MAINTANANCE AND REPAIRING OF PUBLIC TOILET IN T.P.S.NO.03 (KARANJ), T.P.S.NO.08 (UMARWADA) AND T.P.S.NO.34 (MAGOBH-DUMBHAL),.P.S.NO.53 (MAGOBH-DUMBHAL), AND T.P.S.NO.64 (DUMBHAL - MAGOBH) IN EAST (VARACHHA) ZONE-A

SR. NO. DESCRIPTION QTY SOR 24-25 UNIT AMOUNT

Excavation for foundation includ.sorting out & stacking of useful materials & disposing of the

excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp. (A) Loose or Soft soil

SOR (24-25) - Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 Mt. depth 10 123.13 C.M.

Excavation for foundation includ.sorting out & stacking of useful materials & disposing of the

excavated stuff upto 50 mt. Lead & all lift, watering etc. Comp. (A) Loose or Soft soil

SOR (24-25) - Executed With Manual Labours

(1) Up to 1.5 Mt. depth 10 212.52 C.M.

SOR (24-25) - Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded stone agg. 40 m.m Nominal

PG.NO.1, IT NO. 03 size )& curing comp. excl. cost of from work in :Foundation & Plinth

SOR (24-25) - Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8 graded stone agg. 40 mm

PG.NO.1, IT NO. 04 nominal size) & curing comp. excl.cost of form work in (A) Foundation and Plinth

SOR (24-25) - Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m Nominal

PG.NO.1, IT NO. 05 size)&curing comp. excl. cost of form work in :(a) foundation & Plinth

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone agg.

6 mm nominal size)& curing comp. Includ.cost of form work but exclu. Cost of reinforcement for 2 4,250.50 C.M.

reinforced concrete work in : (A) Foundation, footing, Base of columns and Mass concrete.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

7 layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and 10 136.92 C.M.

SOR (24-25) - Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness

PG.NO.1, IT NO. 11 including watering, ramming and consolidating etc. complete.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded stone

agg. 20 mm nominal size) finishing smooth curing etc. comp. Incl.. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in :

(1)Having c/s area up to 0.08 s.mt- Ground Floor 5 12,844.32 C.M.

First Floor 1 12,885.28 C.M.

Second Floor 1 12,926.24 C.M.

Terrace (third) Floor 1 12,967.19 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt - G.F 1 11,166.97 C.M.

First Floor 1 11,207.92 C.M.

Second Floor 1 11,248.88 C.M.

Terrace (third) Floor 1 11,289.83 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 2 9,201.68 C.M.

First Floor 1 9,242.63 C.M.

Second Floor 1 9,283.59 C.M.

Terrace (third) Floor 1 9,324.54 C.M.

(1)Having c/s area up to 0.08s.mt- Ground Floor 5 9,102.61 C.M.

First Floor 1 9,143.56 C.M.

Second Floor 1 9,184.52 C.M.

Terrace (third) Floor 1 9,225.47 C.M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m - G.F 2 8,174.41 C.M.

First Floor 1 8,215.36 C.M.

Second Floor 1 8,256.32 C.M.

SOR (24-25) - Terrace (third) Floor 1 8,297.27 C.M.

PG.NO.1, IT NO. 13 (3) Having cross sectional area more than 0.12 sq. mt. -- G.F 1 7,086.88 C.M.

First Floor 1 7,127.84 C.M.

Second Floor 1 7,168.79 C.M.

Terrace (third) Floor 1 7,209.75 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'.- G.F 5 7,984.42 C.M.

First Floor 1 8,025.37 C.M.

Second Floor 1 8,066.33 C.M.

Terrace (third) Floor 1 8,107.28 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.- G.F. 2 7,396.96 C.M.

First Floor 1 7,437.92 C.M.

Second Floor 1 7,478.87 C.M.

Terrace (third) Floor 1 7,519.83 C.M.

(4) Slabs having more than 13 cm. Thickness -- G.F 1 6,813.01 C.M.

First Floor 1 6,853.96 C.M.

Second Floor 1 6,894.92 C.M.

Terrace (third) Floor 1 6,935.87 C.M.

(D) LINTELS: -- G.F 1 9,982.37 C.M.

First Floor 1 10,023.32 C.M.

Second Floor 1 10,064.28 C.M.

Terrace (third) Floor 1 10,105.23 C.M.

(E) CHAJJAS: -- G.F 1 5,576.81 C.M.

First Floor 1 5,617.76 C.M.

Second Floor 1 5,658.72 C.M.

Terrace (third) Floor 1 5,699.67 C.M.

Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded stone

agg. 20 mm nominal size) finishing smooth curing etc. comp. Incl.. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in :

(A) Stair cases including landings etc.

Ground Floor 1 7,698.11 C.M.

First Floor 1 7,739.06 C.M.

10 Second Floor 1 7,780.02 C.M.

Terrace (third) Floor 1 7,820.97 C.M.

(B) Vertical and horizontal fins

Ground Floor 1 11,613.07 C.M.

First Floor 1 11,654.03 C.M.

Second Floor 1 11,694.99 C.M.

Terrace (third) Floor 1 11,735.94 C.M.

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work

incl. bending, binding & placing in position etc.comp.---Ground Floor

11 First Floor 20 78.34 Kg.

Second Floor 10 79.39 Kg.

Terrace (third) Floor 10 80.44 Kg.

Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks 10 4,729.83 C.M.

SOR (24-25) - Ground Floor

First Floor 10 5,018.55 C.M.

Second Floor 2 5,307.27 C.M.

Terrace (third) Floor 2 5,595.99 C.M.

Half brick masonry in common brunt clay building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in foundation and plinth 50 551.00 S.M.

(C)Fly Ash Bricks(MR)

13 Ground Floor 10 712.81 S.M.

First Floor 5 719.37 S.M.

Second Floor 5 725.94 S.M.

Terrace (third) Floor 5 732.50 S.M.

SOR (24-25) - Uncoursed rubble masonary with hard stone of approved quality in foundations and

PG.NO.2, IT NO. 18 plinth in cement mortar 1:6 (1 Cement : 6 sand) including leveling up etc. complete.

Providing Rubble Pitching with hard stone of approved quality in cement mortar 1:6 (1

Cement : 6 Coarse sand) including leveling up ,Curing etc. complete excluding pointing

SOR (24-25) - Providing and filling rubbles including hand packing and filling interstices with quarry spalls

PG.NO.3, IT NO. 22 behind abutments and between returns as directed.

Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete walls

similar surfaces for plastering & finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion etc. comp. in C.M 1:3 (1 50 199.28 S.M.

cement : 3sand) (A) For wall

and similar surfaces -- Ground Floor

First Floor 50 228.84 S.M.

17 Second Floor 20 258.39 S.M.

Terrace (third) Floor 10 287.94 S.M.

(B) For ceilings &soffits of stairs

Ground Floor 50 225.34 S.M.

First Floor 30 254.89 S.M.

Second Floor 20 284.45 S.M.

Terrace (third) Floor 10 314.00 S.M.

Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete walls

SOR (24-25) - similar surfaces for plastering & finished even & smooth with a floating coat of cement slurry

PG.NO.3, IT NO. 25 mixed with admixture of lime or neeru in required proportion etc. comp. in C.M 1:3 (1

cement : 3sand) (A) For wall and similar surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls for height more than 10 metres above

19 ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm 25 347.42 S.M.

thick finishing coat of C.M. 1:1 (1-cement : 1- sand) etc. complete.

Providing 20 mm thick double coat mala cement plaster on brick / concrete work for

SOR (24-25) - plastering comprising of base coat 12 mm thick cement plaster in cement mortar (1

PG.NO.3, IT NO. 27 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1

Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete.

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all

SOR (24-25) - floor levels consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm.

21 PG.NO.3, IT NO. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and apply roller 10 324.00 S.M.

28(MR) horizontal as well as vartical ( two times ) up to good quality and size of grain in elevation as

per directed by engineer incharge.

SOR (24-25) - Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp.. For all

PG.NO.3, IT NO. 29 floor

Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

SOR (24-25) - cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

PG.NO.3, IT NO. 32 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo

SOR (24-25) - and pillars laid on 10mm thick cement mortar 1:3 (1- Cement : 3 coarse sand) and

PG.NO.4, IT NO. 33 jointed with gray cement slury mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete.

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria,

SOR (24-25) - Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring, treads of steps & landings

PG.NO.4, IT NO. 34 laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand) finished with flush pointing in white

cement etc.com. For all floors

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria,

SOR (24-25) - Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of steps & dado on 10 mm.

PG.NO.4, IT NO. 35 th. C.M.1:3(1cement :3 sand) including necessary cement paste for fixing and joined with

white cement slurry etc. complete. For all floors

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a

28 bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing 50 960.42 S.M.

in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on

29 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement 50 1037.25 S.M.

Providing & laying granite slab 18mm thick in flooring, treads of steps and landing laid

on bed of 20mm thick cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5

laid and finished with flush pointing in white or colour cement including rubbing and

polishing complete. ( Basic Rate:- Rs.1347.46/S.M.)

Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and pillars

laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and finished with

flush pointing in white or colour cement including rubbing & polishing comp.. (Basic Rate:-

Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid on 10mm

thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with nessary adhesive material and

finished with flush pointing in white or colour cement, including rubbing & polishing comp..

(Basic Rate:- Rs.1000.0/S.M.)

33 Labour Charges For Edge Finished For Granite 200 43.43 R.M.

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, Jhonson, Nitco, Somani,

Bell, Asian or Euro make in flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse sand) on new surface or

34 fixing on existing flooring by adhesive material including dismentaling of existing flooring and 50 1,467.72 S.M.

jointed with colour cement slurry including finished with flush pointing & cleaning the

surface etc. comp.Size 24" x 24"

For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads of steps and

35 landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing 50 1,092.37 Sqm.

with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of steps and

36 dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white 50 1,135.80 Sqm.

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water proof Ply

Vennered & 1.5 mm th.laminate shall be pasted on both side with adhesives as specified

37 by the manufacturers. The laminate shall be as per approved shade & texture, of make incl. Sal 5 3,720.00 S.M.

wood frames of finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws &

Anodized aluminum fixtures & fastenings For all Floor

38 Same as Above But Without Frame 20 2,520.00 S.M.

Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows & clearstory

windows incl. Indian teak wood frames of finished size 12cm x 7cm.incl. anodized

SOR (24-25) - aluminum fixtures & fastenings incl. Primer coat of approved quality & two coats of oil

PG.NO.5, IT NO. 53 painting etc. For all Floor (A) Fully Panelled

(B) Partly Panelled and Partely Galzed 5 5,185.03 S.M.

(C) Fully Galzed 5 4,836.39 S.M.

Providing and fixing 35mm thick shutters for Doors, windows and clearstory windows

40 including anodised alluminium butt hinges with necessary screws. 5 4,101.06 S.M.

(A) Indian teak wood. (i) Fully Panelled.

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP shutter with wood

grain raised panneled design finish shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to be filed up with injected polyurethene foam

41 done in situ along with embedded wooden pieces for stiffening & also taking hinges & fixtures. 20 2,019.98 S.M.

The whole FRP frame & shutter is to be water proof weather proof,termite proof &resistance

to mild acid/alkali. Rates are to be inclusive of S.S.hinges with fastener sleeve & alluminium

fixtures & fastentings.

Providing & fixing M.S.Grills of required pattern to wooden frames of windows etc. At all

SOR (24-25) - floor levels with M.S. flats at required spacing & frame around square or round bars with

PG.NO.5, IT NO. 57 round headed bolts & round headed bolts and nuts or by screws incl. Priming coat of Red lead

paint etc. comp. (A) Plain grill For all Floors

Providing & fixing in position collapsible steel shutters with vertical channels 20 x10 x 2 mm.

SOR (24-25) - Braced with flat iron diagonals 20 x5mm size with top & bottom rails of T-iron

PG.NO.5, IT NO. 58 40x40x6mm. with 38mm dia. steel pulleys comp. with bolts, locking arrangements,

stoppers, handles incl. applying a priming coat of Redlead paint etc. comp.

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe with hooked

44 ends to RCC slabs curing, layig including painting the exposed portion of loops, all as per 5 135.47 Each

standard design complete.

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering,

vibrating, curing & mixed with approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing admixture as water proofing agent to

be mixed with 50 kg. cement bag shall be as recommended by the manufacture of the

water proofing material, concrete work for top, bottom slab & side pardi for Under

ground Tank & Item incl. Necessary excavation & refilling the available earth, 15 cm th' C.C

45 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall, inside R.C.C. pardi as per design,

10mm.th. water proofing cement plaster in C.M. 1:3 with smooth finishing,watering

etc.Comp.to all inner face & bottom of tank curing etc. comp. incl. Locking

arrangement, outlet, inlet, overflow & wash out pipe arrangement as necessary & C.I. Cover

0.60 x .045 weight not less then 35kg. etc. com. as per structural drawing excluding Steel & as

directed by Engineer- in-charge

Underground tank 500 6.87 Lit.

SOR (24-25) - Providing and filling in depressions of Bath and W.C. At all floor levels, after completing

46 PG.NO.6, IT NO. plumbing work of pans, pipes,traps etc.with cinder or fly ash as directed by Engineer in charge 10 500.00 C.M.

61(MR) etc. comp..

NOTE :- (1) The whole work is to be executed through specialized agency with a

guarantee of 10 (Ten) years given on a prescribed proforma duly stamped (2) The rate

shall include for work at all floors & conducting water

proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound

conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound confirming to

IS:2645 about 25 mm. th' in the floor of the depression & about 18mm th' On the side walls of

the depression up to the floor level, water proofing plaster about 18 mm. th' be continued on 30 296.00 S.M.

the walls above the floor level for a height of 600 mm. with surface suitable to receive further

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading @0.008

C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement consumption 0.316 Bags /

(B) Providing and laying integral cement based water proofing treatment including preparation

of surface as required for treatment of roofs, balconies, terraces etc. consisting of following

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed

with proprietary water proofing compound comforming to IS:2645 over the R.C.C. slab

including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of

cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with proprietary water proofing

compound conforming to IS:2645 ,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing compound confirming to IS:2645 &

top smooth finished with trowel with false chequered marking of 300 mm.size.The treatment is

carried along the vertical surface of the parapet & other adjoining wall up to height of about

300 mm in a shape of quarter round vata Incl. curing etc. Comp. With average thickness of

mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing and for final test. All above operations to be down in order and as directed

and specified by the engineer-in-charge. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Proiding & laying water proofing treatment to vertical and horizontal surfaces like consisting

of (a) I course of applying cement slurry 4.4 kg per sq.mt. mixed with water proofing

SOR (24-25) - compound confirming to IS:2645 in rcommended proportions. (b) II corse of 20mm cement

48 PG.NO.6, IT NO. plaster 1:3 mixed with water proofing compound in recommended proportion (c) III course of 20 505.00 S.M.

63(MR) applying blown or / resideal bitumen applied hot at 1.7 kg per sqm of area. (d) IV course of

400mm micron th. PVC sheet. (Overlaps at joints of PVC sheet should be 200mm wide and

pasted to each other with bitumen about 1.7 kg./ sqm.)

49 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 10 101.91 No.

SOR (24-25) - Providing & fixing at all floor levels,both face polished machine cut edge green kota stone

50 PG.NO.6, IT NO. slab (30mm) for urinal partition joined with grey cement slurry (1:1) incl. Rubbing & polishing 5 900.00 S.M.

65(MR) etc. complete. (M.R.)

SOR (24-25) - Providing & fixing at all floor levels,both face polished machine cut edge Marble slab for

51 PG.NO.7, IT NO. urinal partition joined with grey/White cement slurry (1:1) incl. Rubbing & polishing etc. 5 1,050.00 S.M.

66(MR) complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

WATER SUPPLY AND SANITARY ITEMS

Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor levels, size 580mm

incl. 100 mm size "P'or "S" trap for water closet squatting pan joining the trap with the pan

52 & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long pattern of 50 1,471.41 No.

approved colour For all

Providing and fixing Wash Down Water closet European type W.C. pan with integral P or S

SOR (24-25) - trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 find sand)

PG.NO.7, IT NO. 68 (seat and cover to be measured and paid for separately) (A) Viterous china pattern - I (i) in

approved colour

SOR (24-25) - Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges

PG.NO.7, IT NO. 69 and rubber buffers (B) Plastic seat and cover.

Providing & fixing wash basin with single hole for pillar tap at all floor levels, with C.I. or M.S.

Brackets painted white incl. cutting holes & making good the same incl. fittings such as pillar

55 tap, capstan head screw down high pressure with screws, shanks & back nuts, C.P. Brass waste 10 2,132.94 No.

trap, screw down stop tap 15 mm. dia. etc. complete. (A) Vitreous china flat back wash basin

550 mm.x 400 mm. size in approved colour For all Floor

Providing & fixing Urinal or approved quality including conecting the Urinal with waste pipe,

56 tap etc. complete. (A) White earthenware flat back or corner type size 430 mm x 260mm x 50 1,074.86 Each

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor levels,

57 mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to wooden plugs with C.P.brass 10 859.41 No.

screws and washers etc. For all Floor

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber &

water tight C.I. cover with frame of 300mmx300mm size (inside) with weight includ.

58 plastering smooth inside & outside 15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps--

-(A) 100mm x 100mm Size -P type

(B) 150mm x 100mm Size- P Type 1 1,246.92 No.

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber &

water tight Pre cast R.C.C. cover of 300mmx300mm size (inside) includ. plastering smooth

59 inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps---(A) 300mm x 300mm Size -P type

(B) 150mm x 100mm Size- P Type 2 1,052.77 No.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x 610 mm & 450 mm

deep sewer trap chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster

15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 10 3,166.77 No.

60 cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I.

cover with frame to be not less than 38 kg. On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 3 2,915.61 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 3 233.85 Each

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5 with cement

plaster 15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4

mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation concrete

SOR (24-25) - 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg. On top etc. comp. Inside

PG.NO.7, IT NO. 76 dimension,455 x

610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 10 2,681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 3 242.39 Each

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of following nominal

internal diameters incl. Testing of pipes and joints etc. Comp

Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished bright etc. comp.-

(A) 15mm dia. For all Floors

SOR (24-25) - Providing & Fixing gun metal check or non return full way wheel valve at all floors levels, etc.

PG.NO.8, IT NO. 80 complete. (A) 15 mm. dia.

SOR (24-25) - Providing & Fixing chromium plated brass half turn flush cock at all floor levels, of

PG.NO.8, IT NO. 81 approved quality incl. fixing in pipe line etc. Comp.-- 25 mm dia.

SOR (24-25) - Providing & Fixing abonite ball cock of approved qualities directed etc. comp. (A) 25 mm.

PG.NO.8, IT NO. 82 dia.

SOR (24-25) - Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having weight not less

PG.NO.8, IT NO. 83 than 35 Kg. etc. complete.

Providing and fixing C.P. brass waste for washbasin or sink.

67 (A) 32mmdia. 5 67.91 Each

(B) 40mm dia. 5 89.83 Each

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B") of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste discharge system at

SOR (24-25) - all floor levels incl. All fixtures like bends, tees, shoe etc. jointed with resin of approved 100 412.00 R.M.

68 PG.NO.8, IT NO. brand & manufacture etc. comp. (M.R.) (a)

84(MR) 75mm Dia

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all floor levels incl.

fixtures like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the wall the help of clamp at every

two meter C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including cost

SOR (24-25) - of all materials.

PG.NO.8, IT NO. 86 (A) 15 mm dia. 10 72.65 R.M.

(F) 65 mm dia. (MR) 5 494.00 R.M.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/ Tulsi/Finolex

make for water supply line at all floor levels incl. fixtures like bends, tees, shoe etc joined

with resin of approved brand & manufacture etc. comp. Pipe shall be fixed on the wall the help

of clamp at every two meter C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm diameter with jali of

72 the following nominal diameter of self cleaning design with C.I. scread down or hinged grating 10 586.27 NO

including the cost of cutting and making good the walls.

SOR (24-25) - Providing & Fixing in position PVC Cowl vent to pipes of

73 PG.NO.8, IT NO. Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp. (A) 75 mm. dia.

89(MR) (B) 110 mm Dia. 5 50.00 NO

SOR (24-25) - Providing & fixing M.S. Holder Bat clamps at all floor levels of approved design to C.I.

74 PG.NO.8, IT NO. Or S.C.I pipes including the cost of cutting holes & making good the wall etc. Complete - 5 30.00 No.

90(MR) 100 mm. dia. (M.R.)

SOR (24-25) - Providing & fixing G.I./Aluminum Patti clamps at all floor levels of approved design to C.I. Or

75 PG.NO.8, IT NO. S.C.I pipes including the cost of cutting holes & making good the wall etc. Complete - 100 5 20.00 No.

91(MR) mm. dia. (M.R.)

Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark water tank

76 PG.NO.8, IT NO. 5000 3.95 Lit.

of required capacity each with all necessary fittings & connection etc. complete on terrace.

Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing with cement

SOR (24-25) - plaster 20 mm avg thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per instruction

77 PG.NO.8, IT NO. given by Eng. incharge. for

93(MR) (A) 75 mm PVC PIPE 10 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 10 180.00 R.M.

Providing & fixing C.P. brass pillar cock with copper connection, C.P.

brass screws complete

78 PG.NO.20, SANITARY

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat.

No.: F650003, Jaquar FLR-5011N

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp.

79 PG.NO.20, SANITARY

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

F530004, Jaquar FLR-5041N

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with

SOR (24-25) - C.P. copper connecting pipe 450 mm long and nuts, washer and brass flange complete,

80 PG.NO.20, SANITARY including cutting and making good the wall where required.

IT NO. 5 Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

F440020 F850094, jaquar CON 053 KN

Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete

81 PG.NO.20, SANITARY

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 ,HindWare

Cat. No.: F160144

Providing and fixing Towel Ring fabricated from seamless stainless steel tube 2mm thick in

SOR (24-25) - bath room with polished wall flange at end of bars with heavy duty anchor fasteners &

82 PG.NO.20, SANITARY accessories.

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N ,HindWare F880007 5 924.24 NO.

Providing & fixing S.S.towel rail of 600 mm long approved make including, providing & fixing

SOR (24-25) - C.P. brass screws, making holes in walls

83 PG.NO.20, SANITARY & making good.

IT NO. 11 Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM

,HindWare F880005T

Providing & Fixing stainless steel recessed type Soap dish of approved make. Including

SOR (24-25) - providing & fixing screws, washers, cutting

84 PG.NO.20, SANITARY & making good the walls.

IT NO. 12 Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N

,HindWare F880011

Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

85 PG.NO.20, SANITARY

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ

,HindWare F860075

SOR (24-25) - Providing Sink Cock with Regular Swinging Spout

86 PG.NO.20, SANITARY Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N

IT NO. 19 ,HindWare F650013

ITEMS FOR COMPOUND WALL & OTHER MISC. ITEMS :-

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of

the surplus excavated soil as directed within a lead of 50 M. For following diameter of

SOR (24-25) - piles.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm

88 nominal size)& curing comp. Includ.cost of form work but exclu. Cost of reinforcement for 6 3,741.69 C.M.

reinforced concrete work in : (A) Foundation, footing, Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4 (1cement:2sand: graded stone

agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in :

Up to G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08s.mt 10 12,335.51 C.M.

89 (2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 10 10,658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 10 8,692.87 C.M.

(1)Having c/s area up to 0.08s.mt 10 8,593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 10 7,665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 10 6,578.07 C.M.

SOR (24-25) - Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg.

PG.NO.9, IT NO. 97 20 m.m Nominal size)& curing comp. incl. cost of from work in: wall caps/ copings.

Steel work welded in built up sections, framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or

91 angle cleats as in main & cross beams,hip & trussed purlins connected to common 3 9,108.48 Qtl.

raffers & the like.

(B)For work like chain link fencing, above compound wall etc. 2 9,108.48 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 2 1,097.11 Qtl.

Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick with nuts, bolts,

washer or G.I. pins, excluding M.S. angles etc.complete as per relevent IS specification &

directed by engineer in charge. (TATA or Jindal

SOR (24-25) - Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing with necessary

93 PG.NO.9, IT NO. barbed wire (12 x 14 guage, weight not less than 0.14 kg. / mt.) pins, hooks, excluding M.S. 10 125.00 Kg.

100(MR) angles etc. complete as per relevent IS specification.& directed by engineer in charge

Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet 0.5 mm.

thick roofing fixed with gslvanised grom J or L hook bolts and bolt 8mm dia with bituman

and impet washer filled with white lead etc. Excluding the cost of purlins rafter and trusses.

(Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L Hooks,

Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled

95 with white lead complete excluding the cost of purlins, Rafters and Trusses. (1) 0.80 mm 10 734.19 S.M.

thick sheet. (Tata / Jindal or

Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L Hooks,

Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled

with white lead complete excluding the cost of purlins, Rafters and Trusses. (1) 0.63 mm

thick sheet. (Tata / Jindal or equivalent)

Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-3

SOR (24-25) - gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc. including marking

PG.NO.9, IT NO. 104 necessary connection with rain water pipes.

(i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L" hooks

98 bolts and nuts 8mm dia G.I. limpet and bitumen washer 10 664.70 R.M.

complete (1) 0.80 mm thick

Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-3

gutter with iron brackets 40mm x 3mm size bolts, nuts, washers etc. including marking

necessary connection with rain water pipes.

(i) 0.63mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L" hooks

bolts and nuts 8mm dia G.I. limpet and bitumen washer complete (1) 0.63mm thick sheet

Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the main cladding on both

edges. All fixing holes must be predrilled oversize as specified for the sheet length and fastener

being used. Fasteners must be fitted with approved washers. Fixings should be tightened to

ensure a weatherproof seal but they must not be over tightened Side-lap fasteners must also

SOR (24-25) - be installed at specified centers with the FRP sheet having clearance holes provided as per the

101 PG.NO.10, IT NO. main fasteners Weatherproofing shall be provided at all flashing points under the normal

108(MR) flashing by the fitting of a foam closure strip to match the profile being used. Closure strips will

be sealed to the sheet with an appropriate non setting silicone sealant. Excluding the cost

of purlins rafter and trusses.

(a) 1.5 mm thick 0 992.00 SM -

(b) 2 mm thick 0 1,100.00 SM -

Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is coated with an

anti-UV Co-extrusion layer having good weather resistance, it can maintain its optical

properties and mechanical performance for a long time. Fasting is usually done by screws. , The

fastening screws should be inserted about 500 mm apart and 300mm apart Along the

supporting internal purlin and edge pulin.All fixing holes with diameter at least 2 mm larger

than screw must be predrilled into each screw location. The screws should be 6mm diameter

with length according to sheet thickness and corrosion resistant, with at least heavy duty hot

dripped galvanized or stainless steel. Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 5 1,261.00 SM

(b) 2 mm thick Solid Sheet 5 1,510.00 SM

SOR (24-25) - Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 concrete also

103 PG.NO.10, IT NO. horizontaly in line and connecting to purline angle etc by welding rereting etc. 10 750.00 R.M.

110(MR) (a) Medium duty "B" Class

SOR (24-25) - Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 concrete also

104 PG.NO.10, IT NO. horizontaly in line and connecting to purline angle etc by welding rereting etc. 10 485.00 R.M.

111(MR) (a) Medium duty "B" Class

Providing & fixing black board on walls of 1.8mt.x1.2mt size made up to 12 mmth.B.W.P

SOR (24-25) - .Plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) fixed with

105 PG.NO.10, IT NO. teak wood beading of 65 mmx 50mm size, rubbing & sanding comp., incl. applying two coats of 0 4,193.00 No. -

112(MR) black board paint over a priming coat on plywood & French polishing the frame all round

etc. Comp. as per instruction of Engineer in charge (M.R.)

Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to 18 mm th.ply (using

SOR (24-25) - IS 710 Marin ply) with 1 mm thick outside green board & 0.8mm backside white

106 PG.NO.10, IT NO. laminate & with good Quality of adhesive with appropriate fittings of Alluminium 0 5,195.00 No. -

113(MR) fittings or teak wood bedding 65 mmx 50mm size, rubbing & sanding comp., as per instruction

of Engineer in charge (M.R.)

Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm thick with appropriate

fittings and Alluminium fittings comp., as per instruction of Engineer in charge (M.R.)

Providing & Fixing Reading table size 8' x 4' and height 2'-6" with table top 18mm thick (Brand

SOR (24-25) - Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) commercial plywood with 1.0mm

108 PG.NO.10, IT NO. thick lamination sheet fitting with teakwood moulding table top supported on 3" x 3" 0 14,774.00 NO -

115(MR) teakwood leg & 3" x 11/2" teakwood framing top and bottom with french polish labour work

hardware etc. as per site in charge instruction and as per drawing.

Providing & Fixing Librarian table with 18mm thick commercial plywood (Brand

SOR (24-25) - Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) )with 1.0mm thick lamination sheet

109 PG.NO.10, IT NO. table top supported on 2" x 2" teakwood leg & make 3 nos. drawers of 1' 3" width on both side 0 8,390.00 NO -

116(MR) with necessary french polish hardware labour etc. as per site incharge instruction and as per

drawing ( Size 4' x 2'-6" x 2'-6", all framing other then legs are teak wood of size 2" x 1")

Providing & Fixing simple 12mm thick commercial plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) Rack of size 6' x4' and depth 1'-6" 5 Nos. horizontal partition,

supported 2" x 1" framing with necessary french polish hardware labour etc. as per site

incharge instruction and as per drawing.

Providing & Fixing fitting commercial 8mm thick plywood (Brand Saras,Kitply,Uniply, Anchor,

SOR (24-25) - Green,Wood Stock or century) magazine stand of Size 6' x 4' with 3" x 11/2" vertical

111 PG.NO.11, IT NO. supporting and adjustable lag support and horizontal simple 2" x 1" teakwood patti for 1 6,745.00 NO

118(MR) magazine support with necessary french polish hardware labour etc.as per site in charges

instruction and as per drawing.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless steel dash fasteners , stainless

steel bolts etc., of required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight

of stainless steel members shall be considered excluding fixing accessories such as nuts,

bolts, fasteners etc.).

Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I. or PVC pipes

including the cost of cutting holes & making good the wall etc. Complete - 100 mm dia as per

SOR (24-25) - architect instructions.

113 PG.NO.11, IT NO. (A) 40 to 50 mm dia 5 62.00 No.

121(MR) (B) 75 to 90 mm dia 5 75.00 No.

(C) 110 mm dia to upto 150 mm dia 5 90.00 No.

(C) 150 mm to 200 mm dia 5 98.00 No.

Providing and constructing sandwitch type Polish Kota Stone cooking platform 0.6 mt.

wide & 0.75 mt. height, including one end side Polish Kota stone (Double Polish) of 1.25 mt.

height & front Polish Kota stone patti of 10 cm wide, vertical partitions of half B.M. wall in C.M.

114 PG.NO.11, IT NO. 2 3,010.00 Rmt.

1:4 and 10mm th. plaster in 1:3 with finishing smooth with cement slurry as required and

Stainless Steel sink of 0.45 mt x 0.45 mt size of approved quality and make with required all

fitings & fixitures etc. comp as per instruction given by site in charge at all floors.

Providing and constructing sandwitch type Granite stone cooking platform 0.6 mt. wide &

mt. height, including one end side granite stone (Double Polish) of 1.25 mt. height & front

granite stone patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and

10mm th. plaster in 1:3 with finishing smooth with cement slurry as required and

115 PG.NO.11, IT NO. 2 3,128.00 Rmt.

Stainless Steel sink of

0.45 mt x 0.45 mt size of approved quality and make with required all fitings & fixitures etc.

comp as per instruction given by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP / PVC)at junction

of brick work and RCC work or two dissimilar surfaces, at all heights fixed by nails, rowal plugs

or tag by cement mortar 1:3 before applying the plaster, including curing, scaffolding all

complete as directed.

SOR (24-25) - Providing and filling Epoxy grout of approved or suggested brand by consultant /

117 PG.NO.11, IT NO. Engineer in charge in 4mm to 6mm thick tiles joint including spacer with cleaning of joint 10 40.00 Rmt.

125(MR) by vacuum or blower etc

Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments, tools, material,

labour, etc. Standard procedure as mentioned in manufacturer's specifications

shall be strictly followed, which shall be submitted and got approved from the authority

prior to start of work. The rate shall also include cost of drilling of hole of required

diameter and depth as mentioned in manufacturer's specification, cleaning the hole with

required air blower and other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but excluding the cost of reinforcing bar

etc. complete. Item includes necessary scaffolding, staging, labour, tools and equipments,

etc. complete as directed by the engineer-in- charge.

Carring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistment with ISI

SOR (24-25) - specification. Using Chlordene and Chiorpurfiles

119 PG.NO.11, IT NO. 20 EC. As per 6131_paret-II Consentration Weight one percent is recommended i.e. 5 87.03 Smt.

127 one litre 20 EC chemical emulsion with 19 liter give 1% concrentration inclusive of one

litre chemical emulsion appication at the rate of 5 litre chemical / Sqm of surface is

recommended as per IS.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter

SOR (24-25) - locked together through their entire lenght and jointed together at the ends by end locks

120 PG.NO.11, IT NO. mounted on specially designed pipe shaft with bracket plates, guide channels and 0 3,554.40 Smt. -

128 arrangements for inside and outside locking with push-pull operation including the cost of

hood cover and spring etc. complete (A) Shutters having width below 3.5 M.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter

SOR (24-25) - locked together through their entire lenght and jointed together at the ends by end locks

121 PG.NO.11, IT NO. mounted on specially designed pipe shaft with bracket plates, guide channels and 0 4,546.01 Smt. -

129 arrangements for inside and outside locking with push-pull operation including the cost of

hood cover and spring etc. complete. (B) Shutters having width 3.5 M and above

Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it on vertical

surface.Steel work welded in built up sections, framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint in beams & joists channels angles, tees,

122 PG.NO.11, IT NO. 3 2,677.00 Smt.

flats with connection plates or angle cleats as in main & cross beams, hip & trussed purlins

connected to common

raffers & the like.

Providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken

SOR (24-25) - pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered

123 PG.NO.11, IT NO. to bring mortar creme out upto surface using white cement including rounding off 10 779.70 Sqm.

131 junctions and extending them upto 15 cm along the wall clearing with water and oxalic acid

etc. as directed.

SOR (24-25) - Providing and Fixing Hollow steel Sections Framed Work including Cutting, Hoisting,

124 PG.NO.11, IT NO. Welding & Fixing in position Purlin, Main Chord etc. as per Engineer- in-charge.TATA / JINDAL / 200 126.00 Kg

132(MR) ASIAN Make

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including neat

125 PG.NO.11, IT NO. 10 24.82 Rmt.

cement finishing, watering etc. complete.

SOR (24-25) - Apply two coats of putty and two coats of primer of approved brand and manufacture on new

126 PG.NO.15, COLOUR wall surface to give an even shade including thoroughly brushing the surface free from 50 40.59 S.M.

WORK IT NO. 4 mortar dropping and other matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and

SOR (24-25) - manufacture on undecorated wall surface to give an even shade including throughly

127 PG.NO.15, COLOUR brushing the surface free from mortar droppings and other foreign matter and sand

WORK IT NO. 5 papered smooth.

For every subsequent coat Extra over item no.above 50 35.41 S.M.

SOR (24-25) - Painting two coat (excluding priming coat) on new steel and other metal surface with

128 PG.NO.15, COLOUR synthetic enemal paint, burshing to give an even shade including cleaning the surface of 100 68.57 S.M.

WORK IT NO. 8 all dirt, dust and other foreign matters.

Providing & applying two coats of weather shield max paint (3 coats may be required in case

of darker colours.)of ICI Dulux or Apex Ultima of Asian Paint including applying exterior

acrylic primer coat as per manufacturers specification and directions in shade and colour

approved by architects, on exterior surfaces of the building including scaffolding, preparing

the surface, watering, curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and

129 PG.NO.15, COLOUR 100 82.00 S.M.

flaking paint. This can be achieved by brushing with a wire/ stiff coir brush, followed by water

WORK IT NO. 17(MR)

jetting if required. Fill up all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously painted wall, previous coatings of paint

must be thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of

putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield max paint

Providing and fixing window having extruded aluminum Colour anodized section frame main

outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member size

122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x

31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @

kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per

details etc complete for window.

(A) Same as above but Colour anodized 3 2,140.33 S.M.

Providing and fixing window having extruded aluminium Powder Coated section frame

main outer size 95 mm x 24 mm x 1.17 mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt),

horizontal Three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no;8688,

@ Wt. 1.07 Kg/mt), vertical member of size 92 mm x 31.75 mm x 1.50 mm (of jindal

section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mm x

131 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of

0.456 kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8949 @

wt. of 0.456 kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminium fittings & fixtures and transparent silicon sealant glass fixing to frame as per

(A) Same as above but Colour anodized 3 1,591.87 S.M.

Providing and fixing window having extruded aluminium Powder Coated section frame

main outer size 63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt)

horizontal Two track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

SOR (24-25) - 31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding

PG.NO.16, shutters of horizontal member size 40 mm x18 mm x 1.29 mm ( of jindal section 5 1,705.67 S.M.

ALUMINIUM WORK no:8949, @ Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

IT NO. 3 section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick

tranparent bronze colour tineted float glass with powder coated aluminium fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc. complete for

(A) Same as above but Colour anodized 30 1,705.67 S.M.

Providing and fixing standared extruded ofalluminium section of size 63mm x

38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for

133 ventilation with

mm thick frosted glass as details etc complete for Ventilation

(A) Same as above but Colour anodized 5 1,175.56 S.M.

Providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of

Jindal section no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated alluminium frame

134 with 5 mm thick transparent bronze colour tinted float glass as

details etc. complete for fix window.

(A) Same as above but Colour anodized 5 1,833.29 S.M.

Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with aluminium

section of Hindalco, Jindal , Narmada,Banco or Equivalent approved make having Poder

Coated outer frame Leg Partition section of 63.50 mm x 38.10 mm having weight

SOR (24-25) - kg. / R.M. shutter section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and

PG.NO.16, middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing 5 3,237.00 S.M.

ALUMINIUM WORK side:0.974 kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick

IT NO. 6(MR) sheet glass in acid frogting and 12 mm thick prelaminated sheet of Greenlam, Panama or archid

make as approved by Engineer-in charge including fixing brass pivot, handle, lock etc.

(A) Same as above but Colour anodized 5 3,237.00 S.M.

Providing & fixing Powder Coated Aluminium partly glazed and partly panelled partition

using medium duty sections of Hindalco,Zindal, Narmada, Banco or Equivalent

approved make having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt & Middle section-

SOR (24-25) - 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float glass of approved make including

PG.NO.16, all other necessary fittings and fixtures. Entire work will have to be made water proof using 5 2,400.00 S.M.

ALUMINIUM WORK necessary rubber sectioned wherever required. Gaps all round the frame to be filled with

IT NO. 7(MR) approved water proof sealent. Bottom portion of doors both side to be covered with 12mm

thick prelaminated particle board of approved

make and quality and as per design.

(A) Same as above but Colour anodized 5 2,400.00 S.M.

PG.NO.17, Demolition including stacking of serviceable materials with all

DEMOLITION IT NO. lead and lift. (i)) RCC Work

Demolition of brick work and stone masonry including stacking of serviceable materials and

138 disposal of unserviceable materials with all lead and lift. (i) On Cement 2 577.92 C.M.

DEMOLITION IT NO.

Removing and scraping of old deteriorated plaster of any thickness from wall / RCC member

139 including stacking of serviceable material and disposal of unserviceable from site 10 20.55 S.M.

DEMOLITION IT NO.

of work with all lead and lift.

PG.NO.17, Dismentling steel work including distempering and stacking

DEMOLITION IT NO. the maerials with all lead and lift.

Dismentling door, windows, ventilators etc. (wood or steel) shutters including chowkhats

141 architraces, holdfasts and other attacement etc. complete and stacking them within all lead 2 197.09 EACH

DEMOLITION IT NO.

and lift. (i) Not exceeding 3 Sq.M. in area.

Dismentling door, windows, ventilators etc. (wood or steel) shutters including chowkhats

142 architraces, holdfasts and other attacement etc. complete and stacking them within all lead 2 263.90 EACH

DEMOLITION IT NO.

and lift. (i) exceeding 3 Sq.M. in area.

PG.NO.17, Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters etc. stacking of serviceable

DEMOLITION IT NO. materials and disposal of unserviceable materials with all lead and lift. (i) G.I. sheet roofing.

144 Removing of Collapsible Gate 10 101.00 No.

DEMOLITION IT NO.

145 Removing of Rolling Shutter 0 101.00 EACH -

DEMOLITION IT NO.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

A Kota stone flooring and steps 50 50.11 S.M.

DEMOLITION IT NO.

B Marble 50 50.11 S.M.

DEMOLITION IT NO.

C Tiles flooring / Dedo 50 50.11 S.M.

DEMOLITION IT NO.

D Granite flooring and steps 5 50.11 S.M.

DEMOLITION IT NO.

Preparation of subgrade with Compacting, Levelling and consolidation of

subgrade with miniroller /plate vibrator machine including watering and filling

in depressions which occur during the process as directed by engineer in

Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering,

ramming & consolidation etc. complete.

Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted thickness over

the base including necessary compaction, watering etc. complete. Item includes leveling by

using vibratory plates compacted

machine and as directed by engineer in charge.

SOR (24-25) - Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand : 10- hand broken

149 PG.NO.19, GD IT NO. stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) 1 2,606.92 C.M.

5 Foundation and Plinth

Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x 380mm)

purchased from SMC's approved paverblock manufacturer & setting in line, level and in truly

vertical position, including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust)

smooth pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including watering etc.

as directed by engineer in charge.

Providing interlocking type Rubber moulded cement concrete paver block of approved shape,

design & colour having 60mm thickness (M-35) purchased from SMC's approved paverblock

SOR (24-25) - manufacturer only & fixing of fine sand bedding. Item includes levelling by using vibratory

151 PG.NO.19, GD IT NO. plates compacted machine. Item also includes all materials, labour, equipments, tools, plants,

7(MR) watering, cleaning etc. complete.

Without colour 5 524.00 S.M.

Providing & laying Granular sub base (GSB)confirming to Grading-V of Table 400.0 of

SOR (24-25) - compacted thick of 150mm with specified graded stone metal and sand mixed in place and

152 PG.NO.19, GD IT NO. laid with mechanical means spreading with motor grader and compacting with vibratory 10 1,469.00 C.M.

9 roller having minimum 80-100 KN static weight to acheve desired density of 98% of

MDD including all material, labour, machinery with all leads and lift etc. complete.

SOR (24-25) - Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5 sand:3 graded

153 PG.NO.19, GD IT NO. stone agg. 20 mm nominal size) & Vaccuum Dewatering technique including floating surface 5 5,981.00 C.M.

10(MR) with a skim powder floater, curing etc. complete.

SOR (24-25) - Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2 sand:4 graded stone

154 PG.NO.19, GD IT NO. agg. 20 mm nominal size) & Vaccuum Dewatering technique including floating surface with a 5 5,245.25 C.M.

11(MR) skim powder floater, curing etc. complete.

155 PG.NO.19, GD IT NO. Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S Concrete 10 26.00 S.M.

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with filling of epoxy

sealent as directed by engineer in charge

RCC Core Cutting is about making precise, circular cuts for creating holes of required diameters

for Rehabilitation in civil works. The core drilling rod is fitted with diamond pieces at the drilling

end. The core cutting machine can be used for both horizontal and vertical hole making

A (A) 75mm -110mm 5 286.00 Nos

Poviding and applying cement mortar (1:3) modified by using polymer and expanding grout

additives at 25mm thickness for repair/strengthening of various RCC elements at all floor

SOR (24-25) - levels, lead, lift, including breaking, chipping, dismentling existing cover concrete and exposing

PG.NO.22, existing reinforcement, applying wirebrush for making surfaces of steel and concrete free

REHABILITATION from rust and other loose materials, applying rust removing chemical on existing

WORK IT NO. 2 reinforcement, applying anticorrosive coating on existing reinforcement, applying polymer

bonding agent on existing concrete surfaces before applying polymer modified mortar in

specified thickness as directed by the Engineer-in-charge.

PG.NO.22, Providing & fixing G.i mesh 25X25X3mm used for celling repair fixed with celling rebar column

REHABILITATION as per directed by enginner incharge rate excluding the rebar cost .

oviding & Applying 20mm.to 35mm Th.(Max. 35mm thickness consider) Heavy Roller plaster

on walls or similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand : racron 3s ( 0.5 nos per bag )) also plaster master

160 wterproofing chemical 100 ml /bags as per companey manual & approved by E.I.C or 10.00 417.00 S.M.

consultant & 8 mm. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry

and apply roller horizontal as well as vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

161 Polishing flooring after repair work done as direct by E.I.C 10.00 417.00 S.M.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having

Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength

The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to

be laid on true horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting

of main ‘T’ runner suitably spaced at joints to get required length and size of

24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and

cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm

and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid

of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-

163 GYPSUM CEILING 5.00 958.58 Sq. Mt

Supplying and Fixing of Suspended ceiling system components which includes Single Layer

Boarding with 12.5mm thick USG Boral Standard Plasterboard This includes of USG Boral

Thundersteel Perimeter Channel (0.50mm thick having one flange of 20mm and another flange

of 30mm and a web of 28mm) screw fixed to brick wall/partition with the help of approved

screws at 600mm centers. Then suspending of USG Boral Thundersteel Intermediate channel

(45mm x 0.90mm thick with two flanges of 15mm each) from the soffit at 1220mm centers

with of USG Boral Thundersteel Ceiling Angle (25x10mmx0.50mm thick) fixed to RCC Slab with

of USG Boral Soffit Cleat (37x27x25x1.6mm thick) and 8mm dia 40mm long Anchor Fastener @

600mm Centers, respectively. USG Boral Thundersteel Ceiling Section (having web of 51 mm

and two flanges of 27mm each) are then fixed to the of USG Boral Thundersteel Intermediate

channel with the help of connecting clip (2.6mm Dia) and in perpendicular direction to the USG

Boral Thundersteel intermediate channel at 457mm centers. USG Boral Thundersteel profiles

are rolled with AZ Steel (150 GSM & 310 MPa Yield Strength) having base metal conforming to

IS 513:2016 as per IS 15961:2017/ AS 1397:2001).12.5mm thick USG Boral Standard

Plasterboards (confirming to IS 2095 Part 1) is screw fixed with 25mm long Drywall screws at

Supply & Fixing of 16mm.th.Armstrong classic Lite square edge mineral fiber celling with 24mm

grid(local) G.I. Frame girid consist of 600mm x 600mm. tecno grid pre coated main runner 38x

164 24 x3600 mm, cross T 30x24x1200mm,cross runner 24x24x600mm,wall Angle 24 x 24 mm. 5.00 600 Sq. Mt

required length suspension wire of 2.50mm G.I. and necessary hardware etc. comp.approved

by engineer-in-charge

Providing and fixing of Cement sheet ceiling using aluminium channel & pipe, screws etc.

complete with all material, labour with all lead, lift and transport. and finished by approved

shade of plastic paint (Basic Rate for 8 mm plain cement sheet : 35 rs./sqft.)and finished and

complete the work satisfactorily as per instruction of architect or Engineer-in charge And as per

" Architecture" detail.

Providing and fixing

165 (A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 5.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

Providing and Replace door, Window S.S. Fixtures fix in wooden / Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 5.00 200.00 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 5.00 150.00 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 5.00 80.00 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 5.00 100.00 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 5.00 120.00 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 5.00 140.00 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade 5.00 54.78 No.

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 5.00 76.17 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 5.00 850.00 No.

(J) Inter Lock [Kadaka lock] 5.00 200.00 No.

(H) Locks Godrej Mortice lock cover 5.00 350.00 No.

(I) Door closers arrow type with spring 12 length as approved sample (30 cms) 5.00 975.00 No.

(J)Handle for doors Windows Cupboards etc. Brass 15 cms. Length 5.00 50.00 No.

(K) S.S. Door / window hinges 4x1"x1" 5.00 50.00 No.

Providing & fixing water proof plywood (ISI marks 710 grade) at the door,window and any

space in the building. necessary hardware,screws materials etc. complete as per instruction by

engineer in charge.

(F) 12mm BSL partical board green or Equalent make 1.00 350.00 S.M.

(G) 12mm plan E board Evrest or Equalent make 1.00 350.00 S.M.

Providing & laying Non reflective solar contact film for fixing on glass as approved

colour,design,cutting complete as per instruction by engineer in charge.

Providing & fixing Glass Table Top using 08mm th.clear glass with crystal edge & necessary

hardware materials etc. complete as per instruction by engineer in charge.

Providing and filling the expansion joint by polymer confirm to BS4254-1983 as per required

shade and specification by making groove of 50 mmx12.5mm lather by cutting or by repairing

groove and removing mortar dropor anyother foreign materials including applying primer and

filling required size (over size of joint PU foam etc. complete.)

Removing & resetting existing readymade c.c. kerb stone of required size & thickness in line

.level and in truly vertical position including filling joints in C.M. 1:1 (1 part of cement : 1 part

of stone dust) smooth pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including

watering etc. complete and as directed by engineer in charge. (M.R)

Removing and Resetting of Paver block of walk-way with necessary sand / pana filling and

make in line and level with necessary vibrating using compactor machine.

Providing and fixing hard drawn steel wire fabric 75mmx25mm mesh or weight not less than

7.75 kg.per Sq.M. to window frames etc. including 60x 20mm beading of teak wood.

Cutting out cracks of roof terrace to V- section , cleaning out, wetting , grouting with

cement and sand slurry 1:3 (1-cement 3-sand )

Cutting out cracks roof terrace to V-Section cleaning out and filling solidly with a hot

mixture of bitumen and clean dry sand (1:1 by weight)

Signature of the Contractor: SD/-

Executive Engineer

East (Varachaa) Zone-A

Surat Municipal Corporation.