Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹24.7 Cr
EMD Value
₹24.7 L
Closing Date
18 Apr 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Interior Renovation and Furnishing Works at NBCC Office, WTC, Nauroji Nagar, New Delhi
NBCC/REDivision/2024/10~EWa9d295b1f0a102ebbb4afc79
NBCC/REDivision/2024/10
Open Tender-Domestic
Civil Works - Buildings
NBCC Bhawan
₹11,800
₹24.7 L
18 Apr 2024
15 Mar 2024
18 Apr 2024
15 Mar 2024
18 Apr 2024
Bill of Quantities Rev 1
ABSTRACT OF COST
Sl.No. DESCRIPTION DSR-2023 (AMOUNT) TOTAL
Note: This cost is exclusive of any cost index and contingency charges.
Signature Bidder Page 1 of 90 Signature
Digitally NBCC
signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED NBCC OFFICE, K-TOWER, WTC,NAUROJI NAGAR
DSR 2023 DSR-2023 Rate
Description Quantity Unit Amount (INR)
Item No. (INR)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and
4.1 shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm
4.1.8 nominal size derived from natural sources) 242.42 cum ₹ 6,812.00 ₹ 16,51,359
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including
attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five
level, excluding the cost of centering,shuttering and finishing:
1:11/2:3 (1 cement : 1% coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20
mm nominal size derived from natural sources).
4.3 Centering and shuttering including strutting, propping etc. and removal of form work for
4.3.1 Foundations, footings, bases for columns 99.00 Sqm ₹ 392.15 ₹ 38,823
REINFORCED CEMENT CONCRETE WORK
5.9 Centering and shuttering including strutting, propping etc. and removal of form for
5.9.1 Foundations, footings, bases of columns etc. for mass concrete. 5.00 sqm ₹ 392.15 ₹ 1,961
5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 48.00 sqm ₹ 842.50 ₹ 40,440
5.9.3 Suspended floors, roofs, landings, balconies and access platform 49.00 Sqm ₹ 927.25 ₹ 45,435
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 36.00 Sqm ₹ 736.40 ₹ 26,510
5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts 96.00 Sqm ₹ 961.30 ₹ 92,285
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and
binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500 D or more. 908.00 kg ₹ 107.85 ₹ 97,928
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure
above plinth level up to floor V level in all shapes and sizes in:
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 11.00 cum ₹ 9,344.35 ₹ 1,02,788
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level.
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 176.00 Sqm ₹ 1,123.80 ₹ 1,97,789
Signature Bidder Page 2 of 90 Signature
Digitally NBCC
signed by SANGRAM
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick
Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to 300 mm thick
with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure
6.47 above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying 23.00 cum ₹ 8,333.65 ₹ 1,91,674
polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of
RCC band and reinforcement shall be made for seperately).
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen
platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and
texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,
8.2 mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give
high gloss finish etc. complete at all levels.
8.2.2 Granite of any colour and shade
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter
8.5 and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, 22.00 each ₹ 978.70 ₹ 21,531
rubbing and polishing of cut edges etc. complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the
manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved
by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3
8.31 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with 220.00 sqm ₹ 1,267.95 ₹ 2,78,949
pigment of matching shade complete.
WOOD AND PVC WORK
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in
position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be
paid for separately).
9.1.1 Second class teak wood (65x125 mm frame) 2.00 cum ₹ 1,42,949.70 ₹ 2,85,899
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block
board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or
9.20 cross bands and face veneers on both faces of shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 93.00 sqm ₹ 3,473.85 ₹ 3,23,068
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of
door shutter to be measured):
Signature Bidder Page 3 of 90 Signature
Digitally NBCC
signed by SANGRAM
9.24.1 Rectangular or square 93.00 sqm ₹ 199.15 ₹ 18,521
9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). 93.00 sqm ₹ 106.70 ₹ 9,923
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat
on unexposed surface etc.
9.40 complete :
9.40.1 2nd class teak wood
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.
including priming coat with approved steel primer all complete.
9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. 87.00 kg ₹ 238.35 ₹ 20,736
9.74 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete
9.81 Providing and fixing bright finished brass handles with screws etc. complete:
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer with IS : 3564,
9.84 embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double 81.00 each ₹ 983.15 ₹ 79,635
speed adjustment with necessary accessories and screws etc. complete
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of
9.88 approved quality with necessary screws etc. complete. 81.00 each ₹ 998.35 ₹ 80,866
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per
IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :
1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade
9.101 AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
9.101.2 Twin rubber stopper 50.00 each ₹ 72.35 ₹ 3,618
Signature Bidder Page 4 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and
fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120
gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and
0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm
dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide
having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and
ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of
studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at
spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on
studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame
work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two
9.105 flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal
flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape,
angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher
and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all
75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board
conformingto IS: 2095: (part I): 2011 (Board with BIS certification marks)
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of
extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm
M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge,
EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using
9.119 M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. 44.00 metre ₹ 492.70 ₹ 21,679
Signature Bidder Page 5 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge
thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of
steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel
of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree
angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm
shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which
75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be
9.120 provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for
top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the
styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with
solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the
'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's
specification & drawing.
9.120.1 30 mm thick plain PVC door shutters 98.00 sqm ₹ 3,182.95 ₹ 3,11,929
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with
high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S,
9.127 including cost of adhesive of approved quality.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a
priming coat of approved steel primer using structural steel etc. as required.
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 220.00 Kg ₹ 172.60 ₹ 37,972
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete
Providing and laying ANTI-SKID rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be
specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement
11.39 slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 150.00 sqm ₹ 1,330.00 ₹ 1,99,500
Signature Bidder Page 6 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade,
laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm
including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero
chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required
thickness, leveling system and rubber mallet for placing the tiles gently and easily
11.41A.2 Glazed vitrified floor tiles polished finish of size
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption
less than 0.08 % and conforming to |.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps,
over 12 mm thick bed of cement mortar 1:3 (1
11.46 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement
& matching pigments etc.
Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear
portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm
(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4
11.51 kg/sqm including pointing
with white cement slurry admixed with pigment to match the marble shade
including rubbing, curing and polishing etc.
11.51.1 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. 1500.00 sqm ₹ 6,603.35 ₹ 99,05,025
Signature Bidder Page 7 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and fixing removable raised/false access flooring with system and its components of approved make for
different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor
panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural
drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form
modular framework, Providing at required spacing to form modular framework, pedestals made out of GI tube of
thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100 mm x 100 mm
x 3 mm at the bottom of the pedestal tube, G.|. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully
threaded stud 16 mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm,
locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor
(base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.b)
Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80 mm thick having
holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum
lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel,
this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum
clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as
per the architectural drawings, as specified and as directed by the Engineer-in-charge. c) Providing and fixing Access
Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade
(FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of
64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot
welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist
epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip
noncombustible Portland cementitious core mixed with light weight foaming compound. The access floor shall be
factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1 mm thickness for superior
adhesion and Surface flatness within 0.75mm. The panel is to withstand a Concentrated Load of 363 kgs applied on
area 25 mm x 25 mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will
withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as
per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be
On the side of the panel to ensure the quality of the product.
11.54.1 300 mm Finished Floor Height (FFH) 50.00 sqm ₹ 5,623.95 ₹ 2,81,198
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear
portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm
11.56 (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing
with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all
complete as specified and as directed by the Engineer-in-Charge
11.56.1 Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent 83.00 sqm ₹ 4,481.30 ₹ 3,71,948
Signature Bidder Page 8 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections,
power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277
and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm
centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,
other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required
size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of
1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of
26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.
intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,
12.45 including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter
of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230
mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall
screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square
edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3
layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per
manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts
made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the
Engineer in Charge but excluding the cost of painting with :
12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board 3905.00 sqm ₹ 1,529.10 ₹ 59,71,136
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on
inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive)
consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30
mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm
thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of
1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum)
sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size
12.52 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening
for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from
ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash
fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm
center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester
paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8
mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with
12.52.2 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of 44.00 sqm ₹ 2,068.75 ₹ 91,025
thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black
Glass fiber acoustical fleece.
Signature Bidder Page 9 of 90 Signature
Digitally NBCC
signed by SANGRAM
12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum
plasterboard,manufactured from natural gypsum as per IS 2095 part | and laminated with white 0.16 mm thick fire
retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the
12.52.3 face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized 58.00 sqm ₹ 2,215.15 ₹ 1,28,479
polyester film so as to make the tile a completely sealed unit.
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of
approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped
galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably
spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced
1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long
spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length
600 mm and size 24 x28 mm made
of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size
600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000mm
made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry
wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved
texture in the grid, including, cutting/ making opening
for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be
suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm
long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at
1200 mm centre to centre along main ‘T’. Bottom exposed with 24 mm of all T-sections shall be pre-painted with
polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :-
Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed
frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50
(Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having
thermal conductivity <0.043 w/mK.
Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m°,
50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held and in
12.62 position by criss cossing GI wire etc. complete as per directions of Engineer-in-Charge. 1210.00 sqm ₹ 322.50 ₹ 3,90,225
Signature Bidder Page 10 of 90 Signature
Digitally NBCC
signed by SANGRAM
13.1 12 mm cement plaster of mix :
Applying priming coat with primer of approved brand and manufacture having low VOC (Volatile organic compound)
13.85.3 Water thinnable cement primer 352.00 sqm ₹ 73.95 ₹ 26,030
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC
less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance
exterior paint of required shade with silicon additives.
New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior
13.48A.1 primer applied @ 0.90 litre/10 sqm. 6677.00 sqm ₹ 181.25 ₹ 12,10,206
13.67 Varnishing with varnish of approved brand and manufacture :
13.67.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish 169.00 sqm ₹ 233.80 ₹ 39,512
13.68 French spirit polishing :
13.68.1 Two or more coats on new works including a coat of wood filler 169.00 sqm ₹ 446.25 ₹ 75,416
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer,
over the plastered wall surface to prepare the surface even and smooth complete.
DISMANTLING AND DEMOLISHING WORK
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard
tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285,
fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,
21.1 bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing
/ paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-
in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
21.1.1 For fixed portion
21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 231.00 kg ₹ 530.90 ₹ 1,22,638
Signature Bidder Page 11 of 90 Signature
Digitally NBCC
signed by SANGRAM
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for
fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be
paid for separately)
21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) 347.00 kg ₹ 634.45 ₹ 2,20,154
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /
neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of
aluminium snap beading shall be paid in basic item):
21.3.1 With float glass panes of 4.0 mm thickness 17.00 sqm ₹ 1,176.80 ₹ 20,006
21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 83.00 sqm ₹ 1,505.25 ₹ 1,24,936
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315,
having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for
doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the
existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc.
complete as per the direction of Engineer-in-charge.
21.4.1 With stainless steel cover plate minimum 1.25 mm thickness 66.00 each ₹ 2,823.85 ₹ 1,86,374
WATER PROOFING WORK
Providing and laying water proofing treatment to vertical and horizontal
surfaces of depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water
proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction
of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand)
mixed with water proofing compound in recommended proportion
22.3 including rounding off junction of vertical and horizontal surface. 110.00 sqmt ₹ 769.60 ₹ 84,656
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7
kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of
PVC sheet should be 100 mm wide and pasted to each other with bitumen
Signature Bidder Page 12 of 90 Signature
Digitally NBCC
signed by SANGRAM
SL.No Description Unit Rate Amount
Providing and fixing Carpet Tile of approved make, shade and pattern and of the following specification:
Loop pile carpet tile of size 250 mm x 1000mm / 500mm x500mm with Tufted 1/10-12" construction, 100%
Solution Dyed Nylon 6 Yarn with secondary backing modified PVC Glass filled having pile height of 3mm
+/- 0.5mm, and maximum total height of 6mm=/- 0.5mm having total weight 4000-5000 g/m2 and pile
above backing 475-550/ m2 tuft density 5100-5800 oz/yd3, chair suitability BS-EN 985 r ≥ 2.4 for
continuous use under chair castors and achieve class: A as per N985, it should dimensionally stable to a
max limit of 0.2% as per ISO 2551 ≤ 0.2%, it should have fire resistance rating of BfI-S1 as per EN 13501-
1, it should achieve permanent anti-static reading < 3000 Volts as per AATCC 134 , it should have sound
MR-1 absorbtion cofficeint of NRC ≥ 0.10, it should achieve a reading of ≥ 4 for colorfastness to light as per 558.00 sqmt ₹ 4,334.17 ₹ 24,18,465
AATCC 16E, it shud achieve a reading of ≥ 4 for rubbing fastness as per AATCC 165, it should achieve a
reading of ≥ 4 for colorfastness to water as per AATCC 107, It should have anti microbial treament as per
AATCC174. Standard carpet warranty is 15 years. All works should be complete as per design/ drawing &
as per direction/ satisafction of Engineer-in-charge.
Providing and laying 6mm-9 mm thick AC5 grade laminate wooden flooring of having
good chair and furniture resistance strength. Plank dimension to be 1215-1220mm *190mm-195mm with
valinge clock locking system and wax coating for better sound resistance. Impact and abrasion resistance
to be of high grade having class EN 13329. The flooring shall be laid with 2mm thick underlay and PVC
MR-2 sheet and prevent against moisture and foot taping sound. All works should be complete as per design/
drawing & as per direction/ satisafction of Engineer-in-charge.
Providing and fixing trap door in false ceiling made of 12mm thk moisture resistant gypsum board fixed on
powder coated Aluminium section frame. Each panel features a push latch closing mechanism with door
retaining safety cable & hook. one stiffener is used upto 900mm Length & two stiffeneres for more than
MR-3 900mm length. The outer frame shall be fixed to false ceiling G.I. sections with necessory screws complete 17.00 each ₹ 8,086.38 ₹ 1,37,468
in all respect to the entire satisfaction of Engineer Incharge.
Supply, installation and placement of Wall Paper Providing & fixing Vinyl Wall covering Roll: with paper back. Shock-
proof and scrape-proof. 100% Washable, Care: neutral home detergents, Resistant to microorganisms, mildew,
MR-4 residual odors. Good light fastness, Peelable. Fire rating: MI. Before hanging, check quality. quantity and colour. to be 165.00 sqmt ₹ 2,256.56 ₹ 3,72,333
fixed with water base glue. all complete as per Architect's Specification. Finished work would be to the satisfaction of
the Enginer in charge.
Signature Bidder Page 13 of 90 Signature
Digitally NBCC
signed by SANGRAM
Blackout Roller Blinds
Providing, supplying and installation of 100% Blackout Roller Blinds containing fabrics with thickness of 0.35 mm,
weight of 360 g/m2, width 300 cm. The composition of fabric will contributes with 100% polyester with acrylic coating
with a low emitting product that reduces the risk of health problems like headache, skin irritation, loss of
concentration and absence of toxic ingredients. Green guard by UL and Fireproof of Fire Classification – M1. The
mechanism of blinds contains the roller tube, shall be of extruded Aluminium alloy 48 mm O.D. with a minimum wall
thickness of 1.0 mm duly anodized for long life. It shall be designed to accommodate spring clutch and gear system.
Spring clutch with gear shall be provided for finger-touch raising and lowering of the blind. Clutch shall be of wrap
spring design with high strength fiberglass reinforced polyester assembly and high carbon steel springs to transmit
motion from driving to driven members of clutch mechanism. Clutch shall be crash proof, prevent slippage and shall
raise and lower smoothly to any desired height. Clutch never needs adjustment. Idler shall be of high strength
fiberglass reinforced polyester, consisting of an outside sleeve and centre shaft. Sleeve shall provide bearing surface
for roller tube and rotate freely on centre shaft, providing smooth, quiet and long wearing operation. Bracket shall be
tomized steel powder coated to give superior finish. Bracket shall accommodate overhead, side or face mounting with
clutch assembly on either end roller. Bottom of blind shall be provided with Aluminium tube powder coated in a
colour matching to the fabric or standard. The fabric shall be enclosed in the suitably created pocket along with the
tube. The tube shall be closed from sides with end caps to give a neat look. The appropriate fixing surface & electrical
connections for motor as per the prerequisites of oem will be provided by the customer etc.
Translucent Roller Blinds
Providing, supplying and installation of Translucent Roller Blinds containing fabrics with thickness of 0.3 mm, weight
of 170 g/m2, width 250 cm. The composition of fabric will contributes with 100% polyester a low emitting product
that reduces the risk of health problems like headache, skin irritation, loss of concentration and absence of toxic
ingredients. Green guard by UL and Fireproof of Fire Classification – M1. The mechanism of blinds contains the roller
tube, shall be of extruded Aluminium alloy 48 mm O.D. with a minimum wall thickness of 1.0 mm duly anodized for
long life. It shall be designed to accommodate spring clutch and gear system. Spring clutch with gear shall be provided
for finger-touch raising and lowering of the blind. Clutch shall be of wrap spring design with high strength fiberglass
reinforced polyester assembly and high carbon steel springs to transmit motion from driving to driven members of
MR-6 clutch mechanism. Clutch shall be crash proof, prevent slippage and shall raise and lower smoothly to any desired 659.00 sqm ₹ 2,167.08 ₹ 14,28,108
height. Clutch never needs adjustment. Idler shall be of high strength fiberglass reinforced polyester, consisting of an
outside sleeve and centre shaft. Sleeve shall provide bearing surface for roller tube and rotate freely on centre shaft,
providing smooth, quiet and long wearing operation. Bracket shall be tomized steel powder coated to giove superior
finish. Bracket shall accommodate overhead, side or face mounting with clutch assembly on either end roller. Bottom
of blind shall be provided with Aluminium tube powder coated in a colour matching to the fabric or standard. The
fabric shall be enclosed in the suitably created pocket along with the tube. The tube shall be closed from sides with
end caps to give a neat look. The appropriate fixing surface & electrical connections for motor as per the prerequisites
of oem will be provided by the customer etc.
Signature Bidder Page 14 of 90 Signature
Digitally NBCC
signed by SANGRAM
Vertical Blinds
The louvers shall be 100mm wide made of fabric woven from polyester viscose yarn dyed in fade resistant colors and
coated to give stability, dust repellence and stain resistance. The fabric shall be 1.2mm to 1.3 mm thick and weight
650gm.per sqm. The louvers shall hang straight and flat without buckling or distortion and striations shall be as per
accepted standard. The head-rail shall be of extruded aluminium alloy measuring 45mm wide and 25mm high with a
minimum wall thickness of 1.10mm. The head-rail shall house all operating components of the blind and shall be
powder paint coated. The carriers shall be made of delrin acetal resin and traverse on two wheels along the guide
slots in the head-rail. Each carrier shall have a self-aligning worm and spur gear mechanism to provide a synchronised
180_ louvre rotation by use of an aluminium alloy tilt rod functioning as a drive shaft between the control box and the
carriers. The spacing of each carrier shall be controlled by a plastic spacer fixed to the carrier body providing a
minimum louvre overlap of 14mm in the fully closed position. The control box shall house the planetary tilt gear hub
MR-7 for turning of the louvres and shall also have rollers for traverse cord. An endless plastic chain shall synchronize and 67.00 sqm ₹ 2,027.27 ₹ 1,35,827
actuate 180- rotation by turning the tilt rod attached to the tilt gear sprocket on the one end and the non-operating
cap on the other end. Louvres shall traverse left to right, right to left or split by means of the traverse cord. Louvres
shall incorporate hem pockets at top and bottom sewn with monofilament clear thread for inserting hanger and
bottom weight- Hanger shall be made of nylon and bottom weight shall be made of galvanised steel moulded with
nylon. Bottom weights shall be connected together on both sides with plastic bead link chain.
The traverse cord shall be tensioned by a cord weight, which shall be removable without detaching cord from
Supply , fitting & fixing of 25MM. thick BWR ply of in sizes on MS understructure in the stepped seminar
MR-8 hall floor including cutting, screwing ; naiiling , adhesive etc. all complete as per design/ drawing & as per 221.00 sqm ₹ 2,510.29 ₹ 5,54,775
direction of Engineer-in-charge.
Providing and fixing frosted film for Glass door and partition as per manufacturer's specifications all
complete as per the satisfaction of Enginner-in-charge.
Supplying and fixing of Slim Glass Internal Partition System & Aluminium profile fixed framed system with
Glass 10 mm clear Toughened / Tempered glass as per approved drawing . Finish All exposed aluminium
sections are BLACK MATT. Fix Glass Panel Aluminium extrusion Profile size 2.5M Section 45x22mm/
50X30mm & 3M Section 45x22mm/ 50X30mm of Black Matt finish with all required Gasket and seal, NO
USE OF SILICONE to fill the gap between the glass to glass, all gaps should be filled with sleek aluminium
'I' Profile 3M BM and 'L' Profile 3M BM of Black Matt finish. Provided profile and accessories shall be
suitable for glass thickness of 10mm the profile manufacturar to has supply all the necessary clips,seals,
cleat and other relevant accessories for system. All Profiles are min 1.5mm thickness excluding 20 microns
of Anodizing, Contactor or Fabricator has to ensure to casing profile to match the all joints properly.
Finished work would be to the satisfaction of the Enginer in charge.
Signature Bidder Page 15 of 90 Signature
Digitally NBCC
signed by SANGRAM
Supply and fixing of Aluminium Glazed Door (Single Leaf with Glass infill of 10mm toughened glass with
rebate door frame System all around the door. Aluminium Stile to be formed out of 70x35mm horizontal
and vertical door profile frame with clips & seals. Door Hardware -Open Door Closer with slide channel and
hold open, offset pull Handle with Narrow stile dead lock package and Door Drop down seal. The Profile
MR-11 and Hardware shall be matt black anodized, including all the necessary clips, seals and fixing accessories 58.00 each ₹ 81,090.87 ₹ 47,03,270
for the system. All Profiles to be with 1.5 mm Gauge thickness excluding 20 Micron of anodizing. Door SIze
- 900mm x 2400mm (but not fixed). All complete as per approved manufacturer's specifications and
directions of the Enginer in charge.
Provising and fixing 5 Knuckle, 2 Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in SSS finish.
Suitable for Metal/ wooden door weighs upto 120kgs. Template Drilled Approved to EN 1935 , Durability -
MR-12 200,000 Cycles, Corrosion Resistance - Very High. Finished work would be to the satisfaction of the 141.00 each ₹ 367.01 ₹ 51,748
Enginer in charge.
Provising and fixing concealed cam action door closer with slide channel arm with standard spindle,
including cushioned limit stay, adjustable closing force EN 2-4 spring size EN 2-4 as per EN 1154 and CE
MR-13 marked. Silver finish. Non-handed. Finished work would be to the satisfaction of the Enginer in charge. 35.00 each ₹ 22,531.24 ₹ 7,88,593
Provising and fixing design Lever Handle on Roses & escutcheons. Including Sash lock with 72mm CTC,
55mm Backset 20mm Square forend. EPC 60mm length both side key operation. Finished work would be
to the satisfaction of the Enginer in charge.
Provising and fixing floor stop half dome with 45mm dia with fixing accessories, in satin Chrome. Finished
MR-15 work would be to the satisfaction of the Enginer in charge. 35.00 each ₹ 402.24 ₹ 14,078
Signature Bidder Page 16 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing & fixing horizontal level suspended ceiling comprising of vertical Linear
Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The
baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain/Plain
finish (Red Oak, Cherry, Black / White). The baffle shall be electrostatically polyester
powder coated to a coating thickness of 60-80 micron. The powder coating shall pass
Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000 hours as per
ASTM G-154 – (Cycle – 1) and Humidity test for 1000hours as per DIN 50017. The
powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation within a
manufacturing batch shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5% at 60˚
as per ASTM D523 (Not applicable of Wood Grain Shade). The baffle blade shall be suspended using
Slotted U-profile of 20 x 30 x 3700mm (Thk- 1.5mm) having slots in module of 25mm to keep baffles at an
on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the
ends to be fixed with End caps.
Properties of Tile Relevant Standards
Base Material Extruded Aluminum Grade 6063-T5
Dimensions 100x25x3600mm (Nominal)
Panel Finish Electrostatically polyester powder coated using RoHS compliant
powder having coating thickness ranging from 60-80 microns. Salt Spray Tested for 750 Hrs/ QUV –A Test
for 1000hours/ Humidity test for 1000hours. Adhesion of GT0 as per EN ISO 2409. The shade variation
within a manufacturing batch shall be delta E<1 using Excite/BYK Gardner instrument and gloss level
25±5% at 60˚. (Not applicable of Wood Grain Shade) ASTM B117 (Salt Spray Test) / ASTM G-154 –
(Cycle – 1) (QUV-A Test) / DIN 50017 (Humidity Test)
EN ISO 2409 (Adhesion)
ASTM D523 (Gloss)
Dimensional tolerances ±2 mm
SUSPENSION: Shall be hanged using baffle hanger from U-profile made of mild steel with powder coating
thickness of 60-80 micron. The U – profile to comprise of alternate square & rectangular slots of
6.5x6.5mm & 28x6.5mm respectively on the web for locking the baffle hanger using plugin clip to secure
the hanger in perfect position and achieve uniform spacing between baffles. The overall dimension of the U
– profile is 20(W) x 30(H) x 3750(L) mm and is rolled form from 1.5mm thick mild steel with a powder
coating thickness of 60-80micron. U- Profile to be connected to each other using U –Profile Splice. The U-
profile shall be hanged from the true ceiling using threaded rod using a U- Profile hanger.
Suspension System Details:
Base Material Mild Steel with powder coating thickness of 60-80micron
Construction Method Roll formed
U- Profile Dimensions 3700(L) x 30(H) x 20(W) mm- Thickness 1.5mm
Hanger-Rod Galvanized M6 Threaded rod (By Other)
Accessories U-Profile Hanger, U- Profile Splice, Baffle Hanger
Installation of U-Grid:
The U profile to be suspended at every 1200mm center to center using 6mm threaded
rod from the structural soffit using U-profile hanger. U-profile splice to be used to join
more than one U profiles of length 3.7M. 1st U-Grid Channel must be no more than
400mm from the perimeter.
Signature Bidder Page 17 of 90 Signature
Digitally NBCC
signed by SANGRAM
thickness of 60-80 micron. The U – profile to comprise of alternate square & rectangular slots of
6.5x6.5mm & 28x6.5mm respectively on the web for locking the baffle hanger using plugin clip to secure
the hanger in perfect position and achieve uniform spacing between baffles. The overall dimension of the U
– profile is 20(W) x 30(H) x 3750(L) mm and is rolled form from 1.5mm thick mild steel with a powder BOQ R1
coating thickness of 60-80micron. U- Profile to be connected to each other using U –Profile Splice. The U-
profile shall be hanged from the true ceiling using threaded rod using a U- Profile hanger.
Suspension System Details:
Base Material Mild Steel with powder coating thickness of 60-80micron
Construction Method Roll formed
U- Profile Dimensions 3700(L) x 30(H) x 20(W) mm- Thickness 1.5mm
Hanger-Rod Galvanized M6 Threaded rod (By Other)
Accessories U-Profile Hanger, U- Profile Splice, Baffle Hanger
Installation of U-Grid:
The U profile to be suspended at every 1200mm center to center using 6mm threaded
rod from the structural soffit using U-profile hanger. U-profile splice to be used to join
more than one U profiles of length 3.7M. 1st U-Grid Channel must be no more than
400mm from the perimeter.
Providing & Fixing Wooden finished Suspended Ceiling System with Wooden Microlook edge tiles and
15mm Suprafine 38 exposed grid. The 18mm thick Tile with perforation shall be made of Medium Density
Fibre of density 700+ Kgs/m3 having perforation of hole diameter 6mm and open area 11% with a linear
pitch of 16mm with a border of 25mm.The tile shall have melamine veneer finish of approved shade
(Portland Maple, Sea Beech, Siam Wood & Mystique Walnut) on visible side and backing veneer (same
shade) on the reverse with 0.8mm matching PVC edge banding in module size of 600mm x 600mm. The
edges of the tile shall be Square Tegular/ Microlook 90˚ having 8mm drop using 3mm thick compact board
spline. Back side of the tile shall have Soundtex fleece hot pressed to achieve NRC of 0.55 (Average value
of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423
and Humidity Resistance (RH) of 70%, with sag limited to 1/300mm. The tile shall have a Fire Performance
of class 1 according to BS 476 part 7.
SUSPENSION: The tile shall be laid on Galvanized Iron suspension system with 15 mm wide T - section
MR-17 flanges having double stroke rotary stitching on all T - sections i.e. the Main Runner, 1200 mm & 600 mm 165.00 sqm ₹ 6,899.71 ₹ 11,38,453
Cross Tees with a web height of 38 (all sections). The deflection loading of the system shall be 15.6 kg/m2
(as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection
limit less than L/360 within suspension points) with deflection loading of 18.6kg/m. The end details of the
main beam and cross tee shall be made of pre hardened steel clip fixed to the ends. The cross tee to
provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to
main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T -
Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted
steel with baked polyester paint with 0T bending capability.
Finished work would be to the satisfaction of the Enginer in charge.
Signature Bidder Page 18 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and Fixing Acoustical clouds which are 30 mm thick, flat glass fibre panels of Humidity
Resistance RH 95%, with embedded frame made of aluminium extruded section of 38X10mm of grade
6063-T6 as per dimension mentioned in below table for reinforcement and secured hanging. Embedded
extrusion shall have grub slot with pre inserted nut for group hanging and connected using Aluminium die
casted corner connector with ¼” – 20 threading for hanging using cable adjuster for independent clouds.
The form of Acoustical cloud Shapes - shall be Square / Convex / Concave / Circle / Hexagon / Trapezoid /
Parallelogram (Left & Right) / Rectangle (Small & Large) in standard Traffic White color with light
reflectance 90% as per ASTM 1477-98 or in the color specified by the Architect / Engineer in charge (Shell
/ Tangerine / Cranberry / Moss / Kiwi / Reef / Lagoon). The Acoustical cloud Shape shall be made of Glass
fibre panel with density of 110-120 Kgs/m3 along with acoustical sound absorbing scrim on the face to
achieve sound absorption as per below mentioned table in accordance to EN ISO 354 :2003 (average of
MR-18 500-4000Hz). The face and edges shall be finished with matching water based texture paint. 83.00 sqm ₹ 19,451.32 ₹ 16,14,460
The panel shall be hanged using deck hanging kit comprising of griper structure anchor & cap of dia.
20mm, spring loaded bottom end cable adjuster of dia. 9mm and 2.4m long aircraft cable of 1/16” dia. The
number of deck hanger will be as per Table 1 above.
Group installation shall be carried out using a secondary structure made of Group framing kit comprising of
Aluminium extruded U-shape section of dimension 25 x 25 x 3658 mm(L) having holes at the bottom at a
pitch of 51mm for connecting section to each other in line / perpendicular using frame splice / frame
alignment kit respectively. The panel shall be hanged to this secondary frame using panel hook for
50/75mm drop having height of 139 & 165mm / 165 & 190mm respectively.
Supply and Installation of glassfibre core , square edge, FR grade, textured finish and are fully
encapsulated panel of size 200x1200x40mm thk saping 150mm to 250mm c/c having volume density
120Kgs/m3 and weight 4.8kg/m2. Each panel is provided with 2 sets of accessories containing Corkscrew,
levelling hook and hanger wires. Corkscrew to be rotated and anchored at top of each panel at two points
to hold the panel stable. Supplied hanger wires to be first dropped from the beam/slab/truss to desired
height with suitable Anchor bolts and S hook.
Acoustical panel are then suspended using spring hooks and hanger wires and levelled into position with
supplied levelling clips.
Technical Parameters
• Fire (Class) – 1 & P
• Acoustics – NRC 0.7 (For J Mounting)
• Thermal conductivity (W/mk)– 0.07
• Climate (°C, RH) – 40, 95
• Light reflectance (%) – 85
• Green (VoC, RC %) – Low, 35
Signature Bidder Page 19 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and Fixing channelled Woodworks perforated panels of width 192mm, thickness of 15mm and
length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the
approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina
Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation
pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove
followed by 13mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips
for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-
woven acoustical fleece hot pressed to achieve NRC of 0.6. (Average value of Absorption Co-efficient
readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance
(RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall
be mounted on special aluminium splines (keel) using inside clips provided by OEM and approved by the
Architect/ Engineer-in-Charge. The panel shall be mounted by tongue and groove mechanism using inside
clip on aluminium extruded keel made of Grade 6063-T5 having dimensions 3000(L) x 24(H) x 15.5(W).The
keel shall also be used for transition of the butt end of adjacent panel at every 7.2m.
Signature Bidder Page 20 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick,
wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper,
Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for
Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or
600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient
readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed
to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or
by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass
substrate shall have a recycle content of 85%.
Properties of Tile Relevant Standards
Base Material Fibre Glass
Panel Dimensions 600mm x 600/1200mm
Panel Thickness 25mm
Panel Finish Acoustically transparent fabric as per the approved shade (Husk,
Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell).
Fire Properties Class A ASTM E-84
Noise Reduction Co-efficient 0.85 ASTM C423 (Average value of Absorption Coefficient readings taken at
250 Hz, 500 Hz, 1000 Hz and 2000 Hz)
Recycled Content 85%
Dimensional tolerances ± 5mm
An appropriate vapour barrier (by others) shall be applied/installed on the vertical
surface before the installation to properly seal against entry of any moisture. Vapour
barrier (by others) shall be installed as per Manufacturer’s recommendation. Install
wooden batten grid (provided by others) of section 50x50mm or as approved by the
Architect on the solid wall/partition to provide level and plumb surface. The Impalers
shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600mm and 4 nos. in case of
600x1200mm. Silica based construction adhesive (by others) to be dabbed on to the projecting elements
(spikes) of the Impalers. Wall Panels
shall be pierced through the spikes of the Impalers ensuring the line and level of the
panels are maintained. Finished work would be to the satisfaction of the Enginer in charge.
Providing and fixing 25mm WPC Louvers panel wall cladding systems, total thickness 25mm panels
compromising of 60% natural wood & 40% recycled polymer of 219x2400mm size. The panel core is made
up of wood ploymer composite & enclosed by hybrid high performance polymer cap (to be installed by an
agency approved by the manufacturer) Glavanized GI substructure of 25mmx50mmx1.6mm metal frames
along with necessary brackets/cleats/screws for fixing of lovers on the metal substructure as per the
instructions to be taken to avoid bimetallic corrosion complete. Finished work would be to the satisfaction
of the Enginer in charge.
GRAND TOTAL ₹ 6,21,82,161
GRAND TOTAL ₹ 6,21,82,161
Signature Bidder Page 21 of 90 Signature
Digitally NBCC
signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED NBCC OFFICE, K-TOWER, WTC,NAUROJI NAGAR
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
1.0 Manufacturing, providing and placing in position machine made factory assembled CMD/CVO Cabin Table
Providing & placing of CMD/CVO Cabin Table with side unit with following details and specification :- Top is made of 70-
80mm thick E-1 Grade MDF (Environmental Friendly) Board with Veneer Finish and Edge banding (PVC) 2mm Table top
having the Key board tray & leatherite samll pad of fixed in center of main table. Table shape is tapered and modesty fixed
in same shape.E1 grade MDF board with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated
method) for better in-house quality.This should comply with (EN 120-1992). Top Supported on hallow Leg of size:
700mmW x150mm , Madeout of 19mm thick E1 grade MDF board with pvc edge banding and other side top supported on
19mmthick E1 grade MDF board frame with Three equal drawer pedestal. The wiring tray is made of steel sheet thickness
1.2mm. Epoxy powder coated spray color, baked at temperature 200 C°. Side Combo Storage: The Combination of Swing
door & open Shlef fot provision of CPU/ Bags. Body of storages made out 19-22 mm thick MDF (E-1 Grade) with Venner
finish with 2 mm PVC edge-banding. E1 grade MDF to be used which provide no urea formaldehyde emission and
formaldehyde should be phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method)
for better in-house quality. This should comply with (EN 120-1992). Storages should be provided with adjustable levelers.
Door Lock should be of three-way lock mechanism, the hinged doors can be locked at once. Door should be provided with
Hinge-damping mechanism to enable soft closing of doors.Product should be BIFMA gold rated SCSglobal certified for
inhouse air quality and with 05 years warranty.
Low Height Back Storage: Body of storages made out 19 mm thick (E1 Grade) MDF board with 0.4mm veneer with PVC
edge-banding. wooden shutter madeout of E1 grade MDF to be used which provide no urea formaldehyde emission and
formaldehyde should be phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method)
for better in-house quality & Glass shutter made out of wooden frame with 4mm thick clear glass. All shelf are adjutable.
This should comply with (EN 120-1992).The storage should have extruded aluminum handle/ recess handle , as per
requirement. Storages should be provided with adjustable levelers. Door Lock should be of three-way lock mechanism, the
hinged doors can be locked at once. Door should be provided with Hinge-damping mechanism to enable soft closing of
doors.Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
CMD Cabin Table is of Size: 3300mm(L1) x 2400mm(L2) x 1200mm(D1) x 520-550mm(D2)x 740-760mm(H1)/580-
CVO Cabin Table is of Size: 3000mm(L1) x 2350mm(L2) x 1150mm(D1) x 520-550mm(D2)x 740-760mm(H1)/580-
Signature Bidder Page 22 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
1.3 CMD/ CVO Cabin Back Storage of size: 2400Wx 400D x 900Hmm Nos. 2 2,31,269.98 4,62,539.96
2.0 Manufacturing, providing and placing in position machine made factory assembled Director Cabin Table -
Providing & Placing of Director Cabin Table with side unit with following details and specification :- whose top is made of 50-
55mm thick E1 grade MDF (Environmental Friendly) with 0.4mm thick Veneer Finish, With Key board tray & Leatherite pad
on the main table , size of leatherite is 900-1200Wx 460-560Dmm , with edge banding. E1 grade MDF with zero urea
formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should
comply with (EN 120-1992). The Closed wiring tray is made of steel sheet thickness 1.2mm. Epoxy powder coated spray
color, baked at temperature 200 C°. Below the acess flap/ axial box ( 2-3 nos socket/Switch), Top supported on one side
suspended combo storage & One side Three drawer unit of size: 560Wx 670Dx 680Hmm with Dummy Box which is fixed
with modesty panel, Drawer & Modesty are made of 19mm thick E1 grade MDF Board (Environmental Friendly) with
0.4mm thick Veneer Finish, Drawer unit & side combo storage connecting with 19mm thick MDF modesty panel with
matching finish cover Edge banding (PVC) . E1 grade Veneer MDF with zero urea formaldehyde emissions (<or= 8mg/100 g
oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992). Side Combo -
Storage: Body of storages made out 19 mm thick (E1 Grade) MDF board with 0.4 mm veneer with PVC edge-banding. Side
Combo Storage is combination of 2nos swing shutter & Open space, E1 grade MDF to be used which provide no urea
formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or= 8mg/100 g oven
dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992).The storage should have
extruded aluminum handle, as per requirement. Storages should be provided with adjustable levelers. Door Lock should be
of three-way lock mechanism, the hinged doors can be locked at once. Door should be provided with Hinge-damping
mechanism to enable soft closing of doors.Product should be BIFMA gold rated SCSglobal certified for inhouse air quality
and with 05 years warranty.
Low height back storage: Body of storages made out 19 mm thick (E1 Grade) MDF board with 0.4mm veneer with PVC
edge-banding. shutter madeout of E1 grade MDF to be used which provide no urea formaldehyde emission and
formaldehyde should be phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method)
for better in-house quality . All shelf are adjutable. This should comply with (EN 120-1992).The storage should have
extruded aluminum handle/ recess handle , as per requirement. Storages should be provided with adjustable levelers. Door -
Lock should be of three-way lock mechanism, the hinged doors can be locked at once. Door should be provided with Hinge-
damping mechanism to enable soft closing of doors.Product should be BIFMA gold rated SCSglobal certified for inhouse air
quality and with 05 years warranty.
Director Cabin Table of Size: 3000mm(L1) x 2400mm(L2) x 1050mm(D1) x 600-650mm(D2)x 740-760mm(H1)
2.2 Director Cabin Back Storage of size: 2800Wx 400D x 740Hmm Nos. 3 1,96,841.26 5,90,523.79
Signature Bidder Page 23 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
3.0 Manufacturing, providing and placing in position machine made factory assembled Cabin Table -
Providing & Placing of Cabin Table with side unit with following details and specification :- Providing and placing table
Whose chamfered edge top and legs are made of 38mm. thick Particle Board (E-1 Grade), melamine finishes with matched
2 mmProv PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-
perforated method) for better in-house quality. This should comply with (EN 120-1992). The Modesty is Particle board
wood Grade E-1 (Environmental Friendly) thicness 16 mm cover with Melamine Edge-Banding(PVC) 2 mm. Also legs are
made of Particle board wood Grade E-1 (Environmental Friendly) thicness 38 mm, cover with Melamine. Drawer Unit : 3
drawer Metal pedestal of overall dimensions internal and external dimensions 380-430 mm (W) x 430-480 mm (D) x 600-
620 mm ( H). Drawer body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 micron. Each
pedestal should be provided with pencil tray of 40-45 mm(H) x 110-120 mm (D) x 300-310 mm (W).Each pedestal should
have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra stability. Low Height
Swing Door Storage, Body of storages made out 18 mm thick Particle Board (E-1 Grade), melamine finishes with 2 mm PVC -
edge-banding. E1 grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be
phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method) for better in-house
quality. This should comply with (EN 120-1992). Front of Low height Storages should be made out of 16 mm thick Particle
Board (E-1 Grade),melamine finishes with 2 mm. PVC edge-banding fitted with extruded aluminum handle, as per
requirement. Storages should be provided with adjustable levelers. Door Lock should be of three-way lock mechanism, the
hinged doors can be locked at once. Door should be provided with Hinge-damping mechanism to enable soft closing of
doors. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
Secretary ( CMD/ CVO/ Director) Table of Size: 2400mm(L1) x 1950mm(L2) x 900mm(D1) x 500-600 mm(D2)x 740-
ED/SR Table of Size: 2100mm(L1) x 1950mm(L2) x 900mm(D1) x 500-600 mm(D2)x 740-760mm(H1)/620-640mm(H2).
3.3 Back Storage of size:2100Wx 450D x 740-760mm(H). Nos. 8 85,660.63 6,85,285.00
4.0 Manufacturing, providing and placing in position machine made factory assembled Cabin Table -
Providing and placing of table Whose top and legs are made of 25mm. thick Particle Board (E-1 Grade), melamine finishes
with matched 2 mmProv PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g
oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992). The Modesty is
Particle board wood Grade E-1 (Environmental Friendly) thicness 16 mm cover with Melamine Edge-Banding(PVC) 2 mm.
Also legs are made of Particle board wood Grade E-1 (Environmental Friendly) thicness 25 mm, cover with Melamine.
Drawer Unit : 3 drawer Metal pedestal of overall dimensions internal and external dimensions 380-430 mm (W) x 430-480
mm (D) x 600-620 mm ( H). Drawer body should be made of CRCA of thickness 0.7-0.8 mm duly powder coated with 70-80 -
micron. Each pedestal should be provided with pencil tray of 40-45 mm(H) x 110-120 mm (D) x 300-310 mm (W).Each
pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer to provide extra
stability.. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
Low Height Swing Door Storage, Body of storages made out 18 mm thick Particle Board (E-1 Grade), melamine finishes with
2 mm PVC edge-banding. E1 grade laminate to be used which provide no urea formaldehyde emission and formaldehyde
should be phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method) for better in-
house quality. This should comply with (EN 120-1992). Front of Low height Storages should be made out of 16 mm thick
Particle Board (E-1 Grade),melamine finishes with 2 mm. PVC edge-banding fitted with extruded aluminum handle, as per
requirement. Storages should be provided with adjustable levelers. Door Lock should be of three-way lock mechanism, the
hinged doors can be locked at once. Door should be provided with Hinge-damping mechanism to enable soft closing of
doors. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
Signature Bidder Page 24 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
Secretary ( CMD/ CVO/ Director) Cabins Tables of size :MainTable 1800W x800D x 740-760Hmm, Return Table :1050W x
GM Table of Size: 1650mm(L1) x 1650mm(L2) x 750mm(D1) x 500-600 mm(D2)x 740-760mm(H1)/620-640mm(H2).
Cubical Cabins Tables of size :MainTable 1500W x750D x 740-760Hmm, Return Table :900W x 450D x740-760Hmm
4.4 Free Standing Table : 1500Wx 750Dx 740-760Hmm Nos. 1 47,284.67 47,284.67
4.5 GM Cabins Back Storage of size: 1350W x 450D x 740-760Hmm Nos. 27 42,487.67 11,47,167.09
5.0 Manufacturing, providing and placing in position machine made factory assembled Workstations -
Providing and placing Hybrid Panel based Workstations with following specifications:Frame Work, Partition and Cable
management : Frame work shall consist of main spine and return spine of aluminium extruded section of minimum
thickness of 1.2 mm. The overall thinkness of Panel base System should be minimum 60-70 mm. The thickness of main
spine partition panel should be minimum 60-70 mm, The thickness of Return spine partition panel should be minimum 25-
30 mm. The panel will be hollow inside to accommodate wiring for electrical/data and outer frame of panel should be
made of extruded aluminium.The panel shall be made up of 3 mm thick MDF both sides of the wooden frame to create the
hollow for the wire management. The panel outer aluminium frame is designed in such a way that it can be easily slide in to
the columns/ Connectors by means of stacking one over the other. Horizontal race way should be 150-170 mm height
aluminium profile. There shall be complete cable management arrangement with openable raceway above/ below worktop
with provision for fitting electrical/data switches and holes for passing cable.Panel Finishes : Finishes of panel above the
worktop can be fabric pinup/fabric/laminate + Glass/metal writable marker board or single finish tile with raceway on -
main spine. Finishes of main spine panel below the worktop the hollow panel should be made of MDF tile and 0.5mm thick
steel sheet pasted on MDF which is powder coated with EPC finish 80-90 microns for durability on the inside as well on the
outside. Raceway can be provided above/below the worktop.Connectors/ Brackets: End Post: Aluminium 60-70 mm width
– 1180-1220 mm height.Two way post: Aluminium 30-70 mm width –1180-1220 mm height.Three way post: Aluminium 30-
70 mm width –1180-1220 mm height.Four way post: Aluminium 30-70 mm width – 1180-1220 mm height.Brackets: Table
top supported with 50-60mm width steel bracket. Table top to table top connector: 150-170 mm Width x 120-140 mm
Depth width connector.
Worktop :Worktop Made of 25mm thick E-1 grade particle board finished with 2mm ABS edge banding. E1 grade laminate
with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house air
quality. This should comply with (EN 120-1992). The exposed edge of worktop shall be secured with 2mm thick PVC edge
banding tape of approved colour. The height of Worktop shall be 740-760 mm from ground level. The particle board should
be E-1 Grade with pvc edge banding. Drawer Unit : 3 drawer Metal pedestal of overall dimensions internal and external
dimensions 400 mm (W) x 450 mm (D) x 600 mm ( H). Drawer body should be made of CRCA of thickness 0.7-0.8 mm duly -
powder coated with 70-80 micron. Each pedestal should be provided with pencil tray of 40-45 mm(H) x 110-120 mm (D) x
300-310 mm (W).Each pedestal should have 5 Nos castor fitted to it where in one castor will be fitted to lower most drawer
to provide extra stability. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality. .
5.1 Linear Workststion of size: 1500Wx 600D x 1180/ 740mm(Worktop Height) x 1180-1220 mm Nos. 36 71,269.64 25,65,707.04
L Shape Workststion of size: 1500W1 x 1500W2x 600D1/D2 x 1180/ 740mm(Worktop Height) x 1180-1220 mm
Signature Bidder Page 25 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
Manufacturing, providing and placing in position machine made factory assembled medium Height Partition for Office
Providing and placing of medium height panel: Frame Work, Partition and Cable management : Frame work shall consist of
main spine and return spine of aluminium extruded section of minimum thickness of 1.2 mm. The overall thinkness of
Panel base System should be minimum60-70 mm. Panel divide in three parts, lower panle, midddle Panel & upper panel,
The panel will be hollow inside to accommodate wiring for electrical/data and outer frame of panel should be made of
extruded aluminium.The panel shall be made up of 3 mm thick MDF both sides of the wooden frame to create the hollow
for the wire management.Finishes of panel above the worktop: Above the top Middle Panel fabric pinup/ Glass writable
marker board and upper panel finish is clear glass (4mm). The hollow panel made of MDF and 3mm thick foam which is
upholstered with 0.5mm thick fabric with half fabric pinup/ half glass marker board/ 4mm thick clear glass. The thickness
of main spine partition panel should be minimum 60-70 mm thick .Finishes of main spine panel below the worktop: Below
the top the hollow panel should be made of MDF tile and 0.5mm thick steel sheet pasted on MDF which is powder coated
with EPC finish 80-90 microns for durability on the inside as well on the outside.The panel outer aluminium frame is Sqmt 19 18,502.70 3,51,551.21
designed such a way that it can be easily slide in to the columns/ Connectors by means of stacking one over the other.
Horizontal race way should be 150-170 mm height aluminium profile. There shall be complete cable management
arrangement with openable raceway above/ below worktop with provision for fitting electrical/data switches and holes for
passing cable. Connectors/ Post Description: End Post: Aluminium 60-70 mm width – 1450-1500 mm height.
Two way post: Aluminium 30-80 mm width –1450-1500 mm height.
Three way post: Aluminium 30-80 mm width – 1450-1500 mm height.
Four way post: Aluminium 30-80 mm width – 1450-1500 mm height.Product should be BIFMA gold rated SCS global
certified for inhouse air quality and with 05 years warranty.
7.0 Manufacturing, providing and placing in position machine made factory assembled Meeting Rooms Table of -
Providing & Placing of Conference Table, whose top and legs are made of 38 mm. thick Particle Board (E-1 Grade),
melamine finishes with matched 2 mm PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions (<or=
8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992). The
Modesty is Particle board wood Grade E-1 (Environmental Friendly) thicness 18 mm cover with Melamine Edge-
Banding(PVC) 2 mm. Wire management: Access Flap and Switch Mounting Tray is provided in the table. It is Made from
Matt silver Anodized Aluminium extrusion and plastic moulded components to facilitate access of Electrical/Data/Voice
sockets access from Top. Powder coated switch mounting tray made from 0.8mm and 1.2mm MS sheet(IS:513) which is -
powder coated 80-90micron. Switches to be mounted on tray as per requirement. Provision for mounting 8Module Switch
plate on switch mounting tray shall be provided. Product should be BIFMA gold rated SCSglobal certified for inhouse air
quality and with 05 years warranty.
7.2 Boat Shape Meeting Table: 4050W x 1500W2 x 1050D x 740-760Hmm Nos. 1 1,73,000.20 1,73,000.20
7.3 Boat Shape Meeting Table: 4800W x 1500W2 x 1050D x 740-760Hmm Nos. 4 2,35,738.04 9,42,952.16
7.5 Round Meeting Tableof size: 1000mm dia x 740-760Hmm Nos. 1 82,919.49 82,919.49
6.0 Manufacturing, providing and Placing High Back revolving chairs for CMD/CVOr Cabin Main Chair -
Providing and placing in position high back chair for Cabins with comfortable Backrest .Overall Size is : W 680 x D x 680X
1125-1215Hmm , Seat Size: 490Wx 450Dx 435-525Hmm ,Chair Seat in leatheritte upholstery with headrest - Size: W722 x
D712 x H1058 - 1185 mm having SW505 x SD394 - 470 x SH419 - 546 mm ,Seat, Back: Mesh back, with Seat depth
adjustment Back: Flexible back with built in fronds wrapped with lofted mesh Arms:4D Armrests Lumbar: No external
lumbar support. In built back support along the cradle providing total back support Mechanism: Synchronized 3-point tilt, Nos. 3 1,03,478.04 3,10,434.11
Pneumatic Height Adjustable & 6 Position Back Lock. Back Recline :Back reclines 24 degrees from the upright position,
Edgeless back.Product should be BIFMA gold rated SCS global certified for inhouse air quality and with 05 Years warranty.
Signature Bidder Page 26 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
7.0 Manufacturing, providing and Placing Mid Back revolving chairs for CMD/CVO Cabin Mid back visitor Chair - -
Providing and placing in position Mid back chair for Cabins With comfortable Backrest. Overall Size is : W 680 x D x 680X
960-1050Hmm , Seat Size: 490Wx 450Dx 435-525Hmm , Chair Seat in leatheritte upholstery- Size: W722 x D712 x
H955mm,Back: Mesh back,Seat : Leatherite Upholstered with Seat depth adjustment, Seat Pan Height adjustment:406mm-
533mm Arms: 4D armrests, Mechanism: Balanced 3 point tilting mechanism,Pneumatic Height Adjustable & 6 Position
Back Lock, Back Recline :Back reclines 18 degrees from the upright position, Torsional flex in the back, Lumbar: Asymetrical Nos. 24 95,939.90 23,02,557.60
lumbar support adjustment, height adjsutable, Base: Five-star Black Polished Aluminium Base with castors Option
Hard/Soft;Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 Years warranty.
8.0 Manufacturing, providing and Placing High Back revolving chairs for Director Cabin/ Board Room Main Chair -
Providing and placing in position high back chair for Cabins with comfortable Backrest,The seat shall be made up of 12mm
thick hot pressed plywood & upholstered with leatherite and moulded medium density foam. Overall dimensions of Chair
shall be, Width of Chair - 640mm, Depth of Chair - 645mm, Height of Chair-1185-1245mm as measured till pedestal . The
back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-510+10m, H-715mm &
size of seat shall be W-520+10 mm x D-450mm x H-473-533mm. Medium density foam should be used in making seat &
back which shall be moulded with density 45kg/m ³ and hardness load 16kgf. The seat and back should be arrested
together with spine made of 8mm thick HR steel and should be powder coated in black with 40-60 micron . The fixed
armrest are made of aluminuim with PU padded. The mechanism of the chair shall have following features : 360 degree
swivel type, Knee Tilt mechanism, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground
ensuring more comfort, multiple locking position. Gas lift allows 10mm of height adjustment. The pedestal shall be made
of die-cast aluminium base. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 670mm pitch-
centre-dia 700-720mm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color.
Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 Years warranty.
Manufacturing, providing and Placing Mid Back revolving chairs for Director Cabin / Board Room Mid back visitor Chair
Providing and placing in position Mid back chair for Cabins With comfortable Backrest. The seat shall be made up of 12mm
thick hot pressed plywood & upholstered with Leatherite and moulded medium density foam. Overall dimensions of Chair
shall be, Width of Chair - 640mm, Depth of Chair - 620mm, Height of Chair-1000-1065mm as measured till pedestal . The
back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-490+10m, H-530mm &
size of seat shall be W-500+10 mm x D-450mm x H-470-530mm. Medium density foam should be used in making seat &
back which shall be moulded with density 45kg/m ³ and hardness load 16kgf. The seat and back should be arrested
together with spine made of 8mm thick HR steel and should be powder coated in black with 40-60 micron . The fixed
armrest are made of aluminuim with PU padded. The mechanism of the chair shall have following features : 360 degree
swivel type, Knee Tilt mechanism, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground
ensuring more comfort, multiple locking position. Gas lift allows 10mm of height adjustment. The pedestal shall be made
of die-cast aluminium base. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 670mm pitch-
centre-dia 700-720mm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color.
Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
Signature Bidder Page 27 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
Manufacturing, providing and Placing High Back revolving chairs for Cabin/ Meeting Room
Providing and placing High Back chairs for Cabin / Meeting Room. seat made up of insert moulded Polyurethane Foam
upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing plastic seat cover, back
is made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and mounted on the main
assembly, back adjustable lumbar support for achieving comfortable seating posture, seat size 44.5 - 52.5 cm depth
(approx.), 46.4 - 51.0 cm width (approx.), sub assembly back size 55.5 cm- 62 cm height. (approx.), effective back height
from Seat - 57 cm (approx.), polyurethane foam for seat having density 65±4 kg/m3, armrest top injection moulded in
polyurethane and mounted on the injection moulded height adjustable type armrest, armrest height adjustable up to 4.5
cm (approx) in 3 steps & width movement adjustable, 360 degree revolving type. mechanism, single point control for seat
and back adjustment, front pivot for tilt, tilt adjustment for back in 3position locking with antishock feature, pneumatic Nos. 9 36,320.11 3,26,880.95
height adjustment of 8.5 cm spine bracket made of aluminum die cast piece connecting to back with mechanism, pedestal
made of die cast alunimium fitted with 5 nos. twin wheel castors (castor wheel dia. 6.0 cm approx.), base pedestal dia
65.0cm (approx.) and pitch center dia. 71.0 cm with castors, twin wheel castors injection moulded in Nylon etc. all
complete as per manufacturers specification, approved sample and direction of Engineer-in-Charge. Product should be
BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
11.0 Manufacturing, providing and Placing Mid Back revolving chairs for Cabin Visitor / Meeting Room -
Providing and placing Mid Back chairs for Cabin Visitor / Meeting Room .Chair seat made up of insert moulded
Polyurethane Foam upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing
plastic seat cover, back is made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and
mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture, seat size 44.5 -
52.5 cm depth (approx.), 46.4 - 51.0 cm width (approx.), sub assembly back size 55.5 cm- 62 cm height. (approx.), effective
back height from Seat - 57 cm (approx.), polyurethane foam for seat having density 65±4 kg/m3, armrest top injection
moulded in polyurethane and mounted on the injection moulded height adjustable type armrest, armrest height
adjustable up to 4.5 cm (approx) in 3 steps & width movement adjustable, 360 degree revolving type. mechanism, single
point control for seat and back adjustment, front pivot for tilt, tilt adjustment for back in 3position locking with antishock Nos. 168 32,208.40 54,11,010.36
feature, pneumatic height adjustment of 8.5 cm spine bracket made of aluminum die cast piece connecting to back with
mechanism, pedestal made of die cast alunimium fitted with 5 nos. twin wheel castors (castor wheel dia. 6.0 cm approx.),
base pedestal dia 65.0cm (approx.) and pitch center dia. 71.0 cm with castors, twin wheel castors injection moulded in
Nylon etc. all complete as per manufacturers specification, approved sample and direction of Engineer-in-Charge. Product
should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
12.0 Manufacturing, providing and Placing High Back revolving chairs for Cabin Main Chair -
Signature Bidder Page 28 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
Providing and placing High Back chairs Cabin. Chair Overall size: 680Wx 680Dx 1125-1215Hmm, Chair seat made up of
insert moulded Polyurethane Foam upholstered with foam laminated mesh fabric, insert moulded foam assembled over a
load bearing plastic seat cover, back is made up of two piece injection moulded frame, inner frame upholstered with mesh
fabric and mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture, seat
size 450 - 460 mm depth (approx.), 490 - 500 mm width (approx.), sub assembly back size 540 mm- 620 mm height.
(approx.), effective back height from Seat - 560-570 mm (approx.), polyurethane foam for seat having density 65±4 kg/m3,
armrest top injection moulded in polyurethane and mounted on the injection moulded height adjustable type armrest,
armrest height adjustable up to 4.5 cm (approx) in 3 steps & width movement adjustable, 360 degree revolving type.
mechanism, single point control for seat and back adjustment, front pivot for tilt, tilt adjustment for back in 3position
locking with antishock feature, pneumatic height adjustment of 8.5 cm spine bracket made of aluminum die cast piece
connecting to back with mechanism, pedestal made of die cast alunimium fitted with 5 nos. twin wheel castors (castor
wheel dia. 6.0 cm approx.), base pedestal dia 65.0cm (approx.) and pitch center dia. 71.0 cm with castors, twin wheel
castors injection moulded in Nylon etc. all complete as per manufacturers specification, approved sample and direction of
Engineer-in-Charge. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years
13.0 Manufacturing, providing and Placing Mid Back revolving Visitor chairs for Cabin -
Providing and placing Mid Back chairs for Cabin Visitor Chair Chair Overall size: 680Wx 680Dx 9605-1050Hmm, , Chair seat
made up of insert moulded Polyurethane Foam upholstered with foam laminated mesh fabric, insert moulded foam
assembled over a load bearing plastic seat cover, back is made up of two piece injection moulded frame, inner frame
upholstered with mesh fabric and mounted on the main assembly, back adjustable lumbar support for achieving
comfortable seating posture, seat size 450 - 460 mm depth (approx.), 490 - 500 mm width (approx.), sub assembly back
size 540 mm- 620 mm height. (approx.), effective back height from Seat - 560-570 mm (approx.), polyurethane foam for
seat having density 65±4 kg/m3, armrest top injection moulded in polyurethane and mounted on the injection moulded
height adjustable type armrest, armrest height adjustable up to 4.5 cm (approx) in 3 steps & width movement adjustable,
360 degree revolving type. mechanism, single point control for seat and back adjustment, front pivot for tilt, tilt adjustment Nos. 90 22,545.88 20,29,128.89
for back in 3position locking with antishock feature, pneumatic height adjustment of 8.5 cm spine bracket made of
aluminum die cast piece connecting to back with mechanism, pedestal made of die cast alunimium fitted with 5 nos. twin
wheel castors (castor wheel dia. 6.0 cm approx.), base pedestal dia 65.0cm (approx.) and pitch center dia. 71.0 cm with
castors, twin wheel castors injection moulded in Nylon etc. all complete as per manufacturers specification, approved
sample and direction of Engineer-in-Charge. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality
and with 05 years warranty.
Manufacturing, providing and Placing Mid Back revolving chairs for Workststion/ Reception & Staff table chair
Signature Bidder Page 29 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
Providing and placing Mid Back chairs for Workststion/ Reception & Staff table chair. Chair seat made up of insert moulded
Polyurethane Foam upholstered with foam laminated mesh fabric, insert moulded foam assembled over a load bearing
plastic seat cover, back is made up of two piece injection moulded frame, inner frame upholstered with mesh fabric and
mounted on the main assembly, back adjustable lumbar support for achieving comfortable seating posture, Overall chair
size: W61.0 -62.0cms , D 61.0-63.0cm , H96.0-105.0cm, Seat size 46.5 - 51.5 cm depth (approx.), 45.4 - 51.0 cm width
(approx.), sub assembly back size 55.5 cm- 62 cm height. (approx.), effective back height from Seat - 57 cm (approx.),
polyurethane foam for seat having density 65±4 kg/m3, armrest top injection moulded in polyurethane and mounted on
the injection moulded height adjustable type armrest, armrest height adjustable up to 4.5 cm (approx) in 3 steps & width
movement adjustable, 360 degree revolving type. mechanism, single point control for seat and back adjustment, front Nos. 209 19,530.62 40,81,900.10
pivot for tilt, tilt adjustment for back in 3position locking with antishock feature, pneumatic height adjustment of 8.5 cm
spine bracket made of aluminum die cast piece connecting to back with mechanism, The pedestal shall be made of nylon
base.it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 670mm pitch-centre-dia 700-720mm
with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. Product should be BIFMA
gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
15.0 Manufacturing, providing and Placing Medium height Storages -
Providing & Placing of Medium Height metal storage with wooden shutter & top. Storage body and shelf shall be made
of 0.8mm CRCA steel sheet, Shelves and doors should have stiffeners for better strength and load bearing capacity.
Auto engineer in charge)Hinges for better adjustment of doors. Chrome plated three way Recess type spring loaded
rectangular snap shut handle cum lock with duplicate keys. Stoarage unit shall be made of 100% virgin Epoxy
Powder Coated CRCA steel confirming to IS : 513 CR2 (Cold Reduced Carbon Steel Sheets & Strips (Part 1), 2016, procured
from primery manufacturers (Manufacturer Test Certificate to be produced). Furthermore,Complete material shall pass
through 7 stage, NANO- TECHNOLOGY based Pre-treatment plant prior to powder coating to make corrosive resistant.
Powder coating should be done on Fully Automatic Powder Coating Plant to ensure smooth, uniform and highest quality -
levels of Powder Coating.Each Compartment's shelf should have uniformly distributed load capacity of >35 kg. Front of
Medium height Storages should be made out of 16 mm thick Particle Board (E-1 Grade), melamine finish with 2mm PVC
edge- banding fitted with extruded aluminum handle as per requirement. Storages should be provided with adjustable
levelers Door Lock should be of three- way lock mechanism. Door should be provided with Hinge-damping mechanism
to enable softclosing of doors. Product should be BIFMA gold rated SCS global certified for inhouse air quality and with 05
years warranty.
Manufacturing, providing and placing in position machine made factory assembled Sofas for lobby & waiting Area
Providing & Placing sofa with following specification ,Wooden structure of sofa to be fabricated using good quiality
hardwood duly seasoned and applying anti-termite paint of approved brand & manufacture to ensure stability of the
frame, On the wooden base frame of the sofa to be provided with M.S. helical spring, 1 side & 2 back with jute strips, with
polyfill covered with jute & finished with thick marking cloth before doing fina finished with fabric (Titch). Seat - 40-45-
32Kg/cum density PU Foam, 100mm thick, Back - 35-40Kg/cum density PU foam, 60mm thick, Sides (inside) - 40-45 Kg/cum
density PU Foam, 45 mm thick Sides (outside) & back (back side) - 35-40 Kgcum density PU foam, 25mm thick. Seat shall
rest on SS frame supported on legs made of SS chrome plated section of cone shape of height 225mm. All SS work should
be in grade 304. Base of sofa should be made of 225mm H SS chrome plated curved base so as to give proper support to -
the seat. Height of the base of sofa shall be 200-250mm(approx). Finished width of arm shall be 100mm after upholstery
work. Sofa to be fully upholstered using approved fabric (titch) of A grade of desired shade duly embossed including
providing & fixing of all other related materials including hardwares etc. The sofa shall be provided with adjuster made uup
of injection plastic in black color. The sofa can should be configured in different form as per the client requirement.
Complete as directed by the Engineer in charge.
Signature Bidder Page 30 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
16.1 3 seater sofa overall dimension - 2050mm W x 760-780mm D x 680-700mm H Nos. 7 80,109.82 5,60,768.72
16.2 2 seater sofa overall dimension - 1550mm W x 760-780mm D x 680-700mm H Nos. 9 63,388.86 5,70,499.76
16.3 1 seater sofa overall dimension - 810mm W x 760-780mm D x 680-700mm H Nos. 3 39,746.53 1,19,239.59
17.0 Manufacturing, providing and placing in position machine made factory assembled Sofas for Other Cabins - -
Providing & Placing sofa, with wooden structure fabricated using hardwood of approved quality, duly seasoned and anti-
termite treated with approved chemical and methodology.The wooden base frame of the sofa shall be provided with M.S.
helical spring along with high quality elastic belt 70-80mm, sides & back with 40-60mm elastic belt, seat & back covered
with jute & foam covered with Polyfilla & finished with thick marking cloth before doing final finish with leatherette
material The component specification shall be as follows Seat- 40-45Kg/cum density PU Foam, 100mm thick, Back– 32 -
40Kg/cum density PU foam, 50mm thick, Sides (inside)- 32-40 Kg/cum density PUFoam, 11mm thick Sides (outside)
&back (back side) - 35-40 Kg cum density PU foam, 13mm thick. Seat shell rest on Wooden Legs supported solid
wooden section of height 50-180mm. All Wooden work should be in White Ash / Teak wood polish with melamine & p.u
coat Base of sofa should be infilled with suitable wooden sections so as to give proper support to the seat Height of the
base of sofa. sofa shall be 75-220mm (Approx). Finished width of arm shall be 100 - 180mm (Approx) after upholstery work.
Sofa to be fully upholstered using leatherette material of approved quality and shade , duly embossed including providing
& fixing of all other required materials and hardware etc. all complete as directed by the Engineer in charge. Product
should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
17.1 3 seater sofa overall dimension - 1860mm W x 820-860mm D x 780-820mm H, Nos. 9 65,787.36 5,92,086.24
17.2 2 seater sofa overall dimension - 1460mm W x 820-860mm D x 780-820mm H, Nos. 24 43,858.24 10,52,597.76
Signature Bidder Page 31 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
18.0 Manufacturing, providing and placing in position machine made factory assembled Sofas for Cabins - -
Providing & Placing sofa, Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and
applying anti-termite paint of approved brand & manufacture to ensure stability of the frame, On the wooden base frame
of the sofa to be provided with M.S. helical spring, sides & back with jute strips, with polyfill covered with jute & finished
with thick marking cloth before doing final finished with leathrite have basic cost not less than 1000/- Pet Mt. Seat - 40-
45Kg/cum density PU Foam, 100mm thick, Back - 35-40Kg/cum density PU foam, 60mm thick, Sides (inside) - 40-45 Kg/cum
density PU Foam, 45 mm thick Sides (outside) & back (back side) - 35-40 Kgcum density PU foam, 25mm thick. Seat shall
rest on SS square frame of size 25mm x 25mm supported solid wooden section of height 225mm. All SS work should be in
grade 304. Base of sofa should be infilled with suitable woode sections so as to give proper support to the seat. Height of - -
the base of sofa shall be 200-250mm(approx). Finished width of arm shall be 100mm after upholstery work. Sofa to be fully
upholstered using approved leatherite of A grade of desired shade duly embossed including providing & fixing of all other
related materials including hardwares etc. complete as directed by the Engineer in charge. Product should be BIFMA gold
rated SCSglobal certified for inhouse air quality. Product should be BIFMA gold rated SCS global certified for inhouse air
quality and with 5 years warranty.
19.1 3 seater sofa overall dimension - 2050mm W x 640-680mm D x 700-740mm H, Seating Height 425mm Nos. 9 63,046.22 5,67,415.98
19.2 2 seater sofa overall dimension - 1590mm W x 640-680mm D x 700-740mm H,Seating Height 425mm Nos. 3 43,858.24 1,31,574.72
19.2 1 seater sofa overall dimension - 850mm W x 640-680mm D x 700-740mm H, Seating Height 425mm Nos. 8 24,396.15 1,95,169.17
Manufacturing, providing and Placing Center & Corner table -
Providing and fixing tables of Centre table Size - 1100mm W x 500mm D x 365mm H for whose top & Base are made of
Particle board wood Grade E-1(Environmental Friendly), thickness 19mm cover with Melamine, Edge banding (PVC)
2mm.E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for
better in-house quality. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years
Providing and fixing tables of Side table Size - 450mm W x 450mm D x 365mm H for whose top & Base are made of Particle
board wood Grade E-1(Environmental Friendly), thickness 19mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade
laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house
quality. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
Providing and fixing tables of Centre table Size - 1200mm W x 600mm D x 400mm H, for whose top is made of Particle
board wood Grade E-1(Environmental Friendly), thickness 25 mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade
laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house
22.0 quality. This should comply with (EN 120-1992).The understructure is made of SS. .Product should be BIFMA gold rated Nos. 12 14,802.16 1,77,625.87
SCSglobal certified for inhouse air quality and with 05 years warranty.
Providing and fixing tables of Side table Size - 500mm W x 500mm D x 365mm H, for whose top is made of Particle board
wood Grade E-1(Environmental Friendly), thickness 25mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade
laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house
23.0 quality. This should comply with (EN 120-1992).The understructure is made of SS. Product should be BIFMA gold rated Nos. 28 12,061.02 3,37,708.45
SCSglobal certified for inhouse air quality and with 05 years warranty.
24.0 Manufacturing, providing and placing in position machine made factory assembled Cafeteria Table -
Signature Bidder Page 32 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
Providing and placing Cafe Rectangular Table of Size - 1800mm W x 800mm D x 740mm H Worktop shall be made out of
25mm thick E-1 grade (Environmental Friendly) particle board cover with laminate and all the edges of worktop shall be
provided with machine pressed 1.5-2 mm thick ABS edge banding glued with hot melt EVA glue. E1 grade laminate with
zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house air quality. This
should comply with (EN 120-1992).The understructure is made of 2mm thick Steel square pipe dimension 38 x 38 mm with Nos. 6 32,893.68 1,97,362.08
Epoxy powder coated spray paint, baked at temperature 200 C° coated of 70-80 micron thickness. Powder coating should
be scratch resistance (cross hatch test 6x6 grid method). Product should be BIFMA gold rated SCSglobal certified for
inhouse air quality and with 5 years warranty.
25.0 Manufacturing, providing and placing in position machine made factory assembled Cafeteria Chair -
Providing and fixing Cafe chair of Size - 400mm (W) x 500mm (D) x 830mm (H) 450SH. Seat / Backrest: Polypropylene
plastic (PP) injection in a specific design. The seat and back are made up injection molded high impact strength
polypropylene polymer (PP) compound with indoor grade UV Resistance. Base: Wooden finish. Product should be BIFMA
gold rated SCSglobal certified for inhouse air quality. Leveller are made of high impact strength polypropylene polymer Nos. 72 9,936.63 7,15,437.54
compound with indoor grad UV Resistance and pressed fitted with tubular frame.Product should be BIFMA gold rated
SCSglobal certified for inhouse air quality and with 05 years warranty.
26.0 Manufacturing, providing and placing Reception Table -
Providing & Placing Rect shape Reception Counter of size: 3000W1 x 750D1 x 1050/740Hmm. Reception desk Top & Legs
are made up of 38mm thick E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-
perforated method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of worktop
shall be secured with 2mm thick PVC edge banding tape of approved colour. The top shall be made of 38mm thick pre
laminated particle board with PVC edges. Front hanging panel is madeout of 18mm thick Decorative E1 Gedae board . The
product should be from approved make, Complete as per specification mentioned above & image under the guidance and
aprroval of project architect/consultant & engineer in charge. Drawer Unit : 3 drawer Melamine(1D+1D+1F ) pedestal of
overall dimensions internal and external dimensions 420 mm (W) x 450 mm (D) x 600 mm ( H). Drawer body should be
made of E1 grade 1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated
method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of worktop shall be
secured with 2mm thick PVC edge banding tape of approved colour.Product should be BIFMA gold rated SCSglobal certified
for inhouse air quality and with 05 years warranty.
27.0 Manufacturing, providing and placing in position machine made factory assembled Single Bed -
Signature Bidder Page 33 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
Providing and fixing of Single Bed of Size 1830(W)X950(L)X750(H) with Head Board and foot board. Head Board & Foot
Board made up of 18 mm thick MDF with 0.4 mm membrane foil . Head board size: 900x600 mm and foot board of size:
900x300 mm Support structure of Bed made up of M.S. Pipe 75x25x1mm thick and 40x40x1.2mm thick duly powder
coated through seven tank process of Powder Coating.Side Panel: - The side panels are made up of 18mm thick MDF Board
with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. Bed Base: - The Bed
Base shall be made up of 12mm thick MDF Board with both side White laminate. All Exposed edges of MDF to be sealed
with 2mm thick PVC edge band and 0.8mm thick PVC edge-band to be applied on Non-exposed edges with the help of hot- Nos. 2 28,781.97 57,563.94
melt glue through fit edge-banding machines. The Edge-banding of exposed area to be done in the way that there should
not be any sharp edge or corner left after processing. All the exposed edges should have buffing radius of 1.5 to 2mm
without affecting aesthetic value of the panel. Product should be BIFMA certified for inhouse air quality and with 5 years
28.0 Manufacturing, providing and placing in position machine made factory assembled Bed Side Table -
Providing and fixing of Bed Side table with Overall Size : Depth - 450.0 mm, Width -440.0 mm, Height - 510.0 mm Material :
Body and drawer panels of Bed side table are made of 18 mm thick Prelaminated MDF Board. All the exposed edges are
edge banded with 0.8 mm thick PVC edge banding. Side panels are made of 18 mm thick Prelaminated MDF board with
imported H.D.F. foil wrapped decorative trim fixed on to it. Hardware : The high quality hardware used like Roller slides, Nos. 2 9,868.10 19,736.21
Hinges , minifix, dowels. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 5 years
29.0 Manufacturing, providing and Placing CoffeeChair for Guest room -
Providing and placing of Single Seater Chair :The seat should be made of PU foam with Density 32 ± 2 kg/cu.mtr having an
additional top layer of J PU foam with Density 28 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK
FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam
of density 23±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick
hot pressed plywood.Spring assembly should be mounted in understruCture for support and additional cushioning purpose Nos. 11 26,383.47 2,90,218.20
.t should be a welded assembly made in Stainless steel (grade SS 202) tube & plate. .Product should be BIFMA gold rated
SCSglobal certified for inhouse air quality and with 5 years warranty.
30.0 Manufacturing, providing and Placing Round Coffee Table for Guest room -
Providing and placing of coffee table 500mmDia x 450mmH) with top made 25mm thk. Pre-Lamibated MDF Board and
understructure is made of 18mm thick prelaminated MDF board with all exposed edges sealed with 2mm PVC edge
banding tape and unexposed edges sealed with 0.6mm PVC edge banding tape pressed at 200o C with hot melt glue on
special machines. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 5 years
31 Manufacturing, providing and placing in position machine made factory assembled Seminar Hall Chair
Signature Bidder Page 34 of 90 Digitally signed by SANGRAM
S.No Description of Items Unit TOTAL Rate Amount Indicative Images
Providing and fixing in position of Auditorium Chairs With Writable tablet of overall dimensions of 515mm (W) x 720mm
(D) x 980mm (H). Seat Height from floor should be of 440mm as per Ergonomic standards. The chairs should have following
description :The dimensions after push back shall be 515mm wide and seat and Backrest should be made with cutting and
moulded foam covered by acrylic fabric.The shell should made up of plywood cover of termite, fire resistant plywood and
should be capable of bearing minimum height of 120 kgs.Seat should be with buffering mechanism to enable soft closing of
seat when it is folded and all hole on seat shelf should be noise absorbing.Armrest of chairs should be of fixed type made
out of wood and should be provided with option of folding table to be used as writing pad.Legs of chairs should be made
with cold rolled cold annealed steel duly powder coated with 80-100 micron thickness to provide smooth and clean
surface.Seat should be foldable to enable comfortable seating, maintenance and to provide space utilization to walk
around. Seat and Back should be wrapped with Farbic of desire colour as per Engineer-Incharge with zero formaldehyde
glue. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.
Supplying and fixing in position Mobile Storage of size: 915 W x 457D x 2080Hmm wherein each body should be of
following configuration and specification consisting of One no.Fixed Single one side openable Unit & One, one end single
openable mobile unit & between the Main Fixed unit & end mobile unit having single/ double side mobile unit. The System
shall be modular & movable type(Knock Down) with 4-5 loading levels. Each Shelves loading capacity should be 42-48 kg.
Each unit shall be connected from the End back with the Dust proof arrangement with the help of Tong and Groove system
arrangement . Handle shall be made of ABS in round type with Dia of 350mm minimum with a safety lock System at the
Centre. channel of the compactor shall be U – Channels formation to carry more weight and to get more rigidity.
Mechanical arrangement shall be concealed inside the System, only handle shall be installed at the outer Sheet of the
Compactor as Shown in the Drawing. The component specification shall be as follows. channel U - Section: Section shall be
minimum 1.0mm thk. Material Thickness : Back Sheet : 0.8mm; Shelf: 0.8mm; Side Sheet: 0.8mm;Under Carriage Frame -
HR sheet 2.5mm thick. channel Post: U - Shaped Post. Wheel: Iron die casting with anti-rust coating, Loading : 950-
1000kg/Wheel There shall be central locking system with wire, handle lock, Rail lock Plate & Rail Lock assembly in the
chain box cover. The material used for the system shall be as per following standards:- Steel CRCA IS - 513 D HR 10748 All
steel component shall be given 7 tank ntirust Phosphting treatment and to shall be Powder coated and baked at 200o
centigrade with 60 -70 microns quoting thickness. All steel components shall be given a thorough antirust treatment.
Signature Bidder Page 35 of 90 Digitally signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED
NBCC OFFICE, K-TOWER, WTC,NAUROJI NAGAR
DSR-2023 NON SCHEDULED
S.NO DESCRIPTION OF ITEM
(AMOUNT) AMOUNT
A SANITARY FIXTURE 82,885.95 9,30,652.33
SOIL,WASTE, AND VENT PIPES AND
B FITTINGS - 11,72,718.05
GRAND TOTAL 27,45,789.41
GRAND TOTAL 27,45,789.41
Signature Bidder Page 36 of 90 Signature
Digitally NBCC
signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED NBCC OFFICE, K-TOWER, WTC,NAUROJI
BILL OF QUANTITY (PLUMBING ITEMS)
2023 Item DESCRIPTION OF ITEM UNIT Total QTY RATE (RS.) AMOUNT (RS.)
A SANITARY FIXTURE
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983
with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and
17.10 brackets, cutting and making good the walls wherever required :
17.10.1 Kitchen sink with drain board
Providing and fixing CP Brass 32mm size Bottle Trap of
17.22A approved quality & make and as per the direction of Engineerin- Each 18 1034.80 18626.40
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
18.49.1 15mm nominal bore Each 6 506.80 3040.80
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
18.53 approved quality conforming to IS:8931 :
18.53.1 15 mm nominal bore Each 24 574.30 13783.20
SUB TOTAL( SANITARY FIXTURES) 82885.95
Signature Bidder Page 37 of 90 Signature
Digitally NBCC
signed by SANGRAM
Non Schedule item(Sanitary Fixture)
Providing and fixing WALL Hung water closet with Half frame Consealed flushing
NS-1 cistren , flush plate, along with all accessories complete in all respectas per the Each 10 29464.99 294649.91
direction of Engineer-in-Charge.
Providing and fixing Over Counter Top Basin, Size: 465x415x145 mm, White ,
including all accessories cutting and making good the walls wherever require etc
all complete as per the direction of Engineer-in-Charge.
Wall Mounted Sensor faucet with Control Box (Battery Operated) all complete as
NS-3 per the direction of Engineer-in-Charge. Each 10 11314.98 113149.85
Wall Mounted Pillar Cock-Upper Trim with consealed pillar cock body as per
direction of the Engineer-in-charge.
Providing and fixing SS Towel Rail (Chrome) complete in all respect
Providing and fixing Tumbler Holder Wall Mounted complete in all respect
Providing and fixing SS waste coupling 32 mm dia for wash basin and sink
Providing and fixing two-way Bib cock & Health faucet with hose and bracket
NS-8 complete in all respect Each 10 5538.18 55381.84
NS-9 Providing and fixing wall mounted sink mixer complete in all respect Each 2 7096.28 14192.56
Providing and fixing Flash touch-free infrared hand dryer complete in all respect
Providing and fixing Stainless steel grating with frame for floor traps or drains of
NS-11 required pattern complete in all respect Each 25 1130.38 28259.47
fixing Providing and fixing Paper Holder (Chrome) with cover complete in all
NS-12 respect Each 10 2853.94 28539.39
Signature Bidder Page 38 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and fixing Paper Towel Dispenser - Towels with c/z Folds - Wall
NS-13 Mounted capacity: 400-600 C/Z towels material: AISI 304 stainless steel finish: Each 5 6609.22 33046.10
satin complete in all respect
SUB TOTAL (NON-SCHEDULED) 930652.33
B SOIL,WASTE, AND VENT PIPES AND FITTINGS
Providing and fixing Acoustic Multilayer Polyproplene piping system as per EN
1451-Part 1-6 with 3 layer pipe made of PP + PP-MD + PP and one layer fittings in
PP MD, push-fit type,Halogen and Cadmium free, having high impact resistance as
per DIN EN ISO 291:2008-08 , Ring stiffness SN6 6KN/m2 as per ISO 9969, offering
sound levels of 21 dBA as per EN 14366 at a flow rate of 4 l/s, water tightness as
per EN 1451-1 minimum of 0.5 bar for 15 minutes, density of pipe = 1.15gms/cm3,
elongation = 0.09mm/mn/K and E modulus 2300-3000 as per ISO 178, along with
factory fitted SBR - NR, NBR lip ring, Fire Behavior Classification according to EN
13501-1:2009 & classified D-s2-d2 (EN 13501-1), meets the requirements of EN
4102-2 with Fire Classification B2, Smoke Development Category Q1 & Drip
Formation category TR1. (With all fittings as required)
NS-14 110 mm dia Ultra Silent Pipe with One Socket L 3000 Mtr 398 2724.06 1084174.78
NS-15 50 mm dia Ultra Silent Pipe with One Socket L 3000 Mtr 16 1210.94 19375.01
Supply , installation , testing and commissioning Polypropylene (PP) 110mm x
110mm size P trap (Floor trap) of self cleaning design with Min. 50mm water seal
with and without vent arm jointing with push fit rubber ring socket fittings
complete, cutting chases / hole in floors / slabs and bringing the same in proper
NS-16 condition and shape after placing the trap in right position in case of suspended / Each 34 1018.34 34623.53
open plumbing or setting the trap in 1:2:4 CC in case of concealed plumbing , etc.
complete, as required. The trap shall be of following sizes: Temporary airtight, End
Cap to be provided to prevent dirt entry.
Signature Bidder Page 39 of 90 Signature
Digitally NBCC
signed by SANGRAM
Supply , installation , testing and commissioning Polypropylene (PP) 110x50x50
mm size ULTRA SILENT CORNER BRANCH 90 DEG after placing the trap in right
position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in
NS-17 case of concealed plumbing , etc. complete, as required. The trap shall be of Each 14 1,035.37 14495.16
following sizes: Temporary airtight End Cap to be provided to prevent dirt entry.
Supply , installation , testing and commissioning Polypropylene (PP) 110x110 mm
NS-18 size ultra silent inspection pipe Each 14 1,085.60 15198.46
Providing and fixing uPVC SCH-80 pipe with fittings complete in all respect
for waste (WB TO FT)
SUB TOTAL( SOIL, WASTE & VENT PIPES) 1172718.05
C WATER SUPPLY
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, including fixingthe pipe with clamps at 1.00
18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent
cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
18.7.2 20 mm nominal outer dia Pipes Mtr 126 335.00 42210.00
18.7.3 25 mm nominal outer dia Pipes Mtr 58 401.55 23289.90
18.7.4 32 mm nominal outer dia Pipes Mtr 33 518.75 17118.75
18.7.5 40 mm nominal outer dia Pipes Mtr 12 702.95 8435.40
Signature Bidder Page 40 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clampsat 1.00 m
18.8 spacing. This includes jointing of pipes & fittings with onestep CPVC solvent
cement and the cost of cutting chases and making good the same including testing
of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
18.8.1 15 mm nominal outer dia Pipes Mtr 21 497.80 10453.80
18.8.2 20 mm nominal outer dia Pipes Mtr 53 537.60 28492.80
18.8.3 25 mm nominal outer dia Pipes Mtr 26 627.25 16308.50
18.8.4 32 mm nominal outer dia Pipes Mtr 8 739.30 5914.40
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
18.17 (screwed end) :
18.17.1 25mm nominal bore Each 4 622.40 2489.60
18.17.1 A 20 mm nominal bore Each 8 539.95 4319.60
18.17.2 32mm nominal bore Each 2 689.60 1379.20
18.17.3 40 mm nominal bore Each 1 826.10 826.10
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
18.10 i/c cutting and making good the walls etc.:
18.10.5 40 mm dia nominal bore Mtr 22 811.90 17861.80
SUB TOTAL( WATER SUPPLY) 179099.85
Signature Bidder Page 41 of 90 Signature
Digitally NBCC
signed by SANGRAM
Providing and fixing (Water cooler & RO ) Material and Finish- Stainless Steel ,Size
L, Number of faucets-2, Cooling Capacity - 40 L/h , Storage capacity-80 L
6,Refrigerant - R-134a eco friendly (Non CFC) , USP- #High-quality stainless steel
tank and components for safe drinking water # Reliable reciprocating compressor
NS-20 for longer product life with Water inlet hosepipe and overflow pipes #Specially Each 6 60268.36 361610.17
designed float valves made of food-grade plastic #Adjustable pedestals made of
highly non-corrosive and strong material with water purifier & RO 25 ltr/hour
tank capacity 6 ltr
NS-21 Providing and fixing geyser (25 ltrs)complete in all respect Each 1 9940.27 9940.27
NS-22 Providing and fixing geyser (15 ltrs)complete in all respect Each 1 8882.79 8882.79
SUB TOTAL NON SCHEDULED ( WATER SUPPLY) 380433.22
Signature Bidder Page 42 of 90 Signature
Digitally NBCC
signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED
NBCC OFFICE, K-TOWER, WTC,NAUROJI NAGAR
Reference Images
SL No. Item Image Item Description
1.00 WALL HUNG WATER CLOSET WITH FIXING ACCESSORIES
2.00 OVER COUNTER TOP BASIN
3.00 WALL MOUNTED SENSOR FAUCET
4.00 WALL MOUNTED PILLAR COCK UPPER TRIM
5.00 2 WAY BIB TAP
6.00 HEALTH FAUCET WITH HOSE AND BRACKET
7.00 WALL MOUNTED SINK MIXER
8.00 WALL MOUNTED TOWEL RAIL
9.00 WALL MOUNTED SOAP TUMBLER HOLDER
Signature Bidder Page 43 of 90 Signature NBCC
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED NBCC OFFICE, K-TOWER, WTC,NAUROJI
ABSTRACT OF COST
S.NO. DESCRIPTION (FIRE FIGHTING) ESTIMATED COST AS PER DSR - AS PER MARKET RATE
A FIRE FIGHTING
i WTC BUILDING 3737401.68 2120294.04
SUB TOTAL 58,57,695.71
Signature Bidder Page 44 of 90 Signature
Digitally NBCC
signed by SANGRAM
RATE INCLUDING TOTAL
DSR (E&M)-2022 ITEM DESCRIPTION UNIT TOTAL QTY RATE
GST FACTOR AMOUNT (INR)
DSR (E&M )18.7 Providing,fixing, joining ,testing & commissioning in position of 'C'
class heavy duty MS pipe conforming to IS 3589/IS 1239 including
Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets
etc. and fixing the pipe on the wall/ceiling with suitable
clamp/support frame and painting with two or more coats of
synthetic enamel paint of required shade complete as required:
Supplying, fixing, testing and commissioning of butterfly valve of PN
1.6 rating with bronze/gunmetal seat duly ISI marked complete with
nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes
18.21 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb -
type sprinklers of rating 68 degree centigrade with required - -
18.21.3 Side Wall sprinklers Nos. 30.00 617.00 656.06 19,681.68
Providing & fixing flow switch in following sizes M.S. pipe including
connection etc as required.
Signature Bidder Page 45 of 90 Signature
Digitally NBCC
signed by SANGRAM
18.25 Supplying, installation, testing & commissioning of sprinkler flexible -
pipe (UL Listed) of stainless steel complete with 15 NPT on reducer
thread with maximum working pressure of 175 PSI test pressure of
875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to
sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple,
2 side brackets, center bracket, stockbar of following sizes complete
18.29 Providing, installation, testing & commissioning of adjustable rosette
plate for 15mm dia in white finish UL Listed or FM approved complete
TOTAL SCHEDULED ITEM COST - - 37,37,401.68
79 deg.C temperature rating Pendent sprinkler for kitchen
NS-1 Nos. RO 886.32
preparation area
NS-2 Removing and reinstalling of existing upright sprinkler Nos. 197.00 253.23 49,887.14
Supplying, installing, testing and commissioning of Gun metal chrome
finished Ball valves with SIGHT GLASS , fittings of screwed end type
for test connection
NS-3 50 mm dia Nos. RO 1,761.63
NS-4 25 mm dia Nos. RO 1,761.63
Supply, fixing, testing and commissioning of Glycerin filled Pressure
Gauge with accessories , suitable to existing 150mm sprinkler header. - -
NS-5 150 mm dia dial Size Nos 6.00 1,468.02 8,808.15
NS-6 100 mm dia dial Size Nos RO 1,468.02
Signature Bidder Page 46 of 90 Signature
Digitally NBCC
signed by SANGRAM
Modification (cutting, removing & rewelding) of Existing Branch pipes
as per site condition, with required accessories. (only labour charges
to be quoted supply items to be build in above line items.) - -
NS-7 25mm to 32mm nominal dia Rmt 911.00 422.06 3,84,493.94
NS-8 40mm to 50mm nominal dia Rmt 413.00 590.88 2,44,033.36
NS-9 65mm to 80mm nominal dia Rmt 388.00 928.53 3,60,267.86
NS-10 100mm to 150mm nominal dia Rmt 102.00 1,941.46 1,98,029.15
SUB TOTAL 1245519.595
PORTABLE FIRE EXTINGUISHERS
NS-11 Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new
seamless cylinder, as per IS: 7285 and CCE approval, fitted with
Discharge hose and horn and wheel type valve with initial Charge as Nos. 18.00 9,865.12 1,77,572.23
per IS: 15683:2018 specification, bearing ISI Mark & EIL approved.
NS-12 ABC Stored Pressure type Fire Extinguisher 6 Kgs. capacity bearing ISI
Mark for Fighting ABC Class of Fire. The Extinguisher will be
Manufactured Strictly as per BIS: 15683:2018 bearing ISI. mark. MAP
40% a) In built NRV
on valve to cross check internal pressure. Nos. 18.00 3,993.03 71,874.47
b) Operating temperature marking on valve.
c) Automatic safety release valve.
d) Non Returnable Valve
NS-13 Water Stored Pressure type Fire Extinguisher, 9 Litre’s capacity Fire
Extinguishers.The Extinguisher will be Manufactured Strictly as per
BIS: 15683:2018 bearing ISI. mark.
Signature Bidder Page 47 of 90 Signature
Digitally NBCC
signed by SANGRAM
NS-14 5 Kg Ceiling Mounted Fire Extinguisher Clean Agent HFC, Zero ODP,
Stored PressureType, Pressure Gauge, Gross Weight 7.7 Kg, empty
Weight 2.7 Kg, Can Height 267MM, Diameter 230MM, Discharge Time
less than 8 Secs, Auto discharge mechanism on temperature rise,
applicable on Class A,B,C and electrically started Fire, Can Nos. 15.00 32,648.86 4,89,732.93
Construction : Valve Construction : Forging & Machining, Internal
Coating of Can : Epoxy Powder coating, Sheet metal thickness : 1.60
MM For HUB & ISP Rooms
SUB TOTAL - 8,04,712.24
NS-15 A2 size color Evacuation Plans with photo luminescent printed with
Glass on SS studs (Autoglow EEP2 ) Nos. 9.00 1,097.35 9,876.13
NS-16 Fire Extinguishers photo luminescent signages-5' From AFFL-Tringle
type right sige image refer
NS-17 Manual call point signages
Providing and installing in position the following type of sign boards
made out of 3mm thick "Opaque" PVC foam board with computer
cut, PVC non-reflective self adhesive vinyl painted foam board, Nos. 22.00 506.47 11,142.31
complete with mirror fasteners. As per standards. 3M tape to be used
for signages fixing.
NS-18 Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS
INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white
back ground.The size of the board shall be 25cm x 30 cm and shall be
fixed at the height of 2 mts. from finished floor near Manual call
points. 3M tape to be used for signages fixing.
Signature Bidder Page 48 of 90 Signature
Digitally NBCC
signed by SANGRAM
Supply and fixing the signages" FIRE ORDER" it should contain the
following matter on 3mm thick "Opaque" PVC foam board of
computerized cut, PVC non-reflective self adhesive vinyl painted foam
board of 3' x 4'. 3M tape to be used for signages fixing.
A) Alert The Security At Security Room By Actuating Manual Call Point
Located At Strategic Locations.
B) Evacuate The Occupants By Using Fire Exits And Emergency Exits
Only And Assemble At Various Assembly Poits.
C) If Possible Try To Extinguish The Fire By Using Nearest / Suitable
Portable Extinguisher Or Water From Nearest Wet Riser.
D) Be Calm And Do Not Give Any Room From Panic, Walk, Do Not Run.
E) If You Encounter Serious Difficulty In Evacuation, Flat And Try To
Attract Attention Of Rescue Team.
SUB TOTAL 70,062.20
Signature Bidder Page 49 of 90 Signature
Digitally NBCC
signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED NBCC OFFICE, K-
TOWER, WTC,NAUROJI NAGAR
SUMMERY OF ELECTRICAL WORK
DSR AMOUNT (RS.) NS AMOUNT (RS.)
SUB HEAD-I:CIRCUIT CUM POINT WRING. 1,33,54,635.44 -
SUB HEAD-II - FITTINGS & FIXTURES 10,55,856.90 1,13,20,094.00
SUB HEAD-III - DISTRIBUTION BOARDS 6,98,168.10 -
SUB HEAD-IV - DISTRIBUTION BOARDS CABLE TRAYS ,
RACEWAY , JUNCTION BOX. 84,824.76 6,44,920.00
SUB HEAD-V - EARTHING 1,41,206.24 99,760.00
SUB HEAD-VI - L.T. CABLES 1,05,266.70 8,27,380.00
SUB HEAD-VII: UPS SYSTEM - 40,07,284.00
SUB HEAD-VIII:- MISC. - 4,62,150.00
AUDIO VISUAL SYSTEM CONFERENCE ROOM 50
AUDIO VISUAL SYSTEM CONFERENCE ROOM 10 /
FIRE ALARM SYSTEM (C) 72,35,455.59 1,70,712.00
NETWORKING SYSTEM(PASSIVE NETWORK &
ACTIVE NETWORK ) (D) 3,13,87,108.00
INCLUSIVE OF GST
Signature of NBCC Page 50 of 90 Signature
Digitally of Bidder
signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED NBCC OFFICE, K-TOWER, WTC,NAUROJI NAGAR
ESTIMATE OF ELECTRICAL WORKS
S.No. Description of items Unit Qty DSR-2022 DSR-2022 rate NS Unit Rate Rs DSR-2022 Amount NSI Amount (Rs)
including (Rs)
SUB HEAD-i:CIRCUIT CUM POINT WRING.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed steel conduit, with modular
1 DSR-1.3 switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable etc. as required. (Switch Control Primary Points)
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point
(without Independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single
core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC
2 insulated copper conductor single core cable etc as required. (Switch Control Secondary
MCB CONTROL LIGHT POINTS
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed steel conduit, with modular
3 switch, modular plate, suitable GI box and earthing the point with 2.5 sq.mm FRLS PVC
insulated copper conductor single core cable etc. as required. (Switch Control Primary Points)
3.1 NSI-1.1 Primary point controlled by one MCB. Point 0 3,182.00 -
Same as item above but Secondary point. i.e. Points to be looped with Primary point with 2.5 Point 0 2,830.00 -
sqmm wire and Point wiring
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core Metre 7500 334.00 355.14 26,63,566.50
cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
5 DSR 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
Supplying and fixing suitable size GI box with modular plate and Each 350 477.00 507.19 1,77,517.94
cover in front on surface or in recess, including providing and
fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular
switch, connections etc. as required.
Signature of NBCC Page 51 of 90 Digitally signed by SANGRAM
Signature of Bidder
Supply and Wiring for 250 volts single phase and neutral 2 Nos 6 amps socket outlate with Each 0 1,796.31 - -
control by 1 No switched with 2.5 sq.mm PVC insulated copper conductor 1100 volts grade
stranded flexible FRLS wires in concealed or surface mounted 25 mm dia 2mm thick PVC
conduit including providing and fixing of 6 amps 3 pin switch socket outlet of aprpoved make and
design in 2 mm thick GI box with grid plate and earthing of third pin of the socket with 2.5 Sq.
mm PVC insulated copper conductor stranded flexible FRLS wire.(maximum four no. of
switches socket shall be connected on one circuit)
Supplying and fixing suitable size GI box with modular plate and Each 150 589.00 626.28 93,942.56
cover in front on surface or in recess, including providing and
8 DSR 1.32 fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A
modular switch, connections etc. as required.
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including Each 15 87 92.51 1,387.61
connections etc. as required.
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in Each 6 727 773.02 4,638.11
recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C”
10 DSR-1.57 curve including connection, painting etc. as required. ( Gysers)
Supplying and fixing following modular switch/ socket on the
11 DSR 1.24 existing modular plate & switch box including connections but
excluding modular plate etc. as required.
11.1 DSR 1.24.6 Telephone socket outlet Nos 0 148.00 157.37 -
Supplying and fixing following size/ modules, GI box alongwith
12 DSR 1.27 modular base & cover plate for modular switches in recess etc.
Supplying and fixing following modular switch & socket on existing modular base & switch box
including connection but excluding modular plate etc. as required.
13.3 DSR 1.24.4 3 pin , 5/6 amps socket outlet Each 250 122.00 129.72 32,430.65
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for
modular switches in recess etc. as required.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
surface/recess including cutting the wall and making good the same in case of recessed
conduit as required.
Signature of NBCC Page 52 of 90 Digitally signed by SANGRAM
Signature of Bidder
Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core
15a DSR 1.17 cable in the existing surface/ recessed steel/ PVC conduit as required.
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,
16 DSR 1.18 unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
Supplying and drawing following modularbase & cover on existing on existing modular boxes etc.
16a DSR 1.28 as required
Installation ,testing , commissioning of wall bracket / celling fitting of all sizes and shaps containg Each 0 119.00 126.53 -
16a.6 DSR-1.35 uoto GLS/CFL/LED lamps per fitting complete with all accessories induling connections etc. as
Total of Sub-Head - I carried to summary sheet 1,33,54,635.44 -
17 NSI-3 SUB HEAD-II - FITTINGS & FIXTURES
Supply installation and comissioing of 25w L Shaped Surface/Suspended Downlight, linear 4ft Each 40 8,034.00 3,21,360.00
luminaire(50mm width) made of Aluminum extruded housing in white powder coated finish and
plastic moulded end caps.High transmittance PMMA opal diffuser.High efficiency long life LED
package in integral module with lumen efficacy upto 110 Lm/W and viewing angle of 120° to
ensure better uniformity.Powered by an integral isolated low THD electronic LED driver ( SMPS
based constant current supply) with output short circuit protection, surge protection. Lumen
Output of 2700 lumens.CRI >80, Color temperature 5700K, THD <10% and PF >0.90, IP20,
IK03.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply
Voltage Range:140-270 V, Frequency :50-60 HZ;, Internal Surge Protection:3 KV; Protection :
Reverse Polarity, Open & Short Circuit. DRIVER SAFETY REQUIREMENT STANDARDS :IS 15885-2-
13, TEST REPORT TO BE SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS 16108, TEST
CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED
SOURCE.or equivelent.
Signature of NBCC Page 53 of 90 Digitally signed by SANGRAM
Signature of Bidder
Supply installation and comissioing of 25w Recessed linear 4ft luminaire(50mm width) made of Each 420 8070.00 33,89,400.00
Aluminum extruded housing in white powder coated finish and plastic moulded end caps.High
transmittance PMMA opal diffuser.High efficiency long life LED package in integral module with
lumen efficacy up to 110 Lm/W and viewing angle of 120° to ensure better uniformity.Powered
by an integral isolated low THD electronic LED driver ( SMPS based constant current supply) with
output short circuit protection, surge protection. Lumen Output of 2700 lumens.CRI >80, Color
temperature 5700K, THD <10% and PF >0.90,IP20,IK03.Life class of 50,000 hrs @ L70, Operating
Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ;
Internal Surge Protection:3 KV; Protection : Reverse Polarity, Open & Short Circuit. DRIVER
SAFETY REQUIREMENT STANDARDS :IS 15885-2-13, TEST REPORT TO BE SUBMITTED; PHOTO
BIOLOGICAL SAFETY NORMS: IS 16108, TEST CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM
79 FOR LUMINAIRE LM 80 FOR LED SOURCE. or equivelent.
Supply installation and comissioing of 25w Surface/Suspended Downlight, linear 4ft Each 200 7,703.00 15,40,600.00
luminaire(50mm width) made of Aluminum extruded housing in white powder coated finish and
plastic moulded end caps.High transmittance PMMA opal diffuser.High efficiency long life LED
package in integral module with lumen efficacy upto 110 Lm/W and viewing angle of 120° to
ensure better uniformity.Powered by an integral isolated low THD electronic LED driver ( SMPS
based constant current supply) with output short circuit protection, surge protection. Lumen
Output of 2700 lumens.CRI >80, Color temperature 5700K, THD <10% and PF >0.90,IP20,IK03.Life
class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage
Range:140-270 V, Frequency :50-60 HZ; EMI/EMC Cmpliance Internal Surge Protection:3 KV;
Protection : Reverse Polarity, Open & Short Circuit. DRIVER SAFETY REQUIREMENT STANDARDS
:IS 15885-2-13, TEST REPORT TO BE SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS 16108,
TEST CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED
SOURCE. or equivelent.
Supply Installation and Comissioning of recessed mounted 15 W Round Shape Downlighter Each 470 1277.00 6,00,190.00
made up of pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish
NSI-3.4 with integral electronic low THD (<10%) LED driver.High efficiency long life LED package in
integral module with fixture lumen efficacy of >110 lm/W .Powered by an integrated driver,
SELV Output electronic LED driver (SMPS based constant current supply) with Output Short-
circuit protection, Surge protection & other reliability test. Lumen Output of 1200lumens.CRI
Supply, Installation, Testing and Commissioning of Recessed IP20 rated 2'x2' LED luminaire with Each 70 3925.00 2,74,750.00
minimum lumens output of 4000 Lumens and system efficacy not less than 120 lumens/ watt,
with 4000K/ 6000K color temperature, made of CRCA housing, powder coated with white epoxy
polyeste, Acrylic diffuser UGR<16. with operational voltage range of 140-270V, power factor>
0.95, THD< 10%, Inbuilt surge protection of 2.5kV, CRI of >80. The LEDs used have a life of 50000
burning hrs Lumen maintenance as per L70B10 with SDCM<=5, Surge: IEC 61000-4-5, IES, LM 79,
NSI-3.5 LM 80 & Type Test Certificate (TTC) certificates will be provided from in house NABL accredited
lab., CE Certified, ROHS compliant/ BIS Certification for Luminaires.or equivelent.
Signature of NBCC Page 54 of 90 Digitally signed by SANGRAM
Signature of Bidder
Supply, Installation and Comissioning of 18W, SURFACE Mounted LED Down Light,polycarbonate Each 48 2128.00 1,02,144.00
housing with pressure die cast aluminum heat sink, opal PC diffuser for uniform low glare light
and PC reflector to enhance product light output,,High efficiency long life LED package in integral
module with System lumen efficacy of >100lm/W,Powered by an integrated, SELV Output
electronics LED driver (SMPS based constant current supply) with Output Short-circuit
protection, Surge protection & other reliability test, 1500Lm, CRI>80, 5700K, THD<10%, PF>0.95,
IP20 IK03, Life class of 50,000 hrs @ L70,Operating Temperature:-10 TO +45 DEG.C; Input Supply
NSI-3.6 Voltage Range:140-270 V, Frequency :50-60 HZ,Internal Surge Protection:2.5 KV; Protection :
Reverse Polarity, Open & Short Circuit,driver safety requirement standards :is 15885-2-13, test
report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted;
certification: lm 79 for luminaire lm 80 for led source,fixture to be BIS certified. or equivelent.
Supply installation and Comissioning of Round donut shape suspended LED light, 25W Each 240 10565.00 25,35,600.00
decorative, corrosion resistant, surface-suspended luminaire. Housing in Aluminum extrusion
heat sink for effective thermal management, sturdiness and excellent corrosion resistant fitted
in white finish. High transmittance PS diffuser in opal finish for glare free uniform light
distribution. High efficiency long life SMD LED module is mounted on FR4 with lumen efficacy of
>140lm/W to enhance the lumen output. Powered by an integral isolated low THD electronic
LED driver (SMPS based constant current supply) with output short circuit protection, surge
protection. Lumen Output of 2180 lumens.CRI >80, Color temperature 4000K, THD <10% and PF
>0.90, IP20, IK03.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input
NSI-3.7 Supply Voltage Range: 140-270 V, Frequency: 50-60 HZ; Internal Surge Protection: 3 KV;
Protection: Reverse Polarity, Open & Short Circuit. DRIVER SAFETY REQUIREMENT STANDARDS:
IS 15885-2-13, TEST REPORT TO BE SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS 16108,
TEST CERTIFICATE TO BE SUBMITTED; CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED
SOURCE. Havels Cat Ref: Torus or equivelent.
Supply and installation of LED 25W decorative,direct corrosion resistant, surface/suspended/ Each 240 9097.00 21,83,280.00
Recessed luminaire.Housing in Aluminum extrusion heat sink for effective thermal management,
sturdiness and excellent corrosion resistant fitted in white finish.High transmittance PS diffuser
in opal finish for glare free uniform light distribution.High efficiency long life SMD LED module is
mounted on FR4 with lumen efficacy of >140lm/W to enhance the lumen output.Powered by an
integral isolated low THD electronic LED driver ( SMPS bsed constant current supply) with output
short circuit protection, surge protection. Lumen Output of 2180 lumens. Dia: 400mm, CRI >80,
Color temperature 4000K, THD <10% and PF >0.90, IP20, IK03. Life class of 50,000 hrs @ L70,
17.4 NSI-3.8 Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-
60 HZ; Internal Surge Protection:3 KV; Protection : Reverse Polarity, Open & Short Circuit.
DRIVER SAFETY REQUIREMENT STANDARDS :IS 15885-2-13, TEST REPORT TO BE SUBMITTED;
PHOTO BIOLOGICAL SAFETY NORMS: IS 16108, TEST CERTIFICATE TO BE SUBMITTED;
CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED SOURCE. or equivelent.
Signature of NBCC Page 55 of 90 Digitally signed by SANGRAM
Signature of Bidder
Supply installation and comissioing of 36w Linear Surface/Suspended Downlight, linear 4ft Each 10 20543.00 2,05,430.00
luminaire(50mm width) made ofAluminum housing in Black/White powder coated finish. High
transmittance special micro reflector optics with deglaring covers for extremely low UGR
(UGR<16), High efficiency long life LED package in integral module with lumen efficacy upto 90
Lm/W .Powered by an integral isolated low THD electronic LED driver ( SMPS based constant
current supply) with output short circuit protection, surge protection. Lumen Output of 2700
lumens.CRI >80, Color temperature 5700K, THD <10% and PF >0.90, IP20, IK03.Life class of
50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-
270 V, Frequency :50-60 HZ;, Internal Surge Protection:3 KV; Protection : Reverse Polarity, Open
& Short Circuit. DRIVER SAFETY REQUIREMENT STANDARDS :IS 15885-2-13, TEST REPORT TO BE
SUBMITTED; PHOTO BIOLOGICAL SAFETY NORMS: IS 16108, TEST CERTIFICATE TO BE
SUBMITTED; CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED SOURCE. or equivelent.
Supply installation and comissioing of AC Powerred PIR Motion sensor ,Opertes on input voltage Each 30 3081.00 92,430.00
of 220 -240 V A C 50 / 60 HZ . Celling mounted with maximum height of 4m and maximum
17.6 NSI-3.10 detection of 10 m dia at mounting height . Operating temperature -20 to 50 deg celsius, IP20.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan Each 10 2,730.00 2,902.81 - 29,028.09 -
with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long
down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than
0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM
(tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for
speed control and all remaining accessories including safety pin, nut bolts, washers, temperature
18 DSR 19.1 rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz,
single phase AC Supply, earthing etc. complete as required.
Supplying and fixing two module stepped type electronic fan Each 0 369.00 392.36 -
19 DSR 1.25 regulator on the existing modular plate switch box including
connections but excluding modular plate etc. as required.
Installation, testing and commissioning of ceiling fan, including Each 20 213.00 226.48 4,260.00
wiring the down rods of standard length (upto 30 cm) with 1.5
sq. mm FRLS PVC insulated, copper conductor, single core cable
etc. as required.
Supplying of Plastic Body Ornamental Exhaust Fan heavy duty 230V A.C 50 cycles, 300 mm Each 10 7,065.00 70,650.00
21 NSI-7 sweep, 1400 rpm, energy efficient, complete erected in position with all accessories. as per
specification Or required.
DSR-1.53 Supplying and drawing of UTG 4 pair CAT 6 LAN Cable in the existing surface / recessed steel /
PVC conduit as required.
22 NSI-8 Supply of heavy duty 450mm Wall Fan each 0 6,28,104.00 -
Total of Sub-Head - II carried to summary sheet 10,55,856.90 1,13,20,094.00
Signature of NBCC Page 56 of 90 Digitally signed by SANGRAM
Signature of Bidder
SUB HEAD-III - DISTRIBUTION BOARDS
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic
23 2.2 release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle
panel, making connections, etc. as required.
Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess,
24 complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator)
24.1 DSR 2.3.1 6 way, Double door Each 0 2206 2,345.64 -
24.2 DSR 2.3.2 8 way, Double door Each 0 2573.00 2,735.87 -
Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board,
415 volts, on surface/ recess complete with tinned copper busbar, neutral busbar, earth bar, din
bar, detachable gland plate, interconnections, phosphatized and powder painted including
25 DSR 2.4 earthing etc. as required. (But without MCB/ RCCB/ Isolator)
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN
MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A
tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without
MCBs and incomer) as required . (Note :Vertical type MCB TPDB is normally used where 3 phase
outlets are required.)
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker
suitable for inductive load of following poles in the existing MCB DB complete with connections,
27 DSR 2.10 testing and commissioning etc. as required.
27.2 DSR 2.10.2 Single Pole Neutral Each 0 599 636.92 -
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB
complete with connections, testing and commissioning etc. as required.
Signature of NBCC Page 57 of 90 Digitally signed by SANGRAM
Signature of Bidder
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete
with connections, testing and commissioning etc. as required.
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual
current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB
30 DSR 2.14 complete with connections, testing and commissioning etc. asrequired.
Supplying and fixing DP sheet steel enclosure on surface/ recess Each 2 1169 1,243.00 2,486.00
along with 25/32 A 240 V "C" curve DP MCB complete with
connections, testing and commissioning etc. as required.
Supplying and fixing single pole blanking plate in the existing Each 50 13.00 13.82 691.15
MCB DB complete etc. as required.
Total of Sub-Head - III carried to summary sheet 6,98,168.10 -
SUB HEAD-IV - DISTRIBUTION BOARDS CABLE TRAYS , RACEWAY , JUNCTION BOX.
Supplying and installing following size of perforated pre-painted M.S. cable trays with
perforation not more than 17.5%, in convenient sections, joined with connectors, suspended
from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as
33.1 DSR.4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness Metre. 15 543.00 577.37 8,660.58
33.2 DSR.4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre. 80 604.00 642.23 51,378.66
33.3 DSR.4.1.3 200 mm width X 50 mm depth X 1.6 mm thickness Metre. 0 689.00 732.61 -
33.4 DSR.4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre. 30 777.00 826.18 24,785.52
33.5 DSR.4.1.5 375 mm width X 50 mm depth X 2.0 mm thickness Metre. 0 1,015.00 1,079.25 -
33.6 DSR.4.1.6 450 mm width X 50 mm depth X 2.0 mm thickness Metre. 0 1,137.00 1,208.97 -
33.7 DSR.4.1.7 600 mm width X 50 mm depth X 2.0 mm thickness Metre. 0 1,366.00 1,452.47 -
Supports, bends, access boxes, tap off boxes and cross over as per site requirement. (overhead /
wall mounted recovery & junction boxes shall be 2.0 mm thick). The pregalvenised sheet shall be
as per IS 277 or BS 2989 having tensile strength of minimum 500 N/sq.m. and minimum zinc
coating of 275 GSM.
Supplying, installation, testing & commissioning of Race way made from minimum 2.0 mm thick
GI raceway, factory fabricated, with internal partition of the following sizes including providing
removable double folded cover of 2.0 mm thick , knock out holes and fixing accessories &
coupling, earthing stud for terminating 8 SWG copper earth wire complete as required
34.1 NSI 9.1 75 mm wide x38 mm deep in ceiling/floor Metre. 80 528.00 42,240.00
34.2 NSI 9.2 100 mm wide x38 mm deep in ceiling/floor Metre. 200 624.00 1,24,800.00
34.3 NSI 9.3 150 mm wide x38 mm deep in ceiling/floor Metre. 380 822.00 3,12,360.00
Signature of NBCC Page 58 of 90 Digitally signed by SANGRAM
Signature of Bidder
34.5 NSI 9.4 225 mm wide x38 mm deep in ceiling/floor Metre. 20 1115.00 22,300.00
34.6 NSI 9.5 300 mm wide x38 mm deep in ceiling/floor Metre. 20 1409.00 28,180.00
Supplying, installation, testing & commissioning of floor/ceiling recessed 2 mm thick
pregavanised sheet outlet junction box including providing cover with provision to
adjust overall height, knock outs on four sides to accept raceways of specified sizes and
35 NSI-10 cutouts to fix required outlets for following size of race ways with painted GI plate (
Colour as approved Architect/Consultant).
Total of Sub-Head - IV carried to summary sheet 84,824.76 6,44,920.00
SUB HEAD-V - EARTHING
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and Sets 2 7,472.00 7,944.98 15,889.96
providing masonary enclosure with cover plate having locking arrangement and watering
36 DSR 5.4 watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required.
Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including accesssories, and Sets 2 13838.00 14,713.95 29,427.89
providing masonary enclosure with cover plate (CI heavy duty) having locking arrangement and
watering pipe pipe of 2.7 mtr long etc. with charcoal or coke and salt) as required.
Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode, Mtr 20 708.00 752.82 15,056.33
38 DSR 5.11 including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required.
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as Mtr 30 1,162.00 1,235.55 37,066.64
39 DSR-5.14 required. 2 nos used for 50 x 5 for the Neutral earthing of euipments )
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as Mtr 140 244.00 259.45 36,322.33
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. Mtr 100 70.00 74.43 7,443.10
Supplying, fixing, testing and commissioning of following bare Copper/ GI flat including all
42 NSI-11 necessary fixing accessories and effecting connections.
42.1 NSI-11.1 50 mm x 3 mm thick Cu flat Metre 20 3,448.00 68,960.00
42.2 NSI-11.2 50 mm x 6 m thick GI flat Metre 50 616.00 30,800.00
Supply and laying medium class GI pipe under road/paved areas/wall crossing etc. including
43 NSI-12 earth excavations refilling, ramming and making good as approved.
43.1 NSI-12.1 150 mm dia GI pipe Class B Metre 0 1,600.00 -
Total of Sub-Head - V carried to summary sheet 1,41,206.24 99,760.00
Signature of NBCC Page 59 of 90 Digitally signed by SANGRAM
Signature of Bidder
SUB HEAD-VI - L.T. CABLES
Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire Armoured, overall
PVC sheathed 1.1 KV grade cables conforming to relevant IS-7098 Code and technical
44 NSI-13 specifications.
44.2 NSI-13.16 16 sq. mm 4 core (FRLS Copper armoured Cable) Mtr. 180 857.00 1,54,260.00
44.4 NSI-13.17 10 sq. mm 4 core (FRLS Copper armoured Cable) Mtr. 700 585.00 4,09,500.00
44.3 NSI-13.18 6 sq. mm 4 core (FRLS Copper armoured Cable) Mtr. 350 357.00 1,24,950.00
Supplying and making end termination with brass compression gland and aluminium lugs for
following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
45 DSR 9.1 grade
Total of Sub-Head - VI carried to summary sheet 1,05,266.70 8,27,380.00
46 NSI-14 SUB HEAD-VII: UPS SYSTEM
30 KVA UPS WITH 30 MINUTES BATTERY BACKUP
Supply ,installation ,testing & commissioing of 30 KVA Modular Online UPS in paralleling mode at
0.99 input power factor, UPS efficiency 0.93% ,hormonic THD ilessthan 3%, Remot
ealarmindication panel ,SNMP card as per specification given in the document with following
broad features.
THD(i) shall be less than 3% in the entire loading range.
UPS shall carry design output at 40 deg.
Signature of NBCC Page 60 of 90 Digitally signed by SANGRAM
Signature of Bidder
Shall have soft start and hold of for incoming supply.
Invertor capability to supply 150% load for 1 min.
Three Phase Input and Three Phase Output. (Input-340V-470V,ThreePhase, 4 wire. / Output - 380-
400-415 Volt, Three Phase, 4 Wire.)
Shall not allow deep discharge of the battery and shall not go to 10.5 volt sincase of 12 volt cells.
Battery shall be external type with rack and suitable for 30 minute backup on 100% load.
UPS shall be compatible for minimum 3 nos. unit in parallel operation.(Synchronize). Parallel
operation kit shall be supplied with UPS.
Suitable size cable from UPS to battery bank.
UPS described as above nos. 4 10,01,821.00 40,07,284.00
Total of Sub-Head - VII carried to summary sheet.
SUB HEAD-VIII:- MISC.
52 NS-20 32A, 3phase, wall mounting socket outlet, switched, interlocked, fused with mounting rail. IP65
53 NS-21 63A, 3phase, wall mounting socket outlet, switched, interlocked, fused with mounting rail. IP65
54 NS-22 32A, 1phase, wall mounting socket outlet, switched, interlocked, fused with mounting rail. IP65
55 NS-23 20A, 3phase, wall mounting socket outlet, switched, interlocked, fused with mounting rail. IP65
56 NS-24 Flame proof 20A industrial metal clad socketm IP44 Nos 0 3300 4842 -
57 NS-25 Popup box with 2nos 6A Socket with 1no 6A switch, 2LAN port, 2voice port
Total of Sub-Head - VIIi carried to summary sheet. - 4,62,150.00
Signature of NBCC Page 61 of 90 Digitally signed by SANGRAM
Signature of Bidder
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED
NBCC OFFICE, K-TOWER, WTC,NAUROJI NAGAR
Estimate for AV System
S.No. DESCRIPTION Amount(INR)
SITC of AV System in Conference Room - 50 Seater : 1
GRAND TOTAL 1,12,94,031.00
GRAND TOTAL 1,12,94,031.00
Signature Bidder Page 62 of 90 Signature NBCC
Digitally signed by SANGRAM
Audio Visual System in Main Conference Room (50 Seater)
Item Description Qty Unit Unit Rate (Rs.)
50 Seater Conference Room
1.0 Supply, Installation , Testing & Commissioning of 86'' diagonal LED Panel, UHD Resolution, wide color
gamut panel, LED backlight, Haze : 1% or better, landscape/portrait, wide array of inputs, 400 nit
brightness, Built in Speaker(10W x 2), fan-less LCD design, Control: LAN/HDMI, RS232 Control with 2 Nos. 6,28,104.00 12,56,208.00
2.0 Supply Installation Testing & Commissioning of Video Conference Systems having Dual 4K, 120-degree and
70 degree HFOV camera, Two way stereo with bass speaker, touch control, 2 No. display support, USB
device mode, Zoom rooms, Microsoft Teams, Google Meet, built in apps, Standards-based (h.323 and sip)
video, Group framing, speaker framing and people framing, add-on microphone with accessories. Microsoft 1 Nos 14,60,702.00 14,60,702.00
Teams Rooms / Zoom Rooms / Other cloud vendor licenses should be provided by the client complete etc as
required at site.
3.0 Supply Installation Testing & Commissioning of of Cable Manager, table mount modular multi-Connection
Solution with inputs for 2 HDMI/VGA active input plate, 2 LAN/USB, 2 Universal AC Power Outlet , etc.
4.0 Supply, Installation, Testing & Commissioning of 8x8 HDMI matrix switchers for computer and video signals
at resolutions up to 4K/60 with 4:4:4 color sampling. It should support HDMI 2.0 specifications, including
data rates up to 16 Gbps, HDR, HD lossless audio formats. The HDCP 2.3-compliant matrix switchers 1 Nos 6,74,987.00 6,74,987.00
incorporate HDMI input equalization and output regeneration, to ensure reliable system operation.
5.0 SITC of HDMI Transmitter over Cat 6/6A ( HDBaseT) up to 50m with Input 1 HDMI, Cat6 (HDBaseT)
Output, 2K and 4K support, HDTV Compatible, HDCP 2.2 Compliant with CEC, IR and RS-232, Compliance : 2 Nos 46,563.00 93,126.00
CE, ISO 9001, ISO 14001, OHSAS 18001, etc complete as required.
6.0 SITC of HDMI Receiver over Cat 6/6A ( HDBaseT) up to 50m with Inputs 1 Cat6 (HDBaseT), 1 HDMI Output,
2K and 4K support, HDTV Compatible, HDCP 2.2 Compliant with IR and RS-232, Compliance : CE, ISO 2 Nos 47,042.00 94,084.00
9001, ISO 14001, OHSAS 18001, etc complete as required.
7.0 Supply Installation Testing & Commissioning of Full HD Ceiling mounted PTZ Camera, Sony image sensor,
1/2.8" 2MP CMOS or better, 256 or more preset positions, 12x Zoom, Resolution:1080p or better, S/N ratio:
50 dB or better,Pan angle:+/-160 deg or more. Horizontal Viewing angle: 65deg or more.,supports PoE,
Auto Focus, VISCA / VISCAIP camera Control protocol, Triple Streaming, Output:1x HDMI / 3G-SDI, 2 Nos 3,47,871.00 6,95,742.00
Compression: H.264, RS 232/Ethernet/USB3.0 control, DC In:12V with accessories
Signature Bidder Page 63 of 90 Signature
Digitally signedNBCC
8.0 Supply, Installation, testing & Commissioning of Recording & Streaming devices that high-quality, Full HD
synchronized recording, standard RTSP streams, storage & Content management system integration,
Supports 4 HDMI Inputs and IP video sources , Video compression: H.264/AVC 4:2:0 8bit color, and 1 Nos 7,71,971.00 7,71,971.00
standard RTSP streams, 1 female RJ-45, Layout switch: Single, PIP, PBP, 3 layouts, Supports 1080p
60/30fps video recording. Built-in 1TB HDD storage
9.0 Supply, Installation,Testing & Commissioning of iPad,Apple or equivalent iOS 8; 9.7-Inch Retina Display;
2048x1536 Resolution A8X Chip with 64-bit Architecture; M8 Motion Coprocessor Wi-Fi (802.11a/b/g/n/ac); 1 Nos. 52,631.00 52,631.00
32 GB Capacity 8 MP iSight Camera; FaceTime HD Camera Up to 10 Hours of Battery Life
10.0 An integrationSoftware to integrate the Controller with an Apple Ipad or equivalent An Application to enable
any Apple mobile devices to transform into a fully functional touch panel to seamlessly communicate with
the Control processor Voice Control - Using Speech-to-Text and Text-to-Speech functionality within 1 Nos. 67,927.00 67,927.00
application, allows you to talk to your control system and have it talk to you with additional features.
11.0 SITC of Control System should be equipped with at least 8 bidirectional RS-232 serial ports, at least 8 IR
ports, at least 8 Digital I/O ports, at least 8 low voltage relays for controlling room functions, at least 1
Ethernet monitoring and control port, Rack mounting (1U), It should have minimum 1 license each included 1 Nos. 3,28,212.00 3,28,212.00
for both iOS & Android application & accessories
12.0 SITC of Wi-Fi Router with 2.4 GHz WLAN, WPS, 5 GHz WLAN, 4 LAN ports , Should have reset button &
power switch, Should be 802.11ac Wi- Fi specification, WPA/WPA2 encryption to secure your wireless traffic, 1 Nos. 19,407.00 19,407.00
13.0 Supply, Installation, Testing & Commissioning of Speaker with below Specifications:- Transducer Size : 8"
Co-axial Loudspeaker, Coaxial Driver + 1 x 1-inch compression driver, HF Power Handling : 60 Watts
Continuous Freq. Response : 54 Hz - 20 kHz Dispersion : 135°Conical Sensitivity : 90dB Max SPL : 115dB 8 Nos 20,902.00 1,67,216.00
14.0 Supply, Installation, Testing & Commissioning of Power Amplifier with below Specifications:-
digital power amplifier, class-D, RMS power : 2 X 350watt, Frequency Response : 50 Hz - 22 kHz, Signal /
Noise : > 100 dB, THD+N : < 0.3%, Crosstalk : < 80 dB, Power Supply : Switching mode, Common mode 1 Nos 2,52,684.00 2,52,684.00
rejection ratio : 70dB, Protection : DC Short circuit; Over heating; Over load; Signal limiting, built in
temperature controlled fan etc
15.0 Supply Installation Testing and Commissioning of digital signal processor with builtin Dante, minimum 4 no.
Or more Mic / line input with phantom power and AEC and 8 or more line output, at least 1 channel of USB
input and output for software Video Conferencing, Should be expandable for port expansion, if required. or 1 Nos 3,61,151.00 3,61,151.00
more, Shall have Built-in filters, feedback suppression, AGC etc complete as required as per specifications.
16.0 Supply of Chairman Conference Unit, Output frequency response 50-16000Hz, Earphone load >16 Ω,
Earphone volume 10 mV, Earphone output φ 3.5mm stereo jack, Max. power consumption 1.65W,
Connection Cat 5 or 7P-DIN dedicated cable with buckle, Inbuilt Speaker can be muted. 1 Nos 45,267.00 45,267.00
Signature Bidder Page 64 of 90 Signature
Digitally signedNBCC
17.0 Supply of Delegate Conference Unit, Output frequency response 50-16000Hz, Earphone Load >16 Ω,
Earphone volume 10 mV, Earphone Output φ 3.5mm stereo jack, Max. power consumption 1.65 W,
Connection Cat 5 or 7P-DIN dedicated cable with buckle, Inbuilt Speaker Can be muted. 43 Nos 43,657.00 18,77,251.00
18.0 Supply of Digital Conference System Controller, Supply voltage AC110Vor AC220V (default settings), Max
conference microphones 800 (60 Without Additional Power Supply), Frequency response 20-20000Hz, Signal-
to-noise ratio >80dBA, Dynamic range >85dB, Audio crosstalk >70dB, Total harmonic distortion <0.05% 1 Nos 2,35,598.00 2,35,598.00
Original input: 6.3 mm balanced Signal strength: 0.775 V.
19.0 Supply of Power Expansion Kit to extend 48V phantom power to more than 72 chairman (BCS 1C) /
delegate (BCS1D) units. 1 Nos 95,240.00 95,240.00
20.0 Supply, laying of Cables, convertor and accessories like HDMI Cables, HDMI Patch Cord, Microphone Cable,
Speaker Cable, CAT6A cable various type of connector as required 1 Nos 2,74,413.00 2,74,413.00
21.0 Supply and fixing of 24U Floor Stand (600W x 800D) UL certified rack with Multi hollow extrusion Aluminium
profile frame, Top and bottom cover with provision of either brush cable entry or cable entry holes with
rubber grommets, Front single door with Glass/ Mesh and rear double door with mesh, Static load bearing
capacity of Upto 1200KG., confirming to following standards - IEC EN 60529, IEC EN 62262, ISO
9001:2008, ISO 14001: 2015, ISO 45001: 2018, Salt spray test according to ISO 9227 (NSS test) for 250 1 Nos 5,99,680.00 5,99,680.00
Hours, Colour - Combination of RAL 7037 (For frame) & RAL 7035 (For other parts) with fine texture, Rack
including accessories like Horizontal PDU, Metal Cable manager, Hardware packet and Monitor Shelf etc.
should be from same OEM
22.0 Supply, Installation , Testing & Commissioning of 43'' diagonal LED Panel, UHD Resolution, wide color
gamut panel, LED backlight, Haze : 1% or better, landscape/portrait, wide array of inputs, 350 nit
brightness, Built in Speaker(10W x 2), fan-less LCD design, Control: LAN/HDMI, RS232 Control with 7 Nos. 81,002.00 5,67,014.00
23.0 Supply, Installation , Testing & Commissioning of 55'' diagonal LED Panel, UHD Resolution, wide color
gamut panel, LED backlight, Haze : 1% or better, landscape/portrait, wide array of inputs, 350 nit
brightness, Built in Speaker(10W x 2), fan-less LCD design, Control: LAN/HDMI, RS232 Control with 10 Nos. 1,11,000.00 11,10,000.00
Total (Conference Room - 50 Seater) 1,12,94,031.00
Signature Bidder Page 65 of 90 Signature
Digitally signedNBCC
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED
NBCC OFFICE, K-TOWER, WTC,NAUROJI NAGAR
Estimate for AV System
S.No. DESCRIPTION Amount(INR)
SITC of AV System in Conference Rooms (15 Seater/
10Seaters) : 4 SETS
GRAND TOTAL 1,46,82,884.00
GRAND TOTAL 1,46,82,884.00
Signature Bidder Page 66 of 90 Signature NBCC
Digitally signed by SANGRAM
Audio Visual System in Conference Room
Item Description Qty Unit Unit Rate (Rs.)
15 Seater Conference Room / 10 Seater Conference Room - 4 SET
1.0 Supply, Installation , Testing & Commissioning of 65'' diagonal LED Panel, UHD
Resolution, wide color gamut panel, LED backlight, Haze : 1% or better,
landscape/portrait, wide array of inputs, 400 nit brightness, Built in Speaker(10W x 2), fan- 12 Nos. 1,61,700.00 19,40,400.00
less LCD design, Control: LAN/HDMI, RS232 Control with accessories.
2.0 Supply Installation Testing & Commissioning of Video Conference Systems having 4K 110-
degree HFOV camera, Dual stereo speaker, touch control, 1 No. display support, USB
device mode, Zoom rooms, Microsoft Teams, Google Meet, built in apps, Standards-based
(h.323 and sip) video, Group framing, speaker framing and people framing with 4 Nos 7,80,665.00 31,22,660.00
accessories. Microsoft Teams Rooms / Zoom Rooms / Other cloud vendor licenses should
be provided by the client complete etc as required at site.as required.
3.0 Supply Installation Testing & Commissioning of of Cable Manager, table mount modular
multi-Connection Solution with inputs for 2 HDMI/VGA active input plate, 2 LAN/USB, 2 8 Nos 50,674.00 4,05,392.00
Universal AC Power Outlet , etc.as required.
4.0 Supply, Installation, Testing & Commissioning of 4 x 4 HDMI matrix switchers for computer
and video signals at resolutions up to Full HD. It should support HDMI 2.0 specifications,
including data rates up to 8 Gbps.The HDCP 2.3-compliant matrix switchers incorporate 4 Nos 4,25,526.00 17,02,104.00
HDMI input equalization and output regeneration, to ensure reliable system operation. as
5.0 SITC of HDMI Transmitter over Cat 6/6A ( HDBaseT) up to 50m with Input 1 HDMI, Cat6
(HDBaseT) Output, 2K and 4K support, HDTV Compatible, HDCP 2.2 Compliant with CEC,
IR and RS-232, Compliance : CE, ISO 9001, ISO 14001, OHSAS 18001, etc complete as 4 Nos 48,770.00 1,95,080.00
6.0 SITC of HDMI Receiver over Cat 6/6A ( HDBaseT) up to 50m with Inputs 1 Cat6
(HDBaseT), 1 HDMI Output, 2K and 4K support, HDTV Compatible, HDCP 2.2 Compliant
with IR and RS-232, Compliance : CE, ISO 9001, ISO 14001, OHSAS 18001, etc complete 4 Nos 49,271.00 1,97,084.00
Signature Bidder Page 67 of 90 SIgnature
Digitally NBCC
signed by SANGRAM
7.0 Supply, Installation, Testing & Commissioning of Speaker with below Specifications:-
Transducer Size : 8" Co-axial Loudspeaker, Coaxial Driver + 1 x 1-inch compression
driver, HF Power Handling : 60 Watts Continuous Freq. Response : 54 Hz - 20 kHz 16 Nos 21,893.00 3,50,288.00
Dispersion : 135°Conical Sensitivity : 90dB Max SPL : 115dB continuous.as required.
8.0 Supply, Installation, Testing & Commissioning of Power Amplifier with below Specifications:-
digital power amplifier, class-D, RMS power : 2 X 240watt, Frequency Response : 50 Hz -
22 kHz, Signal / Noise : > 100 dB, THD+N : < 0.3%, Crosstalk : < 80 dB, Power Supply :
Switching mode, Common mode rejection ratio : 70dB, Protection : DC Short circuit; Over 4 Nos 2,08,683.00 8,34,732.00
heating; Over load; Signal limiting, built in temperature controlled fan etc .as required.
9.0 Supply Installation Testing and Commissioning of digital signal processor with builtin
Dante, minimum 4 no. Or more Mic / line input with phantom power and AEC and 8 or
more line output, at least 1 channel of USB input and output for software Video
Conferencing, Should be expandable for port expansion, if required. or more, Shall have 4 Nos 3,78,269.00 15,13,076.00
Built-in filters, feedback suppression, AGC etc complete as required as per specifications.as
10.0 Supply of Chairman Conference Unit, Output frequency response 50-16000Hz, Earphone
load >16 Ω, Earphone volume 10 mV, Earphone output φ 3.5mm stereo jack, Max. power
consumption 1.65W, Connection Cat 5 or 7P-DIN dedicated cable with buckle, Inbuilt 4 Nos 47,413.00 1,89,652.00
Speaker can be muted.
11.0 Supply of Delegate Conference Unit, Output frequency response 50-16000Hz, Earphone
Load >16 Ω, Earphone volume 10 mV, Earphone Output φ 3.5mm stereo jack, Max. power
consumption 1.65 W, Connection Cat 5 or 7P-DIN dedicated cable with buckle, Inbuilt 48 Nos 45,726.00 21,94,848.00
Speaker Can be muted.as required.
16.0 Supply of Digital Conference System Controller, Supply voltage AC110Vor AC220V (default
settings), Max conference microphones 800 (60 Without Additional Power Supply),
Frequency response 20-20000Hz, Signal-to-noise ratio >80dBA, Dynamic range >85dB, 4 Nos 2,46,765.00 9,87,060.00
Audio crosstalk >70dB, Total harmonic distortion <0.05% Original input: 6.3 mm balanced
Signal strength: 0.775 V.
17.0 Supply of Power Expansion Kit to extend 48V phantom power to more than 72 chairman
(BCS 1C) / delegate (BCS1D) units.as required. 4 Nos 99,754.00 3,99,016.00
Signature Bidder Page 68 of 90 SIgnature
Digitally NBCC
signed by SANGRAM
18.0 Supply, laying of Cables, convertor and accessories like HDMI Cables, HDMI Patch Cord,
Microphone Cable, Speaker Cable, CAT6A cable various type of connector as required 4 Nos 1,14,745.00 4,58,980.00
19.0 Supply and fixing of 17U Floor Stand (600W x 600D) UL certified rack with Multi hollow
extrusion Aluminium profile frame, Top and bottom cover with provision of either brush
cable entry or cable entry holes with rubber grommets, Front single door with Glass/ Mesh
and rear double door with mesh, Static load bearing capacity of Upto 1200KG., confirming
to following standards - IEC EN 60529, IEC EN 62262, ISO 9001:2008, ISO 14001: 2015,
ISO 45001: 2018, Salt spray test according to ISO 9227 (NSS test) for 250 Hours, Colour - 4 Nos 48,128.00 1,92,512.00
Combination of RAL 7037 (For frame) & RAL 7035 (For other parts) with fine texture, Rack
including accessories like Horizontal PDU, Metal Cable manager, Hardware packet and
Monitor Shelf etc. should be from same OEM.as required.
Total (Conference Room - 15 Seater / 10 Seater) - 4 Set 1,46,82,884.00
Signature Bidder Page 69 of 90 SIgnature
Digitally NBCC
signed by SANGRAM
NBCC (INDIA) LIMITED
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED NBCC OFFICE, K-TOWER, WTC,NAUROJI
ABSTRACT OF COST ON MARKET RATE
Sl.No. DESCRIPTION DSR (AMOUNT) TOTAL
Signature Bidder Page 70 of 90 Signature
Digitally NBCC
signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED NBCC OFFICE, K-TOWER, WTC,NAUROJI NAGAR
SUB HEAD - VII: FIRE ALARM & DETECTION SYSTEM & PA SYSTEM Unit Qty DSR-2022 DSR-2022 rate including DSR Amount NS Amount(Rs.)
DSR 2022 GST Facor( @6.33%) (Rs.)
Supplying, installation, testing and commissioning of micro
processor based intelligent addressable main fire alarm panel,
central processing unit with the following loop modules and capable
of supporting not less than 240 devices (including detectors) and
minimum 120 detectors per loop and loop length up to 2 km,
network communication card, minimum 320 character graphics/ LCD
display with touch screen or other keypad and minimum 4000 events
history log in the non volatile memory (EPROM), power supply unit
17.2.1 (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance
free batteries with automatic charger. The panel shall have facility to
connect printer to printout log and facility to have seamless
integration with analog/digital voice evacuation system (which is
part of the schedule of work under SH: PA System) and shall be
complete with all accessories . The panel shall be compatible for
IBMS system with open protocol BACnet/ Modbus over IP complete
as per specifications.
Supplying, installation, testing & commissioning of central graphical
fire alarm management system to centrally monitor and operate the
fire alarm system complete as required.
Supplying, installation, testing & commissioning of repeater panel
wih 320 character/ Touch screen LCD display with inbuilt reset,
17.2.3 acknowledge and silence switches complete as required.
Supplying, installation, testing & commissioning of intelligent analog
17.2.4 addressable photothermal detector complete with mounting base
complete as required. Each 240 2,858.00 3,038.91 729338.736
Signature of Bidder Page 71 of 90 Signature of NBCC
Digitally signed by SANGRAM
Supplying, installation, testing & commissioning of response
indicator on surface/recessed MS Box having two LED, metallic cover
complete with all connections etc as required.
Supplying, installation, testing & commissioning of fault isolator
complete with base as required. Each 22 3,270.00 3,476.99 76493.802
Supplying, installation, testing & commissioning of intelligent
addressable thermal detector with rate of rise cum fixed
temperature thermistor complete with base as required.
Supplying, installation, testing & commissioning of addressable fire
17.2.10 control module complete as required.
Supplying, installation, testing & commissioning of addressable
phone control module complete as required. Each 25 3267.00 3,473.80 86845.0275
Supplying, installation, testing & commissioning of intelligent
17.2.13 addressable duct detector including suitable Photo detector
complete with base as required. Each 12 7814.00 8,308.63 99703.5144
Supplying, installation, testing & commissioning of addressable
manual call point complete as required. Each 27 3871.00 4,116.03 111132.9261
Supplying, installation, testing & commissioning of addressable horn
17.2.15 cum strobe complete as required.
Supplying, installation, testing & commissioning of fire fighter
telephone handset complete as required. Each 6 5740.00 6,103.34 36620.052
Supplying, installation, testing & commissioning of fire fighter phone
jack complete as required. Each 6 1600.00 1,701.28 10207.68
Signature of Bidder Page 72 of 90 Signature of NBCC
Digitally signed by SANGRAM
Supplying & laying of 2x1.5 sqmm fire survival armoured cable,
600/1000V rated with annealed copper conductor having glass mica
fire barrier tape covered by an extruded layer of Cross Linkable
Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding,
steel wire armouring & LSZH outer sheath complete as required.
PUBLIC ADDRESS SYSTEM
Supplying, installation, testing & commissioning of 6 zone, voice
alarm controller with USB, MP3 player (including 6 zone button
17.3.1 paging station) with seamless integration facility with main fire alarm
panel for voice evacuation complete as required.
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling
speaker complete as required. Each 40 965.00 1,026.08 41043.38
Supplying, installation, testing & commissioning of 1.5/3/6W metal
box ceiling/wall speakers complete as required. Each 40 1793.00 1,906.50 76259.876
Supply installation, Testing & Commissioning of RMS 480w Power
amplifier, battery voltage 24Vdc (max. 10% deviation) Frequency
MR-10.2 response 60Hz to 15kHz (+1/-3dB) Inputs XLR & Phone Jack, SIN
>85dB, as per detailed technical specification etc as required.
Supplying, installation, testing & commissioning of Voice command
17.3.9 keypad 6 zone, with microphone assembly complete as required.
Supplying and drawing of cable Fire Retardant PVC insulated copper
conductor cable in the existing surface / recessed steel conduit of
following pairs, cores and size including connections and
interconnections etc. as required.
17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm Metre 2900 54.00 57.42 166512.78
Signature of Bidder Page 73 of 90 Signature of NBCC
Digitally signed by SANGRAM
Supplying and fixing of following sizes of steel conduit along with
accessories in surface/recess including painting in case of surface
conduit, or cutting the wall and making good the same in case of
recessed conduit as required.
Total of Sub-Head - VII carried to summary sheet 7235455.586 170712
Signature of Bidder Page 74 of 90 Signature of NBCC
Digitally signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED NBCC OFFICE, K-TOWER, WTC,NAUROJI
NETWORKING-ESTIMATE
SL ITEM DESCRIPTION Unit Qty Rate Total
1 SITC of CAT6A UTP Cable 23 AWG complete in all respect as required. Mtr 42000 117.00 49,14,000.00
2 SITC of CAT6A UTP 24 port jack panel Loaded (Data)complete in all respect as required. Each 26 23,771.00 6,18,046.00
3 SITC of CAT6 UTP 24 port jack panel Loaded complete (Voice) in all respect as required. Each 13 20,132.00 2,61,716.00
4 SITC of CAT6A UTP Information outlet jack with dust cover for Date field side. Each 600 762.00 4,57,200.00
5 SITC of CAT6 UTPInformation outlet jack with dust cover for Voice field side. Each 300 625.00 1,87,500.00
6 SITC of CAT6A UTP single port face plate complete in all respect as required. Each 30 305.00 9,150.00
7 SITC of CAT6A UTP duplex port face plate complete in all respect as required. Each 300 320.00 96,000.00
8 SITC of CAT6A UTP Patch Cords 1 Meter Complete in all respect as required.(Data) Each 300 499.00 1,49,700.00
Signature Bidder Page 75 of 90 Signature
Digitally NBCC
signed by SANGRAM
9 SITC of CAT6A UTP Patch Cords 2 Meter Complete in all respect as required. (Data) Each 300 560.00 1,68,000.00
10 SITC of CAT6 UTP Patch Cords 2 Meter Complete in all respect as required. (Voice) Each 35 481.00 16,835.00
11 SITC of CAT6 UTP Patch Cords 1 Meter Complete in all respect as required.( Voice) Each 300 429.00 1,28,700.00
12 SITC of 6 Core OFC multimode 50 micron OM3 in all respect as required. Mtr 300 217.00 65,100.00
13 SITC of pigtail LC/SC 1 Meter OM3 Complete in all respect as required. Each 20 559.00 11,180.00
14 SITC of 24 port LIU loaded complete in all respect as required. Each 3 30,707.00 92,121.00
15 SITC of Duplex Fiber Patch Cord (3 Mtr) Each 25 5,457.00 1,36,425.00
SITC of Floor Standing Network/Server Rack - 42U / 800w / 800d, with Heavy Duty
Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom
cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’
marking. Depth support channels - 3 pairs. With a Overall Weight Carrying Capicity
16 of 500Kgs. Side Panels - 42U/800d Front MS Door Perforated honeycomb 42U/800w Each 2 79,661.00 1,59,322.00
Rear MS Door Split Perforated honeycomb 42U/800wFan 90CFM 230V AC, 4” dia
Castors with Brake (set of 4) Vertical Cable manager 80mmW 42U Shelf, Stationery
700mm N/W PDU 12Sockets 5/15Amps with MCB Mounting Hardware (Pkt. Of 20)
earthing Kit 150mmH Cable manager 1U MS with Loops complete in all respect.
Signature Bidder Page 76 of 90 Signature
Digitally NBCC
signed by SANGRAM
SITC of Floor Standing Network Rack - 24U / 600w / 800d, with Heavy duty complete all
18 SITC Of Penta scanning of UTP cabling complete in all respect as required JOB 1 5,42,552.00 5,42,552.00
SITC of OTDR TESTING FOR OFC terminations complete in all respect as required
for above work.
20 SITC 4 MP CCTV Camera complete with License Nos. 12 8,503.00 1,02,036.00
21 SITC of 16 CH NVR complete with License Nos. 1 43,433.00 43,433.00
22 SITC of 2 x 8TB HDD for CCTV CAM Nos. 1 53,851.00 53,851.00
23 SITC 55" LED Display for CCTV CAM Nos. 1 95,377.00 95,377.00
SITC of Univerge Business Communication Server Model NEC SV9100 (OR
24 Equivalent as per approved makes) Equipped with 08 Digital Extensions and 296 Nos. 1 8,51,053.00 8,51,053.00
Analogue Extensions ( IPABX) complete with License
SITC of IP Telephone Model No. NEC ITK-24CG-1P (OR Equivalent as per
25 approved makes) with 3 line LCD display and 24 Programmable Keys with BLF ( IP Nos. 8 22,744.00 1,81,952.00
Telephone) complete with License
Signature Bidder Page 77 of 90 Signature
Digitally NBCC
signed by SANGRAM
SITC of Digital Telephone Model No. NEC DTK-12D-1P (OR Equivalent as per
26 approved makes) with 3 line LCD display and 12 Programmable Keys with BLF ( IP Nos. 20 18,342.00 3,66,840.00
Telephone) complete with License
SITC of Digital Telephone Model No. NEC DTK-6D-1P (OR Equivalent as per
27 approved makes) with 3 line LCD display and 6 Programmable Keys with BLF ( IP Nos. 20 14,673.00 2,93,460.00
Telephone) complete with License
28 SITC of Analog Phones Nos 200 1,247.00 2,49,400.00
SITC of Access Points Cisco Catalyst 9115AX Series (OR Equivalent as
per approved makes) with 5 Year Warranty complete with License
SITC of Cisco Catalyst 9800-L Wireless Controller_Copper Uplink (OR Equivalent
as per approved makes) with 5 Year warranty complete with License
SITC of Catalyst 9200L 48-port PoE+, 4 x 1G, Network Essentials (OR Equivalent
as per approved makes) with 5 Year Warranty complete with License
SITC of Catalyst 9300 24-port data only, Network Essentials (OR Equivalent as
per approved makes) with 5 Year Warranty complete with License
SITC of Catalyst 9200L 24-port data, 4 x 10G ,Network Essentials (OR Equivalent
as per approved makes) with 5 Year warranty complete with License
34 SITC of 10GBASE-LR SFP Module. Nos 40 1,14,452.00 45,78,080.00
Signature Bidder Page 78 of 90 Signature
Digitally NBCC
signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS
AT PROPOSED NBCC OFFICE, K-TOWER, WTC,NAUROJI NAGAR
NAME OF WORK: HVAC SYSTEM
Scheduled Item /
S. NO. DESCRIPTION DSR 2019/2022
Item (Amount Rs.)
C. AIR DISTRIBUTION: ₹ 50,95,200 ₹ 7,34,720
D. ELECTRICAL EQUIPMENTS: ₹0 ₹ 2,45,094
GRAND TOTAL ₹ 1,19,67,435
GRAND TOTAL ₹ 1,19,67,435
Signature Bidder Page 79 of 90 Signature NBCC
Digitally signed by SANGRAM
NAME OF THE WORK : INTERIOR RENOVATION AND FURNISHING WORKS AT PROPOSED NBCC OFFICE, K-TOWER, WTC,NAUROJI NAGAR
NAME OF WORK: HVAC SYSTEM
Description Rate
Non-Schedule/ Rate including Scheduled Item
S. No. Unit Qty. Item
DSR-2022/2019 Item (Rs.) GST (Amount Rs.)
A. EQUIPMENTS:
Variable Refrigerant Volume / Flow Air-conditioning System (Heating &
Supply,Installation,Testing & Commissioning of modular type Variable
Refrigerant Flow/Variable Refrigerant Volume air cooled outdoor units
suitable for cooling and heating both, having all hermetically sealed
inverter type Scroll Compressor ,microprocessor based Controller, top
discharge type condensing unit(s), with R-410A Refrigerant,vibration
isolators,with suitable foundation etc. complete as required.The unit shall
deliver the rated capacity at 39 Deg C AHRI Conditions and work even at
53°C ambient temperature without tripping.The unit shall be suitable to work
on 400V +/- 10%, 3 Phase, 50Hz AC power supply.The compressor and
VRF should be of same make, The condensor fins should have anti
corrosive and hydrophyllic coating from factory having certification from third
party ( TUV) . The unit shall be filled with first charge of the refrigerant
and ready for use as required.
The VRF system shall have free phase technology, which shall correct
phases automatically in case of phase reversal.
Signature Bidder Page 80 of 90 Signature
Digitally signed NBCC
2 DSR(2019)-3.0 Hi Wall Units
Supply, installation, testing and commissioning of following minimum
capacity VRV/VRF High wall type Indoor unit equipped with washable
synthetic media pre-filter, fan section with low noise fan/dynamically
balanced blower, multispeed motor, coil section with DX copper coil,
electronic expansion valve, outer cabinet, cordless remote control, drain
pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50
Hz, single phase AC supply, complete as required. The unit shall have
automatic force shut down provision in case of fire on receiving signal from
BMS System. The cooling capacity of indoor unit will be at air inlet
conditions of 27 Degree C DB and 19 Degree C WB temperature.
3 INDOOR UNIT-CASSETTE TYPE
Supply, installation, testing and commissioning of following minimum
capacity and external static pressure VRF/VRV Cassette type Indoor unit
equipped with washable synthetic media pre-filter, fan section with low noise
fan/dynamically balanced blower, multispeed motor, coil section with DX
copper coil, electronic expansion valve, corded remote control, outer
cabinet, vibration isolators, drain pan, other necessary supports etc.,
suitable for operation on single phase AC supply 230 V ± 10%, 50 Hz
complete as required. The unit shall have automatic force shut down
provision in case of fire on receiveing signal from BMS System. The cooling
capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and
19 Degree C WB temperature.
Signature Bidder Page 81 of 90 Signature
Digitally signed NBCC
Supply, Installation,Testing & Commissioning of duct mounted Electric tubular
finned Heater for winter heating with thermostatic controller including power &
control wiring. Unit shall be of corrosion resistant steel frame, with control box. Unit
shall start only after air supply is active and automaticaly cutoff as AHU stop
(scope include all controllers and wiring)
Panel Details: Fabricated out of 16G CRC Sheet duly powder coated having
following controls. Panel is attached with heater battery & Internally wired with
Front Panel Controllers:
A) Fan on/off heater rocker switch.
B) Power on indication.
C) Heater on indication.
D) Manual/auto rocker switch
E) Fan run indication.
NS-1.0 F) Fan failure indication
G) Door inter lock system Connection:
H) Electric heater battery.
J) Temperature sensor via duct or room thermostat.
K) Airflow switch(normally open)
L) High temperature cut-out (an integral part of a heater battery)
High Temperature:
A high temperature cut-out is provided to protect the system and element bank
against temperatures in excess of the design conditions and wired in series to
ensure that the heater is shut down until the fault is rectified.
M) This is manually reset when the fault has been rectified
Signature Bidder Page 82 of 90 Signature
Digitally signed NBCC
Supply, installation, testing and commissioning of VARIABLE AIR VOLUME (VAV)
BOXES complete with leakage proof damper, differential pressure sensor,
,motorized GI single flap construction damper with actuator , vav box ,singel Piece
aerocross sensor ,Heavy gauge steel housing. Mechanically sealed and gasketed,
NS-2.0 leak resistant construction. Less than 2% of nominal cfm at 1.5" sp wg as
LCD touch screen type cooling & Heating thermostat with all the parameter control,
differential pressure sensor,24 Volt power supply unit for each VAV box, controller
capable of accepting analog/digital signal from thermostat and output to damper
actuator.The thermostat should have capacitive touch button with large display
wired control port should be controlled by mobile app(optional). Thermostat.
AXIAL FLOW FAN WITH PRE FILTER
Supplying, installation, testing and commissioning of Axial fans, shall have fixed / variable
pitch cast aluminum blades of aerofoil daesign. The fan casing shall be of heavy gauge
NS-2.A sheet steel construction.Fans shall be provided with pre-filters and gravity operated back
draft dampers.AMCA Certified fans.
Necessary MS rain protection cowl with weather proof paint, inlet and outlet cones, bird
protection screen,vibration isolators, back draft dampers etc. shall be provided.
The speed of the fan shall not exceed 960 rpm for fan with impeller diameter above450
mm and 1400 rpm for fan with impeller diameter 450 mm or less. However, for fans
having static pressure of 30 mm WC or above the speed of the fan shall notexceed 1440
rpm for fan with impeller diameter of above 450 mm and 2800 rpm for fan with impeller
diameter of 450 mm or less.All other accessories like supporting structure duly painted
etc. as required shall be provided.
Signature Bidder Page 83 of 90 Signature
Digitally signed NBCC
TOTAL CARRIED TO SUMMERY A 2044321 3410515
Supply, installation, testing & commissioning Refrigerant 'Y'Joint (Pair)
required for distribution of refrigerant in copper piping etc. complete as per
4 NS-3.0 specifications.as required. Each 19 6549 124431
Supply, Installation, testing and commissioning including vaccumiazation
and Nitrogen testing of following nominal sizes of soft/hard drawn copper
refrigerant piping for VRV/VRF system, complete with fittings, with suitable
adjustable ring type hanger supports, jointing/brazing including accessories.
Copper Pipe Copper Pipe insulated with Facotry Laminated 7mill glasscloth
5 DSR(2019)-5.0 on closed cell elastometric nitrile rubber tubular sleeves sections of
specified thickness as given below for Suction and Liquid lines.All
accessories as per specifications etc. as required :
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm
thick insulation
19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick
22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm
thick insulation
25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm
thick insulation
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm
thick insulation
31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm
thick insulation
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm
thick insulation
38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm
thick insulation
Signature Bidder Page 84 of 90 Signature
Digitally signed NBCC
41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm
thick insulation
Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm
copper in cable tray with refrigerant piping between indoor units and outdoor
6 NS-4 units and indoor units and wired controllers.As per selected VRV OEM Rmt 500 59 29500
Complete in all respect as required at site.
CONDENSATE DRAIN PIPING
Supply & installation, testing and commissioning of Rigid heavy class PVC
piping complete with fittings, supports as per specifications and duly
7 NS-5 insulated with 6 mm thick nitrile rubber tubular insulation with factory
laminated GC cloth.
TOTAL CARRIED TO SUMMERY B 201455 236131
C. AIR DISTRIBUTION:
Supply, installation, balancing and commissioning of factory fabricated
GSS sheet metal rectangular/round ducting 120 GSM complete with
neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,
supports etc.,as per approved drawings and specifications of following sheet
8.1 DSR(2022)-16.12.1 thickness complete as required.
Thickness 0.63 mm sheet (24 Guage)
Thickness 0.80 mm sheet (22 Guage)
Thickness 1.00 mm sheet (20 Guage)
Signature Bidder Page 85 of 90 Signature
Digitally signed NBCC
Thickness 1.25 mm sheet (18 Guage)
Note- 1. All hanging and support of ducts and ceiling suspended units
shall be with Hangers & Supports of complete with end fixing in
accordance with the approved shop drawings and as required by the
specifications.
Supply, installation, testing and commissioning of GI volume control duct
damper complete with neoprene rubber gaskets, nuts, bolts, screws
linkages, flanges etc, as per specifications.
Supplying & fixing of powder coated extruded aluminium Supply Air Grills
with aluminium volume control dampers as per specifications.
Supplying & fixing of powder coated extruded aluminium Return/Exhaust
11 DSR(2022)-16.16 Air Grills with louvers but without volume control dampers as per Sqmt 30 5910 6284 188523
specifications.
Supplying, fixing testing commissioning of supply air
diffusers(rectangular/Round/Square/Dual Direction flow) of powder coated
aluminium with aluminium volume control dampers with anti smudge ring &
removable core.
Supplying, fixing testing commissioning of Return air diffusers
(rectangular/Round/Square/Dual Direction flow) of powder coated aluminium
without volume control dampers with anti smudge ring & removable core.
Signature Bidder Page 86 of 90 Signature
Digitally signed NBCC
Supplying,Fixing,testing and commissioning of fire dampers of at least 1½
hour fire rating as per UL555/1995 tested by CBRI/AMCA,in supply air
duct/main branch and return air path as and where required of required
sizes, i/c control wiring,the damper shall be motorized and spring return so
as to close the damper in the event of power failure automatically and open
the same in case of power being restored. The spring return action shall be
inbuilt mechanism and not externally mounted. The damper shall also be
closed in the event of fire signal.Damper blades shall be airfoil shaped
(equivalent to 2.3mm thickness strength) roll formed using 0.8mm thick
single piece of galvanized sheet.Fire damper shall be equipped with a
electric limit switch to indicate open and close position of the damper
14 DSR(2022)-16.20 blades.The dampers shall meet the requirements of NFPA90A, 92A and
92B and shall be classified by AMCA Leakage Class 1 smoke damper in
accordance with UL- 555 & UL-555S certified motorized combined smoke &
fire damper of 90 mins rating.Each fire/smoke damper shall be AMCA
licensed and bear the AMCA seal for air Performance. Pressure drop shall
not exceed 7.5Pa when tested at 300m/min face velocity on 600x600mm
size damper.Actuator shall be UL listed complete as required and as per
specifications.
Control Panel with actuator & Wiring
Supplying and fixing of following thickness duly laminated aluminum foil of
mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct
after applying suitable adhesive for Nitrile rubber. The joints shall be sealed
15 DSR(2022)-16.23 with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation
complete as per specifications and as required.
19 mm thickness insulation (For Supply & Return air duct)
Signature Bidder Page 87 of 90 Signature
Digitally signed NBCC
Supply, installation, testing and commissioning of opposed blade
aluminium volume control dampers with black mat finish in supply air duct
collars (for grilles),Damper shall be with 16G GSS/Aluminium body and
blades shall be with aluminium airfoil construction. complete with neoprene
rubber gaskets,nuts, bolts, screws linkages, flanges etc. as per approved
shop drawings and specifications.
Supply, fabrication, installation and testing the flexible connections
constructed of fire resistance flexible double canvas sleeve,with resistoflex
17 NS-7 cloth as per the approved shop drawings. Sq.m 50 6163 308150
18 NS-8 Louver
Supplying, installing and testing of Fresh Air powder coated Anodized
extruded aluminium construction fresh air louvers (40 mm deep) (Fresh air
18.1 NS-8.1 louver with aluminium VCD , bird screen & rattle-free)complete as per Sq.m 10 9542 95420
Supplying, installing and testing of Exhaust Air powder coated Anodized
extruded aluminium construction fresh air louvers (40 mm deep) (Fresh air
louver without VCD , bird screen & rattle-free) complete as per specification.
Supply, installation testing and commissioning of duct acoustic insulation
Inside the Duct with Engineered Nitrile Rubber open cell foam with
18.3 NS-9.0 antimicrobial properties to be applied using manufacturer's recommended
Rubber based Adhesive in a blend of solvents.
18.4 NS-9.1 10 mm thick duct acoustic lining Sq.m 30 1029 30870
Supply, installation, testing & commissioning of thermal insulated flexible
ductStrapping the flexible duct connections with flexible duct strap ties
19 NS-10.0 following sizes duly supported at regular interval as per site requirement
etc. complete as required as per specifications.
Signature Bidder Page 88 of 90 Signature
Digitally signed NBCC
TOTAL CARRIED TO SUMMERY C 5095200 734720
D. ELECTRICAL EQUIPMENTS:
Supply, installation, testing and commissioning of Main centralized controller
/ manager digital type of latest generation for VRV/VRF system for
controlling all the indoor & outdoor units installed in building with adapters
(for connecting additional indoor units, cost for the same is deemed to be
included in this item) with On / Off, touch screen and Temparature Controls,
fan speed, scheduling, air flow direction setting, operation history etc. The
controller should be compatible with automation system (Bacnet/IP) with all
accessories. It should be complete as per manufacturing standards & as per
directions of Engineer-in-charge.
20 NS-12 Isolator Switches With Metal Enclosure
25A RCCB (300mA),4pole switch for VRV Outdoor units with sheet metal
enclosure, rain protection etc. as required to suit the site condition.
(Enclosure shall be suitable for out door installation.).Complete as required
as per site conditions.
63A RCCB (300mA),4pole switch for VRV Outdoor units with sheet metal
enclosure, rain protection etc. as required to suit the site condition.
(Enclosure shall be suitable for out door installation.).Complete as required
as per site conditions.
21 NS-13.0 Cables form Air Conditioning Panel to each of ODUs
Supply, laying & fixing of following sizes of PVC sheathed PVC/XLPE
insulated copper conductor power/ multicore control unarmoured cable of
1.1 KV grade with brass compression gland and aluminium lugs. Complete
as required as per site conditions.
22.0 NS-14.0 MV Cable
Supply, laying & fixing of following sizes of PVC sheathed PVC/XLPE
insulated Aluminium conductor/copper conductor power/ multicore control
armoured cable of 1.1 KV grade. Complete as required as per site
Signature Bidder Page 89 of 90 Signature
Digitally signed NBCC
22.1 NS-14.1 4C- 6 sq mm Aluminium Metre 110 81 8910
22.1 NS-14.2 4C- 4 sq mm Copper Metre 150 253 37950
TOTAL CARRIED TO SUMMERY D 0 245094
Signature Bidder Page 90 of 90 Signature
Digitally signed NBCC
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT.pdf
Tender Document
Special Conditions of Contract.pdf
Tender Document
Annex A Scope of Work.pdf
Tender Document
Instructions_for_online_bid_submission.pdf
Tender Document
GCC_Contracting_with_Amen_06.pdf
Tender Document
Integrity_Pact.pdf
Tender Document
List_of_Approved_Makes R1.pdf
Tender Document
Technical_Specifications_R1.pdf
Tender Document
Tender_Drawings_R1.pdf
Tender Document
Pre Bid Replies.pdf
Tender Document
BOQ_R1.pdf
Tender Document
corrigendum-2445-Corrigendum6.pdf
pdf • 0.08 MB
addendum-819a88452e10-Corrigendum6.pdf
pdf • 0.08 MB
addendum-15e29f1934ca-CorrigendumV.pdf
pdf • 0.03 MB
corrigendum-2429-Corrigendum4.pdf
pdf • 0.04 MB
corrigendum-2402-CorrigendumIII.pdf
pdf • 0.09 MB
corrigendum-2355-CorrigendumII.pdf
pdf • 0.09 MB
addendum-158d9e6f25d6-CorrigendumI.pdf
pdf • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .