Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-AOC | ₹1.1 Cr | L1 | Accepted-AOC Work awarded |
| 2 | L2₹1.1 Cr+₹25,130.45 (0.24%)Rejected-AOC DEHRADUN VICTORIA CROSS VIJETA GABAR SINGH URJA BHAWAN KANWALI ROAD DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | ₹1.1 Cr+₹25,130.45 (0.24%) | L2 | Rejected-AOC Rejected due to higher rate |
| 3 | L3₹1.1 Cr+₹1.2 L (1.15%)Rejected-AOC CC 1 BOOTH NO 8 JANTA BHAWAN ROAD SIRSA SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | ₹1.1 Cr+₹1.2 L (1.15%) | L3 | Rejected-AOC Rejected due to higher rate |
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
14 Mar 2023, 11:00 amClosed
Superintending Engieer
Electricity Distribution Circle, Rudrapur
Replacement of ACSR Conductor by LT AB Cable for Chakarpur Feeder emanating from 33/11 KV Substation, Kanjabag under Electricity Distribution Division, Khatima under the head S.I.
2023_UPCL3_55573_1
EDC(USN)92/2022-23
Open Tender
Electrical Works
Item Rate
90 days
Khatima
Pl Refer Tender Documents
3 documents required · 3 mandatory
₹11,800
SE EDC Rudrapur
₹2.2 L
20 Jul 2023
28 Feb 2023
15 Mar 2023
28 Feb 2023
14 Mar 2023
28 Feb 2023
Amount
Annexure-A (LABOUR CHARGES)
Charges of Dismantling of old ACSR conductor (LT line) including Re- rolling back its conductor, wire, clamp insulator etc. including stacking & transportation of material to the UPCL store : 3 phase 4 wire
Charges of Dismantling of old ACSR conductor (LT line) including Re- rolling back its conductor, wire, clamp insulator etc. including stacking & transportation of material to the UPCL store : 2 phase 3 wire
Charges of Dismantling of old ACSR conductor (LT line) including Re- rolling back its conductor, wire, clamp insulator etc. including stacking & transportation of material to the UPCL store : 1 phase 2 wire
Cartage of PCC Pole including loading/unloading from store centre, with stcking site in 1 km distance, approx distance 5-50 Km
Cartage of STP SP-23 Pole including loading /unloading from store centre, with stcking site in 1 km distance, approx distance 5-50 Km
Cartage of STP SP-55 Pole including loading /unloading from store centre, with stcking site in 1 km distance, approx distance 5-50 Km
Cartage of AB cable and small materials including loading /unloading from store centre, with stcking site in 1 km distance, approx distance 5-50 Km
Head load cartage of PCC Pole from road to site of work (approx distance 0 to1 km)
Head load cartage of SP-23 Pole from road to site of work (approx dis. 0 to1 km)
Head load cartage of SP-55 Pole from road to site of work (approx dis. 0 to1 km)
Head load cartage of small material from road to site of work (approx dis. 0 to1 km)
Charges of Rectified of tilled PCC Pole of site as per UPCL Specification
Charges of Laying, Stringing and Sagging of AB Cable size (3x70+1x50sqmm) (13.4 Km single ckt & 5.2 Km double ckt) including fixing of piering connector, dead end clamps in all complete work.
Charges of Erection of PCC Pole 8.5 mtr long for reducing span of LT ABC line inculding digging of pits .6x.9x1.5 Mtr and with soil & fitting of all accessories & back filling with soil & boulder earthing complete work as per RESPO specification & as per direction of Engineer in charge
Charges of Erection of STP SP-23 inculding digging of pits .6x.9x1.5 Mtr and with soil & fitting of all accessories & back filling with soil & boulder earthing complete work as per RESPO specification & as per direction of Engineer in charge
Charges of Erection of STP SP-55 11 mtr long inculding digging of pits .6x.9x1.5 Mtr and with soil & fitting of all accessories & back filling with soil & boulder earthing complete work as per RESPO specification & as per direction of Engineer in charge
Charges of Muffing of pole in size 0.45x0.60 cm radius with CC 1:3:6 block and 45 cm height from ground level including cost of required material as ballast, cement, sand etc complete in all respect as per direction of work incharge.
Charges of Erection of stay set 16x1800sqmm pit size 0.6x0.9x1.2 mtr as per specification including 7/16 SWG stay wire, binding nozzling of stay with bcking filling of pit with CC 1:4:8 in bottom to pit in size 0.60 complete work stay set will be provided by UPCL
Erection of MS earthing rod 20x2500 mm by earth, electrod, connection with support by means of earth wire 7/16sqm with nut & bolts in all complete work as per direction of Engineer in charge
Charges of Laying and fixing of insulated cable 1x25 sqmm insulated lead as per direction of Engineer in charge
Charges of Installation of SMC three phase LT Distribution box with inbuilt pannel lock, Al bus bar RYB 25x6mm Al. Busbar size. 40x6mm as per direction of Engineer in charge
Charges of Removal of perivous connections & reconnection of single phase LT consumer service connection as per direction of Engineer in charge.
Charges of Removal of perivous connections & reconnection of Three phase LT consumer service connection as per direction of Engineer in charge.
Annexure-B (SUPPLY ITEMS)
Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 70 Sqmm to 70 Sqmm TYCO/RPG/3M Make
Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 70 Sqmm to 25 Sqmm TYCO/RPG/3M Make
Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer ( Sintex/RMC make or other ISO reputed company ) with Panel Lock with key) ( As per drawing attached )
Supply of Dead End Clamps with I Hook. As per drawing and UPCL Specification.
Supply of Suspension Clamps with I Hook. As per drawing and UPCL Specification.
Supply of LT bare neutral connector PG Clamp made of Al 70 sqmm to 25 sqmm (for line to DB).
Supply of Aluminium Lugs ‘O’ type size 25 sqmm (for connection cable PVC 1x25sqmm)
Supply of MS half clamps for PCC pole made of MS flat of size 35x6 mm with suitable size bolt ,nut & washers duly painted by red oxide primer for fixing of LT distribution board without any crack, welding & burrs complete in all respects as per upcl specification.
Supply of MS half clamps for round SP-23 pole made of MS flat of size 35x6 mm with suitable size bolt ,nut & washers duly painted by red oxide primer for fixing of LT distribution board without any crack, welding & burrs complete in all respects as per upcl specification.
Supply of MS half clamps for round SP-55 pole made of MS flat of size 35x6 mm with suitable size bolt ,nut & washers duly painted by red oxide primer for fixing of LT distribution board without any crack, welding & burrs complete in all respects as per upcl specification.
Supply of MS holding clamps for PCC pole made of MS flat of size 50x6 mm with 2 nut & bolts & washer for dead end clamps assemble painted by primer duly red oxide without any crack, welding & burrs complete in all respects as per upcl specification.
Supply of MS holding clamps for SP-23 pole made of MS flat of size 50x6 mm with 2 nut & bolts & washer for dead end clamps assemble painted by primer duly red oxide without any crack, welding & burrs complete in all respects as per upcl specification.
Supply of MS holding clamps for SP-55 pole made of MS flat of size 50x6 mm with 2 nut & bolts & washer for dead end clamps assemble painted by primer duly red oxide without any crack, welding & burrs complete in all respects as per upcl specification.
Supply of MS holding clamps for PCC pole made of MS flat of size 50x6 mm with 2 nut & bolts & washer for suspention clamps assemble painted by primer duly red oxide without any crack, welding & burrs complete in all respects as per upcl specification.
Supply of MS holding clamps for SP-23 pole made of MS flat of size 50x6 mm with 2 nut & bolts & washer for suspention clamps assemble painted by primer duly red oxide without any crack, welding & burrs complete in all respects as per upcl specification.
Supply of MS holding clamps for SP-55 pole made of MS flat of size 50x6 mm with 2 nut & bolts & washer for suspention clamps assemble painted by primer duly red oxide without any crack, welding & burrs complete in all respects as per upcl specification.
Supply of Stay clamp for PCC pole made of ms flat 50x6 mm duly red oxide painted with suitable size with fitted 3 Nut & Bolts and washer without cracks & burrs for fixing of LT distribution board as per specification of UPCL.
Supply of Stay clamp for SP-23 pole made of ms flat 50x6 mm duly red oxide painted with suitable size with fitted 3 Nut & Bolts and washer without cracks & burrs for fixing of LT distribution board as per specification of UPCL.
Supply of Stay clamp for SP-55 pole made of ms flat 50x6 mm duly red oxide painted with suitable size with fitted 3 Nut & Bolts and washer without cracks & burrs for fixing of LT distribution board as per specification of UPCL.
Supply of LT PVC Cable 2x6sqmm ISI Mark
Supply of LT PVC Cable 2x10sqmm ISI Mark
Supply of cable 1x25 sqmm ISI mark (Insulated lead)
Supply of LT Ariel Bunched Cable 3×70+1×50 sqmm ISI Mark
M/S GOVERDHAN TRADERS
ASHOK KUMAR AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .