Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.0 LRejected-Finance | L1 | Rejected-Finance L1 |
| Sl No | Description | Qty | Unit | Muhammed Althaf P K L1 |
|---|---|---|---|---|
| 1.00civil works | ||||
| 1.00 | 2.31
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared | 200 | sqm | 16 ₹3,200 Lowest |
| 1.00 | 2.8.1
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 94.1 | cum | 206 ₹19,385.42 Lowest |
| 1.00 | 4.1.8
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 11.9 | cum | 6,827 ₹81,227.65 Lowest |
| 1.00 | 5.1.2
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) | 29.06 | cum | 9,027 ₹2,62,288.51 Lowest |
| 1.00 | 5.9.1
Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 85.44 | sqm | 332 ₹28,366.08 Lowest |
| 1.01 | 5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 2,615.04 | kilo gram | 98.5 ₹2,57,581.44 Lowest |
| 1.01 | 50.10.1
Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 2,197.67 | kg | 198 ₹4,35,138.26 Lowest |
| 1.01 | 50.10.2
Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 275.12 | kg | 161 ₹44,294.32 Lowest |
| 1.01 | 12.7.1
Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m2 | 37 | metre | 880 ₹32,560 Lowest |
Tender Value
₹49.5 L
EMD Value
₹50,000
Closing Date
17 Sept 2025, 5:00 pmClosed
CHIEF ENGINEER, KSCADC
KSCADC Building, Kamalewsaram , Manacaud P.O. Thiruvananthapuram Pin-695009
Establishment of Nile Tilapia Hatchery at Malampuzha in Palakkad District-Supply and Installation of hatchery accessories-Miscellaneous civil works(Re-Tender)
2025_SCADC_792994_2
ET-51/2025-26
Open Tender
Miscellaneous Works
Item Rate
90 days
Malampuzha in Palakkad District.
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,950
₹50,000
19 Dec 2025
10 Sept 2025
19 Sept 2025
10 Sept 2025
17 Sept 2025
10 Sept 2025
Amount
civil works
2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)
5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
50.10.1 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2 Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.7.1 Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m2
12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50.6.1.5 Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
13.48.3 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
23.1.1.1 Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level. All types of soil300 mm dia
23.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.150 mm nominal size dia
23.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer -in- charges
OD140999/2025-2026 Providing suplying and installation of Borewell Submersible Pump-1.5HP water cooling with 6mm dia ss rop including all accessories, fittings etc complete of approved IS make as per design and drawings and decision of Engineer-at-site.
50.18.7.4.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall
50.18.8.7.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2
50.18.9.20.1 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow
50.18.9.20.2 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow
50.18.9.20.4 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend
50.18.9.20.8 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia End cap
50.18.9.20.9 Providing and fixing PVC moulded fitting / accessories for Rigid PVC pipes, including jointing with PVC solvent cement-63 mm dia Socket /coupling
50.18.9.20.10 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer
OD140997/2025-2026 :Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for inauguration stone, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing complete at all levels. <br>Area of slab over 0.50 sqm
OD141001/2025-2026 supplying and fixing 63mm hose pipe
16.21 Engraving letters in hard stone
13.71 Lettering with black Japan pint of approved brand and manufacture
17.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
OD140998/2025-2026 providing and fixing 160 mm PPR pipe triple layer PN 20
OD141002/2025-2026 PROVIDING AND FIXING PPR 160 mm coupler
OD140996/2025-2026 providing and fixing ppr 160 mm elbow
OD141000/2025-2026 providing and fixing ppr end cap
supply and installation of hatchery accessories(RAS,ETP, Pump room accessories))
OD141007/2025-2026 BIOLOGICAL FILTER 25T- Supply and installation of BIOLOGICAL FILTER 25T with sediment tank of length 10feet, height 3feet, width 3feet, bio media 500kg Rectangular shape polypropylene tank, as per the instruction of Engineer - in - charge.
OD141012/2025-2026 CIRCULAR COLLETION TANK - Supply and installation of PP CIRCULAR TANK 2TON with Height 3.5 feet, width 5 feet, of wall thickness 6mm bottom thickness 12mm, as per the instruction of Engineer - in - charge.
OD141009/2025-2026 1 HP PUMP - Supply and installation of 1 HP PUMP of 220V/50Hz, Single phase, with one year of warranty as per the instruction of Engineer - in - charge.
OD141003/2025-2026 Pressure sand filter multi port valve - Supply and Installation of Pressure sand filter multi port valve, V900 Dia-"32" Top Mount Filter,2.0"valve - 24600 Litres, capacity of following features. * Fibre glass reinforced tank with UV resistant surface finish. * Internal surface of the tank is finished with water resistant resin. * Spherical tank with uniform wall thickness. * facilities for back washing. * One year of warranty.. etc And all installations are as per the instruction of Engineer - in - charge.
OD141011/2025-2026 UV sterlizer - Supply and Installation of UV sterlizer of stainless steel ,UV system 120- 240V,40W with Timer, more than one year of warranty,all installations are as per the instruction of Engineer - in - charge.
OD141017/2025-2026 Air blower - Supply and Installation of Air Blower of 1 HP, 750 watts,220V/240V, 2000 lpm with one year warranty as per the instruction of Engineer - in - charge.
OD141010/2025-2026 Pressure sand filter multi port valve - Supply and Installation of Pressure sand filter multi port valve, V900 Dia-"36" Top Mount Filter,2.0"valve - 31200 Litres, capacity of following features. * Fibre glass reinforced tank with UV resistant surface finish. * Internal surface of the tank is finished with water resistant resin. * Spherical tank with uniform wall thickness. * facilities for back washing. * one year of warranty.. etc And all installations are as per the instruction of Engineer - in - charge
OD141004/2025-2026 UV sterlizer - Supply and Installation of UV sterlizer of stainless steel ,UV system 120-240V,40W with Timer, and have one year of warranty, all installations are as per the instruction of Engineer - in - charge.
OD141008/2025-2026 Jumbo catridge filter - Supply and Installation of Jumbo catridge filter, CF100 -100fts Cartridge Filter with 2.0"- 22900 Litres capacity, Compact, low profile UV resistant tank, Easy to access to cartridge element viaheavy duty lock ring, Auto air bleed for removal of trapped airinside filter and reduced the damage of filter, Suitable for pools and spas, fresh or salt water, Quality oil filled pressure gauge for inspection of operating pressure, Manual air bleeding installation with one year of warranty and all installations are as per the instruction of Engineer - in - charge.
OD141005/2025-2026 UV sterilizer - Supply and installation of UV sterilizer of stainless steel, UV system 120-240 V, 40 W with timer, more than one year of warranty, all installations are as per the instruction of Engineer in charge
OD141013/2025-2026 Air blower - Supply and Installation of Air blower ring type Single phase(1.5Hp) of 1.50KW,2.4 m3/hr, 220/240V , of least sound pollution with one year of warranty and all installations are as per the instruction of Engineer - in - charge
OD141015/2025-2026 Air blower - Supply and Installation of Air blower ring type Single phase(1Hp) of 1.20KW,2.4 m3/hr, 220/240V, least sound pollution with one year of warranty and all installations are as per the instruction of Engineer - in - charge
OD141006/2025-2026 1Hp pump-Swimming pool type of Pump 1.0HP, 220V/50Hz, Single phase with following features, *Asynchronous, Two Poles. * Class insulation: 130. * IPX5 Waterproof standard. * Built-in thermal protection. * Overload protection. * Available in 50Hz or 60Hz with 220V/330V/110V, Special design union compatible for both imperial and Metric. * One year of warranty.. etc And all installations are as per the instruction of Engineer - in - charge
OD141018/2025-2026 1/2" SS tube - Supply and Installation of 1/2" SS tube for incubation jar as per the instruction of Engineer - in - charge.
OD141016/2025-2026 Plumbing accessories - Supply and Installation of Suitable Plumbing Accessories and valves required for the the funtioning of Recirculatory Aquaculture System like 4" to 3/4" PVC pipes, valves, fitting... etc as per the instruction of Engineer - in - charge.
OD141014/2025-2026 Plumbing accessories (Reservoir OHT and ETP plumbing accessories )
Bio fencing
2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
50.2.26.1 Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in- charge.
4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.6.1.1 Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
Bidder Name
Muhammed Althaf P K
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1316076.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .