacts at all hight and all level as per instructions of EIC.

(SVP Approved rate)

From Basement-2 Floor to Terrace Floor Nos 5.00 2,995.54

B25 Fire buckets round bottom type enamel painted, white inside & Red out

side and Letter "FIRE" in black out side and handle with mounting bracket. Nos 5.00 493.75

(SVP Approved rate)

B26 Fire bucket stand fabricated by MS angles to install 2 Nos. of buckets. (SVP

Approved rate) Nos 5.00 2,138.39

TOTAL OF WATER MIST SPRINKLER SYSTEM Rs.

RE-FILLING OF CO2,DCP AND WATER CO2 AND OTHER

S.No. Description of Item Unit Qty. Rate Amount

Refilling of CO2 4.5 KG AS PER ISI MAKE and as per instruction of fire man

on site etc. comp. (SVP Approved rate)

Refilling of WATER CO2 9 LIT. AS PER ISI MAKE and as per instruction of

fire man on site etc. comp. (SVP Approved rate)

Refilling of DCP 6 KG AS PER ISI MAKE and as per instruction of fire man

on site etc. comp. (SVP Approved rate)

HOSE RILL RELATED ANY ITEMS / PIPLE WITH CLAMPS as per instruction

of fire man on site etc. comp. (SVP Approved rate)

S.No. Description of Item Unit Qty. Rate Amount

S.No. Description of Item Unit Qty. Rate Amount

Providing & fixing of Fire Rated door as per list of approved makes with GI

Frame , Fire Resisting 2 Hour fire rated 46mm thick GI doors as per IS

3614(Part-02) and BS 476, Part 20 & 22 of aproved make of specified

sizes with 3 sided frames having 143 x 57 with thickness 1.6mm G.I profile

sheet frame duly filled with vermuculite based concrete mix , 50mm single

rebate, 46 mm thick 18g. G.I sheet single shutter with or without view panel

(max. size 100 Sq. In) and honeycomb infill OR rock wool insulated . Fire

door must be self opening with the use of door soleniod electromagnet.

The rate shall be inclusive of all fire rated SS hardwares and approved

shade of spray painted fire rated colour. No waiveness on the shutter

surface shall be accepted. Opening/swing details of fire door shall be as

per drawings. Fixing of the fire door frame shall be with S.S anchor

fastners with 10 mm groove around the frame and wall and groove shall be

filled with approved shade neutral cure silicon sealent with required size

baker rod. Sample shall be approved by Architect/EIC before material

procurement and component of door set prototype tested and certified by

GQMC-Goverment quality marking center or CBRI or ARAI.

Note : For Billing purpose number of doors with sizes given below will be

count. All fixtures shown in drawings shall be provide with the door no

separate will paid for any fixture. On shutter sheet paint of approved shade

shall be applied also. Fire rated hardwares like, door closer, hinges, panic

bar etc. shall be of approved make list. The rate includes for all lead and lift

as directed by EIC.

1.1 Door - D4 - size - 1800 mm x 2100 mm (with panic bar) Nos 30.0

1.1 Door - D5 - size - 1800 mm x 2100 mm (without panic bar) Nos 30.0

1.1 c Door - D12 - size - 1200 mm x 2100 mm (with panic bar) Nos 15.0

1.1 Door - D18 - size - 1000 mm x 2100 mm (without panic bar) Nos 15.0

1.1 Door - D10- Size - 1500 mm X 2100 mm Nos 15.0

1.2 MORTICE LOCK DEAD BOLT WITH DOUBLE CYLINDER

Providing and fixing stainless steel dead lock EC and both side Key cylinder

of 60mm size with necessary ss screws etc .complete as per approved

make list and sample approved by EIC .Rate shall be for all heights, all

floors and all places .

1.3 MORTICE LOCK DEAD BOLT WITH SINGLE CYLINDER

Providing and fixing stainless steel dead lock EC and Euro profie

Cylinder with one side key and one side knob as per approved make list

with necessary ss screws etc .complete as per sample approved by EIC

.Rate shall be for all heights ,all floors and all places .

1.4 THUMB TURN & COIN SLOT

Providing and fixing dead lock EC and Euro profile cylinder-coin and

knob 60 mm of as per approved list, and sample approved by EIC .Rate NOS 25.00 840.96

shall be for all heights ,all floors and all places .

1.50 FLOOR SPRING (HEAVY DUTY)

Providing and fixing stainless steel adjustable floor spring as per approved

make list with necessary ss phillips head screws etc .complete as per

drawing and sample approved by EIC .Rate shall be for all heights ,all

floors and all places .

1.60 FLUSH BOLT

Providing and fixing Manual Flush bolt for Metal doors 172mm (with

300mm length rod) as per approved make list as per sample approved NOS 15.00 442.60

by EIC .Rate shall be for all heights ,all floors and all places .

1.70 S.S DOOR STOPPER

S.No. Description of Item Unit Qty. Rate Amount

Providing and fixing stainless steel hanging type floor door stopper as per

approved make list as per sample approved by EIC .Rate shall be for all NOS 20.00 160.88

heights ,all floors and all places .

1.80 SS PULL HANDLE

Providing and fixing Stainless Steel handles of for 22 mm dia

mm long with necessary ss screws etc

.complete as per approved make list as per drawing and sample approved

by EIC .Rate shall be for all heights ,all floors and all places .

1.90 SS concealed HANDLE

Providing and fixing Stainless Steel concealed handles as per approved

list with approved quality with necessary screws etc.complete for 120 NOS 20.00 614.66

2.00 SS PULL HANDLE

Providing and fixing Stainless Steel handles of 19 mm dia 200 mm

long with necessary ss screws etc

.complete as per approved make list as per sample approved by EIC .Rate

shall be for all heights ,all floors and all places .

2.10 SS LEVER HANDLE

Providing and fixing Stainless Steel lever handles(8 inch) with

necessary ss screws etc .complete as per approved make list as per

sample approved by EIC. Rate shall be for all heights ,all floors and all

Providing and fixing IS : 12817 marked stainless steel butt hinges with

stainless steel screws etc. complete

:125x64x1.9 mm. Approved make as mention in approved list with

approved quality with necessary screws etc. complete.

Providing and fixing door solenoid electromagnet with stainless steel screws

2.12 etc. complete as per approved make list as per sample approved by EIC. NOS 20.00 678.57

Rate shall be for all heights, all floors and all places.

2.13 HYDRAULIC DOOR CLOSER(HEAVY DUTY)

Providing & fixing door closer with necessary SS screws etc complete.

as per approved make list as per drawing and sample approved by

EIC.Rate shall be for all heights ,all floors and all places and shall be

inclusive of fixing with using the templete as per supplier's

specification & maintaing in good working condition uptill defect liability

2.14 HYDRAULIC DOOR CLOSER(MEDIUM DUTY)

Providing & fixing door closer with necessary SS screws etc complete.

as per approved make list as per drawing and sample approved by EIC

.Rate shall be for all heights ,all floors and all places and shall be inclusive NOS 25.00 1,130.02

of fixing with using the templete as per supplier's specification &

maintaing in good working condition uptill defect liability period.

2.15 KICK PLATE

Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15

mm, anodised (anodic coating not less than grade AC 10 as per IS

:1868), transparent or dyed to required colour or shade, with

necessary screws etc. complete.

2.16 PUSH PLATE

Providing and Fixing Push plate of size 1435 x 200 mm - 1.5 mm thick -

Stainless steel satin finish - 316 L grade with SS screws as per approved NOS 20.00 1,522.36

make with approved quality with necessary screws etc. complete.

PART - C FOR INTERIOR WORKS

Sr.No. Approxomate Size Item description Unit Quantity Rate Amount

Part-1 INTERIOR WORKS

PART-1(A) - FURNITURE WORK

Providing and fixing Pannelling with commercial MR grade plywood in

thickness, shape,size and height as per Interior design drawing. Plywood will be

finished with 1mm thick laminate on external side. All the edges shall be

finished with rigid 6mm thick wooden edge lipping matching to laminate. The

standards of plywood should follow IS 303 and for Laminate follow IS 2046. The

rate should include the cost of making provision for holes/cutout of any size

and shape for electrical switches, sockets, medical gas outlets, nurse call, wires

& conduits etc.including other accessories. All above materials should be as per

approved make list and should be completed as per Interior design drawing

1 and executed at site to the complete satisfaction of Architect and Engineer-in- No. 1.00 6,224.79

charge. The rates are inclusive of scaffolding, all lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects. Panel shall be openable partly having SS screws with

cap as indicated in the relevant design drawing and all materials must confirm

latest relevant standard. (Measurement : Item-wise including all kind of

wastages of each item used for preparation of this item)

a) BHP Double (Triangular) (SVP Approved rate)

b Triangular BHP Single (Triangular) No. 1.00 7,652.68

c BHP3B (350x460) Bed Head Panel (350x460) BHP3B No. 1.00 7,158.04

d BHP3C (300x350) Bed Head Panel (300x350) BHP3C No. 1.00 6,368.75

e BHP4, 4A (460x250) Bed Head Panel (460x250) BHP4, 4A No. 1.00 11,521.43

Panelling for Bed Head panel in Semidelux Room-two sharing

Providing and fixing Bed head Pannelling with commercial MR grade plywood

in thickness, shape,size and height as per Interior design drawing. Plywood will

be finished with 1mm thick laminate on external side. All the edges shall be

finished with rigid 6mm thick wooden edge lipping matching to laminate. The

standards of plywood should follow IS 303 and for Laminate follow IS 2046. The

rate should include the cost of making provision for holes/cutout of any size

2 and shape for electrical wires & conduits etc.including other accessories. All No. 1.00 19,413.39

above materials should be as per approved make list and should be completed

as per Interior design drawing and executed at site to the complete

satisfaction of Architect and Engineer-in-charge. The rates are inclusive of

scaffolding, all lead and lift,all floor levels, all heights, all material and

accessories, fixing, labour, wastage, taxes etc. complete in all respects. and all

materials must confirm latest relevant standard. (Measurement : Item-wise

including all kind of wastages of each item used for preparation of this item)

(SVP Approved rate)

Panelling for Bed Head panel in Delux Room

Providing and fixing Bed head Pannelling with commercial MR grade plywood

in thickness, shape,size and height as per Interior design drawing. Plywood will

be finished with 1mm thick laminate on external side. All the edges shall be

finished with rigid 6mm thick wooden edge lipping matching to laminate. The

standards of plywood should follow IS 303 and for Laminate follow IS 2046. The

rate should include the cost of making provision for holes/cutout of any size

3 and shape for electrical wires & conduits etc.including other accessories. All No. 1.00 12,641.96

above materials should be as per approved make list and should be completed

as per Interior design drawing and executed at site to the complete

satisfaction of Architect and Engineer-in-charge. The rates are inclusive of

scaffolding, all lead and lift,all floor levels, all heights, all material and

accessories, fixing, labour, wastage, taxes etc. complete in all respects. and all

materials must confirm latest relevant standard. (Measurement : Item-wise

including all kind of wastages of each item used for preparation of this item)

Panelling for Bed Head panel in Suite Room

Providing and fixing Bed head Pannelling with commercial MR grade plywood

in thickness, shape,size and height as per Interior design drawing. Plywood will

be finished with 1mm thick laminate on external side. All the edges shall be

finished with rigid 6mm thick wooden edge lipping matching to laminate. The

standards of plywood should follow IS 303 and for Laminate follow IS 2046. The

rate should include the cost of making provision for holes/cutout of any size

4 and shape for electrical wires & conduits etc.including other accessories. All No. 1.00 12,683.04

above materials should be as per approved make list and should be completed

as per Interior design drawing and executed at site to the complete

satisfaction of Architect and Engineer-in-charge. The rates are inclusive of

scaffolding, all lead and lift,all floor levels, all heights, all material and

accessories, fixing, labour, wastage, taxes etc. complete in all respects. and all

materials must confirm latest relevant standard. (Measurement : Item-wise

including all kind of wastages of each item used for preparation of this item)

(SVP Approved rate)

Providing and fixing wall mounted back storage unit with Lockable shutters of

18mm thick Commercial MR grade plywood for Nurse station. The plywood

shall be finshed both side with 1 mm thick laminate as per Interior design

drawing. All the edges shall be finished with rigid 6mm thick wooden edge

lipping matching to laminate. This also includes providing and fixing necessary

hardware like self closing Hinges, Locks etc. all complete as per approved

make and as shown in Interior design drawing. The standards of plywood

should follow IS 303 and the standards of laminate should follow IS 2046. .The

rate should include the cost of making provision for holes/cutout of any size

and shape for electrical wires & conduits etc.including other accessories. The

above works shall be completed as per Interior design drawing and executed

at site to the complete satisfaction of Architect and Engineer-in-charge. The

rates are inclusive of all lead and lift,all floor levels, all heights, all material and

accessories, fixing, labour, wastage, taxes etc. complete in all respects. For all

items approved make list shall be followed.and all materials must confirm latest

relevant standard. (Measurement : Item-wise including all kind of wastages of

a (3212X400) each item used

STORAGE for preparation of this item) (SVP Approved rate)

b (1640X400) STORAGE OF NST8A No. 1.00 6,965.18

Sr.No. Approxomate Size Item description Unit Quantity Rate Amount

Providing and fixing back storage unit with Lockable shutters of Commercial MR

grade plywood for nurse station. The shape,size and thickness specified as per

Interior design drawing.Top surface of storage unit will be finished in 12mm thk

solid acrylic surface as/ approved color fixed over 12mm thk commercial MR

grade plywood.The plywood shall be finshed both side with 1 mm thick laminate

as per Interior design drawing. All the edges shall be finished with rigid 6mm

thick wooden edge lipping matching to laminate. This also includes providing

and fixing necessary hardware like self closing Hinges, Locks, Pull handles,

10mm thick nylone shoes etc. all complete as per approved make and as

shown in Interior design drawing. The standards of plywood should follow IS

303 and The standards of laminate should follow IS 2046. The rate should

include the cost of making provision for holes/cutout of any size and shape for

6 electrical wires & conduits/Wash basin etc.including other accessories. The

above works shall be completed as per Interior design drawing and executed

at site to the complete satisfaction of Architect and Engineer-in-charge. The

rates are inclusive of all lead and lift,all floor levels, all heights, all material and

accessories, fixing, labour, wastage, taxes etc. complete in all respects. For all

items approved make list shall be followed.and all materials must confirm latest

relevant standard. (Measurement : Item-wise including all kind of wastages of

each item used for preparation of this item) (SVP Approved rate)

a (3212X400) Storage of NST8, Storage on floor No. 1.00 38,038.39

b (1640X400) Storage of NST8A, Storage on floor No. 1.00 18,822.32

COUNTER BELOW BASIN (CBB)

Providing and fixing Counter below basin made from Marine grade plywood in

shape,size and thickness specified as per Interior design drawing. The storage

unit shall have shutters made in plywood with 1 mm thick laminate both side as

indicated in the Interior design drawing. All the edges shall be finished with rigid

6mm thick wooden edge lipping matching to laminate. This also includes

providing and fixing necessary hardware like self closing Hinges ,"D" shape

handles etc. all complete as per approved make and as shown in Interior design

drawing. The standards of plywood should follow IS 710 and the standards of

laminate should follow IS 2046. The rate should include the cost of making

provision for holes/cutout of any size and shape for electrical wires &

7 CBB (900X600) conduits/Wash basin etc.including other accessories. The above works shall be No 1.00 1,885.71

completed as per Interior design drawing and executed at site to the complete

satisfaction of Architect and Engineer-in-charge. The rates are inclusive of all

lead and lift,all floor levels, all heights, all material and accessories, fixing,

labour, wastage, taxes etc. complete in all respects. For all items approved

make list shall be followed. and all materials must confirm latest relevant

standard. (Measurement : Item-wise including all kind of wastages of each item

used for preparation of this item) (SVP Approved rate)

Storage below Wash basin at NST

Providing and fixing cupboard below basin made from Marine grade plywood in

shape,size and thickness specified as per Interior design drawing. The top of

the cupboard shall be finished with 12mm thick acrylic surface in required

shape and size to fox wash basin in it. The storage unit shall have shutters

made in plywood with 1 mm thick laminate both side as indicated in the Interior

design drawing. All the edges shall be finished with rigid 6mm thick wooden

edge lipping matching to laminate. This also includes providing and fixing

necessary hardware like self closing Hinges ,"D" shape handles, nylon shoes

etc. all complete as per approved make and as shown in Interior design

drawing. The standards of plywood should follow IS 710 and the standards of

laminate should follow IS 2046. The rate should include the cost of making

8 (1640X600) provision for holes/cutout of any size and shape for electrical wires & No 1.00 7,079.46

conduits/Wash basin etc.including other accessories. The above works shall be

completed as per Interior design drawing and executed at site to the complete

satisfaction of Architect and Engineer-in-charge. The rates are inclusive of all

lead and lift,all floor levels, all heights, all material and accessories, fixing,

labour, wastage, taxes etc. complete in all respects. For all items approved

make list shall be followed. and all materials must confirm latest relevant

standard. (Measurement : Item-wise including all kind of wastages of each item

used for preparation of this item) (SVP Approved rate)

Providing and fixing cupboard for PTS station packed from three sides and top

and bottom with 18mm thick commercial MR grade plywood in shape,size and

height as per Interior design drawing. Plywood will be finished with 1mm thick

laminate both side. All the edges shall be finished with rigid 6mm thick wooden

edge lipping matching to laminate. The standards of plywood should follow IS

303 and the standards of laminate should follow IS 2046. The rate should

include the cost of making provision for holes/cutout of any size and shape for

electrical wires & conduits/Wash basin, PTS tube etc.including other

accessories. All above materials should be as per approved make list and

9 PB (650X650) should be completed as per Interior design drawing and executed at site to No 1.00 10,982.14

the complete satisfaction of Architect and Engineer-in-charge. The rates are

inclusive of scaffolding, all lead and lift,all floor levels, all heights, all material

and accessories, fixing, labour, wastage, taxes etc. complete in all respects.

and all materials must confirm latest relevant standard. (Measurement : Item-

wise including all kind of wastages of each item used for preparation of this

item) (SVP Approved rate)

Sr.No. Approxomate Size Item description Unit Quantity Rate Amount

Café kichen serving table

Providing and fixing Cafe serving table made from Commercial MR grade

plywood in shape,size and thickness specified as per Interior design drawing.

Upper level counter top 975 mm high, 300 mm. wide to be finished in 18mm thk

polished granite on top and 1mm thick laminate on bottom. 8 mm thick Soft

board with fabric should be fixed with upper level counter as per shown in

Interior design drawing. Lower level counter top 750 mm high, 600 mm. wide

to be finshed top surface with 18mm thick polished granite one side and bottom

with 1 mm thick laminate.The storage unit shall have shutters and internal

shelves made in plywood with 1 mm thick laminate both side as indicated in the

Interior design drawing. All the edges shall be finished with rigid 6mm thick

wooden edge lipping matching to laminate. This also includes providing and

fixing necessary hardware like self closing Hinges,"D" shape handles,

telescopic soft close channel,Lock, Catcher , tower bolt etc. all complete as per

10 (5725X600) approved make and as shown in Interior design drawing. The standards of No. - - -

plywood should follow IS 303 and the standards of laminate should follow IS

2046. The rate should include the cost of making provision for holes/cutout of

any size and shape for electrical wires & conduits/Wash basin etc.including

other accessories. The above works shall be completed as per Interior design

drawing and executed at site to the complete satisfaction of Architect and

Engineer-in-charge. The rates are inclusive of all lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects. For all items approved make list shall be followed. and

all materials must confirm latest relevant standard. (Measurement : Item-wise

including all kind of wastages of each item used for preparation of this item)

(SVP Approved rate)

Storage below preparation platform (Café Kitchen)

Providing and fixing storage below plateform made from Marine BWP grade

plywood in shape,size and thickness specified as per Interior design drawing.

The top surface will be finished with 18mm thick polished granite. The storage

unit shall have shutters and internal shelves made in plywood with 1 mm thick

laminate both side as indicated in the Interior design drawing. All the edges

shall be finished with rigid 6mm thick wooden edge lipping matching to

laminate. This also includes providing and fixing necessary hardware like self

closing Hinges ,"D" shape handles, Lock etc. all complete as per approved

make and as shown in Interior design drawing. The standards of plywood

should follow IS 710 and the standards of laminate should follow IS 2046. The

11 (7475X600) rate should include the cost of making provision for holes/cutout of any size No. - - -

and shape for electrical wires & conduits/Wash basin etc.including other

accessories. The above works shall be completed as per Interior design

drawing and executed at site to the complete satisfaction of Architect and

Engineer-in-charge. The rates are inclusive of all lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects. For all items approved make list shall be followed. and

all materials must confirm latest relevant standard. (Measurement : Item-wise

including all kind of wastages of each item used for preparation of this item)

(SVP Approved rate)

COUNTER UNIT & COUNTER TABLE

Providing and fixing Counter unit of size and counter table made from

Commercial MR grade plywood in shape, size and thickness specified as per

Interior design drawing. The Plywood will be finished with 1mm thick laminate

both side as indicated in the Interior design drawing. All the edges shall be

finished with rigid 6mm thick wooden edge lipping matching to laminate. This

also includes providing and fixing necessary hardware like self closing

Hinges,"D" shape handles, Lock etc. all complete as per approved make and

as shown in Interior design drawing. The standards of plywood should follow IS

303 and the laminate should follow IS 2046. The rate should include the cost

of making provision for holes/cutout of any size and shape for electrical wires &

12 CT1, CU (2600X600) conduits/Wash basin etc.including other accessories. The above works shall be No. 1.00 14,822.32

completed as per Interior design drawing and executed at site to the complete

satisfaction of Architect and Engineer-in-charge. The rates are inclusive of all

lead and lift,all floor levels, all heights, all material and accessories, fixing,

labour, wastage, taxes etc. complete in all respects. For all items approved

make list shall be followed. and all materials must confirm latest relevant

standard. (Measurement : Item-wise including all kind of wastages of each item

used for preparation of this item)

a) COUNTER TOP AND UNIT WITH FLIP DOOR (SVP Approved rate)

COUNTER TOP AND UNIT - COUNTER TOP AND UNIT - TYPE

c CT,CU TYPE 2(5185X600) CT,CU TYPE 2 1.00 23,049.11

d CT,CU TYPE 3 (4738X600) CT,CU TYPE 3 1.00 24,209.82

e CT,CU TYPE4 (2125X600) CT,CU TYPE4 1.00 16,083.04

f CT,CU TYPE 5 (2200X600) CT,CU TYPE 5 1.00 17,100.00

Providing and fixing storage above (SA) made from Commercial MR grade

plywood in shape, size and thickness specified as per Interior design drawing.

The Plywood will be finished with 1mm thick laminate both side as indicated in

the Interior design drawing. All the edges shall be finished with rigid 6mm thick

wooden edge lipping matching to laminate. This also includes providing and

fixing necessary hardware like self closing Hinges,"D" shape handles, Lock etc.

all complete as per approved make and as shown in Interior design drawing.

The standards of plywood should follow IS 303 and the laminate should follow

IS 2046. The rate should include the cost of making provision for holes/cutout

of any size and shape for electrical wires & conduits etc.including other

13 SA (1200X300) accessories. The above works shall be completed as per Interior design No 1.00 8,080.36

drawing and executed at site to the complete satisfaction of Architect and

Engineer-in-charge. The rates are inclusive of all lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects. For all items approved make list shall be followed. and

all materials must confirm latest relevant standard. (Measurement : Item-wise

including all kind of wastages of each item used for preparation of this item)

a) Type-1 (SVP Approved rate)

Sr.No. Approxomate Size Item description Unit Quantity Rate Amount

Providing and fixing storage below (SB) made from Marin BWP grade plywood

in shape, size and thickness specified as per Interior design drawing. The

Plywood will be finished with 1mm thick laminate both side as indicated in the

Interior design drawing. All the edges shall be finished with rigid 6mm thick

wooden edge lipping matching to laminate. This also includes providing and

fixing necessary hardware like self closing Hinges,"D" shape handles, Lock etc.

all complete as per approved make and as shown in Interior design drawing.

The standards of plywood should follow IS 710 and the laminate should follow

IS 2046. The rate should include the cost of making provision for holes/cutout

of any size and shape for electrical wires & conduits/Wash basin etc.including

14 SB (1200X525) other accessories. The above works shall be completed as per Interior design No 1.00 8,784.92

drawing and executed at site to the complete satisfaction of Architect and

Engineer-in-charge. The rates are inclusive of all lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects. For all items approved make list shall be followed. and

all materials must confirm latest relevant standard. (Measurement : Item-wise

including all kind of wastages of each item used for preparation of this item)

a) Type-1 (SVP Approved rate)

Glass partition in Suite Room

Providing and fixing Glass partition in Suite room made from 5mm thick glass

with wooden framing of size given as per Interior design drawing. The partition

is Attached with floor and ceiling with 25mm dia. SS 304 pipe having thickness

of 3.2mm. The frosted film should be applied on glass as per GFC drawing. The

standards of wood should follow IS 399(2005). The rate should include the cost

of making provision for holes/cutout of any size and shape for electrical wires &

conduits etc.including other accessories. All above materials should be as per

15 P3 (2400X1800) approved make list and should be completed as per Interior design drawing No. 1.00 8,408.93

and executed at site to the complete satisfaction of Architect and Engineer-in-

charge. The rates are inclusive of scaffolding, all lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects. and all materials must confirm latest relevant standard.

(Measurement : Item-wise including all kind of wastages of each item used for

preparation of this item) (SVP Approved rate)

Providing and fixing Panelling at all nusre station of Commercial MR grade

plywood. The shape,size and thickness specified as per Interior design

drawing.The plywood shall be finshed outer side with 1 mm thick laminate as

per Interior design drawing. All the edges shall be finished with rigid 6mm thick

wooden edge lipping matching to laminate.The standards of plywood should

follow IS 303 and The standards of laminate should follow IS 2046. The rate

16 should include the cost of making provision for holes/cutout of any size and Sqm 1.00 3,909.82

shape for electrical wires & conduits/Wash basin or any services etc.including

other accessories. The above works shall be completed as per Interior design

drawing and executed at site to the complete satisfaction of Architect and

Engineer-in-charge. The rates are inclusive of all lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects. For all items approved make list shall be followed.

Providing rate) Partition of Commercial MR grade plywood for nurse

station. The shape,size and thickness specified as per Interior design

drawing.The plywood shall be finshed both side with 1 mm thick laminate as per

Interior design drawing. All the edges shall be finished with rigid 6mm thick

wooden edge lipping matching to laminate. The standards of plywood should

follow IS 303 and The standards of laminate should follow IS 2046. The rate

should include the cost of making provision for holes/cutout of any size and

shape for electrical wires & conduits/Wash basin etc.including other

17 accessories. The above works shall be completed as per Interior design Sqm 1.00 3,359.15

drawing and executed at site to the complete satisfaction of Architect and

Engineer-in-charge. The rates are inclusive of all lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects. For all items approved make list shall be

followed.Partition of NST5B and NST5C (SVP Approved rate)

Providing and fixing Panelling at Reception of Commercial MR grade plywood.

The top surface shall be made from 12mm thick solid acrylic surace on plywood

of specified thickness.The shape,size and thickness specified as per Interior

design drawing.The plywood shall be finshed both side with 1 mm thick

laminate as per Interior design drawing. All the edges shall be finished with rigid

6mm thick wooden edge lipping matching to laminate. The standards of

plywood should follow IS 303 and The standards of laminate should follow IS

2046. The rate should include the cost of making provision for holes/cutout of

18 any size and shape for electrical wires & conduits/Wash basin or any services Sqm 1.00 9,209.04

etc.including other accessories. The above works shall be completed as per

Interior design drawing and executed at site to the complete satisfaction of

Architect and Engineer-in-charge. The rates are inclusive of all lead and lift,all

floor levels, all heights, all material and accessories, fixing, labour, wastage,

taxes etc. complete in all respects. For all items approved make list shall be

followed. (SVP Approved rate)

Providing and fixing glass Partition at Reception made from wood and

Commercial MR grade plywood including sliding door mechanism, 5mm thick

glass and hardwares. The shape,size and thickness of partition specified as per

Interior design drawing.The plywood shall be finshed both side with 1 mm thick

laminate as per Interior design drawing. The standards of plywood should

follow IS 303 and The standards of laminate should follow IS 2046. The rate

19 should include the cost of making provision for holes/cutout of any size and Sqm 1.00 18,103.01

shape for electrical wires & conduits/Wash basin etc.including other

accessories. The above works shall be completed as per Interior design

drawing and executed at site to the complete satisfaction of Architect and

Engineer-in-charge. The rates are inclusive of all lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects. For all items approved make list shall be followed.

Sr.No. Approxomate Size Item description Unit Quantity Rate Amount

Providing and fixing Partition in wards made from wood with Commercial MR

grade plywood and acrylic sheet having minimum 6mm thickness. The

shape,size and thickness specified as per Interior design drawing.The plywood

shall be finshed both side with 1 mm thick laminate as per Interior design

drawing. All the edges shall be finished with rigid 6mm thick wooden edge

lipping matching to laminate. The standards of plywood should follow IS

and The standards of laminate should follow IS 2046. The rate should include

the cost of making provision for holes/cutout of any size and shape for electrical

20 wires & conduits/Wash basin etc.including other accessories. The above works Sqm 1.00 2,678.56

shall be completed as per Interior design drawing and executed at site to the

complete satisfaction of Architect and Engineer-in-charge. The rates are

inclusive of all lead and lift,all floor levels, all heights, all material and

accessories, fixing, labour, wastage, taxes etc. complete in all respects. For all

items approved make list shall be followed. (SVP Approved rate)

Providing and fixing Panelling for TV unit made from Commercial MR grade

plywood. The shape,size and thickness specified as per Interior design

drawing.The plywood shall be finshed both side with 1 mm thick laminate as per

Interior design drawing. All the edges shall be finished with rigid 6mm thick

wooden edge lipping matching to laminate. The standards of plywood should

follow IS 303 and The standards of laminate should follow IS 2046. The rate

should include the cost of making provision for holes/cutout of any size and

21 shape for electrical wires & conduits or any services etc.including other No. 1.00 1,822.32

accessories. The above works shall be completed as per Interior design

drawing and executed at site to the complete satisfaction of Architect and

Engineer-in-charge. The rates are inclusive of all lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects. For all items approved make list shall be followed.

(SVP Approved rate)

Providing and fixing wardrobe of specified thickness commercial MR grade

plywood in shape,size and height as per Interior design drawing. Plywood will

be finished with 1mm thick laminate both side. All the edges shall be finished

with rigid 6mm thick wooden edge lipping matching to laminate. This also

includes providing and fixing necessary hardware like soft closing Hinges, Lock,

Pull handles, tower bolt, 10mm thick nylone shoes etc. all complete as per

approved make and as shown in Interior design drawing. The standards of

plywood should follow IS 303 and the standards of laminate should follow IS

2046. The rate should include the cost of making provision for holes/cutout of

any size and shape for electrical wires & conduits etc.including other

22 accessories. All above materials should be as per approved make list and No. 1.00 17,272.32

should be completed as per Interior design drawing and executed at site to

the complete satisfaction of Architect and Engineer-in-charge. The rates are

inclusive of scaffolding, all lead and lift,all floor levels, all heights, all material

and accessories, fixing, labour, wastage, taxes etc. complete in all respects.

and all materials must confirm latest relevant standard. (Measurement : Item-

wise including all kind of wastages of each item used for preparation of this

item) (SVP Approved rate)

Providing and fixing Wallpaper having properties like scratch resistant, anti

fungal, anti Bactarial, fire retardant, washable, Highly scratchable etc. The

above works shall be completed as per Interior design drawing and executed

at site to the complete satisfaction of Architect and Engineer-in-charge. The

rates are inclusive of all lead and lift, all floor levels, all heights, all material and

accessories, fixing, labour, wastage, taxes etc. complete in all respects.For all

items approved make list shall be followed. and all materials must confirm latest Sqm 150.00 4,300.00

relevant standard. (Measurement : Item-wise including all kind of wastages of

each item used for preparation of this item) (SVP Approved rate)

Rate for CNC lesor machine cutting off site in any type of metal in shape,size

and thickness specified as per Interior design drawing/ manufacurer's

specifications. The above works shall be completed as per Interior design

drawing and executed at site to the complete satisfaction of Architect and

24 Engineer-in-charge. The rates are inclusive of all lead and lift,all floor levels, all Rmt - - -

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects.For all items approved make list shall be followed. For

payment Rmt of actual cutting shape will be considered.

SS -304 (SVP Approved rate)

Providing and fixing SS 304 electro plated corrosion resistant basket with

telescopic channels in shape,size and thickness specified as per Interior design

drawing/ manufacurer's specifications. The above works shall be completed as

per Interior design drawing and executed at site to the complete satisfaction of

Architect and Engineer-in-charge. The rates are inclusive of all lead and lift,all

23 floor levels, all heights, all material and accessories, fixing, labour, wastage, No. 1.00 2,733.21

taxes etc. complete in all respects.For all items approved make list shall be

followed. and all materials must confirm latest relevant standard. (Measurement

: Item-wise including all kind of wastages of each item used for preparation of

a) Plain basket - 420x485x100mm (SVP Approved rate)

b Plain basket - 420x485x200mm No. 1.00 4,047.32

e Cup and Saucer basket - 520x485x100mm No. 1.00 3,212.50

f Perforated cutlery basket - 520x485x100mm No. 1.00 5,520.54

h Two shelf pullout - 150x485x430mm No. 1.00 4,287.50

i Two shelf pullout - 200x485x430mm No. 1.00 4,354.46

Providing and fixing in position MR grade Plywood of specified thickness

following code IS 303 of approved makes as per Interior design drawing/

Instruction of EIC for for all type of loose and fixed furniture, Panelling, Partition,

24 Bed head panel,Podium etc. The rates are inclusive of all lead and lift,all floor Sqm 7.00 514.29

levels, all heights, all material, fixing, scaffolding, labour, Wastage etc.

complete in all respects.

a)Plywood 25mm th. (SVP Approved rate)

b b) Plywood 19mm th. Sqm 7.00 468.75

c c) Plywood 12mm th. Sqm 7.00 375.00

d d) Plywood 6mm th. Sqm 7.00 196.43

Sr.No. Approxomate Size Item description Unit Quantity Rate Amount

Providing and fixing in position Marine Plywood of specified thickness following

code IS 710 - 1976 of approved makes as per Interior design drawing/

Instruction of EIC for all type of loose and fixed furniture, Panelling, Partition,

25 Bed head panel etc. The rates are inclusive of all lead and lift,all floor levels, all Sqm 7.00 806.25

heights, all material, fixing, scaffolding, labour, Wastage etc. complete in all

a)Plywood 19mm th. (SVP Approved rate)

b b) Plywood 12mm th. Sqm 7.00 527.68

c c) Plywood 6mm th. Sqm 7.00 401.79

1mm th.Laminate

Providing & Fixing 1mm thick laminate sheet of plain / wood grain in gloss /

matt / suede finish with high density protective surface layer following IS

2046:1995 and reverse side of adhesive bonding quality conforming to IS :

Type S, including cost of adhesive of approved quality as per Interior design

26 drawing/ Instruction of EIC and for all type of loose and fixed furniture, Sqm 7.00 419.64

Panelling, Partition, Bed head panel, Podium on both side or either side of

plywood etc. The rates are inclusive of all lead and lift,all floor levels, all

heights, all material, fixing, scaffolding, labour, Wastage etc. complete in all

respects. (SVP Approved rate)

TOTAL OF PART-1(A)

PART-1- (B) - CIVIL WORK

Providing and fixing beveled edge mirror of 5mm thick of approved make

complete with 6 mm thick marine plywood fixed to mirror with wooden cleats

1 with C.P. brass screws and washers complete. No 5.00 1,562.50

a) 600X900mm size (SVP Approved rate)

b 900X900mm size No 3.00 2,116.07

Providing and laying night glow self adhesive vinyl Flexible Laminated Tape in

any color and shape. The above works shall be completed as per Interior

design drawing and executed at site to the complete satisfaction of Architect

and Engineer-in-charge. The rates are inclusive of all lead and lift, all floor

levels, all heights, all material and accessories, fixing, labour, wastage, taxes

1.A etc. complete in all respects.For all items approved make list shall be followed. Sqm 800.00 131.25

and all materials must confirm latest relevant standard. (Measurement : in sqm.

Item includes all kind of wastages of each item used for preparation of this item)

(SVP Approved rate)

Providing & Applying two coats of silicon & acrylic emulsion based water

thinnable sealer of approved list of make/ manufacture on wet or patchy portion

of plastered surfaces of required shade on all inner wall surfaces to give an

even shade over & including primer on wall surface having VOC content less

than 50 grams/litre with two coats after thoroughly brushing the surface free

2 DSR 13.51.2 + 13.85.3 from mortar dropping & other foreign matter and also 2 coats of water resistent Sqm 1,200.00 119.87

putty over primer in two coats to give a smooth and even finish. The rate

includes scrapping the non plastered surface as per drawing/instruction of

Engineer In Charge/ Client, complete. For all levels, heights and leads of works,

Including all material, scaffolding, labour etc. complete in all respects as per

instruction of EIC. (SVP Approved rate)

Cubicle track for Cubical Curtain

Supply and installation of heavy Duty Aluminium cubicle track size 20mm wide x

30mm high, made of aluminium Extruded with white powder coating complete

with continuous PVC liner, nylon gliders and hooks, plastic end cap, connecting

bridge, overlapping joint connector, wall brackets with matching screws to make

3 up cubicle approx. height to 2100mm clearance from floor level at approx. Rmt 800.00 776.79

1000mm spacing.with all accessories of approved brand/makes along with

Aluminium Extruded hospital curtain's track system with white powder coating

with all accessories as per approved sample.All required accessories and

materials must be from same manufacturer. This item is excluding Curtain.

(SVP Approved rate)

Cubical Curtain Supply and installation of water repellant, antimicrobial cubicle

curtains with high strength 18" oval net on top as per approved by architect and

EIC. Eyelets on curtains and hooks and all other required accesories must be in

SS 304. The rates are inclusive of all lead and lift,all floor levels, all heights, all

material and accessories, fixing, scaffolding, labour etc. complete in all

respects. All required accessories and materials must be from same

manufacturer. This item includes Curtain only. (SVP Approved rate)

Providing and fixing in position shower curtain approved pattern washable,

shower proof, antistatic, special mould and mildew stain resistant finish with

approx. 10% light transmittance along with aluminium track/ ss304 road of

approved makes with all accessories and necessary screws, cleats etc., as per

Interior design drawing/ Instruction of EIC for all colors and shades. The rates

are inclusive of all lead and lift, all floor levels, all heights, all material and Sqm 5.00 391.07

accessories, fixing, scaffolding, labour etc. complete in all respects.All required

accessories and materials must be from same manufacturer. (SVP Approved

Roller blind curtain

Providing and fixing of Roller blind curtain/blackout. The fabric shall be

woven from formulated platisol extruded over a polyaster yarn.The fabric

shouldl be weaved to provide subtle view of the side of the blind and should

5.1 offer elimination of glare and sunlight radiance upto a minimum of 80%.The Sqm 515.00 2,610.00

fabric shall be flame retardant. including of all accessories with Rod, roller chain

clamp, strip. (Approved rate as per E-Tender Notice No. 01 / 2024-25, tender

6 DOORS, WINDOWS & FIXED PARTITION WORKS Kg - - -

Providing and fixing aluminium handle with necessary ss screws etc .complete

as per approved make list as per drawing and sample approved by Architect

9 /EIC .Rate shall be for all heights ,all floors and all places (a) . (SVP Approved Nos. 5.00 47.80

b MORTICE LOCK DEAD BOLT WITH DOUBLE CYLINDER -

Sr.No. Approxomate Size Item description Unit Quantity Rate Amount

Providing and fixing stainless steel dead lock EC and both side Key

cylinder of 60mm size with necessary ss screws etc .complete as per

approved make list and sample approved by Architect /EIC .Rate shall NOS 1.00 750.40

be for all heights, all floors and all places . (SVP Approved rate)

c MORTICE LOCK DEAD BOLT WITH SINGLE CYLINDER -

Providing and fixing stainless steel dead lock EC and Euro profie

Cylinder with one side key and one side knob as per approved make list

with necessary ss screws etc .complete as per drawing and sample

approved by Architect /EIC .Rate shall be for all heights ,all floors and

all places . (SVP Approved rate)

d THUMB TURN & COIN SLOT -

Providing and fixing dead lock EC and Euro profile cylinder-coin and

knob 60 mm of as per approved list, drawing and sample approved by

Architect /EIC .Rate shall be for all heights ,all floors and all places .

(SVP Approved rate)

e FLOOR SPRING (HEAVY DUTY) -

Providing and fixing stainless steel adjustable floor spring as per

approved make list with necessary ss phillips head screws etc

.complete as per drawing and sample approved by Architect /EIC .Rate NOS 1.00 2,631.65

shall be for all heights ,all floors and all places . (SVP Approved rate)

Providing and fixing Manual Flush bolt for Metal doors 172mm (with

300mm length rod) as per approved make list as per drawing and

sample approved by Architect /EIC .Rate shall be for all heights ,all

floors and all places . (SVP Approved rate)

g S.S DOOR STOPPER -

Providing and fixing stainless steel hanging type floor door stopper as

per approved make list as per drawing and sample approved by

Architect /EIC .Rate shall be for all heights ,all floors and all places .

(SVP Approved rate)

h SS PULL HANDLE -

Providing and fixing Stainless Steel handles of for 22 mm dia 300 mm

long with necessary ss screws etc .complete as per approved make list

as per drawing and sample approved by Architect /EIC .Rate shall be NOS 1.00 839.13

for all heights ,all floors and all places . (SVP Approved rate)

i SS concealed HANDLE -

Providing and fixing Stainless Steel concealed handles as per approved

list with approved quality with necessary screws etc.complete for 120 NOS 1.00 614.66

mm long. (SVP Approved rate)

j SS PULL HANDLE -

Providing and fixing Stainless Steel handles of 19 mm dia 200 mm long

with necessary ss screws etc .complete as per approved make list as

per drawing and sample approved by Architect /EIC .Rate shall be for NOS 1.00 715.15

all heights ,all floors and all places . (SVP Approved rate)

k SS LEVER HANDLE -

Providing and fixing IS : 12817 marked stainless steel butt hinges with

stainless steel screws etc. complete :125x64x1.9 mm. Approved make

as mention in approved list with approved quality with necessary screws NOS 1.00 55.18

etc. complete. (SVP Approved rate)

Providing and fixing 50 cm long aluminium kicking plate of size

100x3.15 mm, anodised (anodic coating not less than grade AC 10 as

per IS :1868), transparent or dyed to required colour or shade, with NOS 1.00 145.13

necessary screws etc. complete. (SVP Approved rate)

Providing and Fixing Push plate of size 1435 x 200 mm - 1.5 mm thick -

Stainless steel satin finish - 316 L grade with SS screws as per

approved make with approved quality with necessary screws etc. NOS 1.00 1,522.36

complete. (SVP Approved rate)

One-Way Perforated Vinyl Privacy Window Film Adhesive Glass

Perforated Glass films (Sun control, Safety film, decorative, reflective

frosted, opaque film etc.) Imported lumaar make as approved by EIC.

Approved rate. (Reffrance. Repairing work at zonal office rain basera SMT 2,000.00 540.00

diff. Municipal building ) (SVP Approved rate)

R Acoustic panel (for sound proof)

Providing and fixing wall acoustical paneling using approved make

Stretch NRC Fabric, fixing with VG 25 Griper system using wood wool

board with primer of size 1200 x 600 x 15mm,Tracks ( Perimeter Track

Half wrap, mid seam whatever is required) fixed directly by stamping to

the CS25/CI45 which is screw fixed directly to the wall along the

perimeters with backing of approved make wood wool board with primer

of size 1200 x 600 x 15mm Panels with fixed horizontal/ Vertical to

the wall at 300mm c/c & Synth Polyfiber 10mm with Sound Stick

Silicon adhesive used as backing material. As per manufactures SMT 70.00 3,992.64

specification. High NRC, class A fire rating, Fire Hazard

Classification of class I or A in accordance with ASTM E-84 or

UL- 723 testing parameters, The color shade of Fabric as approved

by Architect including all accessories, material & labor all complete at

all floor and height including all lead and lift as directed by

Engineer in charge. The item to include all materiral, scaffolding,

labour etc. complete in all respects. (SVP Approved rate)

Sr.No. Approxomate Size Item description Unit Quantity Rate Amount

Extra for using ground glass (frosted or obscured on one side) instead

S of plain glass. As per SOR R&B ahmedabad city 2023-24 , item SMT 50.00 37.91

TOTAL OF PART-1(B)

Total of Part-1 (A+B)

Part-2 SIGNAGES -

Providing and fixing signages made from Acrylic sheet of minimum 6mm

thickness as per Design Provided by architect and as per instruction of EIC.

The rates are inclusive of all colors, lead and lift,all floor levels, all heights, all

1 material and accessories, fixing, labour, wastage, taxes etc. complete in all

respects.For all items approved make list shall be followed. Actual installed

quantity shall be measured and paid.and all materials must confirm latest

relevant standard. (Measurement : Item-wise including all kind of wastages of

each item used for preparation of this item) (SVP Approved rate)

a LIFT NUMBER - (Approx. size-250x100 or as per drawing) No. 1.00 234.82

b RECEPTION COUNTERS - (Approx. size-600x150 or as per drawing) No. 1.00 386.61

c DIAGNOSTIC TESTS - (Approx. size-600x150 or as per drawing) No. 1.00 386.61

d HOSPITAL SERVICES - (Approx. size-600x150 or as per drawing) No. 1.00 386.61

e PATIENT ROOM - (Approx. size-200x75 or as per drawing) No. 1.00 158.04

f BED NUMBER - (Approx. size-250x120 or as per drawing) No. 1.00 216.07

g UTILITY SERVICES - (Approx. size-600x120 or as per drawing) No. 1.00 386.61

h FLOOR MARKER - (Approx. size-200x200 or as per drawing) No. 1.00 386.61

i WARNING SIGN - (Approx. size-500x100 or as per drawing) No. 1.00 386.61

j DEPARTMENT NAME - (Approx. size-700x120 or as per drawing) No. 1.00 472.32

k INDICATION SIGN - (Approx. size-450x120 or as per drawing) No. 1.00 300.89

l DIRECTION SIGN - (Approx. size-1880x250 or as per drawing) No. 1.00 2,496.43

m INTERNAL ROOM SIGN - (Approx. size-300x100 or as per drawing) No. 1.00 300.89

n OPERATION THEATRE - (Approx. size-700x120 or as per drawing) No. 1.00 472.32

o TOILET SINAGE - (Approx. size-400x250 or as per drawing) No. 1.00 580.36

p FIRE ESCAPE - (Approx. size-200x450 or as per drawing) No. 1.00 558.04

q STUDENT ROOM - (Approx. size-200x100 or as per drawing) No. 1.00 216.07

r RESTRICTED ENTRY - (Approx. size-350x350 or as per drawing) No. 1.00 836.61

s ENTRY - (Approx. size-200x450 or as per drawing) No. 1.00 1,020.54

t EXIT - (Approx. size-200x450 or as per drawing) No. 1.00 998.21

u DRINKING WATER - (Approx. size-450x150 or as per drawing) No. 1.00 300.89

v ROOM NO.DIRECTION - (Approx. size-450x300 or as per drawing) No. 1.00 300.89

w FIRE SAFETY SIGNAGE - (Approx. size-300x300 or as per drawing) No. 1.00 453.57

x EVACUATION PLAN - (Approx. size-600x600 or as per drawing) No. 1.00 1,590.18

y FIRE STAIRCASE - (Approx. size-400x120 or as per drawing) No. 1.00 300.89

z FIRE SAFETY EQUIPMENT - (Approx. size-200x450 or as per drawing) No. 1.00 580.36

aa WARNING SIGN 1 - (Approx. size-500x150 or as per drawing) No. 1.00 431.25

Providing and fixing hanging signages made from Acrylic sheet of minimum

mm thickness and SS chain with accessories as per Design Provided by

architect and as per instruction of EIC. The rates are inclusive of all colors,

lead and lift,all floor levels, all heights, all material and accessories, fixing,

labour, wastage, taxes etc. complete in all respects and all hanging signages

should be hang from true ceiling only.For all items approved make list shall be

followed. Actual installed quantity shall be measured and paid.and all materials

must confirm latest relevant standard. (Measurement : Item-wise including all

kind of wastages of each item used for preparation of this item) (SVP Approved

a EN ENTRY (SUSPENDED) - (Approx. size-450x200 or as per drawing) No. 2.00 754.46

b EXT EXIT (SUSPENDED) - (Approx. size-450x200 or as per drawing) No. 2.00 754.46

Providing and fixing signages made from modular anodized Aluminium profile,

minimum 0.8mm thick Acrylic sheet with Vinyl print, mounted with stud / Screw/

Double Sided Tape as per Design Provided by architect and as per instruction

of EIC. The rates are inclusive of all colors, lead and lift,all floor levels, all

heights, all material and accessories, fixing, labour, wastage, taxes etc.

complete in all respects.For all items approved make list shall be followed.

Actual installed quantity shall be measured and paid.and all materials must

confirm latest relevant standard. (Measurement : Item-wise including all kind of

wastages of each item used for preparation of this item) (SVP Approved rate)

CONSULTATION ROOMS - (Approx. size-3600x2250 or as per drawing)

DEPARTMENT DIRECTORY - (Approx. size-2600x3550 or as per drawing)

DEPARTMENT DIRECTORY - (Approx. size-3600x1800 or as per drawing)

d FD FLOOR DIRECTORY - (Approx. size-3600x1200 or as per drawing) No. 5.00 49,676.79

e ECI EMERGENCY CODE INFORMATION No. 5.00 4,600.00

Providing, cutting and fixing in position letters made from 304 grade SS sheet

1" Embosed, waterproof 3SMD MODULES BACKSIDE LETTERS WITH LED

DRIVERS, LETTERS MOUNTED WITH STUD ON WALL for following height of

approved makes as per Architectural drawing/ Instruction of EIC for all colors

4 and shades. The rates are inclusive of all lead and lift,all floor levels, all heights, -

all material, fixing on any type of surface, scaffolding, labour, Wastage etc.

complete in all respects. Actual installed quantity shall be measured and paid.

(SVP Approved rate)

a 250 (9.75") mm Height Font 1.00 2,783.04

b 300 (12") mm Height Font 1.00 2,783.04

Providing and fixing SS 304 logo of AMC with vinyl print and LED. The rates are

inclusive of all lead and lift,all floor levels, all heights, all material, fixing on any

type of surface, scaffolding, labour, Wastage etc. complete in all respects.

5 Actual installed quantity shall be measured and paid. No. 1.00 7,427.68

AMC LOGO (600 DIA.) (SVP Approved rate)

Sr.No. Approxomate Size Item description Unit Quantity Rate Amount

Provind, cutting and fixing extrerior grade vinyl on any surface having average

0.105mm thickness with acrylic solvant type adhesive as per drawing