Partition Work of New Building for IBP/ARP Plant Managers

Partition with Marine Plywood (BWP) IS 710 grade

Fabricating and fixing at site half partition (double skinned) of height 1200 mm and width 75 mm to form separation between work tops/cabins. A frame work of height 1200 mm is made using 19 mm marine plywood sections with grid of average spacing 600 mm x 600mm in between vertical or horizontal members framework is screwed on to floor/wall using steel screws of suitable size. Necessary cuttings in frame is to be provided to draw cable conduits. 9 mm thick marine plywood or flexy plywood is fixed on to both sides of the frame work with joints perfectly finished without any projection at joints.1 mm thick laminate (merino/greenlam/century ply or other apporved brands) as specified in the list of approved brand is pasted on both side as per the detailed specification in drawing. 15 mm x 80 mm decorative beechwood/ pinewood/ teakwood or equivalent wooden beeding/liping is fixed over top and at cut edges. Necessary grooves,cuttings and inlays should be given as per the drawings. Cuttings for fixing electrical boxes/switches should be provided where ever necessary. A skirting is to be fixed on to it at floor level as per detail. All exposed wooden surfaces are polished with melamine matt/clear after applying necessary base preparations, including concealing the screw heads.Drawings attached.

Wooden Skirting

Fabricating and fixing at site on to wall/ paneled wall/ partition or counters at base a beechwood/ pinewood /teakwood or equivalent wooden skirting of size 75 mm x 6 mm with top detailed as per drawing and fixed on to wall or partition base using suitable size brass screws or headless brass nails and along with glue. The joints of the skirting should be neat and no visible difference or overlap should be seen. The surface is to be polished with melamine gloss/semi gloss after preliminary preparation of the surface.

Wall Paneling with Marine Plywood (BWP) IS 710 grade

Fabricating and fixing at site wall paneling of height 1200 mm on frame work of height 1200 mm is made using 19 mm marine plywood sections with grid of average spacing 60 cm x 60 cm in vertical and horizontal screwed on to wall using steel screws of suitable size. 9mm tk marine plywood /flexy plywood is fixed on to the framework with joints perfectly finished without any projections at joints. 1 mm tk laminate (merino /greenlam /century ply or other apporved brands) as specified in list of approved brands is pasted as per the detail specification in drawing. 15 mm x 85 mm or matching size decorative beechwood/pinewood /teakwood or equivalent wooden beeding/liping is fixed over top and at cut edges. Necessary grooves, cuttings and inlays should be given as per drawing. A skirting is to be fixed on to it at floor level as per detail. All exposed wooden surfaces are polished with melamine matt/clear after applying necessary base preparations, including concealing the screwhead. Drawings attached.

Table type 1 (Size 1800 x 750mm)

Fabricating and supplying at site ,office table for the main counters made of 19 mm thick laminated marine plywood (BWP grade) IS 710 grade boxing as shown in dwg .The shutters ,shelves shall be of 18 mm thick MPW laminate and drawers fixed on SS drawer channel, as per the size specified and in site finished with 1mm laminate and edges finished with 2mm /1mm thick PVC edge banding tape and fixed with SS handles, locks of approved brands, supporting clips etc. and provided with pvc bushes at bottom concealed. The top shall be of 19 mm thick marine plywood with front, rear and sides finished with 2mm thick PVC edge banding tapes of matching shade. Size of table 1800 x 750mm

Table type 3 (Size 1200 x 450mm)

Fabricating and supplying at site, side table for the main counters made of 19 mm thick laminated marine plywood (BWP grade) IS 710 boxing as shown in dwg,. The shutters, shelves shall be of 18 mm thick MPW laminate and drawers fixed on SS drawer channel, as per the size specified and in site finished with 1mm laminate and edges finished with 2mm /1mm thick PVC edge banding tape and fixed with SS handles , locks of approved brands, supporting clips etc. and provided with pvc bushes at bottom concealed. The top shall be of 19 mm marine plywood with front, rear, and sides finished with 2mm thick PVC edge banding tapes of matching shades. Size of table 1200 x 450mm. Drawings attached.

Table type 2 (Size 1200 x 650mm)

Fabricating and supplying at site, office table for the main counters made of 19 mm thick laminated marine plywood BWP grade: IS 710, as shown in drawing. The shutters, shelves shall be of 18 mm thick MPW laminate and drawers fixed on SS drawer channels, as per the size specified and in site finished with 1 mm laminate and edges finished with 2mm/1mm thick PVC edge banding tape and fixed with SS handles, locks of approved brands, supporting clips etc and provided with pvc bushes at bottom concealed. The top shall be of 19 mm Marine plywood with front, rear and sides finished with 2mm thick PVC edge banding tapes of matching shade. Size of table 1200x 650mm. Drawings attached.

Skilled labour / Electrician for miscellaneous works

Supply of Skilled labour/ Electrician for any miscellaneous works

Providing and installing Roller blind

Providing & Fixing the Duplex (Zebra) roller blinds of brands approved brands and colour, design, size etc. The Duplex(Zebra) blind shall filters the light into the room using two phase system that switches opaque to sheer. The blind shall be operated via a chain system, strip of dim out; sheer fabrics shall be aligned to form a full sheer blind,a full dim out blind or a mixture of two. The detailed specification of the Duplex (Zebra) blind shall be Fabric:100% polyester plain/ribbed fabric of approved colour/shade. Pattern: Repeat pattern 8-15 cms solid 5- 10 cms sheer. Hardware: Control Unit:Made up of high strength reinforced plastic and clutch shall be of wrap spring design. High carbon steel spring shall be provided to transmit motion from driving to driven members of clutch mechanism & shall be operated by endless beaded chain. Idler: Idler shall be made up of high strength reinforced plastic consisting of a centre shaft, it is mounted on the bracket by using a plastic lock.The metal sleeve inside the plastic lock shall provide bearing surface for the centre shaft which rotates freely, providing smooth, quite & long wearing operation. Head Rail: It shall be made up of extruded aluminium, powder coated. Control unit ; Idler shall be mounted on the head rail with powder coated MS brackets. Roller Tube:It shall be made up of extended high strength aluminium anodized alloy, control unit; Idler shall befixed to the either ends of the tube. The fabric of the blind is fitted to the tube with heavy duty adhesive tape. 160 Sqft Bottom rail: It shall be made up of round or triangular extruded aluminium section, and connected using high quality ransparent/coloured end caps through which the fabric runs Operating Chain: It shall be an endless chain made up of 4-5 mm plastic beadsmoulded on 2-3 mm thick polyester chord with pitch of beads 5-7 mm. The chain drives the sprockets of the control unit to close or open the blind. Installation: The Duplex (Zebra) roller blind shall be installed on brackets & clamps fixed over the wall or ceiling. The brackets, clamps shall be made up of high strength alloy or zinc plated mild steel.

Interlock tile work with combined sizes of blocks 6 inch, 8inch and 12 inch sizes

Providing and laying 60 mm thick factory made cement concrete interlocking paver block with size of 12"x6" or with a mix of size 6"x6" and 12"x12", M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design; shape, laid in required color and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the pattern approved by Engineer-in-charge.