CONSTRUCTION OFNEW BUILDING OF MUNICIPAL COMMISSIONER RESIDENCE DISTT. SURENDRANAGAR (2nd Attampt)

Surendranagar Municipal Corporation

NAME OF PROJECT : Construction of New Building of Municipal Commissioner Residence Distt. Surendranagar

Bill of Quantities

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Contour survey work for prepaing contour maps by taking cross-section at

every 30M. intervals including all, labour materials and instruments. This

item includes the submission of autocad file of total site survey, etc

complete as per detailed, directed & approved by the consultant / EIC

Carryout Soil Investigation work including exploratory drilling of 150 mm dia

borehole in all sorts of soil& Rock up to 10m depth from G.L, collecting

undisturbed samples at an interval of 1.5 m. depth, determining depth of

water table etc. Conducting necessary laboratory tests for all type of

classification and determination of soil parameters necessary for

2 determining pile capacity like density, shear and consolidation parameters Job 1.00 44,844.00

etc., including submission of report in three copies covering investigation

data and recommendation for SBC etc. all as per specification at required

Excavation for foundation upto 1.5 m depth including sorting out and

3 stacking of useful materials and disposing off the excavated stuff upto 50 Cmt 873.00 117.08

Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff up

4 to 50 Meter lead.(C) Hard Murrum, etc. complete as per detailed & directed Cmt 582.00 273.54

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

5 disposited layer by ramming and watering. Cmt 1200.00 130.39

Filling in foundation and plinth with murrum or selected soil in layers of

6 20cm. thickness including watering, ramming and consolidating etc. Cmt 250.00 282.02

complete. (more than 10 ton)

Carring out plinth treatment to post construction /existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent

is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1%

7 concrentration inclusive of one litre chemical emulsion appication at the rate Smt. 271.00 56.63

of 5 Litre chemical /Sqm of sur face is recommended as per I.S

Providing and laying cement concrete 1:2:4 (1- Cement : 2-Coarse sand : 4-

8 graded stone aggregates 20 mm nominal size) and curing complete Work in Cmt 61.00 3,631.49

(A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

9 reinforced concrete work in (A) Foundations, footings, Base of columns and Cmt. 149.00 4,626.81

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

10 reinforced concrete work in columns below plinth Cmt. 10.50 5,214.63

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at Ground Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

ARCHITECT: ARG Creation Pvt. Ltd. 1 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at First Floor lvl. & Parapet level etc., for any type of cross

section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

13 reinforced concrete work in Beams upto floor two level: PLINTH BEAM / Cmt. 35.00 6,177.16

Ground beam / Tie beam

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

14 reinforced concrete work in Lintels / Copping upto floor two level. Cmt. 10.00 6,120.60

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

15 reinforced concrete work in Chajjas upto floor two level. Cmt. 1.00 6,832.65

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

16 reinforced concrete work in © Slabs upto floor two level. : Grade slab Cmt. 34.00 4,749.02

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in © Slabs, landing, shelves, Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level. : Staircase

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

18 work in © Beams upto floor two level. . : GROUND FLOOR BEAM Cmt. 35.00 6,612.47

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

19 work in © Beams upto floor two level. . : FIRST FLOOR BEAM Cmt. 31.50 6,652.05

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

20 work in © Beams upto floor two level. . : Terrace BEAM Cmt. 2.50 6,691.63

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced concrete

21 work in (C) Slabs upto floor two level. :Ground floor Slab Cmt. 41.00 6,445.82

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced concrete

22 work in (C) Slabs upto floor two level. :First floor Slab Cmt. 34.50 6,485.40

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced concrete

23 work in (C) Slabs upto floor two level. : Terrace floor Slab Cmt. 5.50 6,524.98

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

24 binding and placing in position complete upto all floor level. kg 40885.00 76.21

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

25 Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Cmt. 1.00 4,051.78

ARCHITECT: ARG Creation Pvt. Ltd. 2 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for brick work

in superstructure above plinth level upto floor two level (B) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for brick work

in superstructure At First Floor (B) Conventional

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in cement mortar 1:5 ( 1- Cement : 5 -

coarse sand ) in foundation and plinth (B) Conventional Extra for half brick

masonry in superstructure above plinth level upto all floor level. (B)

28 Conventional Smt 42.00 641.16

Supplying and fixing of GRC Jharokha Type 1 as per Image & specification

29 and complete as per detailed drawing & Directed by EIC. Nos. 10.00 40,920.45

Supplying and fixing of GRC Column Type 1 as per Image & specification and

29 Size and complete as per detailed drawing & Directed by EIC. Nos. 48.00 7,373.00

Supplying and fixing of GRC Dome type 1 as per Image & specification and

29 Size and complete as per detailed drawing & Directed by EIC. Nos. 1.00 98,681.04

Supplying and fixing of GRC Railing as per Image & specification and Size

29 and complete as per detailed drawing & Directed by EIC. Smt 41.00 4,890.42

Supplying and fixing of GRC Moulding 1 exact as per Image & specification

29 Size and complete as per detailed drawing & Directed by EIC. (patta) Rmt 85.00 1,559.44

Supplying and fixing of GRC Moulding 2 (Window) exact as per Image &

29 specification Size and complete as per detailed drawing & Directed by EIC. Nos. 412.00 858.50

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size

applying between the RCC and masonry junction in proper line, level and

plumb with all material, labour, tools, tackles and equipment. Including

providing and fixing the jali with nails, etc complete as directed by the site-

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and

31 finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Smt 542.00 163.85

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering above first floor upto second

floor level and finished even and smooth in (ii) Cement mortar 1:4 (1-

32 cement :4-sand) Extra over items 58 to 64 for finishing with a floating coat Smt 535.00 212.06

of neat cement slurry.

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

33 (ii) Cement mortar 1:4 (1-cement :4-sand) Ground floor level Smt 187.00 138.71

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

34 (ii) Cement mortar 1:4 (1-cement :4-sand) First floor Smt 184.00 186.92

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete as approved and directed by Consultant / EIC.

ARCHITECT: ARG Creation Pvt. Ltd. 3 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Brick Tile claddig work with common burnt clay F.P.S. (non modular) tile

bricks of class designation 10 using tile adhesive of approved brand

including making Horizotal and vertical grooves of 8-10mm wide with

36 grouting and coating complete as directed eingineer-in-charge in Smt 476.00 1,838.10

superstructure above plinth and upto floor five level.

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished at

all exposed Surface, Pre-moulded and pre-polished, machine cut Granite of

any colour and shade, & finish, as per detailed by architect /Consultant for

flooring, dado skirting, cladding, steps and risers, kitchen platforms, vanity

counters, window & Door sills , fascias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick mortar 1:4 (1 acid

proof cement : 4 coarse sand). And In dado/skirting on In dado/skirting on

12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand), joints treated

37 with white cement, mixed with matching pigment, epoxy touch ups, Smt 106.00 3,504.70

including BSpacer tape 6.4 mm thick x 4 TO 6 mm as per detailed groove,

rubbing, curing, moulding and polishing to edges to give high gloss finish as

per concept etc. complete at all levels.

Providing and fixing 18 mm thick gang saw cut, Ruff [Send-blasted-

LAPORTA] polished in pattern & at all edges should be molded in rquired

finish, Pre-moulded and pre-polished, machine cut Granite of any colour

and shade, & finish & texture, as per detailed by architect / Consultant, for

flooring, dado skirting, cladding, steps and risers, kitchen platforms, vanity

counters, window sills , fascias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick mortar 1:4 (1 acid

proof cement : 4 coarse sand). And In dado/skirting on In dado/skirting on

38 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand), joints treated Smt 1.00 4,146.56

with white cement, mixed with matching pigment, epoxy touch ups,

including Spacer tape 6.4 mm thick x 4 TO 6 mm as per detailed groove,

rubbing, curing, moulding and polishing to edges [Ruff [Send-blasted-

LAPORTA] polished] to give high gloss finish as per concept etc. complete at

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

39 existing flooring by adhesive material including dismentaling of existing Smt 0.00 1,204.20

flooring and jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light shade / Dark Shade

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

40 flooring and jointed with color cement slurry including finised with flush Smt 1.00 1,397.83

pointing & cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in skrting

41 risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- Smt 126.00 1,141.45

coarse sand) and jointed with white cement slurry

Providing and fixing 0.70 meter wide sandwich type platform including

supplying and fixing granite stone 18 mm thick mirror polished stones in

top and side position and vertical strip at front over 25 mm thick polished

kota stone platform fixing in top and sides and intermediates supports

42 fixing with cement mortar and adhesive and finishing including making Smt 10.00 7,910.56

recess for Kitchen/ Laboratory sink etc. complete as approved and directed

by Consultant / EIC.

ARCHITECT: ARG Creation Pvt. Ltd. 4 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing wood work in frames of Size 12.5 x 10 Cm. for doors, windows,

clerestory windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length Incl.

Providing and fixing 35 mm thick (or as specified) ISI marked flush door

shutters conforming to IS : 2202 (Part I) decorative type, core of block board

construction with frame of 1st class hard wood, with 1mm. thk, ISI marked

designed laminate in any finish on both faces of shutters., slit openings with

bidding Patti & 6mm thk designed acid wash glass,. Stainless Steel butt

43 hinges [125x65x2.5mm. IS1281712] with necessary screws, using branded Smt 31.00 7,949.10

S.S. matt /glossy / platinum finished accessories, Colour / polishing all

bidding parts, and also incl. with all Material, labour, tools, tolerance,

scaffolding etc. complete as per concept /direction and approved by

Architect, and directed by Engineer-In-Charge.

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections (JINDAL-

DOMAL Series), hI-perfomance Sliding/ Openable window / Ventilation with

Required thick glass of Saint Gobain or equielent, is used for Aluminum Hi-

Profile Section with necessary accessories and with additional shutter with

Stainless Steel Mosquito net. [In Opening Position always one of Mosquito net

shouter should be in Close Position], captive bead, extremely difficult to

remove once glazed, high performance weather stripping, internal wedge

gasket, Bottom, side and top section including necessary filling up the gaps

at junctions, with required EPDM rubber/ etc. and ISI ebco make,"Lx.

Premium" Required Finish door fixture Accessories As per Architect Concept,

High security interlocking bead, Sheet membrane flashing , 2" over jamb

flashing, New Blocking with new backer rod and sealant, channel glide with

runner, slide fold hinge when ever need of sufficient capacity, with warranty,

all types of material, labour, transportation, tools tolerance and matching

required level with Flooring etc. complete as per Architect concept and as

per detailed by Architect / consultant & Directed by EIC.

Providing and fixing hydraulic door closer of approved size and make as

45 directed engineer in charge. all lift, level and leads. Each. 4.00 646.40

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround, square

46 or round bars with round headed bolts and nuts or by screws (A) Plain Grill. Kg 414.45 114.44

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304 grade

using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia SS pipe

of 16 gauge, round balustrade of 38mm [50mm 16G Grade 304 with glossy

finish consisting of 38 NB or nearest size vertical posts 900 Height at

maximum spacing 900c/c with suitable cups at bottom and top rail of 50 NB

or nearest size & intermediate rails of 20 NB or nearest size etc complete]

with complete assembly of SS studs to house the horizontal 16mm pipes and

top handrail, bend and coupler to be used as per architectural detail

drawings for the railing in parapet, stair etc. including fabricating, hoisting,

47 fixing in position with angle cleats, holdfast etc. in RCC or masonry in true Rmt 25.00 3,563.68

line level and plumb, including complete assembly, including matt polishing

and buffing complete, including scaffolding etc. complete as directed by

EIC.(Actual length of stair railing shall be measured at site & same shall be

paid. No wastage should be measured or paid.)

Providing and fixing in position S.S. daso by providing top 50 mm dia stain

less steel pipe rail with starting and end point vertical post of 50 mm dia

with wall/column including bending welding and fixing for staircase and

balcony as directed.(testing is required of s.s 304) for all floor.

ARCHITECT: ARG Creation Pvt. Ltd. 5 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth & Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on undecorated wall surface to

49 give an even shade including throughly brushing the surface free from Smt 951.00 119.49

mortar droppings and other foreign matter and sand papered smooth.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth & Ceiling painting (two coats) with plastic

emulsion paint of approved brand and manufacture on undecorated Ceiling

surface to give an even shade including throughly brushing the surface free

50 from mortar droppings and other foreign matter and sand papered smooth. Smt 371.00 122.67

Extra over item 57 for painting with plastic emulsion paint of approved

brand on ceilings and sloping roofs.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

51 the surface to remove all dirt, and remains of loose powdered materials.etc Smt 51.00 114.53

Pro. And fixing single layer water proof gypsum board 12.5 mm thick

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center

to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c

and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at

52 edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt Sqm 370.00 606.95

connecting cleat,joining compound top coat on ceiling incl.making

necy.opening for light fitting,diffuser etc. comp. as per detail drawing as

Providing and laying broken chine mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

53 using white cement including rounding off junctions and extending them Smt 230.00 747.29

upto 15 cm along the wall,clearing with water and oxalic acid etc. as

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane (ELASTOROOF PU– Sunanda speciality pvt coating ltd

or Equivalent) over uniform surface of slab. Apply 2 coats at dosage of

kgs per sqm to achieve the required minimum DFT of 1.5mm. It should

following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

54 3. Elongation % ≥ 700% Smt 0.00 979.14

4. Dosage 1.2 - 1.5 kg/m2 in two coats

5. Tack Free Time 24 - 48 hrs

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

ARCHITECT: ARG Creation Pvt. Ltd. 6 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Painting two coats (excluding priming coat) on new steel and other metal

surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign

matter.Painting two coats (excluding priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or

shall be concealed in wall as directed necessary fittings such as bends,

56 shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent, Rmt 25.00 831.22

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC. (A) 160mm dia. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR type

B pipe confirming to IS 13592-1992 with one end plain & other end socket

with rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or

57 shall be concealed in wall as directed necessary fittings such as bends, Rmt 54.00 835.15

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC.

Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

ARCHITECT: ARG Creation Pvt. Ltd. 7 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing & Fixing gun metal check or no return full way wheel valve etc.

63 complete as per the instruction of EIC. (C) 25 mm. Dia Each. 10.00 420.63

Providing & Fixing gun metal check or no return full way wheel valve etc.

64 complete as per the instruction of EIC. (E) 40 mm. Dia Each. 10.00 663.43

Providing and fixing screw down bib taps of following size.(A) Brass screw

65 down bib tap polished bright. (i) 15mm dia. Each. 15.00 184.98

Providing and fixing brass screw down stop tap.(C) 25mm dia.

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm diameter

with 150 mm X 150mm S.S.jali for floor or nahni trap of the following

nominal diameter of self cleansing design with C.I screed down or hinged

67 grating including the cost of cutting & making good the walls, as per Each. 18.00 525.83

detailed, directed & approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber

and water tight C.I. cover with frame of 300mm x 300mm size (inside) with

68 standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. Each. 5.00 1,279.40

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal

dimensions, total weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls & bed concrete for (i)

Inside dimensions 455mmx 610mm & 450mm deep for single pipe line. etc.

complete as per detailed, directed & approved by the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation

concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )

inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand ) finished

with a floating coat of neat cement & making channels in cement 1:2:4 mix (

1 cement : 2 coarse sand :4 stone aggregate 20mm nominal size ) finished

smooth complete including curing & testing… ( I ) inside 900mm x 1200 mm

& 1.5 m deep including R.c.c. cover with frame size 560 mm diameter ( A )

70 with 230mm thick walls of brick masonry using brick having crushing

strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement : 5 coarse sand ),

(2) B type depth 1.50 Meter for 150mm diameter sewer.. etc. complete as

per detailed, directed & approved by the consultant / EIC.

Providing & Fixing white colour, Vitreous china, under / Over Counter wash

basin with single hole for pillar type with Cl or MS brackets painted white

including cutting holes, ranking bolts for Fixing & marking good the same,

including Fixing C.P. Brass waste coupling 32mm dia & Bottal trap & 15mm

dia pillar tap, Bottle Trap, as approved, capstan head C.P. screwed down high

pressure with screw shank & back nuts & rubber plugs, 15mm dia brass stop

cock (50/75mm p.v.c. Drain connection pipe, Water Connection Pipe of

required Size, & testing the same for leak proof, etc. with all material &

labours to complete this job in all respected manners, etc. complete as per

detailed & approved by the consultant & directed by EIC.

ARCHITECT: ARG Creation Pvt. Ltd. 8 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing wash down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and cover for wash

down water closer with C.P. brass hinges, C.P. brass toilet paper holder, Jet

72 Spray, Health Fauset Heavy duty with hook with fitting, Metropole, Incl. Each. 5.00 5,965.72

Connection and rubber buffers. (A) Vitreous China., etc. complete as per

detailed & approved by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior glass

mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to wooden

plugs with C.P. brass screws & washers, etc. with all material & labours to

73 complete this job in all respected manners, etc. complete as per detailed & Each. 5.00 833.73

approved by the consultant & directed by EIC

Providing & Fixing pillar tap, screw down high pressure with screws, shanks

74 & back nuts. (i) 15mm dia. Each. 10.00 308.73

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets,

75 painted white including cutting holes in walls and making good the same but Each. 1.00 2,280.27

excluding fittings.

Providing erecting and fixing double coated ISI water tank of required

76 capacity each with all necessary fittings and connection etc. complete on Ltr. 1.00 3.95

Lowering of Submersible pump set complete with required nos and size of

Column pipe ( GI / HDPE pipe) erected by means of proper chain pulley block

& pipe wrenches after checking of threads of each pipe with coupling to take

77 the load of the pump set and pipe assembly filled up with water with trail Job 1.00 2,932.79

testing, wiring GEB test report.

Single phase submersible pump motor set with control panel. (c) Motor

78 rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head Set 1.00 21,694.80

suitable for 32 mm dia. delivery pipe, Cat Q- II

79 Flat PVC cable size 4.0 sq.mm Mts. 50.00 85.85

80 HDPE pipe - 40 mm dia. Mts. 50.00 126.25

Providing and fixing in position U.P.V.C. cowl went to pipes. (C) 100mm dia

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front plate modules erected on

82 / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling Pt. 95.00 485.81

rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan regulator mounted

and accessories with earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

83 textured/metallic/white front plate modules erected on / in wall / ceiling as Pt. 76.00 674.68

per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

ARCHITECT: ARG Creation Pvt. Ltd. 9 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

84 erected with following type of accessories.[I] For 6A Plug and 6 a switch with Pt. 38.00 510.05

2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board.(f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

85 erected with following type of accessories.[II] For 16A Plug and 16 amp Pt. 57.00 745.38

switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (7) Blank Plate Single Cat.III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured /metallic/white front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

Supplying & erecting approved make LAN cable of following size in existing

88 pipe as per direction Mtr 285.00 47.47

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed.(a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed.(b) 25 mm

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge.(8) Computer RJ-45 socket

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

92 per site situation directed by Engineer In charge. (3) Two Pin/RJ-11 Ea. 5.00 210.08

Telephone Socket [B] For Two Gang Cat.III

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary

connections as directed. 1 no. 6A/16A universal plug-switch combined.3

nos. 6A Switch 3 nos. 6A 5 pin Plug .For Modular Type Accessories Cat.III

ARCHITECT: ARG Creation Pvt. Ltd. 10 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (4) TV Co-axial Socket

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

95 LED driver efficiency > 85 % Ea. 5.00 312.09

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (H) Mirror Light

Watts, wall mounted minimum 1 feet long

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD <

Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

96 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Tube Light with

integral driver (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % (

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

97 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may Ea. 57.00 758.51

select any wattage capacity between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (iv) 22-24 watts, Surge-2 KVCat-lll

ARCHITECT: ARG Creation Pvt. Ltd. 11 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % (

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

98 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may Ea. 95.00 1,794.77

select any wattage capacity between the ranges shown.) (B) LED Panel Light

with provision for Plane front frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV.CAT III

Supplying & erecting approved make low noise decorative exhaust fan having

99 square frame ABS body with inbuilt lowers & square frame. 250mm with Ea. 5.00 1,366.53

1350 RPM Cat.II

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy &

cm. down rod erected with earthing.(Make shall be approved by Engineer in

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

101 box / Heavy Duty PVC box complete erected concealed in Ceiling with Ea. 10.00 108.07

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

103 down rod erected duly painted for fan complete with proper insulation Mtr. 10.00 108.07

without leakage and earthing.

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor, condensing unit,

104 water tank surrounded by evaporating, coil, thermostats, relay etc.complete Ea. 1.00 55,893.40

with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump capacity

80 psi, mention with 40 psi inline type post carbon filter auto low & high

pressure switches with following size of storage tank & LPH capacity &

erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump

Providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

106 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Ea. 10.00 112.11

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed (i)

Amps.DP Cat. III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

108 Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Ea. 1.00 737.30

having following capacity (c)63 Amp Cat.III

ARCHITECT: ARG Creation Pvt. Ltd. 12 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

to be used) suitable for (A) single phase incoming and horizontal single

phase outgoing (a) single door (IP-30) (i)4 way

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

to be used) suitable for (B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI) (b) sheet steel double door (iii)8

Providing and erecting Approved make Earth fault Relay suitable to mount

with inter connection suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as following along with shunt trip

111 220V AC. with all internal connections & complete erected in existing Ea. 1.00 5,415.62

M.S.housing.. (3) 250 A -400 A , CT Ratio 1/400

Providing and erecting metallic vitrified danger notice board as per language

112 suggested by engineer incharge for MEDIUM VOLTAGE installation to be Ea 2.00 69.69

erected as per IS-2551.

Pole 415V change over switch interior for panel mounting with operating

113 mechanism A.C.23 duty confirming to IS for . (F)400A Cat-lll Ea 1.00 22,255.35

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size.(A) with medium class Rigid PVC pipe and

accessories.(b) 2 wire 2.5 sq. mm (FOR COMPUTER BOARD and SWITCH

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

115 insulated stranded wire of green colour for earth continuity of following Mtr 285.00 112.11

size(A) with medium class Rigid PVC pipe and accessories.(a) 2 wire 4 sq.

mm (FOR 15/16A SS & AC)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables (F) 3 1/2 core

Sq. mm ( 70 Sq. mm 1/2 core) (Meter To Main Supply)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or

117 in existing trench / pipe at road crossing or floor of following size of Mtr 25.00 987.78

cables. (B) 4 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

118 clamps or in existing trench / pipe of following size of cables (C) 4 core 10 Mtr 20.00 140.39

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables (E) 3 1/2 core 95 Sq.

mm ( 50 Sq. mm 1/2 core) (FOR HVAC PANEL)

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with

120 out going tails, insulating tape etc for following size of cables. (E) 3 & 1/2 Ea. 6.00 140.39

core 120 Sq. mm

ARCHITECT: ARG Creation Pvt. Ltd. 13 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (D) 35/50 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (G) 120 Sq.mm.

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if

required.(b) One wire 1.50 sq. mm ( FOR PANEL INTERNAL WIRING)

125 (c) One wire 2.50 sq. mm ( FOR PANEL INTERNAL WIRING) Mtr 22.00 27.27

126 (e) One wire 6.00 sq. mm ( FOR PANEL INTERNAL WIRING) Mtr 25.00 56.56

127 (f) One wire 10.00 sq. mm ( FOR PANEL INTERNAL WIRING) Mtr 25.00 91.91

Making trench in soft soil of suitable width of 90 cm deep for laying cable or

128 locating the fault all over the run and back filling the same and making the Mtr. 50.00 55.55

surface as normal ground.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground / road surface for enclosing cable (A)50 mm outer

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground / road surface for enclosing cable(C))90 mm outer

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

131 Submersible copper cable approved make of following Size. (D) 3 Core x 6 Mtr. 75.00 172.71

Sq. mm. (FOR WATER TANK)

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

132 Submersible copper cable approved make of following Size. (E) 3 Core x 10 Mtr. 100.00 295.93

Sq. mm. (FOR WATER TANK AND BORE)

ARCHITECT: ARG Creation Pvt. Ltd. 14 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having

200- 250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 • / meter testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

133 Earthing compound should be capable to retainmoisture for long time Ea. 4.00 5,760.03

Necessary test report must be submitted.(c) For Electrical Installation

covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation, SCADA) i.e independent (b)For

Electrical installation up to 11 KV in normal soil. Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg

Providing and erecting required size HOT deep Galvanised iron strip for

134 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using Kg 12.00 77.77

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Supplying and erecting approved make set of indicator lamps of LED type

136 lamp, lens cover, Bakelite holder complete erected with necessary Ea. 10.00 43.43

Supplying & erecting approved make Automatic liquid level controller 6A.as

per instruction of Engineer in charge on site complete with wiring connection

with existing wires , with copper conductor from pump to upper and lower

137 tank.(Size Not less than 1.5 Sq MM) from pump to upper and lower tank with Ea 1.00 2,355.32

ISI marked Rigid PVC Pipe.

Providing and erecting Inverter based approved make split air-conditioning

unit consisting of condensing unit with variable speed fan motor, inverter

type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

138 tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas Nos 2.00 41,312.00

charging and 15A plug top & Remote Control & MS Stand) with necessary

core cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (B) for 1.5 ton

Providing and erecting Inverter based approved make split air-conditioning

unit consisting of condensing unit with variable speed fan motor, inverter

type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

139 tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas Nos 8.00 51,155.00

charging and 15A plug top & Remote Control & MS Stand) with necessary

core cutting. (1)For ISEER Range (KWH/KWH)(3.1 to 3.99) (C) for 1.7 to 2 ton

Supplying & installing MS standard type stand mounting for outdoor unit of

140 Split A.C. upto 4 TR capacity erected with necessary hardware materials as Nos 10.00 739.00

Supplying and erecting insulated pair of soft copper tubing open or

141 concealed including power and control cable,necessary PVC drain pipes for RMT 100.00 956.00

Split AC machine up to 4 TR capacity

ARCHITECT: ARG Creation Pvt. Ltd. 15 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and installing MS angle , powder coated / Painted standard type

of wall/floor stand mount for outdoor unit of split AC of following capacity,

142 erected with necessary hardware materials as directed. Nos 20.00 1,348.00

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber

143 insulation. (E) 19 mm dia. RMT 150.00 67.00

Total Amount Rs. =

Total Amount Rs. =

Rupees One Crore Thirty Five lakh Sixty Six Thousand Ten and zero paisa.

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in

figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by

1 the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal

ARCHITECT: ARG Creation Pvt. Ltd. 16 of