SJMMSVY UDP-88-(2025-26) GRANT

Name Of Work :CONSTRUCTION OF BORE AT DIFFERENT DIFFERENT 3 PLACES OF BAVLA

NAGARPALIKA AT BAVLA.

Schedule-B1 :Drilling of Drilling of 250mm dia X 250 mts deep tubewell. At Ramnagar Water

Work at Bavla Nagarpalika

Sr. No. Description Quantity Unit Rate Amount

1 Drilling 250/300mm dia.Pllot bore at above 250.00 Rmt 749.00

village site in all strata by mud flush direct rotary

Ring from 0.00 mtr. To 250 mtrs. (GWSSB-Mech-

2022-23, It No-1.1 Annexure-A, Sec-A, Page-1)

2 Reaming of 250/300mm dia. Bore hole to 250.00 Rmt. 461.00

following bore hole including assembling, joining,

lowering of housing casing strainer pipes and

other assemble item with gravel packing and

other assemble items with packing and clay ball

packing etc. (GWSSB-Mech-2022-23, It No-1.2

Annexure-A, Sec-A, Page-1)(2)550dia.bore hole

from 0.00 to 300mtrs.

3 Supply of clay ball having size of 25mm to 50mm. 21.00 Cmt. 751.00

(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-

4 Supply gravel of selected size 4mm to 10mm. 29.00 Cmt. 2029.00

(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-

5 Supply of cement. 1.70 M.Ton. 6302.00

6 (a)cement sealling. 1.00 Job 6661.00

7 Lowering and removing of 100 mm dia dropline 250.00 Rmt 148.00

and 32 mm dia airline for development of each

water bearing Zones come across up to full depth

of Deep tubewell of size 200 mm/250 mm/300

mm dia for the tubewell upto 185 Mtr. deep

through suitable air compressor. The job is for

complete period of development. (Where water

level is very deep and 2/3rd submersion is not

achived.) * All the required accessories,

machineries etc for above job will have to be

provided by contractors (GWSSB-Mech-2022-23,

It No-1.4 Annexure-A, Sec-A, Page-2)(B) Air

8 (B3)Development of tubewel: Development of 1.00 Job 27330.00

tubewell zone wise with 900 CFM/200 PSI air

compressor up to availability of sand free

discharge. The Air compressor should run

minimum for six hrs of upto availability of sand

free discharge. (GWSSB-Mech-2022-23, It No-29-

E, Sec-A, Page-17) Pipe and bore material

9 Manufacture, supply and delivery of ISI marked 250.00 Mtr 3570.00

ERW MS pipes conforming to IS: 4270/2001 with

latest amendment. (b) 250 mm dia. (Minimum

(GWSSB-Mech-2022-23, It No-7, Sec-B, Page-18)

10 Slotting of MS ERW blank pipe of following size 93913.00 Per Slot 0.26

having slot size as 6.75 cm x 6.35 cm x 1.59 mm

(including unloading of blank pipes from truck &

reloading slotted pipes into truck). (b) 250 mm

(GWSSB-Mech-2022-23, It No-2B, Sec-C, Page-26)

11 (B) Clamps made from MS plate with 3 holes on 1.00 Pair 2017.73

either side nuts & bolts of standard make &

suitable to 250 dia. Pipe. Size. 900mm X 100mm X

16 mm flat suitable for 250 mm dia. pipe.

(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)

12 (B) Clamps made from MS plate with 3 holes on 2.00 Pair 569.10

either side nuts & bolts of standard make &

suitable to 100/125 dia. Pipe. Size. 450mm X

65mm X 10 mm flat suitable to 65/80 mm dia.

(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)

13 (C) Bore plug having 100 mm height made from 1.00 No 1150.12

MS plate with 3 holes at equal distance on

circumference for nut bolts type locking

arrangement with nut bolts & lock nuts of

standard make etc. complete. (a) for 250 mm

ERW pipes.(Thickness of plate is minimum

mm for top also

(GWSSB-Mech-2022-23, It No-2(B)(iii), Sec-B,

14 (B)MS bail plug having length of 0.45 meter 1.00 No 1054.48

length made from medium class pipe as per ISS

Suitable for 250 mm dia.

(GWSSB-Mech-2022-23, It No-4(A)(e), Sec-B,

15 (B) Steel bent pipes suitable to 250 mm dia. Size 165.00 No 90.80

pipe size 200mm X 150 mm X 6 mm

(GWSSB-Mech-2022-23, It No-5, Sec-B, Page-18)

16 Geohydrological ground water investigation (250 1.00 Job 14286.00

mm dia. Deep T/W with water sample)

(GWSSB-Mech-2022-23, It No-9.1.(b), Sec-A, Page-

17 Electro logging of bore hole 1.00 Job 18000.00

(GWSSB-Mech-2022-23, It No-5, Sec-A, Page-6)

18 Chemical analysis charge of water sample 1.00 Job 300.00

19 Cement grouting / sealing without cost of cement 1.00 Job 13273.00

means of mud pump. (GWSSB-Mech-2022-23, It

No-1.5, Sec-A, Page-1)

20 3 Phase Borewell Submersible Pump Sets 1.00 Set 66833.00

(i) Electric motor driven Borewell submersible

pump set conforming to I.S. 8034 and motor

conforms to IS-9283 working at 3 phase 400/440

volt 50 C/S A.C. supply & 2900 R.P.M.

(ii) cat No 8.5 , Discharge in LPM 800 , Head in

mtr 198 , Mini Motor HP

((GWSSB-Mech-2022-23, It No-1, Sec-E, Page-

21 Microprocessor based soft starter, fully automatic 1.00 No 223073.00

415 V suitable for local & remote pump control

application consisting of incomer MCCB of

suitable rating, semi conductor fuses,

microprocessor based soft starter with built in by

pass arrangement (conforming to IS/ IEC 60947-4-

1-2-3) with RS 485 communication port, external

display unit with keypad including temperature

scanner with minimum 10 channels - suitable for

accepting RTD (Pt 100) /

thermister inputs, digital MFM with RS

communication port, analogue type ammeter with

selector switch, run hour meter, required

protective relays & control accessories. MP based

soft starter 100 HP (ATS)

(GWSSB-Mech-2022-23, It No-2.3, Sec-E, Page-34)

22 PVC insulated flat submersible cable as per 238.00 Mtr 713.00

detailed technical specifications of R/C of GWSSB

conforming to IS 694, IEC 60227 / 60228. 1 R x

(GWSSB-Mech-2022-23, It No-3.1 (E), Sec-E, Page-

23 Supply of various size of ISI marked Heavy duty GI 198.00 mtr 1100.00

column pipe as per

IS: 1239 part I with latest amendment. (Rates are

exclusive of GST) Length: 3 Mtrs.

(GWSSB-Mech-2022-23, It No-22-d, Sec-B, Page-

24 Lowering of three phase submersible pump set 1.00 Job 2000.00

complete with required size & length of column /

HDPE pipes erected by means of proper chain

pully block and pipe wrenches after checking of

threads of each pipe and coupling to take the load

of the pump set and pipe assembly filled with

B) From 90 to 150 meter depth

(SOR 2022-23, Section E, Page No. 92, Item No.

25 Providing & fitting M S clamps fabricated from M 2.00 Pair 569.10

S plate with 03 holes on either side with nuts &

bolts of standard make and suitable size of

following size.(450 mm x 65 mm x 10 mm flat

suitable to 80 mm dia. Column pipe. ) (SOR 2022-

23, Section B, Page No. 21, Item No. 1 C)

26 Providing, supplying and fitting ISI mark CI D/F 1.00 No. 3052.00

Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc.

PN-1 With hand wheel /cap operated (PD type

short body) 80 mm (Civil SOR 2022-23,Pg.-21,

Section A, Item No. 13.1.A3 Labour Pg.-21, Section

B, Item No.15 A )

27 Design, Supply, Installation, Testing, 1.00 No 1686.00

Commissioning of Bourdon Type Pressure Gauge,

±1% accuracy, Direct bottom 1/2" NPT (M)

process connection, IP 67, Glycerine filled, SS304

Case with Bayonet Type Bezel, SS316 L Bourdon

Tube, SS 316 Movement material, Aluminium dial

with black graduation on white background,

Micro Zero adjustable pointer, neoprene gasket,

Blow out disc, shatter proof glass, SS tag plate etc

100 mm dial 0 to 1 Kg/cm2(Mech.S.O.R 2022-

23Sec.F I No 10.1 a Page.No. 138)

Total ( B1 ) :-

Schedule-B2 :Drilling of Drilling of 250mm dia X 250 mts deep tubewell. At ShreeNagar at Bavla

Sr. No. Description Quantity Unit Rate Amount

1 Drilling 250/300mm dia.Pllot bore at above 250.00 Rmt 749.00

village site in all strata by mud flush direct rotary

Ring from 0.00 mtr. To 250 mtrs. (GWSSB-Mech-

2022-23, It No-1.1 Annexure-A, Sec-A, Page-1)

2 Reaming of 250/300mm dia. Bore hole to 250.00 Rmt. 461.00

following bore hole including assembling, joining,

lowering of housing casing strainer pipes and

other assemble item with gravel packing and

other assemble items with packing and clay ball

packing etc. (GWSSB-Mech-2022-23, It No-1.2

Annexure-A, Sec-A, Page-1)(2)550dia.bore hole

from 0.00 to 300mtrs.

3 Supply of clay ball having size of 25mm to 50mm. 21.00 Cmt. 751.00

(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-

4 Supply gravel of selected size 4mm to 10mm. 29.00 Cmt. 2029.00

(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-

5 Supply of cement. 1.70 M.Ton. 6302.00

6 (a)cement sealling. 1.00 Job 6661.00

7 Lowering and removing of 100 mm dia dropline 250.00 Rmt 148.00

and 32 mm dia airline for development of each

water bearing Zones come across up to full depth

of Deep tubewell of size 200 mm/250 mm/300

mm dia for the tubewell upto 185 Mtr. deep

through suitable air compressor. The job is for

complete period of development. (Where water

level is very deep and 2/3rd submersion is not

achived.) * All the required accessories,

machineries etc for above job will have to be

provided by contractors (GWSSB-Mech-2022-23,

It No-1.4 Annexure-A, Sec-A, Page-2)(B) Air

8 (B3)Development of tubewel: Development of 1.00 Job 27330.00

tubewell zone wise with 900 CFM/200 PSI air

compressor up to availability of sand free

discharge. The Air compressor should run

minimum for six hrs of upto availability of sand

free discharge. (GWSSB-Mech-2022-23, It No-29-

E, Sec-A, Page-17) Pipe and bore material

9 Manufacture, supply and delivery of ISI marked 250.00 Mtr 3570.00

ERW MS pipes conforming to IS: 4270/2001 with

latest amendment. (b) 250 mm dia. (Minimum

(GWSSB-Mech-2022-23, It No-7, Sec-B, Page-18)

10 Slotting of MS ERW blank pipe of following size 93913.00 Per Slot 0.26

having slot size as 6.75 cm x 6.35 cm x 1.59 mm

(including unloading of blank pipes from truck &

reloading slotted pipes into truck). (b) 250 mm

(GWSSB-Mech-2022-23, It No-2B, Sec-C, Page-26)

11 (B) Clamps made from MS plate with 3 holes on 1.00 Pair 2017.73

either side nuts & bolts of standard make &

suitable to 250 dia. Pipe. Size. 900mm X 100mm X

16 mm flat suitable for 250 mm dia. pipe.

(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)

12 (B) Clamps made from MS plate with 3 holes on 2.00 Pair 569.10

either side nuts & bolts of standard make &

suitable to 100/125 dia. Pipe. Size. 450mm X

65mm X 10 mm flat suitable to 65/80 mm dia.

(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)

13 (C) Bore plug having 100 mm height made from 1.00 No 1150.12

MS plate with 3 holes at equal distance on

circumference for nut bolts type locking

arrangement with nut bolts & lock nuts of

standard make etc. complete. (a) for 250 mm

ERW pipes.(Thickness of plate is minimum

mm for top also

(GWSSB-Mech-2022-23, It No-2(B)(iii), Sec-B,

14 (B)MS bail plug having length of 0.45 meter 1.00 No 1054.48

length made from medium class pipe as per ISS

Suitable for 250 mm dia.

(GWSSB-Mech-2022-23, It No-4(A)(e), Sec-B,

15 (B) Steel bent pipes suitable to 250 mm dia. Size 165.00 No 90.80

pipe size 200mm X 150 mm X 6 mm

(GWSSB-Mech-2022-23, It No-5, Sec-B, Page-18)

16 Geohydrological ground water investigation (250 1.00 Job 14286.00

mm dia. Deep T/W with water sample)

(GWSSB-Mech-2022-23, It No-9.1.(b), Sec-A, Page-

17 Electro logging of bore hole 1.00 Job 18000.00

(GWSSB-Mech-2022-23, It No-5, Sec-A, Page-6)

18 Chemical analysis charge of water sample 1.00 Job 300.00

19 Cement grouting / sealing without cost of cement 1.00 Job 13273.00

means of mud pump. (GWSSB-Mech-2022-23, It

No-1.5, Sec-A, Page-1)

20 3 Phase Borewell Submersible Pump Sets 1.00 Set 66833.00

(i) Electric motor driven Borewell submersible

pump set conforming to I.S. 8034 and motor

conforms to IS-9283 working at 3 phase 400/440

volt 50 C/S A.C. supply & 2900 R.P.M.

(ii) cat No 8.5 , Discharge in LPM 800 , Head in

mtr 198 , Mini Motor HP

((GWSSB-Mech-2022-23, It No-1, Sec-E, Page-

21 Microprocessor based soft starter, fully automatic 1.00 No 223073.00

415 V suitable for local & remote pump control

application consisting of incomer MCCB of

suitable rating, semi conductor fuses,

microprocessor based soft starter with built in by

pass arrangement (conforming to IS/ IEC 60947-4-

1-2-3) with RS 485 communication port, external

display unit with keypad including temperature

scanner with minimum 10 channels - suitable for

accepting RTD (Pt 100) /

thermister inputs, digital MFM with RS

communication port, analogue type ammeter with

selector switch, run hour meter, required

protective relays & control accessories. MP based

soft starter 100 HP (ATS)

(GWSSB-Mech-2022-23, It No-2.3, Sec-E, Page-34)

22 PVC insulated flat submersible cable as per 238.00 Mtr 713.00

detailed technical specifications of R/C of GWSSB

conforming to IS 694, IEC 60227 / 60228. 1 R x

(GWSSB-Mech-2022-23, It No-3.1 (E), Sec-E, Page-

23 Supply of various size of ISI marked Heavy duty GI 198.00 mtr 1100.00

column pipe as per

IS: 1239 part I with latest amendment. (Rates are

exclusive of GST) Length: 3 Mtrs.

(GWSSB-Mech-2022-23, It No-22-d, Sec-B, Page-

24 Lowering of three phase submersible pump set 1.00 Job 2000.00

complete with required size & length of column /

HDPE pipes erected by means of proper chain

pully block and pipe wrenches after checking of

threads of each pipe and coupling to take the load

of the pump set and pipe assembly filled with

B) From 90 to 150 meter depth

(SOR 2022-23, Section E, Page No. 92, Item No.

25 Providing & fitting M S clamps fabricated from M 2.00 Pair 569.10

S plate with 03 holes on either side with nuts &

bolts of standard make and suitable size of

following size.(450 mm x 65 mm x 10 mm flat

suitable to 80 mm dia. Column pipe. ) (SOR 2022-

23, Section B, Page No. 21, Item No. 1 C)

26 Providing, supplying and fitting ISI mark CI D/F 1.00 No. 3052.00

Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc.

PN-1 With hand wheel /cap operated (PD type

short body) 80 mm (Civil SOR 2022-23,Pg.-21,

Section A, Item No. 13.1.A3 Labour Pg.-21, Section

B, Item No.15 A )

27 Design, Supply, Installation, Testing, 1.00 No 1686.00

Commissioning of Bourdon Type Pressure Gauge,

±1% accuracy, Direct bottom 1/2" NPT (M)

process connection, IP 67, Glycerine filled, SS304

Case with Bayonet Type Bezel, SS316 L Bourdon

Tube, SS 316 Movement material, Aluminium dial

with black graduation on white background,

Micro Zero adjustable pointer, neoprene gasket,

Blow out disc, shatter proof glass, SS tag plate etc

100 mm dial 0 to 1 Kg/cm2(Mech.S.O.R 2022-

23Sec.F I No 10.1 a Page.No. 138)

Total ( B2 ) :-

Schedule-B3 :Drilling of Drilling of 250mm dia X 250 mts deep tubewell. At Town Hall at Bavla

Sr. No. Description Quantity Unit Rate Amount

1 Drilling 250/300mm dia.Pllot bore at above 250.00 Rmt 749.00

village site in all strata by mud flush direct rotary

Ring from 0.00 mtr. To 250 mtrs. (GWSSB-Mech-

2022-23, It No-1.1 Annexure-A, Sec-A, Page-1)

2 Reaming of 250/300mm dia. Bore hole to 250.00 Rmt. 461.00

following bore hole including assembling, joining,

lowering of housing casing strainer pipes and

other assemble item with gravel packing and

other assemble items with packing and clay ball

packing etc. (GWSSB-Mech-2022-23, It No-1.2

Annexure-A, Sec-A, Page-1)(2)550dia.bore hole

from 0.00 to 300mtrs.

3 Supply of clay ball having size of 25mm to 50mm. 21.00 Cmt. 751.00

(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-

4 Supply gravel of selected size 4mm to 10mm. 29.00 Cmt. 2029.00

(GWSSB-Mech-2022-23, It No-13 Annexure-A, Sec-

5 Supply of cement. 1.70 M.Ton. 6302.00

6 (a)cement sealling. 1.00 Job 6661.00

7 Lowering and removing of 100 mm dia dropline 250.00 Rmt 148.00

and 32 mm dia airline for development of each

water bearing Zones come across up to full depth

of Deep tubewell of size 200 mm/250 mm/300

mm dia for the tubewell upto 185 Mtr. deep

through suitable air compressor. The job is for

complete period of development. (Where water

level is very deep and 2/3rd submersion is not

achived.) * All the required accessories,

machineries etc for above job will have to be

provided by contractors (GWSSB-Mech-2022-23,

It No-1.4 Annexure-A, Sec-A, Page-2)(B) Air

8 (B3)Development of tubewel: Development of 1.00 Job 27330.00

tubewell zone wise with 900 CFM/200 PSI air

compressor up to availability of sand free

discharge. The Air compressor should run

minimum for six hrs of upto availability of sand

free discharge. (GWSSB-Mech-2022-23, It No-29-

E, Sec-A, Page-17) Pipe and bore material

9 Manufacture, supply and delivery of ISI marked 250.00 Mtr 3570.00

ERW MS pipes conforming to IS: 4270/2001 with

latest amendment. (b) 250 mm dia. (Minimum

(GWSSB-Mech-2022-23, It No-7, Sec-B, Page-18)

10 Slotting of MS ERW blank pipe of following size 93913.00 Per Slot 0.26

having slot size as 6.75 cm x 6.35 cm x 1.59 mm

(including unloading of blank pipes from truck &

reloading slotted pipes into truck). (b) 250 mm

(GWSSB-Mech-2022-23, It No-2B, Sec-C, Page-26)

11 (B) Clamps made from MS plate with 3 holes on 1.00 Pair 2017.73

either side nuts & bolts of standard make &

suitable to 250 dia. Pipe. Size. 900mm X 100mm X

16 mm flat suitable for 250 mm dia. pipe.

(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)

12 (B) Clamps made from MS plate with 3 holes on 2.00 Pair 569.10

either side nuts & bolts of standard make &

suitable to 100/125 dia. Pipe. Size. 450mm X

65mm X 10 mm flat suitable to 65/80 mm dia.

(GWSSB-Mech-2022-23, It No-1, Sec-B, Page-17)

13 (C) Bore plug having 100 mm height made from 1.00 No 1150.12

MS plate with 3 holes at equal distance on

circumference for nut bolts type locking

arrangement with nut bolts & lock nuts of

standard make etc. complete. (a) for 250 mm

ERW pipes.(Thickness of plate is minimum

mm for top also

(GWSSB-Mech-2022-23, It No-2(B)(iii), Sec-B,

14 (B)MS bail plug having length of 0.45 meter 1.00 No 1054.48

length made from medium class pipe as per ISS

Suitable for 250 mm dia.

(GWSSB-Mech-2022-23, It No-4(A)(e), Sec-B,

15 (B) Steel bent pipes suitable to 250 mm dia. Size 165.00 No 90.80

pipe size 200mm X 150 mm X 6 mm

(GWSSB-Mech-2022-23, It No-5, Sec-B, Page-18)

16 Geohydrological ground water investigation (250 1.00 Job 14286.00

mm dia. Deep T/W with water sample)

(GWSSB-Mech-2022-23, It No-9.1.(b), Sec-A, Page-

17 Electro logging of bore hole 1.00 Job 18000.00

(GWSSB-Mech-2022-23, It No-5, Sec-A, Page-6)

18 Chemical analysis charge of water sample 1.00 Job 300.00

19 Cement grouting / sealing without cost of cement 1.00 Job 13273.00

means of mud pump. (GWSSB-Mech-2022-23, It

No-1.5, Sec-A, Page-1)

20 3 Phase Borewell Submersible Pump Sets 1.00 Set 66833.00

(i) Electric motor driven Borewell submersible

pump set conforming to I.S. 8034 and motor

conforms to IS-9283 working at 3 phase 400/440

volt 50 C/S A.C. supply & 2900 R.P.M.

(ii) cat No 8.5 , Discharge in LPM 800 , Head in

mtr 198 , Mini Motor HP

((GWSSB-Mech-2022-23, It No-1, Sec-E, Page-

21 Microprocessor based soft starter, fully automatic 1.00 No 223073.00

415 V suitable for local & remote pump control

application consisting of incomer MCCB of

suitable rating, semi conductor fuses,

microprocessor based soft starter with built in by

pass arrangement (conforming to IS/ IEC 60947-4-

1-2-3) with RS 485 communication port, external

display unit with keypad including temperature

scanner with minimum 10 channels - suitable for

accepting RTD (Pt 100) /

thermister inputs, digital MFM with RS

communication port, analogue type ammeter with

selector switch, run hour meter, required

protective relays & control accessories. MP based

soft starter 100 HP (ATS)

(GWSSB-Mech-2022-23, It No-2.3, Sec-E, Page-34)

22 PVC insulated flat submersible cable as per 238.00 Mtr 713.00

detailed technical specifications of R/C of GWSSB

conforming to IS 694, IEC 60227 / 60228. 1 R x

(GWSSB-Mech-2022-23, It No-3.1 (E), Sec-E, Page-

23 Supply of various size of ISI marked Heavy duty GI 198.00 mtr 1100.00

column pipe as per

IS: 1239 part I with latest amendment. (Rates are

exclusive of GST) Length: 3 Mtrs.

(GWSSB-Mech-2022-23, It No-22-d, Sec-B, Page-

24 Lowering of three phase submersible pump set 1.00 Job 2000.00

complete with required size & length of column /

HDPE pipes erected by means of proper chain

pully block and pipe wrenches after checking of

threads of each pipe and coupling to take the load

of the pump set and pipe assembly filled with

B) From 90 to 150 meter depth

(SOR 2022-23, Section E, Page No. 92, Item No.

25 Providing & fitting M S clamps fabricated from M 2.00 Pair 569.10

S plate with 03 holes on either side with nuts &

bolts of standard make and suitable size of

following size.(450 mm x 65 mm x 10 mm flat

suitable to 80 mm dia. Column pipe. ) (SOR 2022-

23, Section B, Page No. 21, Item No. 1 C)

26 Providing, supplying and fitting ISI mark CI D/F 1.00 No. 3052.00

Sluice Valves as per IS:14846 (Latest Edition) of

following class and diameter including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc.

PN-1 With hand wheel /cap operated (PD type

short body) 80 mm (Civil SOR 2022-23,Pg.-21,

Section A, Item No. 13.1.A3 Labour Pg.-21, Section

B, Item No.15 A )

27 Design, Supply, Installation, Testing, 1.00 No 1686.00

Commissioning of Bourdon Type Pressure Gauge,

±1% accuracy, Direct bottom 1/2" NPT (M)

process connection, IP 67, Glycerine filled, SS304

Case with Bayonet Type Bezel, SS316 L Bourdon

Tube, SS 316 Movement material, Aluminium dial

with black graduation on white background,

Micro Zero adjustable pointer, neoprene gasket,

Blow out disc, shatter proof glass, SS tag plate etc

100 mm dial 0 to 1 Kg/cm2(Mech.S.O.R 2022-

23Sec.F I No 10.1 a Page.No. 138)

Total ( B3 ) :-

Total ( B1 to B3) :-