Provision of 50 M swimming pool at Dolphin Hill Visakhapatnam

Amount

NOTE : Schedule "A" Part I to Part XI are prepriced by MES. Bidders shall insert their lumpsum amount in Green coloured field under col-6 only

Lumpsum price worked out by the contractor for "Buildings & Structures", as listed in Schedule "A" Part – I on Serial Page No. 29.

Lumpsum price worked out by the contractor for " Site Clearance / Area Development / Earthwork Excavation", as listed in Schedule "A" Part – II on Serial Page No. 31.

Lumpsum price worked out by the contractor for "Road / Path / Culvert", as listed in Schedule "A" Part – III on Serial Page No. 33.

Lumpsum price worked out by the contractor for "Area Drainage", as listed in Schedule "A" Part – IV on Serial Page No. 34.

Lumpsum price worked out by the contractor for "Sewage Disposal", as listed in Schedule "A" Part – V on Serial Page No. 36.

Lumpsum price worked out by the contractor for "Compound Wall / Gate", as listed in Schedule "A" Part – VI on Serial Page No. 38.

Lumpsum price worked out by the contractor for "External Electrification", as listed in Schedule "A" Part – VII on Serial Page No. 40.

Lumpsum price worked out by the contractor for "INTERNAL WATER SUPPLY", as listed in Schedule "A" Part – VIII on Serial Page No. 41.

Lumpsum price worked out by the contractor for "INTERNAL Electrification", as listed in Schedule "A" Part – IX on Serial Page No. 42.

Lumpsum price worked out by the contractor for "RETAINING WALL", as listed in Schedule "A" Part – X on Serial Page No. 43.

Lumpsum price worked out by the contractor for "EXTERNAL WATER SUPPLY", as listed in Schedule "A" Part – XI on Serial Page No. 44.

Lumpsum price worked out by the contractor for "DG Set", as listed in Schedule "A" Part –XII, Serial Item No. 1 [To be Quoted by the Tenderer] [For detailed description of item refer Serial Page No. 45 to 47] Note: This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Column 5 signifies this fact only.

Schedule "A" Part - XIII [Miscellaneous Items]

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 3½ Core, 95 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 3½ Core, 50 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 4 Core, 16 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 2Core, 10 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground HT cable, ISI marked with aluminium stranded conductor 11000 Volt grade of size 3 Core, 185 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

Boring of hol;es under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4 Mpa working pressure complete all as specified and as directed.

Cable jointing kit for 11KV grade cable for out door termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 sq.mm complete all as specified and as directed.

Cable jointing kit for 11KV grade cable for straight through Heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 sq.mm complete all as specified and as directed.

(f) Conservator with level gauge (g) Silica gel breather (h) Temperature rise over an ambient of 50 degree centigrade maximum (j) All necessary arrangements with device for measuring the temperatures of core, winding and oil. Terminal Arrangement: [a] HT Sideand LT side: Cable termination Boxes [b] Quad furcating cable box with five compression glands for PVC Cable and One additional neutral terminal shall be brought out separately for earthing purpose on LV Side. [c] First filling of new and unused Transformer Oil [IS – 335 Marked], filtered and tested up to 40KV dielectric strength at 2.5mm air gap between testing electrodes. Certification of dielectric strength shall be submitted by the Contractor after filling the oil. [d] Apart from routine tests mentioned in these tender documents and relevant IS, pre-commissioning inspection of Transformer shall be carried out by Senior Electrical Inspector / Electrical Inspector. Fittings: [a] Externally hand operated Off load Tap chage over Switch with position indicator and locking device.

Compact type FRP coated Wall/pole mounted Street light Timer Panel with power coated mild steel enclousure of 12 Watt,415 Volt to be fixed on pole/wall with provision of bus bar ,Power Contactor 65 Amp,MCB 63 Amp TPN ,Digital Timer Switch complete fixed with mild steel clamp,nut & bolt and including all as specified and as directed.(Model IHXTS09120 of Havell's or equivallent in Indoasian/Simens).

Supply, install, testing Solar LED luminaire of 24 Watt LED with autonomy of minimum 3 days including complete solar panels, charging units, Solar Low maintainence Flooded Battery, wiring, GI Battery Box, GI pole not less than 5 mtr height, fixing clamps, etc. all as specified and as directed. complete all as specified and directed. [Make:Philips / Bajaj / Crompton Greaves / Havells ] Note: Solar Steet Light Luminair shall be MNRE approved.

LED street light Luminaire 70/72 Watts, comprising of epoxy powder coated, Pressure die cast aluminium housing enclosed with glass cover in frame, with suitable size of bracket, nut and bolts, PVC insulated three core flexible cable of suitable size and length duly connected to light fitting complete including installation and testing complete all as specified and directed.

Supply, install, test and commissioning of Power Control panel out door type, LT 415 volts 3 phase 4 wire made out of 3.15 mm thick FRP coated MS sheet steel dust and vemin proof Cubical type with front and rear operated doors with necessary hinges and cable glands consisting of chamber with tinned copper busbar of 250Amps capacity for phase and neutral with necessary tinned copper strip connections supported by epoxy insulators for incoming and outgoing duly powder coat painted including locking arrangements with CPRI test and with the following complete all as specified and as directed: Incoming- MCCB Capacity 125 Amp, 25kA, 4 pole - 01 Nos Outgoings a) MCCB Capacity 100 Amp, 25 kA 4 pole Capacity - 02 Nos (Plant Room Panel+01 Spare) b)MCCB Capacity of 63 Amp, 16 kA 4 Pole - 02 Nos (Bldg Panel+01 Spare) c)MCCB Capacity of 40 Amp, 16 kA 4 Pole - 02 Nos (Street Light +01 Spare) d) LED Indicating Lamps for ech phase with colour code Red Yellow Blue for R, Y and B Phases e) Multifunctional Intelligent Panel Meter digital type for measuring Volts, Current, Hz, pf, THD along with connected CTs Make: Schinder / L&T

Supply, install, test and commissioning of Power Control panel out door type, LT 415 volts 3 phase 4 wire made out of 3.15 mm thick FRP coated MS sheet steel dust and vemin proof Cubical type with front and rear operated doors with necessary hinges and cable glands consisting of chamber with tinned copper busbar of 250Amps capacity for phase and neutral with necessary tinned copper strip connections supported by epoxy insulators for incoming and outgoing duly powder coat painted including locking arrangements with CPRI test and with the following complete all as specified and as directed.(Main LT Panel) : Incoming- MCCB Capacity 160 Amp, 25kA, 4 pole - 01 Nos Outgoings a) MCCB Capacity 125 Amp, 25 kA 4 pole Capacity 02 Nos (01 DG Panel + 01 spare) b)MCCB Capacity of 100 Amp, 16 kA 4 Pole 01 Nos(For APFC Panel) c) LED Indicating Lamps for ech phase with colour coed Red Yellow Blue for R, Y and B Phases d) Multifunctional Intelligent Panel Meter digital type for measuring Volts, Current, Hz, pf, THD along with connected CTs Make: Schinder / L&T

Supply,install and commissioning of water cooler electric driven (single phase), 5 star rating, having approx storage capacity of 120 litre and nominal cooling capacity of 60 Litres per hour all as specified and directed. Make : VOLTAS/BLUE STAR

Voltage stabilizer of capacity 2.0 KVA for automatic operation , single phase, naturally air cooled indoor type and designed for input varaition between 170V to 250 V and output voltage stabilised at 230 V with accuracy of (+/-) 2.5% complete all as directed.

Road stud (Cateyes) globe with ABS plastic body & glass reflector elements complete all as specified.

Painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10cm wide, 2.50mm thick with thermo plastic paint, white or golden yellow colour complete all as specified.

Metal body delineators in the edge of the curves with reflective glass on both sides projecting 450mm above the dividers complete all as specified.

Supply, install ,testing and commissioning SF6 insulated compact R.M.U. extandable on both sides with rated voltage 11 KV rated current 400 A, short circuit breaking current 16 KA and making capacity 40 KA ,fully arc proof metal enclosed, free standing, floor mounting, flush fronted type consists of manually operated non draw out type SF6 filled load break switch-01 No (Incomers) and 2 Nos outgoing SF6 filled load break switches with integrated relays and related CTs as specified below, cable switch module and an interlocking mechanism with the earthing switch all as specified and directed. Degree of protection shall be per manufacturer specifications. (a) Fixed type voltage indicators and electronic short circuit indicators for simple fault indication b) Resin cast CT with ratio 75/1-1 with 15VA burden class1 for metering and class 5 P10 for protection-Set of three c) Resin cast potential transformers with ratio 11KV/1.732, 110V/1.732, 200 VA class1 with HT fuses mounted on with drawable rack d)Self powered microprocessor controlled numeric relay comprising of three over current , one earth fault protection relay with high set for both phase & earth and with fault memory, universal auxliary supply Model No.IRI1- WD of C&S make / Model No MC-61A of L&T /SIEMENS/ABB/AREVA e) Trip circuit supervision relay Model No. MRA1 of C&S make or equivalent in L&T/SIEMENS/ABB/AREVA f) Master trip relay Model No. CLR of C&S make or equivalent in L&T/SIEMENS/ABB/AREVA g) Power pack equipment , with back up for 15minutes including batteries complete suitable for operation of relays

Supply of PCC 1:2:4 type B-1 (using 20mm graded stone aggeregate) as in quions block, bed blocks for bonded stone in RR masonry complete all as specified and directed.

Crusher dust filling in foundation and sub base consolidated in layers n.exc.15cm thick complete all as specified and directed.

Design, Supply, Installation, Testing and Commissioning of water Filtration cum recycle plant for Swimming Pool of size 50.00 M x 21 M x 2.850 M(Avg.depth) plus diving pool having total water capacity 30,00,000 lits suitable for 8 hrs turn over period , flow rate -500 m3/hr complete with following: (a) Multi Grade Sand Filter- Vessel Dia -2800 mm , Vessel HOS -1875 mm, Filtration Flow Rate- 140M3 /Hr ,Dishend Thickness -8mm, Shell Thickness -6mm , Made of MS internal epoxy painted with collector arms and distributers made ms heavy duty pipe, frontal piping with 150 mm valve for filtration ,backwash & rinse process . working pressure 2.5 Kg/cm2 , desgn pressure - 3.5 kg/cm2 , Test Pressure 5.0 Kg/cm2.Filter to be supplied with main hole ,handhole , pressure gauge ,inclusive of Multi Grade sand media -total 8950 kgs with media depth 915 mm. confirm to IS-2062 suitable for 30,00,000 Liters for 08 hours turn over period complete for 140 M3/hr with flow designed. Filter media details :- Make IONEXCHANGE/DRA-TECH/M/S THERMAX/M/S ACE DYNAMICS Note(i): Treated water parameters of swimming pool shall be maintained as per HQ E-in-C technical Instruction No. T1 03/2010. Note(ii): All the consumable chemicals, materials and manning with one technician per shift and two shifts per day shall be supplied and manned by contractor for defect liability period and rates on this account deemed to be included in the unit rate.

[i] Quart Pebbles of 1" to 3/4" not less than 100 mm thick layer [ii] Quart Pebbles of 3/4" to 1/2" not less than 100 mm thick layer [iii] Quart Pebbles of 1/2" to 1/4" not less than 100 mm thick layer [iv] Quart Pebbles of 1/4" to 1/10" not less than 100 mm thick layer [v] Quart sand of assorted sizes not less than 900 mm thick layer.

[vi] Back wash arragement shall be made to facilitate the back washing system [vii] Pressure gauges -02 Nos suitable rating [viii] Air vent system with 25 mm pipe with gun metal valve [ix] Pressure relief valve ,nut and bolt and gasket for filter [x] suitable size of main hole and hand hole. (b) Hair strainer, Alum dozer, Chlorinator, Air scour unit/blower suitable for 200 Cum/hr at 0.35 Kg/cm2 pressure.

M&L for wiring with Submersible water proof electric cable, 3 runs of 2.5 sqmm, PVC insulated, Unsheathed, multistranded copper conductor cable, 1100 Volts, FRLS Grade, ISI marked, drawing through and including heavy duty PVC conduit of suitable size with all accessories concealed for pool light system complete all as specified including with all fittings, Junction box all as specified and directed.

Alum Dosing plant including electronic dosing pumps with fittings etc. complete, 200 ltr Sintex tank and stirrer.Electrical : 230 V.A.C. 50 HZ Suction/Discharge Tubing : 4/6mm Material Of Construction. Pump Head : Glass filed PP Diaphragm TeflonConnectors : Glass filled PolypropleneSuction tubing : HDPE Discharge tubing : HDPE Flow :17lph which will be injected into pump delivery header complete all as specified and directed. MAKE - IONEXCHANGE/Milton Roy/E-dose

Soda ash dosing plant including electronic dosing pumps, with fittings etc. complete,200 ltr Sintex tank and stirrer. Electrical : 230 V.A.C. 50 HZ Suction/Discharge Tubing : 4/6mm Pump Head : Glass filed PP Diaphragm : TeflonConnectors : Glass filled PP Suction tubing : HDPE Discharge tubing : HDPE Flow 17lph,which will be injected into pump delivery header Including materials and labour charges complete all as specified and directed. MAKE - IONEXCHANGE/Milton Roy/E-dose

Supply only Test set P.H. Test Set, Chlorine Test set Swimming pool complete all as specified and directed.

Trolley mounted Suction Sweeper with Pump of following: (i) Trolley mounted self priming suction pump of 5 HP capacity with rope and starter. Make :Kirlosker (ii) Semi type Pool cleaner with trolley (iii) Automatic vacuum head in stainless steel material size 600mm X 900mm each fitted with nylon brush 0.9 mtr long telescopic type handle suitable size as per suction sweeper suction / delivery and Vacuum hose pipe PVC branded transparent flexible pipe of 30 mtr length and 4.0 core flexible cable with industrial plug along with deep bag net and curved brushes and other maintenance acessories like handle wih 06 Nos float valves complete and including PP rope & vacuum point with ABS material-10 Nos and Piping with 50mm grade ISI mark - 01 Nos Make : Ion Exchange/Thermex

(iv) Vacuum head 60mm size - 02 Nos (v) 100 feet length of Vacuum hose with cuffs and sun light resistance complete - 02 Nos Make: Ion Exchange/Thermex complete all as specified and directed.

S.S. Main 650 MM X650 MM as Main Drain Arrangement square frame size drain with nut bolts, PVC drain piping from deepest end of pool to the suction of pump with valves complete all as specified and directed. MAKE - IONEXCHANGE/Dra-Tech

Provision of Pool Piping inside pool floor for fixing inlet nozzles Circulating piping , UPVC piping of pressure rating 10 kg/cm2 of various sizes i.e 350mm, 315mm, 300mm, 250mm, 180mm, 160mm, 50mm, 40mm as shown in ADG pune drg No. ADG/2018/EM/015 sheet No. 4/4 from filter to shallow end of pool. Water distribution piping network shall consisting of [a] From Balancing tank to pump [b] From pump to filtration system [c] From Filtration plant to swimming pool and with necessary NRV/Butterfly valves of various sizes and accessories [d] From Swimming pool to balancing tank and System shall also include 93 Nos as shown in ADG pune drg No. ADG/2018/EM/015 sheet No. 4/4 UPVC inlet nozzles inside the pool complete all as specified and directed. MAKE - SUPREME/ PRINCE

Panel for dosing system , filtration pump under water lights & plant room lighting , cabling work for motors & under water lights including Starter for pumps complete all as specified and directed. MAKE - IONEXCHANGE/Trilogics

Ladder Overflow model stainless steel AISI-316 ladder, width 500mm handrails dia 43mm stainless steel non slip steps-3 & 4 and anchoring fixtures complete all as specified and directed. MAKE - IONEXCHANGE/Thermax

Life Buoy with SS Supports of size 400mm dia in orange hard plastic with rope and life buoys support complete all as specified and directed.MAKE - IONEXCHANGE/Thermax

Life buoy holder made from aluminium, complies with EN 12145 for attaching to wall or rail including cuffs for attaching to rails complete all as specified and directed. MAKE - IONEXCHANGE/Thermax

Life guard loop made of Aluminium T which can be connected the telescopic handle complete all as specified and directed. MAKE - IONEXCHANGE/Dra-tech India

SS Hand Rail SS 304 Grab rail 40mm dia duly buffed and mirror polished alongwith supports complete all as specified and directed. MAKE - IONEXCHANGE/Dra-tech India

Extensible handle 13 M for attachment to the life guard loops in anodized aluminium complete all as specified and directed. MAKE - IONEXCHANGE/Dra-tech India

Solid make SS 304 stainless steel/ Aluminium concealed type LED under water pool lights 18 LED, 30/36watts, IP-68 water proof round with front self mounded flange, LED lens with 1m cable & gland IP-68 nickel coated, light fitting size 150X150mm including water proofing jointing connection and testing complete all as specified and directed of make SOLID STATE LIGHTS.

300 mm wide ABS -Grating for overflow channel complete all as specified and directed. MAKE IONEXCHANGE

Floor inlet Pool Jets of 100 mm X 35mm size horizontal type, flow design and flow rate of 5000 LPM adjustable type with end connection of 50 mm BSP for unifomity spreading of water and chemical along with the pool floor complete all as specified and directed. MAKE - IONEXCHANGE/Dra-tech India

Construction of Valve Chamber of size 750 X 750 X 750 mm , with PCC 1:4:8, Type D2, using 40mm graded aggregate for foundation, 200 mm thick Brickwork with old size Fly Ash Bricks in Cement Mortar 1:6, 40 mm thick PCC, 1:2:4, Type B1, using 20mm graded aggregate Coping, rendering in CM 1:4, 15 mm thick including provision of Mild Steel Sheet Cover 3 mm thick with 40 X 40 X 6 mm size Angle Iron frame work embedded in concrete with suitable hinges and locking arrangements including two coat of synthetic enamel black paint over a coat of red oxide zinc chrome primer to steel surfaces and including necessary earth work excavation in any type of soil etc., removal of surplus soil off the premises complete all as specified.

Algee brush 10 inch long with SS bristle complete all as specified and directed.. Make : Ion Exchange

Algee cruved brush 18 inch long with Nylon brush complete all as specified and directed. Make : Ion Exchange

Telescopic pole 4.8 Mtr long with extendable upto 9 mtr made of aluminum tubing complete complete all as specified and directed. Make : ion Exchange

Modular switch socket combination 6 Amps 2/3 pin combined, 240Volts, 3 Module complete all as specified.

Leaf rack made of aluminum MOC complete all as directed.Make: Ion Exchange

Sprinkler for spreading water 15mm dia complete all as specified.

Supply only calcium based granual chlorination chemical for water treatment plant in packing of 45/50 Kg HDPE bags Make: Altoch

Circulating pumpsets 140 M3/HR pump set , 25 mtr. Head (3W+1 SB) casing : CI Motor Details : Type;squirrel cage Enclosure : TEFC speed in RPM : 1450 Rated Voltage/frequency 415 V+/-10 The work comprising of suction piping, valves, suction & delivery piping, delivery vales and NRV etc as per specification- MAKE - KIRLOSKAR/CG/KSB

LED driver unit for under water light 18 LED, 30/36watts with 10KVA spike gaurd, over voltage protection, IP 66/67, Input voltage 190-265 VAC, ISI marked with taping for different cable lengths including all necessary connections as required at site complete all as specified of make SOLID STATE LIGHTS/FORTUNE ARRT/HAVELLS.

Poly carbonatedust and vermin proof, IP-64 protection Box of suitable size but not less than 1.0X1.2m to install low voltage transformer for under water LED lights including all necessary connections as required at site complete all as specified.

Supply and fix junction box size of 100 mm X 100 mm square type with water proof covering made of ABS plastic material complete all as specified and directed. Make: Ion Exchange

Cutting the existing 250mm dia CI pipe line and inserting Tee 250x250x100 mm dia with collars and required specials for tapingincluding necessary earth work excavation complete all as specified

Ductile Iron Pressure Pipe, 150 mm bore, Centrifugally Cast [Spun], Class "K-9" with Socket and Spigot ends conforming to IS - 8329 in standard lengths suitable for Push-On Rubber Gasket Jointing with inside Cement Mortar Lining and Black Bitumen external coating complete all as specified and as directed.

Ductile Iron Pressure Pipe, 100 mm bore, Centrifugally Cast [Spun], Class "K-9" with Socket and Spigot ends conforming to IS - 8329 in standard lengths suitable for Push-On Rubber Gasket Jointing with inside Cement Mortar Lining and Black Bitumen external coating complete all as specified and as directed.

Ductile iron fittings such as Bends, Tapers, Tee pieces, single & double branch any type and angle/radius and straight connecting pieces upto 300mm dia complete all as specified and as directed.

Valve, reflux, with by-pass arrangement of size 100mm dia complete all as specified.

Valve, reflux, with by-pass arrangement of size 150mm dia complete all as specified.

Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part - I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified.

Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 32X6 mm GI earth strip[Earth Lead] and GI pipe 40 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part - I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified.

ARBORICULTURE : Best quality Bermuda carpet grass by dibbling process covering 600X600mm to this area for dibbling and covering with red earth organic manure, vermi compost, polydol dust, neem cake and organic manure [Cow dung] complete all as directed by Engineer-in-Charge. Note:- [i] Supply only red soil with manure & vermi compost [As per the area of grass ] shall be measured and paid seperately. However, labour element for filling and watering shall be included in the rate quoted. [ii] Rate quoted shall include for two years maintenance from the certified date of completion including necessary watering and necessary compost/Manure required for fertilisation and healthy growth of grass during maintenance period.

Supply and planting of Ashoka plant including preparation of ground upto 30 cm deep and filling soft soil, Cow dung and watering etc complete all as directed by Engineer-in-Charge. Note:- [i] Supply only red soil with manure & vermi compost [As per the area of pit ] shall be measured and paid seperately. However, labour element for filling and watering shall be included in the rate quoted. [ii] Rate quoted shall include for two years maintenance from the certified date of completion including necessary watering and necessary compost/Manure required for fertilisation and healthy growth of plant during maintenance period.

Supply and planting of Royal palm tree including preparation of ground upto 30 cm deep and filling soft soil, Cow dung and watering etc complete all as directed by Engineer-in-Charge. Note:- [i] Supply only red soil with manure & vermi compost [As per the area of pit ] shall be measured and paid seperately. However, labour element for filling and watering shall be included in the rate quoted. [ii] Rate quoted shall include for two years maintenance from the certified date of completion including necessary watering and necessary compost/Manure required for fertilisation and healthy growth of plant during maintenance period.

Supply and planting of Gulmohar [ Hybrid] plant including preparation of ground upto 30 cm deep and filling soft soil, Cow dung and watering etc complete all as directed by Engineer-in-Charge. Note:- [i] Supply only red soil with manure & vermi compost [As per the area of pit ] shall be measured and paid seperately. However, labour element for filling and watering shall be included in the rate quoted. [ii] Rate quoted shall include for two years maintenance from the certified date of completion including necessary watering and necessary compost/Manure required for fertilisation and healthy growth of plant during maintenance period.

Supply and planting of Bougan Vilea tree including preparation of ground upto 30 cm deep and filling soft soil, Cow dung and watering etc complete all as directed by Engineer-in-Charge. Note:- [i] Supply only red soil with manure & vermi compost [As per the area of pit ] shall be measured and paid seperately. However, labour element for filling and watering shall be included in the rate quoted. [ii] Rate quoted shall include for two years maintenance from the certified date of completion including necessary watering and necessary compost/Manure required for fertilisation and healthy growth of plant during maintenance period.

Supply and planting of Jamun plant including preparation of ground upto 30 cm deep and filling soft soil, Cow dung and watering etc complete all as directed by Engineer-in-Charge. Note:- [i] Supply only red soil with manure & vermi compost [As per the area of pit ] shall be measured and paid seperately. However, labour element for filling and watering shall be included in the rate quoted. [ii] Rate quoted shall include for two years maintenance from the certified date of completion including necessary watering and necessary compost/Manure required for fertilisation and healthy growth of plant during maintenance period.

Supply only approved loose manure (cow dung) complete all as directed.

Supply only approved loose soil best quality for plantation complete all as directed.

Supply only approved Vermi post compost of best quality for plantation weighing each bag of 50 KG complete all as directed.

Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and Pressed Metal Flush Box made out of 2mm thick MS Sheet of suitable size and 3 mm thick Hylam Sheet top cover for fixing switches, fittings, regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified.

All as per Serial Item No. 83 above but controlled by two two way switches complete all as specified.

All as per Serial Item No. 83 above but One 3 Pin Switch Socket Outlet 5 Amps on Independent Board complete all as specified.

All as per Serial Item No. 83 above but one 3 Pin Switch Socket Outlet 15 Amps on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.

Energy efficient LED light fitting with tube minimum 18 watt ,230V surface mounted LED batten type with extruded aluminium/CRCA housing and robust constrution with necessary acrylic cover as diffuser complete with mounting bracket etc including connecting up with twin core twisted flexible copper conductor cable with suitable size complete as per makes Havells / Philips / Surya Roshni Ltd/ Wipro /GE and as approved. Note: Light fitting shall be of PF>0.90

Energy efficient LED light fitting with tube minimum 36 watt( 2X18 WATT) SUSPENDED ARCHITECTRUL or nearest size ,230V surface mounted LED batten type with extruded aluminium/CRCA housing and robust constrution with necessary acrylic cover as diffuser complete with mounting bracket etc including connecting up with twin core twisted flexible copper conductor cable with suitable size complete as per makes Havells / Philips/ Surya Roshni Ltd/ Wipro / GE and as approved. Note: Light fitting shall be of PF>0.90

Energy efficient LED ceiling light fitting minimum 08 watt , integral round shape , 230V surface mounted with necessary diffuser complete with mounting bracket etc including connecting up with twin core twisted flexible copper conductor cable with suitable size complete as per makes: Havells/ Philips/ Surya Roshni Ltd/ Wipro/ GE and as approved. Note: Light fitting shall be of PF>0.90

Energy efficient LED light fitting with tube minimum 36 watt ,230V surface /recess mounting type including connecting up with twin core twisted flexible copper conductor cable with suitable size. (Poarch Light) complete as per Makes: Havells/ Philips/ Surya Roshni Ltd / Wipro / GE and as approved. Note: Light fitting shall be of PF>0.90

Energy efficient LED mirror light fitting with luminare minimum 10 watt , 230V surface mounted with necessary diffuser complete with mounting bracket etc including connecting up with twin core twisted flexible copper conductor cable with suitable size complete as per Makes: Havells/ Philips / Surya Roshni Ltd / Wipro / GE and as approved. Note: Light fitting shall be of PF>0.90

Energy efficent LED Security light fitting with tube minimum 20W New generation Energy saving &environmental frindly long life versatile pressure die cast aluminium luminiare with mid power LEDs as source and HF electronic driver pre wired with 1.5 Sq mm copper conductor cable upto connector including 2 Mtr long GI Tubing Med grade 32 mm dia bend to shape fixing on wall with suitable MS brackets compelte all as specified and as directred. Makes: Havells / Philips/ Surya Roshni Ltd/r Wipro/GE/Bajaj Note: Light fitting shall be of PF>0.90

Ceiling fans AC single phase 230V of size 1200mm sweep with complete set with fixtures, 5 star rating, mettallic body and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete Havells or CG or Orient or Bajaj and as approved.

Telephone jack with shutter glossy white RJ45, complete all as specified and directed.

Exhaust fan 380mm sweep, AC single phase 230Volts, 50HZ, Plastic body (Heavy duty) completewith necessary fixing arrangement, and including louver shutters as when closed in stop position connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete Havells or CG or Orient or Bajaj and as approved.

Exhaust fan 300mm sweep, AC single phase 230Volts, 50HZ, Plastic body (Heavy duty) completewith necessary fixing arrangement, and including louver shutters as when closed in stop position connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete Havells or CG or Orient or Bajaj and as approved.

MCB, TPN, 32 Amps, 10 KA, 415 Volts, 50 Hz, 'C' curve series with all incoming/outgoing connections with proper size of copper lugs complete all as specified.

MCB, SP, 6 to 32 Amps, 10 KA, AC, 230 V, 50 Hz 'B' curve series with all incoming/outgoing connections with proper size of aluminium lugs complete all as specified.

MCB, SPN, 40 Amps, 10 KA, AC, 230 V, 50 Hz 'C' curve series with all incoming/outgoing connections with proper size of copper lugs complete all as specified.

Sub main wiring with 2 runs of single core 10 Sq.mm Single Core, FRLS, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 10 Sq.mm, Single Core, FRLS PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. Note: 2 runs of 10 Sq.mm, 1 runs of 10 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit

Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, FRLS, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 6 Sq.mm, Single Core, FRLS PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. Note: 2 runs of 6 Sq.mm, 1 runs of 6 Sq.mm & one run of 20mm dia PVC Conduit will be measured as one unit

LED decorative type Post top lantern light fitting with lamp of 1X40 watt, electronic driver, enclosure complete with fixing arrangement complete all as specified.

Supply and laying un-reinforced precast concrete cable cover, class HV, type 2 with peak, size 300mmX180mmX40mm complete all as specified.

LED fllod light luminaries with high pressure die cast housing with LED lamps of 150watt with all accessories including PVC insulated three core flexible cable of suitable size and length duly connected to light fitting complete all as specified and directed.

Loop in loop out thermoplastic cable junction boxes of size 250X250X100mm with MCB SP 6 Amps and 4 porcelain terminals as bus terminals for cable with necessary fixing arrangements with cable glands etc complete all as specified and directed (for security lights). Make Hensel/Sintex

Fountain lighting luminaire 50Watts BJUWL 150 DH 12V without transformer floor mounted gun metal housing with clear toughened glass fixed in a gun metal frame with all the necessary water tight seal material complete all as specified and directed . Makes: BAJAJ/HAVELLS/CG/SURYA

Supply, install, testing and commissioning of factory made APFC panel for 3 phase, 415V & 50HZ system with MD-XL capacitor, relay and MCCB as incomer 50KVAR with 5 steps (5X10) complete all as specified and directed .

Cable joint kit for 11 KV grade cable for Indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 sqmm complete all as specified and directed .

A CHINNARAO REDDY

SVS PROJECTS

VADERAS INTERIORS AND EXTERIORS

K KUMAR RAJA PROJECTS P LIMITED

CH.VEERARAGHAVULU CONSTRUCTION PVT LTD

Indus Projects Private Limited