REPAIR MAINT TO RCC COVER SLABS NETS POSTS AND FITTINGS AT PARADE GROUND SPORTS GROUNDS AND TRG AREAS UNDER AGE BR I MAINT AT INA EZHIMALA

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

S&F welded steel mesh supplied and fixed complete to wood or steel members. diameter of GI rods used for making welded mesh shall not be less than 4 mm complete all as specified and as directed. Note:- The work shall be done upto a height of 20 mts. Rate quoted will be inclusive of scaffolding required.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similiar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. Note:- The work shall be done upto a height of 20 mts. Rate quoted will be inclusive of scaffolding required.

M&L for providing pre cast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) as in drain cover slabs complete all as specified and as directed.

M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for cement concrete machine pressed chequerred tiles of size 300 x 300 x 20mm thick square in shape of approved tint, as in ramp/stair laid over 20mm thick screed bed in CM 1:4 and pigment to match the colour of tiles complete all as specified and as directed.

S&F MS poles, tubular sections including all necessary drilling, welding, bolting or riveting, etc., and similIar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F PVC coated chain link fencing ( mesh 50 mm x 50 mm size) nominal dia of wire 3 mm ( including PVC coating ) fixed to fencing posts using suitable bolts and nuts (nuts and bolts shall be measured separately) complete all as specified and as directed.

S&F mild steel screw bolt (machine made) 5 to 10 mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long not exc 10 cm long complete all as specified and as directed.

K P DIVAKARAN

LAKSHMI BUILDERS

Benchmark Engineers and Contractors

SANDR

KDR CONSTRUCTION

Sreekrupa Enterprises

PADMANABHAN. K.V

SATHEESAN.T.K

RS ENTERPRISES